Disc image alias don't work in dock

I recently 'upgraded' to mountain lion and since then my dock shortcuts no longer work;
I keep all of my personal files inside an encrypted sparse image then I have alias files for that drive and some of the folders within it stored on the local drive which I would then have in finder.
This used to work perfectly well and if the volume wasn't mounted it would prompt me to do so.
Now; it prompts me if the drive isn't mounted but then the links don't open their target folders, they work fine if I open the alias from within finder, shortcuts to physical drives and folders on physical drives still work fine when in the dock. 
nb; the folders within the sparse image can still be added to the dock as a stack but that doesn't solve the issue.
Anyone have any ideas?
Thanks.

Thank you so much for the tip.  It worked, in a sense.  But I have several individual files I'd like to have aliases for.  If I drag each one to the dock, my dock would be cluttered with these aliases.  Prior to mountain lion, I was able to have a folder of aliases on my dock, in list form or stack form.  I can still do that with any files not in a sparsebundle.  But the files in my sparsebundle won't work in that alias folder.  They only work as you suggested, individually dragging each one to the dock.
Is there any way to consolidate these aliases into one folder on the dock?
Again, thank you very much for your time and attention.

Similar Messages

  • E.mail aliasses don't work...

    I'm having a problem with my e.mail accounts / alliases (not with my default main account, but with the extra ones I've created)
    I know the address is active; I can for example send myself an e.mail TO this address. I just can't send FROM, as I am always asked:
    "Enter Password for Account "KrienQuad"
    The .Mac server “mail.mac.com” rejected the password for user “[email protected]
    Please re-enter your password, or cancel."
    Now I am sure the password is correct; but it doesnt seem to recognise it and refuses to send?
    I'm not sure if it might be to do with each accounts outgoing mail server (tried using the smtp.mac.com:[email protected], as well as my ISP and my main .mac server)
    I'm really stumped - can anyone shed some light? Thanks in advance!

    Hello,
    Is your Profile correct that you are running 10.3.9? If so, the ability to send directly with .mac alias addresses was only added to 10.4 and Mail 2.0.
    If you have other accounts, provided for example by your ISP, you can add the .mac alias addresses to those addresses listed in the email address preference entry box of the other accounts, and using commas to separate each address.
    More info, and questions, please.
    Ernie

  • Disc image file exported from Encore CS4 won't work

    Hello,
    I have a problem concerning the export of a disc image file in Encore CS4. I recently upgraded to CS4 and wanted to continue my project which I started editing with CS3. While working with CS3 I already did image files from this project for burning and testing the DVD. Back then it worked with no problems.
    However, since using the CS4 version Encore does the image without any problem, but I can't use the image file in any way afterwards. I mounted it with Daemon Tools as I did before, but the DVD won't play in any software DVD player I have installed (Media Player Classic, Windows Media Player, Nero Showtime) nor can I access the file structure over a file manager. Nevertheless NeroInfoTool and ImgBurn say there is a DVD in the virtual drive. Then I exported the DVD project into a folder and now I can see the files in the file manger but again no player will play it.
    Has anyone experienced this before and is able to help? It would be very appreciated since I don't want to downgrade back to CS3 :-)
    It's Encore CS4, Version 4.0.1.048 on a 2,8 GHz HT CPU, 2 GB RAM, Nvidia Geforce 6800 UT, lots of HDD space, XP + SP3.
    Thank you,
    Chris...

    Hey,
    thank you both. As I said no player accepts the project exported to a folder. It doesn't matter if I point the player to the video_ts.ifo or just the folder - it won't play. As a consequence I re-installed Encore CS3 in which exporting worked fine and guess what - the exported image and folder output doesn't work either. Since it worked before in CS3 it comes down to the conclusion that either I did some editing to the project that screwed the project or Encore CS4 did. Checking for mistakes in the project and previewing in inside CS4 everything seems fine. So might it be CS4 that ****** up the project file??? I mean it's full of strange bugs so it could easily be that. I even updated my Daemon Tools yesterday and it won't make a difference.
    Or could it be something else I haven't considered yet? Any ideas? I just don't want to build the whole project again which might not even work if it's some other error. This is a desperate call for help
    Thanks,
    Chris...

  • IMovie to iDvd - No audio- disc image did not work-reopen iDvd files empty

    I am making a 45 minute movie of a day at Disneyland. (My daughter wants it all so the editing is minimal)
    I have tried to burn 3 times. each time takes about 12 hours.
    first attempt had an error, i know not when, nothing burned to disc.
    second attempt burned to disc, the 6.0 theme looked great, MP3 music played, worked on TV set
    NO audio on the movie. trash the disc.
    Third attempt burn to disc image. end up with two folders AUDIO_TS and VIDEO_TS. the audio folder is empty. no image
    All the audio in the movie is off the video tracks except for ONE sound effect.
    Is that causing the problem? Is the update causing the problem?
    When I reopen any iDvdproj the themes are all blank even if the project file size is 5.8 GB. that does not seem right.
    I have another smaller project with the same problem, the iDvd files are blank when I reopen them.
    Right now I am trying to compress the movie into a QuickTime file but all the options were confusing since I am not an expert. in another 6 hours I will have results I have no idea how big the file will be, but the image willl remain the existing size ?? I am afraid it will be too small.
    How come it seems so easy to make a dvd to watch on you own TV yet so IMPOSSIBLE?
    G5   Mac OS X (10.4.7)   iLife 06 updated

    Hello Wade,
    the problem seems to be the audio. Give us a little more info on what audio you used in the iMovie project (original audio, music, MP3, Aiff...).
    Also: what audio setting does your camcorder have? Should be 16-bit, 12-bit is a big no-no with iDVD, see this thread:
    http://discussions.apple.com/thread.jspa?threadID=494268&tstart=0&start=45
    12 hours seem a long time to encode 45 min of video ... your mac should be able to do that in 4-5 hours max. I would suggest you convert all MP3 audio to AIFF before importing to iM.
    If your original audio is 12-bit you can try to export the whole audio (original & music) via QT using the audio only option with 24-bit Integer, then re-import into iM.
    Get the latest QT update, if you haven't done so already.
    Also do some basic iDVD troubleshooting:
    1. free some space on the startup drive (15-20GB recommended)
    2. Trash preferences (com.apple.iDVD.plist) and empty trash
    3. Repair Disk Permissions using Disk Utility
    4. Clear Cache Files (Tools: CacheOutX, Onyx)
    Have a look at what John Beatty says in this thread about iDVD trouble shooting:
    http://discussions.apple.com/thread.jspa?threadID=508221&tstart=0
    Third attempt burn to disc image. end up with two folders AUDIO_TS and VIDEO_TS. the audio folder is empty. no image
    the AUDIO_TS folder being empty is perfectly normal for Video DVDs, only music DVDs have audio in that folder
    hope this helps
    mish

  • Recovery discs don't work, Toshiba wants $25? - Qosmio G35-AV660

    I have a Qosmio G35-AV660. Basically, my recovery discs don't work. The first one does, but when it asks for the second one, I put it in, and it just spins and spins, and then pops out and it asks for the second disc again. I called Toshiba about this, and they went through the spiel about how it costs $25 and how it's not their fault, and that's the price for them to get it from this other company. I told them that I was willing to send my discs in, to verify that they aren't working right, and that I'm not trying to cheat them out of a free set of discs, but they wouldn't hear of it.
    I just want to be able to get QosmioPlayer working again, and the only way I can do that is with the recovery discs, and there's no way I'm paying $25 for something I already have, that should work, but doesn't, for no reason whatsoever.
    If anybody can help me out, either with a disc image (I only need the second disc), or a spare second disc, I'd be incredibly grateful.

    Also, I can prove that I own both discs, either with pictures, or MD5 keys, or whatever.

  • Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock"  !!!!

    Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock"  !!!!

    Ho comprato un adattatore originale Apple "lighitning to 30 pin adapter" per poter usare i mei vecchi cavi dell'iPhone4 con il nuovo iPhone5.
    Se collego l'adattatore (con il vecchio cavo delliPhone4) direttamente all'iPhone5 , tutto funziona.
    Ma se collego l'adattatore (con il vecchio cavo delliPhone4) all'iPhone5 tramite la "base dock" , l'adattatore non viene riconosciuto e non funziona.
    Pensando che l'adattatore fosse rotto, ho riprovato con altri identici adattatori originali, ma il risultatato è lo stesso.
    Quindi penso che potrebbe essere un errore di progettazione della base dock che supporta unicamente la connessione diretta tramite un cavo lighning e non supporta la connessione se in mezzo c'è l'adattatore !!

  • HT4528 I pulled my iPhone out of the docking station/speakers and now the ring tones don't work.  Anyone know a fix for this?

    Does anyone know if there is a fix for iPhone 4S when you pull it out of the docking station and now the ring tones don't work -- it only vibrates.

    Basic troubleshooting of the device is reset, restart, restore (first from backup then as new).  Has any of this been tried?
    Do other sounds work?
    Have you checked to see if the dock connector or headphone jack have debris in them?

  • Satellite A300-243 - Easy Keys & Recovery Disc don't work

    Hi, I just bought a new Toshiba Satellite A300 243 and I decided to reinstall system to Vista Ultimate 64 bit (because of the 4GB ram usage).
    It took me a few hours, but in the end I found all needed drivers and everything is working fine, except one thing - those multimedia keys (I think they're called Easy Keys). Start, Stop, Next track and Preview track works fine, but the first (by default used for toggling illumination) and the second (by default used for starting W Media Player) just don't work. I have installed the latest version of VAP for 64 bit Vista and in Toshiba Button Support I'm not able to change anything. The list, where normally I'm able to choose a key to edit its function, is empty. I found a few similar problems on this forum, but without any useful answer - lookes like the only way is to use the Toshiba Recovery option, and at this point I'm getting to my second problem.
    The second problem is in Toshiba Recovery Disc Creator and Toshiba HDD Recovery tool. At first, before I reinstalled Vista to 64 bit version I wanted to create Recovery Disc, but Toshiba Recovery Disc Creator just didn't started. Then I found the HDD Recovery option, and I read, that this tool is placed on a hidden partition, so I thought I will be able to recover the old system with this tool in case of any compication. So I reinstalled the system and wanted to go back to 32 bit, because it looked like its slower and at first I wasn't able to find all necessary drivers. And what a surprise - Recovery tool disappeared!
    Now the only thing I'm missing on 64 bit version is those two multimedia keys.
    And the last question - is there any chance to get a Recovery Disc with Vista 64 bit?

    Hello
    As you said for the easy keys or also called illumination buttons you need the Toshiba Value Added Package. The Satellite A300-243 belongs to the PSAG8E series and therefore you can find all drivers and tools on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Before you install the VAP, make sure that all drivers are installed and SP1 for Vista at least. Then you can install it and normally then you can use the FN keys, illumination buttons, etc.
    Make also sure that you have installed the newest BIOS for your notebook.
    About your problem with the recovery disk creator and HDD recovery option I can only say that these features are only available on the preinstalled Vista version. That means if you upgrade to Vista 64bit you cant use the HDD recovery option anymore and also the recovery disk creator.
    So if the recovery disk creator doesnt work you should use the HDD recovery option but this is not stored on a hidden partition. These files are stored on the second partition of HDD in the folder HDDrecovery. The hidden partition that you mean belongs is a Vista feature: http://en.wikipedia.org/wiki/Windows_Recovery_Environment
    But just one question: Did you already create a recovery disk?
    Greets

  • I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

    I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

    Consider running your Adobe and AppleWorks software in Snow Leopard (with Rosetta) installed in Parallels in Lion or Mt. Lion:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • Klipsch Image ONE headphones don't work with OS6?...

    Does anyone know why my Klipsch Image ONE headphones now don't work with OS6? More specifically, the "Mute" and "Next Track Advance" function of the center button used to work with the prior OS, but since 'upgrading' to OS6 I lost the functionality...

    it's likely a hardware issue most people experience that the detector which indicate if there is a headset plugged in are activated all the time making their phone silent but your issue is likely the opposite
    the cure if it exist would likely be the same as the stuck in headset mode
    iPhone stuck in "headphones" mode
    worst case would be repair

  • Why States don't work on Tablet view for text frames over background image?

    I have Macbook Pro with Top config on top S/W everything updated.
    Using Muse.
    Tablet view site.
    Simple text frames buttons with states over a full width background image - DON'T WORK!
    The text frame buttons are in TOP layer.
    Visible but do not respond to to any touch. UNLESS I delete the background image.
    Can't figure it out for days.
    Please help.
    Thanks
    Eli @

    TO MUSE STAFF!!!!
    I Found a major bug that needs to be fixed:
    In Tablet view:
    A linked text frame or state button has to be in the top layer to respond to states.
    If a composition menu is opening up and covering the button when triggered - THE BUTTON WILL NOT RESPOND EVEN IF THE COMPOSITION IS CLOSED!!!
    Only if the button is ARRANGED ABOVE the composition in the layer and becomes the absolute TOP OBJECT in the layer - ONLY THEN it will respond.
    PLEASE LET ME KNOW IF YOU GOT IT.
    I have tested it on a few projects and the bug is consistent.
    [email protected]
    Thanks for fixing it in the near future
    Eli

  • Email Link... and Email Image menu items don't work.

    Suddenly, about a week ago, the Email Link... and Email Image menu items stopped working. Problem seems to be on only one login on one of my three machines. The rest seem to be OK.
    Using FF 19.0 and TB 17.0.3 under Windows 7.
    Any ideas?

    Thank you. Although I had already checked the MailTo: application and found it set to "Use Thunderbird (default)", clearing that association and setting it to "Always Ask" jarred things loose. When I set it back to T-Bird, it worked again.
    Again, thanks for the nudge.

  • DMGs and disc images...

    Hi all
    Officially made the switch from PC this week and am now the proud owner of a hot new iMac.
    I'm loving it so far and finding the transition very smooth, however I can't get my head around DMG files and disc images.
    For example, I've downloaded Firefox and Thunderbird. They now sit on my dock and work well, however I have the DMGs and a disc image file sitting on my desktop and I don't know what to do with them.
    At first I assumed that a DMG was just like the zip and rar files I was so used to on the PC. I would just unpack them, install them to the destination of my choice, then delete the archive file. DMGs don't seem to be quite the same thing though.
    Also, what are the disc image files? I would like my desktop to be as unclutered as possible, however if I try and move these into my home folder, they only come over as shortcuts.
    If anyone could guide me through the process I would greatly appreciate it.
    Cheers,
    Heath.

    Hi
    There are 2 ways of installing:
    1 With apps like Firefox & Thunderbird, you download the DMG
    Double-clicking it should open a window with a Firefox icon followed by an arrow &, I think, a folder icon. To install firefox you open a finder window, navigate to Applications then drag & drop the Firefox icon to the Applications window. This installs the application. You can then drag the white disk icon on the desktop to the trash (to eject it).
    If you have dragged it straight to the dock then you are running the program from the disk image (you have not actually installed it).
    2 Application will also come in form of .pkg file, double-click to run.
    Steve

  • Disc image and mounting question .

    Disc utility - file - new > blank disc image . Save as ( so so ) . Volume name (so so ) . Volume size (4.5 gb dvd-r/dvd-ram. ) . Volume format ( mac os extended journal ) . Encryption ( none ) . Partition (cd dvd ) Image format ( spars bundle disc image )
    I do this and I get two icons on desk top . One looks like the hard drive symbol and will say so so .sparsebundle . Then under it is an icon that looks like an external cd player or the like . And will say the image name under it .
    When I open the image icon and put my files into it I close it and burn it to dvd . After it is finished I try to open it and it says it cant be mounted . So I tried the hard drive looking one just above it and nothing . So I could eject the icons but not the dvd . She says I should try closing application and try again . Cant find anything to close so I restart and can eject the dvd then . I put it back in and same thing so I restart and get it back out . Now I start all over a new and just before I burn I leave the folder open and click edit select all the file the burn selected items to disc and vwula every thing
    s ok .
    Now after you have read all this , my question is (1) What is the top icon for ?
    (2) Is this normal ?
    (3) Can I keep asking questions like this to learn my mac . I do search the forums and they are quite helpful Thank you for your time .

    Plymouth Horizon,
    I will do my best, First Why are you making a sparse image and then burning? To Me this seems like extra work. What you can do is make a Burn Folder, add the things you want burned and then burn it. It will add Icons for the stuff in it with an alias Icon but it will burn the file not just an alias. I personally only use the images when I want to secure something with a password, or store files I've downloaded.
    I would say that its normal, in the case that your making the image on your desktop. The reason you have the two 'Icons' is one is the image and the other is the mount of the image. Think you downloaded a .dmg file you have the file in your downloads folder and the icon on your desktop, you trash them both to get rid of.
    And you are more then welcome to keep asking questions here, that is what these forums are for.
    Hope that helps,
    Weston

  • How do I burn a disc image (img file) to dvd?

    I created a disc image from iDVD, but my disc drive on my home computer is broken. With a flash drive, I copied the img file onto my work computer & burned the file to disc. However, while the file copied, the disc doesn't play as normal dvd. What am I doing wrong? Thanks.

    Though the replies above were very helpful and most likely would have worked, my work computer doesn't allow access to Disc Utilities. However, I bugged my IT guy and he showed me another way, using the Burn Application. I just needed to use the correct setting, as was mentioned above, I was burning data & not DVD. I'm sorry I don't have it in front of me, but I think I had to click the DVD tab & then select DVD/Video from the drop-down menu. One quirky element: I wasn't able to drag/drop the img file into Burn. I needed to drop the contents of the img file (the VIDEO_TS folder). Then it worked fine.
    Message was edited by: Unca Bip
    Message was edited by: Unca Bip

Maybe you are looking for