Disc too small

I'm building a DVD in encore as i've done several times with all the transcoding setting at automatic. The dvd is about 2 hours long. after the transcoding an error pops up saying disc capacity to small. It looks like encore built a 6.5 gig file and it will not fit on my 4.7 gig DVD. In the past with the automatic transcode setting encore just fits whatever length your project is to the disc. I'm not sure what's changed. in the transcode settings under quality setting for some reason it defaults to blu-ray mpeg. when i change it to DVD mpeg and press okay and open the setting up again it's still set to blu-ray mpeg. any suggestions

Make sure you did not include a computer directory in the ROM content

Similar Messages

Backup disc too small?

I recently purchased a new MacBook Pro and used a Time Machine backup to transfer all the files from my old MacBook Pro to the new one. Now, I am trying to set up Time Machine on the new laptop with the same external hard drive I was using a Time Machine backup disc with my old computer. The backup fails and tells me the backup disc is too small.
Now, the backup disc has 58.43 GB available out of 499.97. The data on my internal harddrive is 141 GB, with about 607 GB free.
So, yes, 141 is more than 58. But why doesn't it just overwrite the old data? It is supposed to delete the oldest backup and replace it with the newest one, right?
Do I need to reformat the backup disc? Do I need a backup disc that's larger than my internal HD even if I'm not using all that space?

sarahbuck wrote:
I recently purchased a new MacBook Pro and used a Time Machine backup to transfer all the files from my old MacBook Pro to the new one.
If you used Setup Assistant or Migration Assistant to do that, when the first backup started, you should have gotten the prompt in #B5 of Time Machine - Troubleshooting. If you selected "Reuse Backup," Time Machine shouldn't be doing a full backup.
If you used some other method, you won't get that message, and TM wants to do a full backup. But since it won't ever delete your last remaining backup, there isn't enough room.
Your best bet is to erase the TM drive and start over.
Do I need to reformat the backup disc? Do I need a backup disc that's larger than my internal HD even if I'm not using all that space?
The drive needs to be much larger than the amount of data it's backing-up. Usually 2-3 times is best, but it varies greatly depending on how you use your Mac.

Too Small CD Stuck in Disc Drive!

I have a small CD disk in the slot for the optical disc drive. Probably too small, and it is non-conventional shape, straight-sided. Computer does not recognize that the disc is there, and none of the usual techniques to eject work. Is this now a mechanical repair job?
I have a MacBook Pro, 2.2 GHz Intel Core 2 Duo, running 10.5.5.
Armando

I strongly recommend that you take the computer to an Apple repair shop. Depending on how far you've managed to get the disc inserted (and stuck) you may not have done any damage to the drive. However, given the nature of the slot loading drive, an amateur's attempts to dislodge it by mucking about with various instruments could result in a hefty repair fee.

Volume too Small for Versions?

Anyone else see this message yet:
The document “mydocument.numbers” is on a volume that is too small to support permanent version storage.
The volume in question is a 100MB disk image with 93MB free space remaining. My Numbers file is 200KB. Seems to me there is plenty of space. I could store nearly 500 full versions in that amount of space.

I had the same problem re disc image size and previous versions.After lots of experimentation, I found that if you create the disk image( sparse or otherwise,encrypted or otherwise) with a size of 600MB or bigger then this problem seems to go away.

Disc too slow or system overload - please help!

I'm doing a very minimal project with 2 voices, and 5 fx tracks - no plug-ins and after I've recorded a few takes I keep getting Disc too slow or system overload (-10010) messages either in record or playback. These messages have gotten more common for me lately, but this project is so small I'm really surprised. I've repaired permissions, rebuilt directory with Discwarrior and have 100 gigs free space on my media drive. Logic 7.2.1.
Usually I work at 44.1 but this project is 48 (fx tracks taken off CD are 44.1) I don't think it's much of a factor because I'm getting the same message on my regular projects. The audio portion of my CPU meter barely registers, but the disk I/O goes from barely visible to spikes into the red.
Any help would be greatly appreciated.

That's cool, Logic has been doing this since at least version 4, and
it still does it.
PC, Mac, g3, g4, g5, pentuim, 2, 3, 4. inboard/outboard audio disks, SCSI, firewire, 1gigRAM, 2gigRAM, 8gigRAM.
"Disk too slow or system overload" <-- funny, I just produced a 30-minute television presentation doing all the video editing on this mac, all the while MAYA was running.
Yet, Logic gives you the overload message even if there's ONE SINGLE AUDIO FILE in the arrangement!
It has nothing to do with your buffer settings.
Even the best outboard audio disks stop spinning after a few minutes.
Unlike Nuendo and ProTools, Logic doesn't care what your disk is doing when you press play.
Nuendo and ProTools spin up the disks before attempting to play the file, avoiding the RIDICULOUS error message. Logic just throws its transport into play mode, causing the error message, and causing you to believe your system is inadequate.
After I write this, I'm going back into Logic to press play. I know as a Fact, I will recieve the ''system overload message''. Been this way since version 4,
SOLUTION#1: Press 'OK' at the error window, wait a few seconds, then try playing the song again.
SOLUTION#2: Wait...another ten years?
SOLUTION#3: Invest in ProTools.
The 'system overload' excuse is ABSOLUTELY one of those "10 years and still going" screwups in the logic software.
I still use Logic, and the folks at Logic apparently will always think you're lying when you report an error. buffer settings! <- too funny.

Disc too slow...for two track recording?!

So weird issue popped up at band rehearsal last night...
Hooked up two mics to my Apogee Duet, created a stereo Aux (with compression) routed to a stereo track just record rehearsal for album preproduction
Everytime we'de get 2 minutes into a song Logic would lock up and say "Disk too slow" or "Disc too slow ro system overload"
I have run HUGE sessions in my little project studio with no issue...why can't this handle basic recording tasks? GAH!

fermusic wrote:
IS your Disc the internal System drive with at least 60GB free space? (this is required for Leopard)
Not true. Insane claim. Leopard cannot run from a startup disk smaller than 60 GB? Why do you keep repeating this nonsense, when it has been explained to you by several people, not too long ago? You keep juggling these figures, too.
Here you say it is 100 GB:http://discussions.apple.com/click.jspa?searchID=-1&messageID=7978443
Here you talk of 40%:http://discussions.apple.com/click.jspa?searchID=-1&messageID=8218690
Here it is 1/4:http://discussions.apple.com/click.jspa?searchID=-1&messageID=6840828
Here too (25 %):http://discussions.apple.com/click.jspa?searchID=-1&messageID=8018139
Here's the search I did:
http://discussions.apple.com/search.jspa?threadID=&q=%22free+space%22&objID=&dat eRange=thisyear&userID=fermusic&numResults=30&rankBy=10001
Get your facts together Ferla, or at least do not present them as facts. Because they are not.
This is not a Leopard requirement, it is another 'Ferfetched' fact, or a 'Ferversion' of the truth.
I can Run over than 64 Audio Track project on my old MacBook Black Core DUO 32bit on a USB2 2.5" HD!
Yes, and my daddy is stronger than your daddy too....

Photoshop resolution on Macbook Pro 15" Retina display too small

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)
If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display
Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?
There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.

quaetapo wrote:
Well that certainly helps in terms of making the image larger – only problem is with the low resolution there's a loss of clarity and pixelisation of the image; so not the same level of quality...
In System Preferences/Display, what resolution do you have your screen set to? Try changing that also to see if the two settings can work together. Also, since the vast majority of users (Mac or PC) don't have Retina Displays, isn't what you're seeing with Low Resolution checked in Photoshop closer to what most people will see? Remember that Apple's software, such as Safari, have been upgraded to take full advantage of the rMBP display; most other browsers, especially in Windows, haven't.
And if you want to tinker with the rMBP's resolution even further, check out "Eye-Friendly" in the App Store.

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

Error "roll area too small"! Can't find a way to resolve!Please hep.

Hello everyone:
       i am getting the error "roll area too small" when I am looping through an internal table and calling the code below on change of some value.
===
CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        authority              = space
        immediately            = space
        new_list_id            = c_x
        no_dialog              = c_x
       user                   = sy-uname
      IMPORTING
        out_parameters         = params
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc NE 0.
      CLEAR : params.
    ENDIF.
The printer destination has to be set up
    params-pdest = v_dest.
    params-prtxt = v_spool_text.
    params-paart = lc_paart.
    params-prtxt = v_spool_text.
    params-primm = 'X'.
    params-prrel = space.
    NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
    NEW-PAGE PRINT OFF.
======
I posted this before and got some feedback and tried everything but it is not fixing the problem! I rewarded points to all the answers. I had basis increase roll area size, optimized code and did everything I can but I am still getting the same error "roll area too small". Same program works in 4.6C but in ECC6.0 I get this error! I have other programs that generates more than 10,000 pages in the spool but the program I am working on creates only 7700 pages! I am not sure what else is changed in ECC6.0! Could someone please give me any ideas? rewards assured.
thanks.
Mithun

Hello Mithun,
Even i think increasing the roll area should have helped
Are both the systems WIndows based or is one unix based ?
see this
http://listserv.sap.com/pipermail/linux.general/2001-July/thread.html#670
and search for "roll area too small" in the list of links
it may help
Also,
in this solution, it says to use 'field groups'
http://www.sapfans.com/sapfans/forum/r2all/messages/42.html
Try these links as well - others with the same problem
http://marc.info/?l=mysap-linux-general&w=4&r=1&s=%22rollareatoo+small%22&q=b
Message was edited by:
        Kris Donald

Photoshop CC icons and text are too small: how to adjust so they're readable? [was: Joanne]

I have just downloaded Creative Cloud on a new computer. The new photoshop icons and text are too small for me to see or work with. I cannot seem to adjust this so its "useable"

Hey Bob,
Ive put feature requests for this in before and I know many others have as well. Is there any way to see if Adobe is actually working on this? I dont really consider this a feature request, it should be standard with the software. A feature request would be something like creative cloud libraries, not the ability to make font sizes and icons bigger.

UI text too small

Is there a way to make the text in the UI larger?The default size is too small and strains the eyes.

tidysteve wrote:
but doesn't that make it system wide ??? not just for aperture ???
it was intended as a tool to use by those that are legally blind to zoom any part of the os, we use it every day as a teaching/demoing tool.
you can also zoom into a photo or video without creating artifacts/pixelation which the normal zoom tool does on many apps
i suppose you could just change it back and forth ...
apple option 8 -- toggles it on and off, or you can use one "Butler" hot key for it http://www.manytricks.com/butler/
http://www.petermaurer.de/butler/
victor

Thumbnails in "OPEN" dialog box too small to see!

The thumbnails are too small in the open dialog box so that I can't see the file I want to open. Yes, you can make them bigger in finder itself...but I am always opening pictures and I just can't see them!
Almost as frustrating as the column issue. The name column is very very wide when I try to open a file.. so I can't sort by the other columns without dragging over the bar at the bottom of the screen. THis is so so frustrating. I resize but it doesn't stick to the next session.
Apple invented the finder. Why is it so inferior to windows explorer?

The only solution to enlarging the icons in an application open dialog window is to use the Accessibility panel in System Preferences. Under Zoom, enable Use keyboard shortcuts to zoom.
The first time you have an application open dialog, you press the keys: option + command + = as many times as you want to zoom in. This will enlarge the open dialog window and its contents. When done, press option + command + 8 to restore normal window size. Subsequently, you can alternatively press option + command + 8 to zoom to the previous setting, or return to normal zoom.
This is as good as it is going to get. The applications (not just Apple’s) only use a subset of Finder’s settings in the open dialogs, and these do not include icon enlargement settings, which as you realize, are part of the actual Finder’s settings. The application development frameworks, and not Finder, are remiss in not providing icon size adjustments in open dialog windows.
You can provide feedback to Apple regarding OS X.

Open/save dialog boxes stuck at (too small) default size

I've been having a relatively small issue with Mountain Lion that has become a big hassle. In past versions of OS X, whenever I'd resize an open/save dialog box in an application, it would be that size the next time I went to open/save. In Mountain Lion, however, those dialog boxes always default to the smallest possible size (which is too small to read a filename longer than a few characters). so I have to resize the dialog box — every time! I open and save a lot of files, so this gets pretty tedious. This doesn't seem to happen in apple programs, but it definitely does in the Office Suite and the Adobe Creative Suite, especially in CS4 Photoshop and Illustrator. Might be I can fix it by myself but I can't imagine where I may dig it.

You might try looking here for the Adobe products:
Adobe Help and Support
Try Microsoft support for the Office Products:
http://www.microsoft.com/mac

Error: ORA-06502: PL/SQL: numeric or value error: host bind array too small

Hello,
I am getting this error when i am trying to execute a PL/SQL script using an Oracle API
We are using Oracle 10g release 2 database. I am getting this error only on some instances. This script is running fine in Development instances.
Script:
SET VERIFY OFF;
SET serveroutput on size 100000;
SET linesize 300;
EXEC FND_STATS.GATHER_COLUMN_STATS ('AR', 'HZ_LOCATIONS', 'COUNTRY');
SELECT
hl.location_id,hl.state, hl.country,
hcasa.org_id
FROM hz_cust_site_uses_all hcsua,
hz_cust_acct_sites_all hcasa,
hz_party_sites hps, apps.hz_locations hl,
hz_parties hp,
hz_cust_accounts hca
WHERE hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
AND hcasa.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND hp.party_id = hps.party_id
AND hca.cust_account_id = hcasa.cust_account_id
AND hca.party_id = hp.party_id
AND hl.country NOT IN ('US','CA')
AND hps.party_site_number NOT LIKE 'M%';
--PROMPT Dropping Table pmr13286_temptable
DROP TABLE pmr13286_temptable;
CREATE TABLE pmr13286_temptable AS (SELECT
hp.attribute_category , hl.address_lines_phonetic,
hps.party_site_number,hca.cust_account_id,
hcsua.site_use_code, hcsua.primary_flag, hcsua.status,
hl.address1, hl.address2, hl.address3, hl.address4,
hl.city, hl.state, hl.postal_code, hl.country,
hl.county, hl.province, hcasa.org_id,
hl.creation_date
FROM hz_cust_site_uses_all hcsua,
hz_cust_acct_sites_all hcasa,
hz_party_sites hps, apps.hz_locations hl,
hz_parties hp,
hz_cust_accounts hca
WHERE hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
AND hcasa.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND hp.party_id = hps.party_id
AND hca.cust_account_id = hcasa.cust_account_id
AND hca.party_id = hp.party_id
AND hl.country NOT IN ('US','CA')
AND hps.party_site_number NOT LIKE 'M%');
DECLARE
l_location_rec hz_location_v2pub.location_rec_type;
l_object_version_number hz_locations.object_version_number%TYPE;
p_status_code NUMBER;
l_api_status VARCHAR2 (2000);
l_msg_count NUMBER (15);
l_msg_data VARCHAR2 (2000);
v_total_count NUMBER (15);
v_prvi_count NUMBER (15);
v_countr_count NUMBER (15);
v_null_count NUMBER (15);
v_rem_recs          NUMBER (15);
v_status_code VARCHAR2 (2000);
l_sql_errmsg VARCHAR2 (500);
CURSOR c_cust_addr
IS
SELECT
hl.*
FROM hz_cust_site_uses_all hcsua,
hz_cust_acct_sites_all hcasa,
hz_party_sites hps, apps.hz_locations hl,
hz_parties hp,
hz_cust_accounts hca
WHERE hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
AND hcasa.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND hp.party_id = hps.party_id
AND hca.cust_account_id = hcasa.cust_account_id
AND hca.party_id = hp.party_id
AND hl.country NOT IN ('US','CA')
AND hps.party_site_number NOT LIKE 'M%';
BEGIN
v_total_count := 0;
v_prvi_count := 0;
v_countr_count := 0;
v_null_count := 0;
dbms_output.put_line('Total Count'||v_total_count );
dbms_output.put_line('PR/VI Conversion Count'||v_prvi_count );
dbms_output.put_line('PR/VI to US Conversion Count'||v_countr_count );
dbms_output.put_line('Non US/CA State Null Count'||v_null_count );
FOR i IN c_cust_addr
LOOP
l_location_rec := NULL;
v_total_count := v_total_count + 1;
l_location_rec.location_id := i.location_id;
l_location_rec.state := i.state;
l_location_rec.country := i.country;
dbms_output.put_line('Location_id '||l_location_rec.location_id||' '||'State '||l_location_rec.state||' '||'Country '||l_location_rec.country);
BEGIN
SELECT hl.object_version_number
INTO l_object_version_number
FROM hz_locations hl
WHERE hl.location_id = l_location_rec.location_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
raise_application_error (
-20059,
'object_version_number not found for location = '
|| TO_CHAR (l_location_rec.location_id)
END;
Update 1 - Update Addresses of 3 records that have wrong country names
BEGIN
IF (l_location_rec.location_id IN (1436720,119456,604649)) THEN
dbms_output.put_line(' 3 records Location_id '||l_location_rec.location_id);
IF ( l_location_rec.location_id = 1436720) THEN
l_location_rec.state := 'OH';
l_location_rec.country := 'US';
ELSIF ( l_location_rec.location_id = 119456) THEN
l_location_rec.country := 'US';
ELSIF ( l_location_rec.location_id = 604649) THEN
     l_location_rec.country := 'PK';
END IF;
hz_location_v2pub.update_location (
fnd_api.g_true,
l_location_rec,
l_object_version_number,
l_api_status,
l_msg_count,
l_msg_data
     IF l_api_status <> fnd_api.g_ret_sts_success
THEN
dbms_output.put_line(' Error In API with status of '||l_api_status);
IF l_msg_count > 1
THEN
FOR s IN 1 .. l_msg_count
LOOP
l_sql_errmsg :=
SUBSTR (
RTRIM (l_sql_errmsg)
|| ' , '
|| RTRIM (
fnd_msg_pub.get (p_encoded => fnd_api.g_false)
1,
500
END LOOP;
ELSE
l_sql_errmsg := SUBSTR (l_msg_data, 1, 500);
END IF;
dbms_output.put_line(' Error Message '||l_sql_errmsg);
ROLLBACK;
RETURN;
END IF;
END IF;
END;
Update 2 - Update state to 'VI','PR' where country is in 'VI','PR'
BEGIN
IF (i.country = 'PR' AND (i.state <> 'PR' OR i.state IS NULL))
OR (i.country = 'VI' AND (i.state <> 'VI'OR i.state IS NULL)) THEN
v_prvi_count := v_prvi_count + 1;
dbms_output.put_line(' State to PR/VI Location_id '||l_location_rec.location_id);
SELECT DECODE (i.country,'PR','PR','VI', 'VI') INTO l_location_rec.state
FROM apps.hz_locations WHERE
location_id = l_location_rec.location_id;
hz_location_v2pub.update_location (
fnd_api.g_true,
l_location_rec,
l_object_version_number,
l_api_status,
l_msg_count,
l_msg_data
          IF l_api_status <> fnd_api.g_ret_sts_success
          THEN
          dbms_output.put_line(' Error In API with status of '||l_api_status);
          IF l_msg_count > 1
          THEN
          FOR s IN 1 .. l_msg_count
          LOOP
          l_sql_errmsg :=
          SUBSTR (
          RTRIM (l_sql_errmsg)
          || ' , '
          || RTRIM (
          fnd_msg_pub.get (p_encoded => fnd_api.g_false)
          1,
          500
          END LOOP;
          ELSE
          l_sql_errmsg := SUBSTR (l_msg_data, 1, 500);
          END IF;
          dbms_output.put_line(' Error Message '||l_sql_errmsg);
          ROLLBACK;
          RETURN;
END IF;
               dbms_output.put_line('Location_id '||l_location_rec.location_id||' '||'State '||l_location_rec.state||' '||'Country '||l_location_rec.country);
END IF;
END;
Update 3 - Update Country code to 'US' where state code is either 'PR' or 'VI'
BEGIN
IF l_location_rec.state = 'PR' OR l_location_rec.state = 'VI'
THEN l_location_rec.country := 'US';
v_countr_count := v_countr_count + 1;
dbms_output.put_line('PR/VI country to US Location_id '||l_location_rec.location_id);
hz_location_v2pub.update_location (
fnd_api.g_true,
l_location_rec,
l_object_version_number,
l_api_status,
l_msg_count,
l_msg_data
IF l_api_status <> fnd_api.g_ret_sts_success
          THEN
          dbms_output.put_line(' Error In API with status of '||l_api_status);
          IF l_msg_count > 1
          THEN
          FOR s IN 1 .. l_msg_count
          LOOP
          l_sql_errmsg :=
          SUBSTR (
          RTRIM (l_sql_errmsg)
          || ' , '
          || RTRIM (
          fnd_msg_pub.get (p_encoded => fnd_api.g_false)
          1,
          500
          END LOOP;
          ELSE
          l_sql_errmsg := SUBSTR (l_msg_data, 1, 500);
          END IF;
          dbms_output.put_line(' Error Message '||l_sql_errmsg);
          ROLLBACK;
          RETURN;
END IF;
dbms_output.put_line('Location_id '||l_location_rec.location_id||' '||'State '||l_location_rec.state||' '||'Country '||l_location_rec.country);
END IF;
END;
Update 4 - Update state code to NULL where state code is NOT NULL and country code is not in US or CA
IF l_location_rec.country NOT IN ('US','CA') AND l_location_rec.state IS NOT null
THEN l_location_rec.state := FND_API.G_NULL_CHAR;
v_null_count := v_null_count + 1;
dbms_output.put_line('Non US/CA to Null Location_id '||l_location_rec.location_id);
hz_location_v2pub.update_location (
fnd_api.g_true,
l_location_rec,
l_object_version_number,
l_api_status,
l_msg_count,
l_msg_data
IF l_api_status <> fnd_api.g_ret_sts_success
          THEN
          dbms_output.put_line(' Error In API with status of '||l_api_status);
          IF l_msg_count > 1
          THEN
          FOR s IN 1 .. l_msg_count
          LOOP
          l_sql_errmsg :=
          SUBSTR (
          RTRIM (l_sql_errmsg)
          || ' , '
          || RTRIM (
          fnd_msg_pub.get (p_encoded => fnd_api.g_false)
          1,
          500
          END LOOP;
          ELSE
          l_sql_errmsg := SUBSTR (l_msg_data, 1, 500);
          END IF;
          dbms_output.put_line(' Error Message '||l_sql_errmsg);
          ROLLBACK;
          RETURN;
END IF;
dbms_output.put_line('Location_id '||l_location_rec.location_id||' '||'State '||l_location_rec.state||' '||'Country '||l_location_rec.country);
END IF;
END LOOP;
v_countr_count := v_countr_count +2;
dbms_output.put_line('Total Count'||v_total_count );
dbms_output.put_line('PR/VI Conversion Count'||v_prvi_count );
dbms_output.put_line('PR/VI to US Conversion Count'||v_countr_count );
dbms_output.put_line('Non US/CA State Null Count'||v_null_count );
     BEGIN
     SELECT
     count(*) into v_rem_recs
     FROM hz_cust_site_uses_all hcsua,
     hz_cust_acct_sites_all hcasa,
     hz_party_sites hps, apps.hz_locations hl,
     hz_parties hp,
     hz_cust_accounts hca
     WHERE hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
     AND hcasa.party_site_id = hps.party_site_id
     AND hps.location_id = hl.location_id
     AND hp.party_id = hps.party_id
     AND hca.cust_account_id = hcasa.cust_account_id
     AND hca.party_id = hp.party_id
     AND hl.country NOT IN ('US','CA')
     AND hps.party_site_number NOT LIKE 'M%';
dbms_output.put_line('remaining count '||v_rem_recs );
     END;
COMMIT;
     EXCEPTION
     WHEN OTHERS THEN
     dbms_output.put_line('Error in Program: ' ||' Error Message ' || SQLERRM);
     ROLLBACK;
END;
SELECT
hl.location_id,hl.state, hl.country,
hcasa.org_id
FROM hz_cust_site_uses_all hcsua,
hz_cust_acct_sites_all hcasa,
hz_party_sites hps, apps.hz_locations hl,
hz_parties hp,
hz_cust_accounts hca
WHERE hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
AND hcasa.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND hp.party_id = hps.party_id
AND hca.cust_account_id = hcasa.cust_account_id
AND hca.party_id = hp.party_id
AND hl.country NOT IN ('US','CA')
AND hps.party_site_number NOT LIKE 'M%';

You may want to zero in on the part of the code that throws this error.
(i)
Try executing a small part of your code, while commenting out the rest. If that is successful, execute a slightly bigger part of the code, and so on successively. Once you know, where exactly the code is failing, it should be easier to create a small testcase against your data and investigate the problem.
(ii)
Check those local variables and the values that get assigned to them. It is a good practice to anchor local variables to database columns. That way, there will be less surprises when the table structures are altered.
(iii)
The script as such does not show any glaring error, but you may want to check those procedure calls e.g. -
      hz_Location_v2Pub.Update_Location(fnd_aPi.g_True,l_Location_rec,l_Object_Version_Number,
                                        l_aPi_Status,l_msg_Count,l_msg_Data);It's quite possible that the procedure is assigning a value to an output parameter that is too small to store that.
Note that, given such a huge script and not knowing your database, we are not particularly inclined to debug it. The only person who can make things easier for himself/herself is you.
HTH,
isotope

Photoshop CC: Have a template that I moved image into. Image is too small. How do I resize the image while in the template? Or must I go to original image file and resize there again and again until I get the right fit?

I have a template that I am able to plug different pictures into at different times. The problem is that when I plug an image into that template, I find that the image is either too big or too small. Is there a way to plug the image into the template and resize the image (and not the template itself) OR will I have to go to the file with the original image and resize it there and then try to plug it in to the template to see if it fits------and if it does not fit, go back to the original file with the image and resize it again and see if that fits---and so on and so on...........? I have tried the" image size" option but it's hit or miss------mostly miss!
Thanks!

Read up on Smart Objects. It looks like you have no idea as to how to create and use them.
Jut create a Smart Object from the layer containing whatever it image it is that you are "plugging into your template". But you do need to learn the application at its most basic levels.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve. You cannot learn Photoshop in a forum, one question at a time.
Or is it possible that you don't even have Photoshop proper but the stripped-down Photoshop Elements?"
If the latter is the case, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you would want if you're working in Elements.:
https://forums.adobe.com/community/photoshop_elements/content
If you do have Photoshop proper, please provide the exact version number of that application and of your OS.
(edited for clarification)

Disc too small

Similar Messages

Maybe you are looking for