Disc Burner not found

After installing 7.6 itunes no longer reads my cd/dvd drives. Is there a compatability problem with Roxio 9

***, a Packard Bell, time for a new comp. That comp is like 10yrs old.

Similar Messages

  • Disc Burner Not Found Windows Vista

    Im getting disc burner not found or burning software not found with iTunes 7.2 using Windows Vista x64
    It worked fine in Windows XP!
    I use a Sony DRU-810A with latest 1.0f firmware.
    Please fix this Apple this is annoying, it worked in XP!

    Im getting disc burner not found or burning software not found with iTunes 7.2 using Windows Vista x64
    the x64 thing may be the key to this.
    check your DVD/CD diagnostics. (in iTunes, go "help > run diagnostics" and select DVD/CD diagnostics.) do you see error 2380 showing up next to the CD or DVD drives in the diagnostics?
    if so, try reinstalling the 64-bit version of the GEAR drivers that iTunes uses for importing and burning. the GEAR drivers are available from the following page. (note that there are two different versions of the 64-bit drivers, so be sure to get the version that matches your hardware):
    GEAR drivers

  • TS1436 when i start i tunes it states registry missing files to inport export cd and when i try to burn a cd it states disc burning not found i re installed itunes still the same

    When i start i tunes i get a message that states missing registry files for import and export files re install itunes so i did same thing and when i try to burn cd's a get "disc recording not found"

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Itunes ver8.0.1 disc burner not found?

    I downloaded the upgrade and tried to burn a cd from a play list. Message in the apple window above the play list said no disc burner foundno software found. Did not have a proble before. Any ideas??

    Hey Jackson,
    This article addresses that error message and provides tips that may resolve it.
    http://support.apple.com/kb/TS2372
    Jason

  • Disc burning not found

    The first time I got this message I spent hours trying to figure it out and gave up. The next time, I uninstalled and re-installed iTunes, assuming it solved the problem. I was able to burn CDs then. Today (about two weeks later) I got the message again, and can't burn CDs without un- and re-installing. What gives? Can you help? I don't want to have to do this every time I purchase something!

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • IMovieHD, "No disc burning drive found" and "The movie could not be sent.."

    First post in these subject forums. I am posting the same problem in iDVD and iMovieHD which were from iLife'05, but I won't post there.
    I loaded iLife'05 and also managed to get iDVD5 loaded although the packaging indicated that I needed to have a 733mhz G4 or faster processor and I have a Prismo Powerbook, 500 mhz and it was successful or maybe not.
    Then I opened iDVD, I got this Error message..."The application iDVD could not be opened because the required hardware could not be found"...which makes sense as I have an external Lacie (CD-R,-RW, DVD-R,-RAM,-RW,R,+RW,R DL) burner that I bought about a year ago that my wife also uses on her G4 tower.......... and I did not have it connected. So I connected it and when I opened iDVD again and it still reads: "The application iDVD could not be opened because the required hardware could not be found." Shut down and reboot, no difference.
    This probably does not have any bearing on the issue but in the System Profiler for "Disk Burning" there is a parameter "Burn Support" which is "Yes (Unsupported)", should this be "Yes (supported)"?
    Question #1: Does iDVD5 only work with an Apple "superdrive" or does it work with other third party "DVD burners" ?
    So I used iMovieHD from iLife'05 to create a project of an old family vacation (from an old 8mm Sony Handycam) and wanted to create a DVD, for archive reasons and to view on TV with a DVD player, but I could not do anything because of different errors now in iMovieHD.
    File > Share...(a window opens and I choose iDVD and then click the "share" button) and this error comes up:
    The movie could not be sent to iDVD, because of an unknown error.
    "Please make sure that iDVD is properly installed, that your project disk has write permission, and that you have enough disk space. (Error 0)"
    Next I tried: File > Burn Project to Disc......and this error comes up.
    No Disc Burning Drive Found
    "If you have an apple-supported disc burner, please check your connections and try again."
    The project file is 5.89GB and I have 57.97GB free on the hard drive so I don't think that space on the hard drive is an issue.
    Question #2: Is the issue of not being able to create a DVD from iMovieHD related to the iDVD issue although the error messages in iMovieHD and iDVD are different?
    Question #3: How are Video DVD's from the Hollywood Studios able to make DVD's longer than 2 hours?
    Thanks all for your help in advance. John

    One more addition to this post, I opened DVD Player and got this error "There was an initialization error. A valid DVD drive could not be found (-70012)
    Maybe this will help give someone a clue.

  • Can't burn a cd." message reads Disc recording not found.any help

    I have download all the new installers ran 64 bits but it won't let me burn a cd from the playlist. Message keeps coming up DISC RECORDING NOT FOUND.
    Any help you could give on this?? This my first time on this site, but I have burned lots of cds in the past with no problems. Thanks in advance.
    Patrick Case
    [email protected]

    Message keeps coming up DISC RECORDING NOT FOUND.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • Im trying to burn a cd but its saying disc recording not found

    I used to be able to burn cd and play them on itunes but now its not working and says either disc recording not found or please enter blank disc even though i have entered a blank disc

    I actually solved this problem myself.  I discovered, while playing around with the new iTunes, that clicking on PLAYLISTS on the menu bar shows the playlists that I have created on the left side of the window (like the old iTunes used to do by default).  I scrolled down to the playlist I wanted to burn to a CD, right-clicked on it, and a menu came up.  I selected DOWNLOAD....this downloads my playlist songs from the cloud to my computer hard drive.  After that, the little "cloud pictures" next to my songs disappeared, and I was able to burn the CD with no problems.
    I hope this helps someone else....I was quite lost for a while.  Which is amazing, considering how user-friendly most Apple products have historically been.

  • I was forced to upgrade to latest version and when I try to burn a disc I receive the message "disc recording not found"

    I was forced to download the lastest version, purchased music, and when I try to burn to disc I receive the following message " Disc recording not found"  Please help very frustrated

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • HT203175 i receive the message "disc recording not found"  would not burn my cd

    I can't burn my cd - I get the following message:  "disc recording not found"?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Trying to burn a cd but getting a message disc recording not found.

    I am trying to burn a cd from a playlist, but I keep getting a message that says 'Disc Recording not found'. Also when I start itunes an error message appears that says "The registry settings used by the itunes drivers for importing cds and dvds are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    I have tried uninstalling and reinstalling itunes, and also repairing and nothing has worked. I have not installed any cd burning software. How can I fix this problem?? 

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • Can't burn cd from iTunes - 'disc recording not found'

    Help!? Have tried to troubleshoot this for days. Have successfully burned cd's in the past...now I just get 'disc recording not found' in message box at the top of iTunes. Does anyone know how to resolve this? Thanks.

    Hi, new to forum - and, like Vikki, I cannot burn a disc from a playlist on my iTunes. Have done so successfully many times in the past. I, too, am getting the flashing 'disc recording not found' in the box at the top of the iTunes page. I have tried so many ways without success. Help??

  • TS1436 when i try to burn a playlist using itunes i get this message at the top of itunes "disc recording not found" any solutions

    when i try to burn a playlist using itunes i get this message at the top of itunes "disc recording not found" any solutions

      Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
    Gateway T5254
    iTunes 10.7.0.21
    QuickTime not available
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002EA6FC09015990
    Current user is an administrator.
    The current local date and time is 2012-10-03 15:59:17.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA , NVIDIA GeForce 6100 nForce 405
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2a5aa2a020c605e8b6db3d153f68aa7e
    The driver AFS.SYS is installed on the system.
    iPodService 10.7.0.21 is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.

  • Cannot burn songs to CD  disc recording not found

    Our PC is Windows XP SP2. I have I-Tunes 7.0.2. I have created a playlist of 1.1 hours of songs and attempting to burn to a 74 minute CD and when I click BURN I get a flashing message of disc recording not found. I have not burned any CDs since I have upgraded to this release. I have also tried another new blank CD with the same message. Any ideas ?

    I have the same message pop up and found out the recording software was removed and I have to reinstall itunes. Do you have any other recording software on your PC? I added WMP and I think that removed it from my itunes. Wish someone would tell us about this nonsense before we do things like that.
    inspiron 8600   Windows XP  

  • No disc burner software found

    so still trying to figure out why i can no longer burn discs and it still says no disc burner software found. here is my diagnostics
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    To be filled by O.E.M. To be filled by O.E.M.
    iTunes 12.0.1.26
    QuickTime not available
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 76CA6FB00DE86C98
    Current user is not an administrator.
    The current local date and time is 2014-12-06 06:06:32.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {7908BCF0-DECD-4FE8-BD26-7154108FE14E}
    Description:             Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:              0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:       Yes
    DHCP Server:         
    Lease Obtained:      Wed Dec 31 16:00:00 1969
    Lease Expires:         Wed Dec 31 16:00:00 1969
    DNS Servers:         
    Adapter Name:        {90C2174E-5C72-4F64-B225-E4F3C957356F}
    Description:             Qualcomm Atheros AR938x Wireless Network Adapter
    IP Address:              192.168.1.9
    Subnet Mask:          255.255.255.0
    Default Gateway:     192.168.1.1
    DHCP Enabled:       Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:      Sat Dec 06 05:46:38 2014
    Lease Expires:         Sun Dec 07 05:46:38 2014
    DNS Servers:          192.168.1.1
    Adapter Name:        {5A1EB27B-5F14-40C0-B0A7-33EA60036A45}
    Description:             Realtek PCIe GBE Family Controller
    IP Address:              0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:       Yes
    DHCP Server:         
    Lease Obtained:      Wed Dec 31 16:00:00 1969
    Lease Expires:         Wed Dec 31 16:00:00 1969
    DNS Servers:         
    Active Connection:  LAN Connection
    Connected:              Yes
    Online:                     Yes
    Using Modem:         No
    Using LAN:              Yes
    Using Proxy:            No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-12-06 06:06:04.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    D: ATAPI iHDS118   7, Rev VL08
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPad 2 running firmware version 8.1
    Serial Number:         DMRJ8RGMDFHW
    **** Device Sync Tests ****
    thank you also using windows 8 didnt know if that mattered
    No iPod, iPhone, or iPad found.

    Hello gonezoe,
    The article linked below details a number of steps that can help restore your ability to burn discs in iTunes.
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/en-us/HT203242
    Cheers,
    Allen

Maybe you are looking for

  • How can I delete an album that had hundreds of wrong songs dumped into it?

    When I was new to mac I messed up my music library when I tried to get my albums (all music really) into iTunes.  Now I have some albums with hundereds of songs.  I cant seem to get them off my system without deleting all the music on my system.  How

  • Itunes 10.6 - will not sync purchased apps - error -42408

    I upgraded the IPAD to the new OS and upgraded Itunes on my windows business vista PC to 10.6 - the restore and sync of the IPAD fails telling me that my computer is not authorized to use the apps - I am unable to authorize it (recieve the -42408 err

  • How to get data from COSP table, field HRKFT as the key to data from PM?

    Dear ladies and gentlemen! I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK). The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for th

  • File upload Fails in FireFox on SunRays

    We can't get File upload to work with a Browser Running under SunRays on FireFox We have finally identified the http problem (http 417) which is causing the IO flash error. We tried this on FireFox 3.0 as well as FireFox 3.5.3 both with the same resu

  • OmniPortlet: getting "500 Internal Server Error" message on edit

    hi, i've installed the jpdk and portalTools on oracle 9ias-rel.2 (portal 9.0.2.6). i can include omniportlets on my pages, but whenever i want to define/edit them i get the message "500 Internal Server Error" from listener (on the edit page). what ha