Disc Copy with no audio

I am trying to copy a disc into FCP so I can edit it and create a video show. When I try to copy the disc into the bin All I get is video no audio. It is a VOB extension. Is there a way to get them copied over together?

#7 DVD into FCP
Shane's Stock Answer #7: Importing DVD footage into FCP
To start, I will state that trying to capture any DVD you bought or rented, be it a Hollywood movie or exersize video, is illegal. I will not give you any tips on how to bypass copy protection. It is there for a reason.
To capture footage from a DVD, you have a couple options.
1) Route the DVD player to your DV camera or deck via the RCA cabling. Then you can put the footage you want ontp DV tape and have the benefit of timecode in case the need to recapture comes up.
2) Or you can use MPEG Streamclip. This is free. http://www.squared5.com/
Shane

Similar Messages

  • Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

    I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It  has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs.  What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc.  This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system.  This happens whether I trying to Play a disc or burn the disc to the hard drive.  The drives work great though as they do play DATA discs all the way through. MP3 discs play fine.  It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back  from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything.  Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help.  Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

    Hi,
    All dimms work individually?  Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive?  I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk?  Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
    You have some options to consider once you can stablize your PC for updating the BIOS.
    Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
    Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
    Try a bootable BIOS update process as suggested at this site. --  less safe but doable
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Burning a DVDSP2 project  with disc copy?

    I tried burning a DVD (1-4X media) using disc copy (Jag 10.2.8) at 1x but it burned at 4X. I used img created from DVDSP2. Is the img file DVDSP2 created locked in to only burn at the max. speed based on media-burner speeds-the same as burning directly from DVDSP2? Is there a way to burn a DVDSP2 project at 1X using disc copy or do I need Toast?
    Thanks
    Della

    Silal:
    size is 4.02 G DVD5 disc. I have a 1-3 duplicator with Pioneer DVR-111 drives and even when I set burn speed to 1X & burn from the harddrive (DVDSP2 project), with new
    1-8X Taiyo Yuden media, it will burn at 4X speed. The seller told me some Pioneer drives will burn at a minimum of 4X when using new high speed media?, which I guess is what the Taiyo Yuden 1-8X media I have is? Is he correct about this? I assumed if DVD media is 1-8X then 1X burn should be possible regardless of the drive type? When I burn older 1-4X dvd media, the duplicator via harddrive (loaded with DVDSP2 project from a disk copy-burned DVD) will burn a DVDSP2 project DVD at 1X. But when I burn this same 1-4X media in my G4 MDD-pioneer 105 burner-burning a DVDSP2 project (using disk copy- img file) it burns at 4X, even though I set it to burn at 1X?
    So am I correct in assuming this has to do with the img file being created in DVDSP2, even though the DVD is burned using disk copy?
    Della

  • Copy Video WITH the audio

    I have added an extra audio track to a very long project and everything is synchronized the way it needs to be. Now, I want to copy a section of that project to a new project. If I copy and paste, it works fine, except it won't copy the extra audio track.
    Is there any way to do this without having to resynchronize the audio track?

    I'm guessing this is not possible. The sad part is that I used the extra audio track in the first place as a way to work around the limitation of iMovie, namely the fact that you can't do ANYTHING with audio.
    I exported the audio so that I could do just a simple EQ and compression on the audio source, and the added it back in to the project.
    That worked great for the overall project, but now that I want to trim out sections for Youtube, I'm screwed. There is apparently NO WAY to trim section and/or cut out sections and still have the extra audio track stay in sync.
    I was REALLY hoping iMovie 09 was going to be usable this time, but I guess it's back to Final Cut...

  • Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it.   Please could someone help me?

    Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it.   Please could someone help me?

    You appear to be having a hardware problem. Make an appointment at the Genius Bar of your nearest Apple Store to get a diagnosis.

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Copy and Paste audio track MIX from one track to another??

    Hi
    What's the best way to handle this.
    I have a video with one long music track, that I mixed using Adobe Premiere's Audio Mixer.
    The musician made a new version of the track with some very slight modifications in the music.
    Rather than having to remix the entire new track, I would prefer to either:
    1) Copy and paste the attributes of the orginal audio track onto the new music track -- retaining the Mix I did from the original mix.  Is this possible?  I tried it once and it did not seem to work.  (I used the Mixer, not keyframes, to do all of the mix.)
    or
    2)  Is there a setting in Premiere's Audio mixer to "gang" the new track to the old one -- with the new track cloning the old track's mix.
    Or would it be better to bring the two audio tracks into Soundbooth and do it there?
    Thanks,
    ...Rowby

    Thanks Colin
    I did a complicated mix on one long background music track and was not looking forward to doing that remix because of various minor music changes made by the musician scattered throughout that long track.
    Your Alt (for replace solution) worked perfectly and saved me a ton of time.
    The fact that Copy attributes for Audio doesn't work for copying audio keyframes is another reason do do audio mixes using the Mixer instead of using keyframes to adjust volume.
    ...Rowby
    P.S.   And a big LIKE to Adobe's clever programmers for including features like these.

  • I would like to copy music and audio books that I downloaded from cds from my ITunes to my Smartphone.  Does anyone know how to do this?

    I would like to copy music and audio books that I downloaded from cds from my ITunes to my Smartphone.  Does anyone know how to do this?

    you would have to read the directions that came with your smartphone to learn how to put content on it.
    Itunes syncs with Apple devices.

  • Any FLV files with Nellymoser audio are required

    Hi,
    I'm writing a converter of FLV with Nellymoser audio into MP3
    format.
    I've tested it with NM audio of 8 kHz, but I need yet to test
    it with
    audio of higher sampling rates (like 11 kHz, 22 kHz and 44
    kHz).
    Could anybody help me with a small sample of FLV file,
    encoded with
    Nellymoser audio with a sampling rate higher than 8 kHz?
    Thanks in advance.

    I just found the problem. Even though my Perian SAID it was up to date, it was only at 1.1.1. My old system that worked correctly still had Perian 1.1.3. I copied that component over and it works fine with the problematic FLV files.
    Find it at:
    (user folder):Library:QuickTime:Perian.component

  • Any FLV files with Nellymoser audio is required

    Hi,
    I'm writing a converter of FLV with Nellymoser audio into MP3
    format.
    I've tested it with NM audio of 8 kHz, but I need yet to test
    it with
    audio of higher sampling rates (like 11 kHz, 22 kHz and 44
    kHz).
    Could anybody help me with a small sample of FLV file,
    encoded with
    Nellymoser audio with a sampling rate higher than 8 kHz?
    Thanks in advance.

    I just found the problem. Even though my Perian SAID it was up to date, it was only at 1.1.1. My old system that worked correctly still had Perian 1.1.3. I copied that component over and it works fine with the problematic FLV files.
    Find it at:
    (user folder):Library:QuickTime:Perian.component

  • Make a slidshow with stills, audio & video??

    I am losing it here! My daughter's 1st birthday is next weekend and I am scrambling to make a video of her first year for a keepsake and to play at her party. I was using windows movie maker but all of my video clips were the wrong format, so I tried to convert them using vixy.net but it wasn't working. . . so I spent the $30 and got quicktime pro and now it looks like it wont let me do what I want either. I want the movie to be mainly pictures but throw in quick video clips here and there with a 3 song soundtrack underneath. Does anyone know if this is possible and if so a quick/easy way to learn to do it? Thanks!

    QuickTime Player Pro can do the job but it takes a few steps and some practice to get things right.
    First step would be gathering all of the "parts" and making sure they are QuickTime compatible formats. You should have no trouble with any image format but the audio tracks must be something you own and supported (.mp3 files would work just fine).
    The video tracks must play without issue in QuickTime Player. They will determine the file dimensions of your "birthday video" so you should plan on resizing your image files to match it.
    Pen and paper works best as your first editor. Organize the resized image files and give the files descriptive names so they are easy to find. Note the "time" of your video tracks so you can pace the still images.
    Editing with QuickTime Player Pro works best if you use the keyboard shortcuts so I'll explain the basics:
    You edit by making "selections". You view these selections using the "timeline" (area of the QuickTime controller). The "dark area" (of the controller) between the in and out markers is where a "paste" or "Add to Movie & Scale" would appear. The same selection can be copy/pasted for use in other parts of your project.
    The letter i and o keys mark a selection (in and out points).
    On a Windows computer the "Control" key is the modifier for keyboard shortcuts. Hold it down while you use the other letter key. The right/left arrow keys
    Control-o = Open (use this for your image, video and audio files). They will open in a new Player window.
    Control-a = All (use this for the still image files prior to a Copy).
    Control -c = Copy (this file is stored in a temporary location and only the last one will be available).
    Control-v = Paste (inserts the stored copy data).
    Edit menu "Add to Selection & Scale" is what you'll use most other. This gives "time" to still images added to an audio track. Not typically used for audio or video tracks as it will speed up or slow down those tracks.
    The right/left arrow keys allow you to step through "frames" for more precise editing.
    Open your audio tracks, make your selections, copy them and add them together to build your timeline. This will become the base for all of your other work. Occasional "Save As" is prudent to prevent loss of your work. QuickTime Player Pro includes an "Undo" (Edit menu) that also remembers the previous edits.
    With your audio track as your base you can add additional "tracks" (QuickTime .mov container can hold up to 99).
    Open your supported video track, select all (or the portion you wish to use) and Copy.
    Make your selection in the audio timeline (the other open window) and either Paste or Add to Selection & Scale. Do the same with your properly sized image files (but always use Add to Selection & Scale). Preview playback and Undo if needed until you are happy with the outcome.
    Your added image tracks will be "static" (no transitions) but with a good subject and the proper audience no one will care.
    http://homepage.mac.com/kkirkster/03war/
    One of my files made in 2003 with QuickTime Player Pro. Still images, short video, layers and "masks" and a base audio track. Text track at the end of the file.

  • Export to Quicktime with multiple Audio Tracks?

    Hi all --
    I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
    Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
    However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
    Can anyone help?
    Thanks!

    Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

  • I make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

    i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

    What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
    I know this is not the best fix, but it might work.
    You can duplicate an edit in the main screen, then delete the last bits and export,
    do the same for the other half.
    Then import the two bits (or more if you need) in a new edit.
    Out of curiosity, can you post what format the video is in?
    Copy a video straight from the camera to your computer.
    Open it in Quicktime player, and with out playing type Apple + i
    or Control + i for PCs
    It should tell you lots of info about the video, and might help us to see what is wrong.
    This is what it looks like:

  • Can you export a Quicktime with multiple audio tracks?

    I have a video with split audio tracks.
    I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
    the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
    I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
    have they just not been integrated yet?

    Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Maybe you are looking for