Disc burned Idvd not working

I have this 22gb movie that i exported using FInal cut with standard quicktime movie. IT is about 2 and half hours long. I switched my idvd settings to DL DVD but the dvd doesnt play on anything. Not my mac, not my dvd player, not my xbox or wii. What settings should i use to fix this? Should i export the movie to Compressor and then to idvd?

Sorry
Think You missunderstod the reply
Yes the disk image played on DVD player
I used a 2x record speed and still no good
DVD DiskImage - can ONLY play on Your Mac
It is NO physical DVD disk - but an icon on Your Desktop e.g.
You make it in iDVD by selecting
resulting in an icon - Movie.img
and when You click on it it opens as a Simulated DVD (or most often looks like an extra Hard Disk)
Movie
and It has NO Burn speed as it's stored on Your Hard Disk
In this You will find (as on any standard Video-DVD)
Play it with DVD-player tool
If it plays OK with DVD-player tool - burn it by using Disk Util tool and here set burn speed to x2
Do not insert any DVD until You are asked to do so - else You wind up with a Data-DVD - and not a Video-DVD as You would like it to be.
Yours Bengt W

Similar Messages

  • Disc burner did not work

    since i have updated my imac fom 10.3.7 to 10.4.7 it is not possible to burn discs. i don´t know why and i am not very good in mac knowledge. all the time i try to burn the error number 0*8002006D is shown. ans the system says that the burner can not calibrate, because it needs higher energy.
    please heep
    thanks

    Hello Wade,
    the problem seems to be the audio. Give us a little more info on what audio you used in the iMovie project (original audio, music, MP3, Aiff...).
    Also: what audio setting does your camcorder have? Should be 16-bit, 12-bit is a big no-no with iDVD, see this thread:
    http://discussions.apple.com/thread.jspa?threadID=494268&tstart=0&start=45
    12 hours seem a long time to encode 45 min of video ... your mac should be able to do that in 4-5 hours max. I would suggest you convert all MP3 audio to AIFF before importing to iM.
    If your original audio is 12-bit you can try to export the whole audio (original & music) via QT using the audio only option with 24-bit Integer, then re-import into iM.
    Get the latest QT update, if you haven't done so already.
    Also do some basic iDVD troubleshooting:
    1. free some space on the startup drive (15-20GB recommended)
    2. Trash preferences (com.apple.iDVD.plist) and empty trash
    3. Repair Disk Permissions using Disk Utility
    4. Clear Cache Files (Tools: CacheOutX, Onyx)
    Have a look at what John Beatty says in this thread about iDVD trouble shooting:
    http://discussions.apple.com/thread.jspa?threadID=508221&tstart=0
    Third attempt burn to disc image. end up with two folders AUDIO_TS and VIDEO_TS. the audio folder is empty. no image
    the AUDIO_TS folder being empty is perfectly normal for Video DVDs, only music DVDs have audio in that folder
    hope this helps
    mish

  • Media burner is not working in 4s what to do next

    media burner is not working in 4s what to do next

    As when there is a problem with a 3rd party app on your computer, contact the app developer for Media Burner regarding a problem with their iPhone app.

  • My dvd/cd player/burner is not working...

    My dvd/cd player/burner is not working, and I don't want to spend $$$ to fix it. What dvd/cd is available at a good price?

    You have given us little to go on. What Mac product line and model? Different Macs take different optical drives.
    Also, when asking what is available, telling us you general geographic location is a help. That way, someone won't recommend a vendor that cannot ship to your location.
    Although you cannot determine from the non-intuitive forum title Apple chose, the forum you found is for Mac hardware made before 1998. Anything here get very few views. If you have a newer model, we can ge the Hosts to move you to a more active forum and more eyeballs.

  • TS1436 it says "disc burner software not found" what is that mean

    I try to burn a cd off itunes for windows and I get "Disc Burner Software Not Found".. does anyone know why or how

    Hi Jetx273,
    If you are getting an error message of "Disc Burner or Software Not Found" when trying to burn a CD in iTunes, you may want to take a look at the following article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    Regards,
    - Brenden

  • MacBook Pro iTunes says "disc burner/software not found"?

    MacBook Pro iTunes says "disc burner/software not found".  What does this mean?

    Hi Jetx273,
    If you are getting an error message of "Disc Burner or Software Not Found" when trying to burn a CD in iTunes, you may want to take a look at the following article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    Regards,
    - Brenden

  • Why is ken burns effect not working on individual slides I have amended when sent to iDVD

    When making a slideshow in iPhoto, I changed the zoom and scan on individual slides as instructed in the Help dialog; these showed perfectly when played.  However, when I shared the slideshow to iDVD, those particular slides were just 'still' and there was no Ken Burns effect at all.  Why did this happen?

    The Slideshow was created in iPhoto and then shared to iDVD.  The Ken Burns effect works on all the photos that used the basic "Ken Burns' setting.  However, on some of the photos I tried to amend the scanning to zoom into particular faces or parts of the photo.  When I played the slideshow in iPhoto, these amended photos were exactly as I wanted, but after 'sharing' it and viewing it in iDVD, those photos I had altered were 'frozen' and the Ken Burns effect did not work at all, neither the automatic version, nor the specific way I had set it.  All the other photos still had the Ken Burns effect as expected.  I am using  iPhoto 11, 9.1.5, I haven't had this problem in the past.
    If you have any ideas why this should have happened I'd be grateful.
    Thanks

  • DVD burner still not working

    Even with the 10.6.2 update my external firewire dvd burners are still not working with Snow Leopard but they work fine with Leopard.

    Hi KT when I check in the system Profiler I see
    FireWire Bus:
    Maximum Speed: Up to 400 Mb/sec
    (1394 ATAPI,Rev 1.00):
    Manufacturer: Prolific PL3507 Combo Device
    Model: 0x1
    GUID: 0x50770500002EAA
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    (1394 ATAPI,Rev 1.00) Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x12804
    Sub-units:
    (1394 ATAPI,Rev 1.00) SBP-LUN:
    Another thing that I have noticed is that if I unplug then plug the firewire cable from the burner back in whilst a disc is in it then it will mount.

  • Burned DVDs not working on MacBookPro

    Hello - I have authored and burned discs in DVD SP, and they all play fine on my DVD player on my TV set, but are not playing on my MacBook Pro. I put the disc in after Disk Utility shows it's been burned successfully, and after a few 'tries', it pops out, never even mounting on the computer.
    A commercial DVD works just fine on my computer, but none of the recent discs I've burned, yet ones I've burned from the same pack earlier, burned fine... thanks so much!

    Another help source (if you haven't already done so).
    Go to your OS Help Menu. In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to your issue.
    You can also do the same in Disk Utility. Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand. Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Verbatim
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    *Your drive may need cleaning.* Cleaning kits can be purchased from any store that sells CD/DVDs.
    ============
    Check out the following KB Articles: http://support.apple.com/kb/TS2288 Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop
    http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
    !http://i50.tinypic.com/izvwo1.gif!

  • My LG40 DVD burner does not work with iMac. Pls advice

    It is a portable DVD writer. According to LG system requirements are Windows 7 or Mac X v10.54 or higher. Can´t open files burnt on my old Mac and not possible to burn files from iMac.

    Both Rudegar and Babowa are correct!
    You need to supply your own burning software for your iMac to burn discs from your new external optical drive.
    Since Apple doesn't integrate optical drives into many of their Mac models any longer, Apple doesn't supply any type of disc burning software any longer.
    Older versions of the iLife suite of apps (iLife '09 or '11) have a compatible version of iDVD.
    You would need to purchase either of these.
    Another purchased CD/DVD burning software is Roxio Toast.
    OR there is the free, open source optical disc burning software, Burn.

  • Pioneer Blue ray burner does not work in a Mavericks.

    MY Pioneer Blu Ray burner BRD-RW 206D does not work and I get this message (The disc can’t be used because the disc drive is not supported (error code 0x80020025). I have the last firm ware update in it. It worked fine in Mountain Lion but not in Mavericks.

    Hi, everyone
    just wanted to report I've been successfully using my Pioneer BDR-208D for a couple of days now with no further problems.
    I power-cycled and put to sleep the MacPro a few times, and burned a few DVDs and a couple of BD-RE disks.
    So, to summarize my experience:
    Pioneer BDR-208DBK in second (lower) bay
    Mavericks on Mac Pro (early 2008)
    Superdrive in upper bay
    Drive not appearing in eject menu button, alt-eject on keyboard
    dialog pop-up: "The disc can’t be used because the disc drive is not supported (error code 0x80020025)".
    What I did:
    Booted back into Lion
    Inserted non-blank media in the BD drive (a CD in my case)
    Rebooted into Mavericks with the CD still inside the drive
    System found the drive and enable eject both on keyboard and menu
    Disabled "Put hard disks to sleep..." in Energy Saver prefpane - this is what I believe stopped the seemingly random disappearing of the drive
    Hope this helps...

  • Disc burner software not found (iTunes 10.1.2)

    I am using iTunes 10 and have just started having problems in burning CDs within iTunes. I am trying to burn some podcasts on the CD (in audio CD format) and every time I try, I get an arror message that the disc burning software is not found.
    Can anyone help in rectifying this?
    On a different note, does anyone know how to mark a podcast as 'listened to' without listening to it via iTunes? When I burn a podcast to disc, it's not marked as listened to on iTunes and then after about 4 or 5 downloads, it suspends downloads as it thinks I'm not listening to them.
    Thanks

    This is interesting -- I have tried to burn the disc again and now iTunes is working fine.
    I'd say that perhaps I just overworked the drive, but that seems like too easy a solution. I've been noticing some oddities with my video drive lately, so maybe it is related.
    Either way, thank you for your help so far -- I hope it doesn't relapse!

  • IDVD not working right with Snow Leopard...a possible fix

    I was having the following issue with iDVD and my new fresh install on a new hard drive of snow leopard 10.6.4:
    iDVD would open to the screen where you chose what you want to do
    I would click create a new project and get to name it
    Nothing would happen but I knew the program was still running. I could see it in the activity monitor
    I would go to quit iDVD and it would ask me to save changes and the beach ball would start spinning and I would have to force quit from the dock
    Then I found this post after looking litterally all day for a fix....these instructions worked for me and my iDVD is now working normally...
    (1) Go this folder:
    /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Framew orks/
    (2) There should be 3 aliases there:
    ImageIO.framework
    ImageKit.framework
    QuartzComposer.framework
    (3) In my case, the QuartzComposer.framework was actually a folder. I removed this and created a new alias to
    /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzComposer .framework
    After making the new alias, iDVD now works just fine. Not sure why this frameworks folder had become damaged like this. I am hoping that there are no negative effects on any of my other applications, but I've kept a backup of the original folder just in case.
    I moed the quartzcomposer folder to 2 levels back and made an alias and put it in the A/frameworks folder and viola...iDVD worked for me! I am a happy mac user now

    Thanks, had exactly the same problem.
    Switched to administrator
    $ su adminusername
    Navigated to the folder
    $ cd /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works
    Listed the contents of the folder
    $ ls -le@
    Renamed the folder QuartzComposer.framework
    $ sudo mv QuartzComposer.framework/ QuartzComposer.framework.old/
    Replaced with a symbolic link to the correct framework
    $ sudo ln -s /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works
    iDVD works!!!

  • Ken Burns Effect not working as expected.

    Hi,
    I have created a slideshow in iPhoto 08 and want to have all of the slides use the ken burns effect except the first one (i want this to be a 20 second title photo). To get this to work, i have disabled the Automatic Ken Burns effect in the settings menu and then clicked the Ken Burns checkbox in all of the photos from the second one onwards. Even with these checkboxes selected, the photos just stay still and the ken burns effect does not work. Am i going about this the wrong way?
    Any ideas appreciated.
    Joe.

    I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
    Try that first (it is easier )
    LN

  • Discimagemounter and Disc Utility does not work, can't open .dmg HELP PLEASE

    Hello.
    I've got a problem with my Mac when I try to open .dmg files I've downloaded. When I open the file it opens then instantly closes down, and when I choose "open with" and try to open with Disc Utility, it says that it quit unexpectedly and asks me to send a report or close it down. I also tried downloading stuff like "iGetter" to open files with, but since I can't open downloaded files I'm stuck in this mess.
    I can't repair permissions either, since neither Disc Utility or DiscImagemounter works.
    What do I do?

    Backup your files off the machine to a storage drive (not TimeMachine only) disconnect
    Most commonly used backup methods
    then run through these Steps
    ..Step by Step to fix your Mac
    If it's too much for you, call a local professional to assist you.

Maybe you are looking for