Disc error when I install Panther

I have a powerbook G4 that is really acting up. It has come to the point I had to reinstall my original software. Now when I go too upgrade to Panther it tells me disc error at the end of the installation of the first disc. Also I can not get on the internet. I have installed the 10.2.8 uograde also. Thanks for any help
JOhn

Hi John!
Exactly which model PowerBook G4 is it?
What is the Processor speed?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
When manufactured, which version of OS, was pre-installed?
Did you use the original system install discs to reinstall?
Did you perform an Erase & Install?
Are you using the Full Retail Version, of the Panther Install CDs?
ali b

Similar Messages

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

TS3694 i have error when i install restore and update in file unknown occurred error 1015

i have error when i install restore and update in file unknown occurred error 1015

http://http://support.apple.com/kb/TS3694#error1015 this should help you with your problem.

Shared Technologies errors when re-installing Elements 10 from disc

What do I have to do to correct Shared Technologies errors when attempting to re-install Elements 10 from disc?

Hi LouEDG,
Please try renaming OOBE from this Location:
Windows:
C:\Program Files (x86)\Common Files\Adobe
Mac:
Library/Application Support/Adobe
Once done please try installing Elements 10 and it should work.
Regards,
Abhijit

File error when trying install Des9i by running 90201iDS_Win32.exe

Your instructions to install Des9i are:
1. Download the software (listed above) into a temporary directory. - DID THAT
2. Run file10 (batch4.bat) - DID THAT
3. Run 90201iDS_Win32.exe - I GET AN ERROR WHEN I TRY TO RUN THIS ONE. When I try to run it as a START/RUN with Batch4 running it tells me that the 90201iDS file is open by another application. I closed Batch4 and try running it again. Then it says it's not a valid win32 application. Then I tried to run it in Oracle by running step 4 (below) and selecting the 90201 file to install it. It tells me that the file is a directory or it is corrupt and to specify a valid filename. I re-downloaded it twice and tried all I know. Now what?
I did create a second ORACLE HOME for the Designer that points to the same folder where I have the 10 downloaded files.
4. Run setup.exe (located in the \disk1 directory). - NEVER GOT THIS FAR.

I solved my own problem... it was this: right after you run the batch4 you need to wait a while for all the file1...n.brk files to run. I was thinking it was done after file1.brk.
Sandy

Why swap size error when I install ides ecc6.0 in windows 2003 x86

Hi,
   I feel very confusion why the installation prompts me that "Swap size are not meeting condition" when I install IDES 6.0 in windows 2003 server x86.
   The ides type: ECC 6.0, MS SQL server 2005, Windows 2003 server x86.
   It's windows, not linux, where is the swap space?
   Could somebody give me a kindly help?
   Thank and thank
Jason

Hi,
In Windows, Paging File Space (Virtual Memory Space) concept is called as similar to Swap space thing in Linux/Unix OS. Both terms are used for virtual memory concept as per OS.
Minimum 20 GB of Paging File spaces is required for the SAP Installation on Windows. So ,allocate them from different drives or from single drive partition of your available Hard disk space.
Follow this path [to change your existing Virtual Memory or Page File size in Windows|http://technet.microsoft.com/en-us/library/cc737315%28WS.10%29.aspx].
Control Panel -> system -> Advanced Tab -> Performance section-Settings -> Advanced Tab -> Virtual Memory ->Change
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Feb 6, 2010 2:36 PM

Error when inserting install disc

Hi, When inserting a retail OS X Tiger disc into my G5 Tower to do an archive and install, when the computer boots of the CD, I get a Kernal Panic and cannot continue?
I have run permissions, and disk verify and all OK, also have completed 'memtest' and all ok there too.
Any thoughts?
Thanks

When you try to boot from the disc, are you depressing the C key at startup? Or depressing the Option key at startup to activate the Startup Manager screen & then selecting the install disc? Whichever method you are using, try the other method.
KPs are usually caused by a hardware problem - USB, Firewire or RAM. Disconnect all external devices. If you have the Apple Hardware Test app on the discs that came with your Mac, run the AHT.
 Cheers, Tom

Why am I getting Installation Failed error when running Install package?

Enterprise license holder here. Mac. I've installed ccplauncher, run it, and am now trying to run the Install.pkg. I'm getting an error:
Already tried running disc permissions, still nothing. Erased all old versions of CS (5, 5.5, 6) from my HD using AppCleaner so no resources or plists left behind before installing CC.

Jeff,
You may want to use /Utilities/Console and look at /Library/Logs/Adobe/Installers to see where the failure is actually occurring. Even though it's one install package, it's installing each application in sequence. If only one fails (and all the others succeed) you'll still see the message you received. There can be a lot in the logs, but you can use the Spotlight field to filter out the lines with "return code." Anything other than "0" (zero) indicates something that didn't complete. You can also look for words like "error" or "fail".
There are a bunch of things that can cause an error. I've sometimes had a problem with packages that include a lot of updates but rebuilding them seemed to fix it. Finding out exactly where the error is happening is a big help when you contact support.
I realize this isn't a solution, but hope it helps.
Ric

Office Jet Pro L7580 Runtime error when re-installing drivers

My Dell Latitude with Windows 7 (32 Bit) stopped talking to my Office Jet Pro L7580 a month or two ago, and I finally had time to try to troubleshoot it. I don't have any idea what may have changed to make it stop. After trying to reinstall it without success, I uninstalled the driver/app using the Windows uninstall and uninstalled the printer using the control panel. I then downloaded OJPRO7X00_FULL_14.exe and ran it. It extracts correctly, but then comes up with the message: Microsoft Visual C++ Runtime Library, Runtime Error: Program: C:\USERS\WA... This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I have several other drivers for other printers on the machine for use at my workplace, and they work fine, and this and earlier versions of this HP driver/app working fine for a couple of years. I've seen others on the forum that have had this error, but not in this situation.
I'm stuck at this point. Any help would be appreciated.

If you have not tried the above steps yet, then I have an alternative. Try reverting back to an old save point prior to the date you lost your scanning abilities.
I have seen a runtime error on Windows 8 where the OS was refreshed and that fixed the issue. In Windows 7, refresh is like reverting back to an old save point. You can also choose to upgrade your Windows 7 OS to Windows 7 OS (that is not an error in typing). This restores the important original settings prior to the possibility that perhaps a Windows update to C++ is what caused this.
You also have the option of using a recovery CD as well. The link(s) below may also be helpful.
--Backup and Restore--
--How to Use System Restore--
Let me know if these are also options. Since you have a lot of HP printers, yes my steps above would cause you to have to re-install the software to every last one of them. I want to make this as easy as possible for you but if the above suggestions do not work, it may have to be done. Keep me posted though. I hope this works!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

1335 error when re-installing Acrobat 9.5

My copy of the program came with my Canon Scanner a few years ago. It works fine for my limited purposes. When I upgraded my c:\ drive yesterday the program stopped working. I uninstalled and re-installed and now get a 1335 error saying the Data 1.cab is corrupt or unusable. Can anybody point me int he right direction?

Hey sscfilms,
Considering above error, I would suggest you to please visit the KB doc link mentioned below and try out the solutions:
Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
Let me know if this helps
Regards,
Anubha

MSIExec error when re-installing printer drivers

Hello,
Recently I had to uninstall and install again drivers for my printer since Windows went crazy and did not let the printer accept Word document to print. But when installing it shows MSIExec error (image below). I tried to uninstall all the printer goodies (apps and help center), tried to clean registers manually with regedit and tried to change data USB connector. No success.
Since I live in Czech Republic, use czech version of Windows and czech installer, the text shows in czech. The important is below.
What's that error kind of and what does the return code mean? How to fix it?
Using printer LaserJet 100 color MPF M175a on Windows 7 Ultimate 32bit edition...
Please, help quickly, I need to print some important document...
This question was solved.
View Solution.

Hey @Polda18,
Generally the error 'an install operation took too long to execute' is related to system files on your actual computer. There should be no reason you would need to increase the RAM on your computer. Cleaning up the registry is not a bad idea but I'm going to suggest a few more steps first under your normal User Account.
Step 1: Install Using HP Smart Install:
1. Press the Power button or switch to turn off the product, if it is not off already.
2. Disconnect the USB cable from both the product and the computer, if you already connected it.
3. Press the Power button or switch to turn on the product.
4. Reconnect the USB cable to the product and to the computer
The HP Smart Install program should start automatically. Follow the on-screen instructions to install the software.
Should this also fail, please proceed to the next step.
Step 2: Disable Smart Install:
On the front panel of your printer select the 'Setup' button (the wrench)
Under the Setup menu right arrow over to Service Menu and select OK
Under Service Menu right arrow to 'Smart Install' and select OK
Under Smart Install please turn OFF this feature and select OK
Once Smart Install is disabled, proceed to the next step.
Step 3: Run a Selective Startup on the Computer:
Click on your Start menu and in the 'search programs and files' box type msconfig and hit enter
A System Configuration Utility box will now open. Under the 'general' window select 'Selective Startup' and only uncheck 'Load Startup Items'
Click on the 'Services' tab at the top
At the very bottom select the checkbox for 'Hide all Microsoft Services'
Select 'Disable All' on the right
Select Apply and then OK and restart your computer when prompted
Step 4: Run an SFC /SCANNOW:
This is a scan that will run on your computer. Should it identify any system corruption it will tell you. Should the scan request that you insert your Operating System disk it does indicate that you have a corruption of your actual computer and your Operating System will need to be reinstalled.
Go to your Start menu and type CMD
CMD will populate as an option above, right click on this and 'run as admin'
When Command Prompt opens type sfc /scannow and hit enter
Allow the scan to complete and take note of any errors it may fine
Restart your computer once the scan is complete
Step 5: Run Windows Updates:
Please ensure that all your Windows Updates have been completed.
Open Windows Update by clicking the Start button , clicking All Programs, and then clicking Windows Update.
In the left pane, click Check for updates, and then wait while Windows looks for the latest updates for your computer.
If any updates are found, click Install updates. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Install Windows updates
Once these steps are complete try to install your software and drivers again. Please let me know if these steps resolved the issue. Should you end up getting any other error messages please let me know. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Error when downloading/installing Lion 10.7.3....

Hi,
I was about 50% of the way downloading the latest Lion update when I got the following error:

Finally managed to get everything working after getting the error below via Software Update:
Strangely enough, when I went to turn off my Mac last night, I was then prompted to either 'Install Update then Shutdown' or just 'Shutdown'. I chose the latter.
Here are the steps that I took before downloading/installing update:
1) Turn off iMac
2) Unplug TimeMachine HD
3) Restart iMac and launch Disk Utility
4) Verify / Repair Macintosh HD
5) Download Lion 10.7.3 Client Combo
6) Install Update and let iMac restart
7) Turn off iMac and plug-in TimeMachine HD
8) Turn on iMac and let TimeMachine do its thing (took about an hour)
Everything ran smoothly and system seems to be woking fine.

Disc Error when downloading purchased music videos

Hi there,
I'm using the latest iTunes and have purchased 3 music videos. When I try to download them, I gett an error saying:
"There was an error download your purchased music. The disc could not be read from or written to"
Strange thing is, the disc is fine (an external Maxtor network drive), I can download normal music files (I've done this successfully since getting this message) so I'm stumped.
I've sent a mail to iTunes support, but I thought I'd see if anyone else has had this problem and can recommend a fix.
Cheers,
Pete

Hello Peter,
Check out the suggestions in this Apple Support article below:
"Disk could not be read from or written to"
Also, if your videos were only partially downloaded and you'd like to retrieve them, then you can go to "Advanced> check for purchases..." in iTunes, and see if that works.
I hope this helps!

I get this error when I install the newest adobe creative cloud.

I removed the software one time. But now when I try to install it it gives this error.

Luukth for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Metafile error when I install flash player

I am very frustrated at this point. I was able to watch videos on my computer but not read pdf files. So I uninstalled my adobe programs and reinstalled. The reader worked fine but the flash player won't install. It says metafile error. I've tried the http://www.adobe.com/products/flashplayer/distribution3.html site and i downloaded and installed the exe installer. It still am not able to see videos. I'm not that great with computers. Am I doing something wrong?

That link does work but I cannot see the movie.
This is everything on the "about:plugins" page
Shockwave Flash
File: NPSWF32_11_5_502_110.dll
Version: 11.5.502.110
Shockwave Flash 11.5 r502
application/x-shockwave-flash
Adobe Flash movie
swf
application/futuresplash
FutureSplash movie
spl
Java(TM) Platform SE 7 U9
File: npjp2.dll
Version: 10.9.2.5
Next Generation Java Plug-in 10.9.2 for Mozilla browsers
application/x-java-applet
Java Applet
application/x-java-bean
JavaBeans
application/x-java-vm
application/x-java-applet;version=1.1.1
application/x-java-bean;version=1.1.1
application/x-java-applet;version=1.1
application/x-java-bean;version=1.1
application/x-java-applet;version=1.2
application/x-java-bean;version=1.2
application/x-java-applet;version=1.1.3
application/x-java-bean;version=1.1.3
application/x-java-applet;version=1.1.2
application/x-java-bean;version=1.1.2
application/x-java-applet;version=1.3
application/x-java-bean;version=1.3
application/x-java-applet;version=1.2.2
application/x-java-bean;version=1.2.2
application/x-java-applet;version=1.2.1
application/x-java-bean;version=1.2.1
application/x-java-applet;version=1.3.1
application/x-java-bean;version=1.3.1
application/x-java-applet;version=1.4
application/x-java-bean;version=1.4
application/x-java-applet;version=1.4.1
application/x-java-bean;version=1.4.1
application/x-java-applet;version=1.4.2
application/x-java-bean;version=1.4.2
application/x-java-applet;version=1.5
application/x-java-bean;version=1.5
application/x-java-applet;version=1.6
application/x-java-bean;version=1.6
application/x-java-applet;version=1.7
application/x-java-bean;version=1.7
application/x-java-applet;jpi-version=1.7.0_09
application/x-java-bean;jpi-version=1.7.0_09
application/x-java-vm-npruntime
application/x-java-applet;deploy=10.9.2
application/x-java-applet;javafx=2.2.3
Java Deployment Toolkit 7.0.90.5
File: npdeployJava1.dll
Version: 10.9.2.5
NPRuntime Script Plug-in Library for Java(TM) Deploy
application/java-deployment-toolkit
Google Update
File: npGoogleUpdate3.dll
Version: 1.3.21.123
Google Update
application/x-vnd.google.update3webcontrol.3
application/x-vnd.google.oneclickctrl.9
AVG SiteSafety plugin
File: npsitesafety.dll
Version: 11.1.0.4
npsitesafety
application/x-avg-sitesafety-plugin
npsitesafety
avgsitesafety
Google Earth Plugin
File: npgeplugin.dll
Version: 6.2.0.5788
GEPlugin
application/geplugin
GEPlugin
Silverlight Plug-In
File: npctrl.dll
Version: 4.1.10111.0
4.1.10111.0
application/x-silverlight
npctrl
scr
application/x-silverlight-2
Winamp Application Detector
File: npwachk.dll
Version: 5.6.2.3199
Winamp Application Detector
application/x-winampx-1.0.0.1
winamp
iTunes Application Detector
File: npitunes.dll
Version: 1.0.1.1
iTunes Detector Plug-in
application/itunes-plugin
This plug-in detects the presence of iTunes when opening iTunes Store URLs in a web page with Firefox.
My Web Search Plugin Stub
File: NPMYWEBS.DLL
Version: 1.0.1.0
My Web Search Plugin Stub for 32-bit Windows
application/x-mws-mywebsearchplugin
My Web Search Plugin Stub
mws
RealJukebox NS Plugin
File: nprjplug.dll
Version: 12.0.1.633
RealJukebox Netscape Plugin
none
RealJukebox NS Plugin File
none
RealPlayer(tm) HTML5VideoShim Plug-In (32-bit)
File: nprphtml5videoshim.dll
Version: 12.0.1.633
RealPlayer(tm) HTML5VideoShim Plug-In
application/x-rp-html5videoshim-plugin
RealPlayer
rh5
RealPlayer(tm) G2 LiveConnect-Enabled Plug-In (32-bit)
File: nppl3260.dll
Version: 12.0.1.633
RealPlayer(tm) LiveConnect-Enabled Plug-In
audio/x-pn-realaudio-plugin
RealPlayer
rpm
RealPlayer Version Plugin
File: nprpjplug.dll
Version: 12.0.1.633
12.0.1.633
application/vnd.rn-realplayer-javascript
RealPlayer Version Plugin
rpj
QuickTime Plug-in 7.6.9
File: npqtplugin7.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
image/jpeg2000
JPEG2000 image
jp2
image/jpeg2000-image
JPEG2000 image
jp2
image/x-jpeg2000-image
JPEG2000 image
jp2
QuickTime Plug-in 7.6.9
File: npqtplugin6.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
video/x-m4v
Video
m4v
image/x-macpaint
MacPaint image
pntg,pnt,mac
image/pict
PICT image
pict,pic,pct
image/x-pict
PICT image
pict,pic,pct
image/x-quicktime
QuickTime image
qtif,qti
image/x-sgi
SGI image
sgi,rgb
image/x-targa
TGA image
targa,tga
image/jp2
JPEG2000 image
jp2
QuickTime Plug-in 7.6.9
File: npqtplugin5.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
audio/3gpp
3GPP media
3gp,3gpp
video/3gpp2
3GPP2 media
3g2,3gp2
audio/3gpp2
3GPP2 media
3g2,3gp2
video/sd-video
SD video
sdv
application/x-mpeg
AMC media
amc
video/mp4
MPEG-4 media
mp4
audio/mp4
MPEG-4 media
mp4
audio/x-m4a
AAC audio
m4a
audio/x-m4p
AAC audio
m4p
audio/x-m4b
AAC audio book
m4b
QuickTime Plug-in 7.6.9
File: npqtplugin4.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
video/mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a
audio/x-mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a
video/3gpp
3GPP media
3gp,3gpp
QuickTime Plug-in 7.6.9
File: npqtplugin3.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
audio/x-gsm
GSM audio
gsm
audio/AMR
AMR audio
AMR
audio/aac
AAC audio
aac,adts
audio/x-aac
AAC audio
aac,adts
audio/x-caf
CAF audio
caf
audio/ac3
AC3 audio
ac3
audio/x-ac3
AC3 audio
ac3
video/x-mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
QuickTime Plug-in 7.6.9
File: npqtplugin2.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
audio/aiff
AIFF audio
aiff,aif,aifc,cdda
audio/x-aiff
AIFF audio
aiff,aif,aifc,cdda
audio/basic
uLaw/AU audio
au,snd,ulw
audio/mid
MIDI
mid,midi,smf,kar
audio/x-midi
MIDI
mid,midi,smf,kar
audio/midi
MIDI
mid,midi,smf,kar
audio/vnd.qcelp
QUALCOMM PureVoice audio
qcp
QuickTime Plug-in 7.6.9
File: npqtplugin.dll
Version: 7.6.9.0
The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
application/sdp
SDP stream descriptor
sdp
application/x-sdp
SDP stream descriptor
sdp
application/x-rtsp
RTSP stream descriptor
rtsp,rts
video/quicktime
QuickTime Movie
mov,qt,mqv
video/flc
AutoDesk Animator
flc,fli,cel
audio/x-wav
WAVE audio
wav,bwf
audio/wav
WAVE audio
wav,bwf
Adobe Acrobat
File: nppdf32.dll
Version: 10.0.0.396
Adobe PDF Plug-In For Firefox and Netscape 10.0.0
application/pdf
Acrobat Portable Document Format
pdf
application/vnd.adobe.pdfxml
Adobe PDF in XML Format
pdfxml
application/vnd.adobe.x-mars
Adobe PDF in XML Format
mars
application/vnd.fdf
Acrobat Forms Data Format
fdf
application/vnd.adobe.xfdf
XML Version of Acrobat Forms Data Format
xfdf
application/vnd.adobe.xdp+xml
Acrobat XML Data Package
xdp
application/vnd.adobe.xfd+xml
Adobe FormFlow99 Data File
xfd
Microsoft Office 2010
File: NPSPWRAP.DLL
Version: 14.0.4761.1000
The plug-in allows you to open and edit files using Microsoft Office applications
application/x-sharepoint
SharePoint Plug-in for Firefox
Microsoft Office 2010
File: NPAUTHZ.DLL
Version: 14.0.4730.1010
Office Authorization plug-in for NPAPI browsers
application/x-msoffice14
14.0.4730.1010
downloadUpdater2
File: npdnupdater2.dll
Version: 1.3.0.0
npdnupdater2
applicatiotn/x-vend.aol.dnupdater2.1
ocp
ocp
downloadUpdater
File: npdnu.dll
Version: 1.1.0.2
npdnu
applicatiotn/x-vend.aol.dnupd.1
ocp
ocp
This is everything on the "about:support" page
Application Basics
              Name
            Firefox
              Version
            16.0.2
              User Agent
            Mozilla/5.0 (Windows NT 6.1; WOW64; rv:16.0) Gecko/20100101 Firefox/16.0
              Profile Folder
              Enabled Plugins
              about:plugins
              Build Configuration
              about:buildconfig
              Crash Reports
              about:crashes
              Memory Use
              about:memory
        Extensions
              Name
              Version
              Enabled
              ID
        AVG Security [email protected][email protected] y Web [email protected] Cache1.0true{341d1af9-6917-4182-91d6-f00ac1447638}Yahoo! Toolbar2.5.1.20121011034613true{635abd67-4fe9-1b23-4f01-e679fa7484c1}AVG Safe Search10.0.0.1423false{1E73965B-8B48-48be-9C8D-68B920ABC1C4}RealPlayer Browser Record Plugin14.0.2false{ABDE892B-13A8-4d1b-88E6-365A6E755758}
        Important Modified Preferences
            Name
            Value
        browser.cache.disk.capacity1048576browser.cache.disk.smart_size.first_runfalsebrowser.cac he.disk.smart_size_cached_value1048576browser.places.smartBookmarksVersion4browser.search. param.yahoo-frmoz2-ytff-browser.search.param.yahoo-fr-cjktmoz2-ytff-browser.search.useDBFo rOrdertruebrowser.sessionstore.resume_from_crashfalsebrowser.startup.homepagehttp://www.google.com/igbrowser.startup.homepage_override.buildID20121024073032browser.sta rtup.homepage_override.mstone16.0.2browser.tabs.warnOnClosefalsedom.ipc.plugins.enabled.np mywebs.dllfalseextensions.lastAppVersion16.0.2keyword.URLhttp://search.mywebsearch.com/myw ebsearch/GGmain.jhtml?id=ZJxdm1286Sus&ptnrS=ZJxdm1286Sus&ptb=HkAEo_dPSBvB0YSx7QqbpQ&ind…ne twork.cookie.prefsMigratedtruenetwork.protocol-handler.warn-external.dnupdatefalseplaces.d atabase.lastMaintenance1352263698places.history.expiration.transient_current_max_pages1020 94places.last_vacuum1330283760privacy.sanitize.migrateFx3Prefstrueprivacy.sanitize.timeSpa n0security.warn_viewing_mixedfalse
        Graphics
        Adapter DescriptionIntel(R) HD GraphicsVendor ID0x8086Device ID0x0046Adapter RAMUnknownAdapter Driversigdumd64 igd10umd64 igdumdx32 igd10umd32Driver Version8.15.10.2202Driver Date8-25-2010Direct2D EnabledtrueDirectWrite Enabledtrue (6.1.7600.16961)ClearType ParametersClearType parameters not foundWebGL RendererGoogle Inc. -- ANGLE (Intel(R) HD Graphics) -- OpenGL ES 2.0 (ANGLE 1.0.0.1041)GPU Accelerated Windows1/1 Direct3D 10
        AzureBackenddirect2d
        JavaScript
              Incremental GC
            1
        Accessibility
              Activated
            0
              Prevent Accessibility
            0
        Library Versions
        Expected minimum versionVersion in useNSPR4.9.24.9.2NSS3.13.6.0 Basic ECC3.13.6.0 Basic ECCNSS Util3.13.6.03.13.6.0NSS SSL3.13.6.0 Basic ECC3.13.6.0 Basic ECCNSS S/MIME3.13.6.0 Basic ECC3.13.6.0 Basic ECC

Disc error when I install Panther

Similar Messages

Maybe you are looking for