Disc can not be read from or written to

I've had a huge problem with Itunes over the last few days. Many of my songs have the grey exclamation mark and for some reason itunes cannot locate them. Super frustrating. "The original file cannot be found."I have been able to locate some files but many have been totally lost.
In order to replace the songs I can't find, I'm trying to add them again to itunes (from CDs, etc.). For some reason, when I try to add, I get the following error message "Attempting to copy to the disk "Macintosh HD" failed. The disk could not be read from or written to"
For the love of god please help me before I lose all of my hair. 

Get an external drive and back up as many of your files as you can while you can. You may have to do it folder by folder or file by file. The disk may be corrupt (though for what reason I don't know) or it could be bad.
You want to verify disk, not verify or repair permissions.  Repair Permissions failed probably for the same reason you are having these other problems: there is a problem with the disk.  While you can run Verify Disk, you cannot run Repair Disk on your main drive unless you boot from another drive (such as the Install CD).  If you boot from the Install CD (with the disk in, hold down C while booting) it will ask a few language questions then you'll get to a point where there is a menu bar at the top of the screen. You can run Disk Utility from the menu and do a disk repair.  The repair may fix it but may not.
Third party disk utilities such as Disk Warrior might be able to do more for you than Disk Utility.
And you might want to give Apple Support a call. They are there to help.

Similar Messages

  • I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

    I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
    I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
    Thanks.

    Hi rossfrombluffton,
    Welcome to the Support Communities!  The resource below provides some general things to consider when burning a disc with iTunes.  I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
    Can't burn a CD in iTunes for Windows - Apple Support
    http://support.apple.com/en-ae/HT203173
    Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
    Update iTunes
    Download and install the latest version of iTunes for Windows.Check for unauthorized songs
    iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
    To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
    If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
    If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
    To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
    Check how many times you've burned the playlist
    An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
    Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
    For additional troubleshooting, please see these steps:
    Additional troubleshooting tips for burning issues
    iTunes for Windows doesn't recognize my audio CDs
    Last Modified: Feb 3, 2015
    Have a good day ...
    - Judy

  • Ipod shuffle can not be read from or written to?

    I just bought a used ipod shuffle for my mom and I restored the ipod to original settings and updated software and when I try to add songs it keeps saying ("ipod name" could not be synced. The Disc could not be read from or written to.) Does anyone have any suggestions for me?
    Appreciate it.

    The only thing that I saw that was out of date was the version of Itunes I was using. I updated that and now I am getting a different message. "Can not find the required disk." whats going on.

  • "Disc could not be read from or written to."  ?? :S

    My computer died about 3 months ago for reasons beyond me so I got it fixed, i've finally bothered to download itunes again & it says "the iPod "Hayley's beast" cannot be synced. The disc could not be read from or written to."
    I'm quite happy for it to just wipe my ipod so I can start again but it wont even connect. Then when I go to put music on it the same thing comes up. ummmmmmmm.
    Help?

    Welcome to AD!
    Does it do anything differently if you reset that iPod while it's connected to your PC?
    http://support.apple.com/kb/HT1320

  • The attempt to burn a disc failed. The disc could not be read from or written to.

    I am trying to burn a cd after upgrading to itunes 12 and this message keeps coming up."The attempt to burn a disc failed. The disc could not be read from or written to." there is no problem with my hardware since I can burn cds using nero. Please help. Thanks

    Here is a solution that worked for me!
    1. Uninstall iTunes 12
    2. Download and install iTunes 11.4
    3. Run iTunes 11.4. You will get a message that the library was created by a newer version. Just dismiss the message.
    4. Uninstall iTunes 11.4
    5. Install iTunes 12.0.1 again. This time disc burning should be working.
    (The prior installation of 11.4 fixes the issue)
    I hope this works for you as well
    Note
    My iTunes 12.0.1 installation was a fresh one to start with. I am using the x64 version on Windows 8.1 x64.

  • The disk can not be read from or written to?

    When I try and update my Ipod, it gives me this message 'The disk can not be read from or written to' And its really getting on my nerves, How do I fix it so I can actully put music on my Ipod?
    VulCAN   Windows XP   none

    This link should help you troubleshoot your error.
    http://docs.info.apple.com/article.html?artnum=301267

  • "Device can not be read from or written to" error keeps coming up...

    I have recently updated to the 3.1 firmware on my iPhone 3G (after a couple failed attempts).
    The problems seemed to start there when the update froze midway through and I had to try a couple more times. After I did and restored my settings, iTunes said that my backup file didn't work. I tried a couple more times to restore from the backup but ended up having to restore as a new device.
    Now, as I try to sync all of my, well, everything, I keep getting an error message.
    It synced all of my contacts, apps, calendar, etc., but when it gets to my music and videos it will sync a bit of it before giving me the error messages:
    "Cannot sync ___, the required disk is not found"
    and immediately after,
    "Device can not be read from or written to."
    I've tried syncing my iPhone many times, and these errors keep coming up.
    What should I do?

    Hi,
    This article: http://support.apple.com/kb/HT1207 provides tips that will resolve issues causing this message to appear with iPhones and iPods.
    Make sure the iPhone is directly connected to a high-speed USB2 port on the PC, using the cable that came with it.
    -Jason

  • Disk can not be read from or written to

    This iPod nano second gen is brand new. Bought it today and I put like 10 songs and 10 photos on for my sister and now it's saying "disk can not be read from or written to" and now it's not showing up in iTunes or "My Computer". Help, please?

    Is there an error number listed in the message? This would be helpful. You may also want to check for other threads that may have already answered your questions before posting. Another good option even before using the forums is to go to the iPod nano support section and then search through the articles for possible solutions. The links I have provided to some of your threads have come from aquick search of the problem you listed starting on the main support page Support.

  • Touch can not be read from or written to

    After upgrading to iTunes 7.7.1 and iPod 2.0, I can not sync at all anymore. I get an error window telling me that my sync failed because my iPod Touch can not be read from or written to. I applied the "5 Rs" troubleshooting tips, to no avail. (5 Rs = restart, reset settings, reset iPod, remove files, restore).
    I went to the Genius Bar & they were able to eventually get it to sync, but replaced the unit anyway.
    I got home with my new iPod Touch and it had EXACTLY THE SAME problem as my old one did - the "could not read from or write to" my iPod Touch.
    I have a new appointment for next week at the Genius Bar.
    Has anyone else experienced this problem or know what the fix might be?
    I want to try restoring to the iPod 2.0 or prior iTunes software, but can not figure out how to do that.
    All help/suggestions are welcome!
    Heidi

    one of the solutions fixed the error on my itouch:
    Symptoms
    When using iTunes to sync photos to iPod and iPhone, iTunes creates a folder called iPod Photo Cache in the top level of the folder you selected for your photos. Picking another folder to sync does not erase the previous iPod Photo Cache. Depending on how many photos are being synced, the hard drive could fill up.
    Products Affected
    iPhone, iPod with color display, iPod photo, iPod nano, iPod nano (2nd generation), iPod (5th generation), iPod (5th generation Late 2006), iPod touch, iPod classic, iPod nano (3rd generation)
    Resolution
    Drag the folder named iPod Photo Cache to the Trash or Recycle Bin.
    If you're syncing from an iPhoto `08 album, use these steps to find the iPod Photo Cache:
    1. Go to your Pictures folder (~/Pictures) and locate the iPhoto Library file.
    2. Control-click the iPhoto Library file and choose Show Package Contents from the shortcut menu.
    3. In the iPhoto Library window, locate the iPod Photo Cache folder and drag it to the Trash.
    4. Close the iPhoto Library window.

  • Can not be read from or written to

    OK, so I've had my Gen 3 for several years, I recently restored it and formated it for my windows machine to transfer some files from my windows to my Mac.
    Upon restoring it back and refortmatting it to Mac, I learned that it now gives me an error message when adding playlists that says:
    "this ipod can not be read from, or written to"
    any idea what that is all about?

    Have you had a chance to look at this troubleshooting document? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

  • When syncing photos getting error iPhone can not be read from or written to

    I am getting an error only when I try to sync photos. Error is iPhone can not be read from or written to. This only happens when I am syncing photos, so far everything else syncs fine. I have an iPhone 3G S. I had some pictures on the iPhone that I deleted, still no sync. I am restoring the iPhone right now.

    I am having the same issue. I get "iphone unable to sync, an unknown error occurred (-51)" I have restored twice and once even set up as a new iphone. Nothing so far has worked. If anyone has any suggestions, please pass them on

  • Error: This disc could not be read from or written to....

    Hi,
    Just got a new ipod video 30g. When transferring songs, fails after a while....transfers some songs then this error pops up:
    "Attempting to copy to the disk 'Joe's Ipod'failed. The disc could not be read from or written to."
    I've searched this in the help section and this page comes up:
    http://docs.info.apple.com/article.html?artnum=301267
    But my computer software is very minimal..and Windows XP is up to date. Cords appear fine and not loose...
    HAVE NO IDEA What the problem is. I've tried restoring it to original settings. I've even reinstalled iTunes...
    Anyone know what to do?
    Is my iPod just faulty?
    Ipod video 30g   Windows XP  
      Windows XP  

    Hey there,
    Have you tried any of the troubleshooting techniques from below? Check it out. Hope it helps.
    http://support.apple.com/kb/HT1207
    B-rock

  • Error Message 'Disc could not be read from or written to'   HELP!!!!!

    I'm a novice at all this, so any sympathetic help would be really welcome. I have downloaded the uptodate iPod and iTunes updates but I still keep getting the failure message ' Attemting to copy to iPod failed. the disc could not be read from or written to.' It is downloading some music, on occasions, but not all. What is wrong? Is my iPod faulty? Any help would be welcome.

    Thanks Jeff. Only thing that rings true is updating OS; when I tried to downoad 10.4 message said I 'could not on this computer'. Since I purchased and installed 10.3 a year ago I don't understand. Also, iPod was downloading perfectly until two days ago when -36 appeared. Bummer. I am not a techie, Apple tech support does not have a clue, and iPod is useless. Ideas?

  • "The disc could not be read from or written to"

    I have a 80G Classic and when I tryed to sync it with iTunes for the first time I got this message "Attempting to copy the disc Classic (iPod) failed. The disc could not be read from or written to. I have restored and rebooted the iPod and the Mac. When I synced it again it synced for a while and put one album plus calendar and contacts on the iPod, then the same massaged appeared and the sync stopped. Any ideas please?

    See if this troubleshooting article helps.
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • I firewired I-tunes music from crashed I-mac to a new I-mac. Then tried to sync my I-pod w/ the new computer and got messages "I-pod cannot be synced". Also, "the disc could not be read from or written to- you don't have the privilege to make changes"

    I firewired my i-tunes library from my old computer to a used I-mac which I bought. All purchased songs & playlists
    were succesfully transferred. When I tried to sync my empty I-pod to the used I-mac I received these messages.
              - I-pod cannot be synced
              - The disc could not be read from or written to
              - You dont have the priveledge to make changes.
    This is all my music legally downloaded and purchased from I-tunes. How to I circumvent this barrier?
                         Thanks, jaime

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

Maybe you are looking for

  • Creating physical standby database from another physical standby database

    hi, We have one production database and one physical standby of the production. Now we have situation where we need to create one database from either production or from standby. As production is loaded we can not do it using active database option.

  • How to export an infoset......

    Hi All i had copied two additional fields to the existing infoset with different name. adn i had generated that infoset in DEV10 now that i want to export that infoset to the DEV20 , so that it will be available for testing. can any body tell me how

  • DSC alarm API Timestamp

    Hi, We are currently building an application for electrical systems using cRIO and DSC HMI features. Our intention is to generate alarm condition in cRIO and display the alarms on HMI-PC using the DSC alarm API. We are looking for a very precise timi

  • Import solaris media - please remind me

    Hi, I am on N1SPS 5.2. I've already imported created profiles for various releases of Solaris throughout the year, but I've forgotten what to do! Can someone please remind me? What I have so far: Solaris 10 807 media NFS mounted to my workstation, wi

  • Entry String

    Is this someone would have this function already? To finish a program I would have need of a function that controls what is introduced, if he/it is in the shape of one date as (04 07 2003, 4 7 03, 4.7.03, 4/7/2003,....) that accepts the separator spa