Disc utility can't see the hard drive

Hard drive dies in my mac book. I know it was actually dead 'cuz it wasn't spinning. Took it to the apple store he stuck in a new one for me. I said I could format it myself no sweat. Took it home, booted of up with the install disc. Open up disc utility- no hard drive. I know that this one hasn't eaten it yet, 'cuz I can hear it spinning. Any ideas?

Yeah, that's what I figgered. Already made the appt, but I can't make it back 'till Wednesday. Just hoping for one of those miracle "hold down Z37 when you boot" kinda answers in the mean time. Or else a, "you're totally doing it wrong, you shouldn't even be using Disc Utility!" dress downs before Wednesday rolls around.
Just so you know, the genius was only too happy to get me outta the terribly crowded store without "finishing the job."

Similar Messages

Disc Utility doesn't see new hard drive

Hi Everyone.
I've just replaced my old 20gig IBM Travelstar 4200rpm with a new Seagate Momentus 7200.1 80gig hard drive. I used Carbon Copy to back a duplicate of the info on the Travelsdtar to an extrenal fireiwre drive. I can boot up from the fireiwre drive. When I go to format the new Seagate drive, disc utility doesn't see it. I even booted from a tiger install disc and tried it's disc utiltiy. Still couldn't see it. Before I go and reinsert the old Travelstar, maybe someone can tell me what I am doing wrong? thanks Andrew
PS. The Seagate had jumpers on it. The Travelstar didn't, so I took off the jumpers on the Seagate before I installed it..
Ti G4 Powerbook DVI Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz
Ti G4 Powerbook DVI and Intel Imac Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz

Hi Eww. You are exactly right. What was I thinking (not). I reopened the laptop and had a good poke around. The Seagate comes with a jumper diagram on the case. I was correct to assume that no jumpers means " master". Why I didn't see that last night only wine will know.
It's not safe to surmise, because one drive has no
jumpers in place or jumpers in a particular
arrangement, that any other drive with which you
replace it should be jumpered the same way. Jumper
configurations may vary considerably from one drive
model and manufacturer to another.
If you find that the drive is already correctly
jumpered (with no jumpers in place), then the problem
may be a poor connection .
Yes that was it. In my haste to get the thing going I only connected one row of the pins. Problem solved. It's purring along as I type. For the record it is much quieter than the Travelstar. Thanks for everybody's replies.
Ti G4 Powerbook DVI Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz
Ti G4 Powerbook DVI and Intel Imac Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz

Disk utility can't find the hard drive

I'm getting the flashing question mark when I try to start up my computer. I tried to use disk utility (starting the machine from the system software CD) to diagnose the problem but it wouldn't even find the hard drive. Any suggestions? Any help greatly appreciated!

Nothing at all, Tony. When I came back to work on my computer after a 30-minute break, one of the applications was frozen. Soon after, everything froze. After restarting, the flashing question mark came up. I was able to boot from CD but when I tried to run disk utility it wouldn't find the hard drive. At this point I'm at a loss and I'm worried about my data, which, as it happens, I hadn't stored elsewhere! Any suggestions?

MacBook Pro can no longer see the hard drive

I've got a MacBook Pro Core 2 Duo, 15-inch.
Okay, so I was chasing the nazis out of North Africa in Call of Duty 2 when the game froze. Command-Option-Escape was unresponsive, so I held down the power button to shut the whole thing down. When I brought it back up, I got the flashing folder icon.
After yelling a few words I shan't repeat here, I booted off the installation DVD, then started up Disk Utility to try to repair the disk. However, Disk Utility only sees the DVD; it doesn't see the hard drive at all. Neither does Startup Disk or System Profiler. (The hard drive would be under the ATA section in System Profiler's menu, right? It only shows the DVD drive.) If I try to go ahead with the OS X installation, at the "Select a Destination" screen, where the list of disks should be is disturbingly blank. So according to every method I've tried so far, it's as if my hard drive has been entirely disconnected.
This was my Christmas present, and I was hoping to get at least two years out of it, not two weeks. Anyone have any idea how to get this beautiful machine back on its feet again? I'm familiar with Unix and not afraid of using the command line, but I'm not sure what to try there.
15" MacBook Pro C2D Mac OS X (10.4.8)

Okay, second question: How does this forum software work? According to the thread list, someone named MacWizard has replied to this thread, but I can't see it.
MacWizard, if you could email your reply to spearbrave at gmail point c0m so I can read it there, I'd appreciate it.
15" MacBook Pro C2D Mac OS X (10.4.8)

Do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

Ok, well go and grab a small 2.5" hard drive enclosure so you can put the new drive in & temporarily use it like an external hard drive.
Download Carbon Copy Cloner or Super Duper and make a bootable clone of your current HDD on the new HDD.
Once that's done you can test the clone by booting from it. To do this hold Optioni while booting to select the external (new) drive. If everything looks ok, you can go ahead and swap over the HDD's.
So much easier.

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

Can't see external hard drive after error code -36

Hi, was copying iphoto data from an WD My Passport 750GB external hard drive to my MACBook when the system said it could not complete the copy as it had encountered a problem and indicated error code -36. Now I can't see the external drive (or any data) on any computer. I have tried 3 different MACs to no avail. The drive makes a soft beeping noise but then stops but the light stays on.
Any ideas on how I can get access to my data??

Make sure the cable is securely seated on the device side.
If that's not the problem, then either the drive mechanism or the enclosure has failed. If you don't have backups, you'd better hope it's the latter. Remove the mechanism from the enclosure and install it another enclosure. You can buy fairly inexpensive USB docks that a SATA drive drops into with no need for disassembly.
Failing that, your only chance is to send the drive to a recovery service such as Drive Savers. They disassemble the drive mechanism in a clean room and mount the platters in another drive. Cost will be in the 4-5 figure range, and the results are uncertain.
If you don't have backups, you don't have data.

Can I upgrade the Hard Drive on a macbook?

I am having all kinds of problems with my 2nd (in less than a year) WD external 1TB hard drive on my Macbook. I use it for my iTunes and iPhoto, as well as my Time Machine backup. So when my Macbook just stops seeing the hard drive that is a problem. The first WD 1TB My Passport HD did the same thing until I had to run the Mac HD repair program to see the hard drive. The problem persisted. I've ordered my third HD but this time it's a Seagate GoFlex USB 2.0. My Macbook has only a Firewire 400 and USB 2.0 ports. My iPhoto and iTunes files are too big to fit on my 160GB internal HD. Is there a Apple recommended internal HD upgrade to solve this problem? I have Mac OS X 10.7.3

You sure can, up to 1 terabyte. Check ifixit.com for comprehensive guides on how to do it. If you don't feel comfortable, have an authorized apple dealer do it.

IBook G4 not seeing the Hard Drive

My iBook G4 does not see the hard drive. When the computer turns on I get the flashing smiley face in the folder. When I put the disk for the computer in then the computer starts up but cannot see the hard drive so I cannot get into anything. I even put the computer in safe mode to see if I could get it to work and I couldn't. I had a friend who works on computers look at it and he said I needed a new hard drive. So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing. I'm not sure if there's a problem with the logic board or really what is wrong with it. Please help

Cantobellus:
So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing.
This seems to suggest that your HDD may not be the problem. Try the old HDD you removed by putting it in a firewire enclosure and connect it to the computer and see if you can boot the computer from it. I experienced a similar issue with a iBook G4 which is detailed in the thread Could it be the logic board?. Your issue may be different, but the thread may give you some ideas for troubleshooting.
Cheers
cornelius

How can I add the hard drive icon to the menu bar on a MBPr

How can I add the hard drive icon to the menu bar on a MBPr? I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
Thanks

It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
Select Preferences from the Finder's Finder menu and check the desired boxes:
Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

How can i add the hard drive to my desktop

how can i add the hard drive to my desktop

bobbyruff,
open the Preferences in Finder and click on the General tab. Look for a checkbox entitled “Show these items on the desktop: Hard disks”. Check it and close Preferences.

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

Flashing file folder - can't find the hard drive-imacG3 - 9.1

When I attempted to start up I got a flashing "?" in a folder. I loaded the hardware test CD and everthing tested fine but no hard drive was listed. I loaded the software install CD and got the message"disk is unreadable. Do you want to inintialize". Options were Standard 9.5 GB or extended. Is there anything I can do other than initialize and lose everything? If I do initialize should it be standard or extended? If the hardware test can't find the hard drive how did the software install disk recognize it. Any ideas? Thanks
imac G3 Mac OS 9.1.x ibook G4 OS10.3.9

jalacqua...
Unfortunately both of those must run from a bootable CD or bootable device that isn't the startup volume. And, by the way, both of those applications do cost money.
TechTool Pro comes from Micromat and you would need version 3.0.9 (final for Mac OS9) from them.
DiskWarrior is a bit tricky as the CD is bootable only in Mac OS 10 and can cripple an iMac Slot Loading machine that hasn't had the Firmware update. They include an older Mac OS 9 version on that CD however you would have to install it into something that is bootable.
...Ron

Mac mini hard drive crashed. The ecovery drive only offers to reinstall mavericks on the recovery drive. Doesn't see the hard drive. What can I do?

Hi, I have a mid-2011 with Mavericks installed. It crashed. I can boot into recovery mode. And it shows me the name of the hard drive and the recovery partition. When I boot back to the hard drive, it gives the grey screen and a long progress bar. WHen the progress bar eventually fills up, the computer just shuts down. In recovery mode, Disk Utility says the hard disk cannot be repaired.
But when I try to re-install Mavericks from the Recovery Partition, it only shows the recovery partition as the destination, not the rest of the computer.
Not sure what to do.
Thanks if anyone has any advice.
J

Thank you very much for the reply.
Indeed, Disk Utility can't even erase and reformat the drive. It's toast.
This is very disappointing. Second Mac Mini I've had go out this year. First seems to be a logic board issue. Now the hard drive on the newer machine.
At least I was able to use Disk Drill to get photos and other important files off the Mini. I had a Time Capsule, but last year, it too died (just a few months out of warranty).
One further question, if you don't mind. If I'm just going to replace the HD on the mini, I'm not sure why one would do this step that you suggested: "get a new HD, put it in an enclosure or use another method that allows the HD to be connect to the Min. Then boot to the recovery partition and install Mavericks on the new HD."
Also, maybe I can replace the drive on the mini myself. Maybe get an SSD for it? They seem more reliable.
Thanks again for taking the time to answer me.

The other day I set up my Airport Extreme to share a 3TB hard drive and it show up fine in the Airport Utility App. That day was great I could access it on both my Mac's. Now though I can't fine the hard drive in that same App and have tried to fix it.

I've already tried disconnecting and reconnecting the hard drive to the Airport Extreme, No luck.
I've tried adding it all over again. No luck.
Why did it even loose the settings in the first place?

It sounds like you just have 2 formatted drives (SSD, HDD) that are not configured as a Fusion drive. If so, you have to manually move files from the SSD to the HDD and visa versa.
If your system would have come configured with a Fusion drive (SSD and HDD 'fused' together) then OS X would maintain file movement from the SSD to the HDD without user intervention.
Look here then scroll down to Introducing Fusion Drive for a brief explanation.

Disc utility can't see the hard drive

Similar Messages

Maybe you are looking for