Disc creator Audio CD with no more than 13 tracks

Hi, I tried twice and had the same problem, I couldn't burn an audio CD with more than 13 tracks, although I chose 19 songs, the final CD had only 13 songs

Do you use your Vaio Update for updates, kingdom? If so, check in there to see if you're also up to date on your video card drivers and BIOS. (Your downloads page at Sony UK shows some updates for those there, so we'd better check on them too.)

Similar Messages

Convert and save video, audio, and images to more than a hundred standard f

I bought Quicktime pro because it said it could "Convert and save video, audio, and images to more than a hundred standard formats". I have .mov that i took and want to change to an .avi
I feel stupid but how do i do it? shouldn't there be a "convert" or "save as" button?

AVI isn't dead, it remains the ONLY format in which any real editing can be performed (ie filters and colors and zooms etc). That said, converting FROM any compressed format like .mov back to an uncompressed format will not restore the information lost in the original compression conversion. Like the man said, you probably won't like the result. If you want to make an AVI to edit artistically, you'll need to go back to the source and re-record it to make an original uncompressed avi (example I use 'DVD to AVI converter' software to recode my homemade DVDs to a huge uncompressed AVI, then play with cutting and cropping and zooming and special effects and color filters, etc in a program such as VirtualDub, an THEN open in QT Pro to convert to MOVs to share).

Outofmemory while creating a new object of file with size more than 100 MB

I have created an application which generates a report by getting the data from our archived files (.zip file).By the time, the application is reaching a file with size more than 100 mb, it is running out fo memory while creating the object of that particular file. Can some one help me by tellin if there id way to resolve this issue?
Thanks in advance

If you're getting OutOfMemoryError, the simplest thing to try is to give the VM more memory at startup. For Sun's VM, I believe the default is 64 MB. You can increase this by using the -X args that control the heap size. For example: java -Xms128m -Xmx256m ... etc. ... This says start with 128 MB of heap, and allow it to grow up to 256 MB.
One thing to consider, though, is do you need that much stuff in memory at once? A more intelligent approach might be to unpack the archive to the file system, and then read a file at a time or a line at a time or a whatever at a time is appropriate for the processing you need to do.

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

Couldn't Upload file with size more than 2K

Hi,
i am developing an webapplication where in i have to upload a file.we are using hibernate for data storing and retrieval.problem comes when i am uploading a file with size more than 2k bytes.if the file size lesser than 2k it works fine.i found that its a bug with thin jdbc driver version 9.but i am using 10g jdbc driver.still problem exists. i am not suppose to use oci drivers.
working on
OS: windows Xp.
Apps :weblogic8.1
DB: oracle 9i
if anyone has solution plz mailme at [email protected]

I'm not sure where the issue would be. Are you saying that you are using a 9i driver to access a 10g database? If so, download the newer driver and add it to your WEB-INF/lib directory. Remove the existing driver.
If, on the other hand, you are using a 10g driver for a 9i database, I would not expect problems. However, you could always download the older driver and try it out.
Or am I missing something?
- Saish

Send an attachment in email with length more than 255 char per line

Hi All,
I have to send an attachment in email with length more than 255 char per line. I dont want to break the line after 255 char and add it in another line.
Please suggest me any function module which can perform this.
Thank you all.

I looked at all threads in the forum, there was about 5 or 6 identical questions, but surprise, nobody knows! It seems that SO_NEW_DOCUMENT_ATT_SEND_API1 function module does not allow more than 255 characters by line.
It would surprise me a lot if there is no workaround !
As it is very easy to add any binary attachment which is like a very long line, PDF for example (several kilobytes), via the function module above (lots of examples in the forum), I would advise you to try to use the same way, i.e. use the contents_bin parameter instead of the contents_txt parameter (convert the text into binary) and add the line feeds yourself (okay I know, it's not very smart).
Last thing, this function module is deprecated, and we should use BCS classes, maybe they work better.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with Assigning more than one value to GROUP dynamically

Hi,
I have a problem with assigning more than one value to GROUP varible dynamically.
I am able to assign only one value dynamically through Initialization block
I have even tried with the ROW-WISE initialization blocks..
using this query..
SELECT 'GROUP', G.GROUP_NAME
FROM GROUP_MAP G
WHERE G.USER_NAME = ':USER'
if GROUP_1, GROUP_2 are two groups to be associated,
through this, i'm getting " GROUP_1;GROUP_2 " into GROUP variable ( seen from Narative view )
And the properties and securities of this Groups are not inherited.
Please let me know if there is any other way to Populate the GROUP variable dynamically with more than one value.
Thank you.,

Hi,
i finally got in this way..
i had created a function which takes USER_NAME as input and returns a string that contains the GROUP names with semicolon delimeted..
Though it is same as that of ROW-WISE initialization,
the properties of those groups are also being inherited..
Now, i can assign more than one groups and its properties to a user dynamically.

How can i send an email with subject more than 50 char.

Hi
Can you please explain How can i send an email with subject more than 50 char?? I am using Cl_BCS=>SET_MESSAGE_SUBJECT but it is throwing an error " An exception of the type CX_SY_REF_IS_INITIAL has occured which is not caught" .
Regards
Alok

Try using the following FM
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = i_mail_data
        put_in_outbox              = c_x
      TABLES
        packing_list               = i_objpack[]
        object_header              = i_objhead[]
        contents_bin               = i_objbin[]
        contents_txt               = i_objtxt[]
        receivers                  = i_receivers[]
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
      OTHERS                     = 8.
Regards
Avinash
Edited by: Avinash Jagtap on Dec 2, 2009 7:00 AM
Edited by: Avinash Jagtap on Dec 2, 2009 7:02 AM

How to RECORD more than ONE TRACK at a time ? ? ?

I have looked, read and tried - but cannot enable more than one track at a time... How do you do it?
I am using a Lexicon Omega USB interface. With two mics plugged in to it, I am able to assign MIC 1 to a track, and MIC 2 onto a different track. However, cannot get BOTH tracks to go "live" at the same time.
Thanx: Stacey

"basic track" is a short cut. whenever i explain something to someone recording an audio instrument i always tell them to create s New Basic Track. it's simple, to the point, has no effects on it (and you can add those later, anyway, the BEST way to do it)
however, either would not cause the issues you're dealing with at the moment, both are valid. Basic just skips a step.

Can takes from more than one track be comped at the same time?

Greetings,
I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542&#9527542), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
Any suggestions?
Thank you.

You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.

Cheap way to record more than 12 tracks?

Hi all!
I´m looking for a lo-cost solution to record more than 12 tracks simultaneously. While 12 tracks is enough for most of my projects, I do some occasional live gig recordings where I take the feed from FOH mixing desk direct outs to my M-Audio FW1814 interface. More often than not 12 tracks is not enough so I am forced to leave out some channels, which I hate to do.
However I don´t want to pay the extra cash for Logic Pro, since outside the track number restriction, the features of LE are more than sufficent for my needs.
So I am thinking of using some other multi-track software for live recordimg and then exporting the tracks to LE for editing and mixing.
Audacity claims to support up to 16 simultaneous tracks, but I haven´t been able to achieve that. I could be doing something wrong, since the documentation doesn´t really shed any light on the subject. Does anyone here use Audacity for multi-track recording?
Any other alternatives? Keep in mind that I don´t really need any fancy features outside the recording itself.

what version of LE are you using?
i think that version 7.2 up'd the simultaneous IO of
LE.
I don´t think so. I browsed through the "New features in LE 7.2" document ( http://manuals.info.apple.com/en/NewFeatures_in_Logic_Express7.2.pdf )and didn´t find any mention about i/o. I´m using 7.1.1 or whatever the last update for 7.1 was.
As NoEQ has mentioned M-Powered Pro Tools is at your
disposal. If you search the internet you can find
the academic version (included the dv toolkit) for
$150 dollars.
The problem is that I live in Finland and I doubt there´s any academic versions for sale here. And 150$ is still a bit much for me. This gig recording thing is really just a hobby for me, so I don´t want to put too much money (which I dont have anyway...) in it.
you could just as easily send some of the tracks off
the board to a bus and then record a sum of the bus
and some out of the direct outs.
Yeah, I´ve done that couple of times and it usually works fine, to be honest. But it is still a bit frustrating to not have the whole capacity of my hardware in my disposal, just because of an artificial software restriction.
But thanks to everyone that have participated in this thread. I´m still considering my problem unsolved, so feel free to chime in.

How do you enable more than one track at a time?

Couldn't find it in the help portion of the program. I am beginning to believe I have an incomplete help document. Anyway, I want to record more than one track at a time, for example vocals and guitar, while being able to monitor them. Thanks. btw why is this forum so slow? It like totally runs fine till I sign in to my user account. Then it's as slow as a cyber snail.

Okay, I will try that. I have one last question pertaining to this. Will this work if I am using a condenser mic on phantom power through a midi device while plugging the guitar through the same midi-device? I will try a few things either way but I thought I might ask before hand.

Sending mail with excel more than 255 character in a line

Dears,
In my program , I use SO_NEW_DOCUMENT_ATT_SEND_API1 to send email with EXCEL attacment.
But when i want output a line more than 255 characters in the excel I met the problem, it only appeared 255 characters
describe table mailbin lines tab_lines.
    mailpack-transf_bin = c_checked.
    mailpack-head_start = 1.
    mailpack-head_num = 1.
    mailpack-body_start = 1.
    mailpack-body_num = tab_lines.
    mailpack-doc_type = c_xls.
    mailpack-obj_name = space.
    mailpack-obj_descr = lv_mail_title. "the excel file name
    mailpack-doc_size = tab_lines * 255.
    append mailpack.
* Sending the document
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        exporting
          document_data              = maildata
          put_in_outbox              = space
          commit_work                = c_checked
        tables
          packing_list               = mailpack
          object_header              = mailhead
          contents_bin               = mailbin
          contents_txt               = mailtxt
          receivers                  = mailrec
        exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
          others                     = 99.
But i have to output those characters in one line.
Anyone could help me?
Thanks a lot.
Sincerely,
Julie

data: objpack    like sopcklsti1 occurs 2 with header line.
data: objhead    like solisti1 occurs 1 with header line.
data: objbin     like solisti1 occurs 10 with header line,
        is_objbin type solisti1 .
data: objtxt     like solisti1 occurs 10 with header line,
        is_objtxt type solisti1 .
data: l_tab(1)   type c value cl_abap_char_utilities=>horizontal_tab,
       con_cret   type c value cl_abap_char_utilities=>cr_lf.
data: tab_lines like sy-tabix,
        : tab_lines1 like sy-tabix.
data : lenth_string type string,
        s_string     type string.
data : L type i, i type i,cplen type i, balance type i,
before describe table mailbin lines tab_lines ... Use below logic.
Loop at your_internaltable.
concatenate field_1
            field_2
            field_3
       into lenth_string separated by l_tab.
concatenate lenth_string con_cret into lenth_string.
concatenate s_string lenth_string into s_string.
endloop.
       L = strlen( s_string ).
       i = 0.
       cplen = 255.
       balance = l.
    do.
      if balance <= 0.
        exit.
      endif.
      if balance < 255.
        cplen = balance.
      else.
        cplen = 255.
      endif.
      objbin = s_string+i(cplen).
      i = i + cplen.
      balance = balance - cplen.
      append objbin.
    enddo.
...... after this use ur exesting code....describe table mailbin lines tab_lines and so
    describe table objbin lines tab_lines1.
    clear objpack-transf_bin.
    objpack-transf_bin = ' '.
    objpack-head_start = 1.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines1.
    objpack-obj_langu = 'E'.
    objpack-doc_type = 'XLS'.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    exporting
-tables
      packing_list               = objpack
      object_header              = objhead
      contents_bin               = objbin
      receivers                  = reclist
Regards,
Sri.
Edited by: sridhar arjunan on Jul 28, 2009 4:22 PM
Edited by: sridhar arjunan on Jul 28, 2009 4:23 PM

Can't open a class with enrollments more than 140 learners

Hi Gurus,
Could anyone please help me find the correct patch for this error?
Class can't open and comes up with error when enrollments reach more than 140 learners. I examined the code being called and it shows that a function called ota_utility.get_learners_email_addresses is concatenating email address of all the learners enrolled in that class but the variable holding this value is declared as VARCHAR2(4000) which is not enough.
The error message i'm getting is:
java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.OTA_UTILITY", line 3570
Any help would be greatly appreciated.
Thanks,
Joel

HI Joel,
We have the same case on our end and we applied patch 9724972 and it resolves the issue. This is the query that you can run to verify the issue.
SELECT * FROM (Select evttl.title ,
evt.event_id,
evt.course_start_date,
evt.course_end_date,
evt.event_type,
off.name Offering_Name,
HR_GENERAL.DECODE_LOOKUP('SCHEDULED_EVENT_STATUS' , evt.event_Status) Event_Status_Meaning ,
evt.event_status,
evt.parent_offering_id,
ota_utility.get_session_count(evt.event_id) Number_Session,
ota_general.get_org_name(evt.TRAINING_CENTER_ID) Training_Center,
ota_general.get_location_Code(evt.LOCATION_ID) Location_Code,
ota_utility.get_learners_email_addresses(evt.event_id) email_addresses,
ota_utility.get_class_available_seats(evt.event_id) event_available_seats,
ota_utility.is_class_enrollable('B',evt.event_id) is_class_bulk_enrollable,
ota_utility.is_class_enrollable('S',evt.event_id) is_class_single_enrollable
FROM ota_events evt,
ota_events_tl evttl,
ota_offerings_tl off
WHERE evt.event_id = evttl.event_id
AND evttl.language = userenv('LANG')
AND off.language = userenv('LANG')
AND evt.book_independent_flag = 'N'
AND evt.parent_offering_id = off.offering_id
AND evt.event_type IN ('SELFPACED','SCHEDULED')) QRSLT WHERE (Parent_Offering_Id = :1) ORDER BY TITLE ASC
Marie

Disc creator Audio CD with no more than 13 tracks

Similar Messages

Maybe you are looking for