Disc utility problems
Hello, ive done a bit of research on the internet on this and cant seem to find an answer so was hoping some of you guys could help me. Im trying to make it possible to boot from my ipod. I drag the file i want to boot from into the "source" bar and the ipod to "destination" under the restore tab in disc utility. I click the button what erases the ipod and then hit restore. After a few seconds I get the message "an error (2) occurred while copying (no such file or directory)" If i try this process while the source is mounted I receive a message saying the file is busy and then disc utility quits. Any help and advice would be very welcome.
Thanks
Running Tiger on an iPod is more a party trick than something useful.
Here's some links that may help
http://www.macosxhints.com/article.php?story=20050524104814419
http://www.macosxhints.com/article.php?story=20050401064920219
Similar Messages
-
Disc Utility problem re update to 10.4.6
Have been trying to update to 10.4.6 and am having the following problem when i try to Verify Permissions
As soon as I start Disc Utility I get a message: ' Disc Utility started, but a background process needed in disc utility didnt start properly'
Any Tips on this one. ThanksInteresting problem...
have you tried booting your computer up from the 10.4 tiger installer disc and running Disk Permissions from Disk Utility off the DVD?
See if you can do that...and see if that "fixes" the issue. Also run the Repair disc option while you're at it.
If not...
also try this.....
Restart your mac.
hold down CMD-S when you restart.
Your mac should restart into a black screen with prompt.
you should see instructions at to what to type: (something to this nature):
/sbin/fsck -fy
Let it run, til it's done...may take anywhere from a couple minutes to 5-10minutes... depending how big and full your hard drive is.
If it encounters an error, run that command again.
Keep running the command (retyping) until you get a message that says DRIVE is OK (something to that nature).
then type: reboot to restart your computer into OS X.
then try to run Disk permissions again. See if that works.
good luck!
Dual 867mhz G4 MDD Mac OS X (10.4.6) -
While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.
While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.
-
o.k. So, I've been tinkering with several "self help" fixes for several days now with no positive results. I'll explain my initial problems and then end with my most current situation. In hopes that someone out there will have a good suggestion or possibly remedy for the issues i'm facing
First, my problem started after my wife played a game on my macbook pro and the computer froze. She went into a panic and decided to shut down via power button. When computer restarted she got the blinking file/grey screen and that problem continued for a couple of days before I began using steps from various support topics from apple concerning the grey screen/blinking file folder.
Ultimately, yesterday I decided to erase my Macintosh HD file as one tip suggested. Following the brief online and on screen (via the process) tips that were there. Once that was completed I attempted to reinstall snow leopard (my most current version on hand) into the pc.
At first, I thought this would work. It looked promising. But, after several hours the installation screen returned with failure. I attempted to repeat. And, even repair drives during this try and re-try process.
Now, today, one of the drives.. "hitachi..." states that it's failing and is in red letters with no ability to repair via the disc utility screen. The Macintosh HD drive shows that it's o.k. But, this drive is listed under the HItachi drive so I think that's where a problem might lay.
So, I guess my question really revolves around.. What if anything can I do to get the hitachi drive back up? (short of taking it to a repair facility and replacing.)
And, how on earth can i get my OSX back up to I have a laptop again.
Operating on a macbook pro here. It's my lifeline. Otherwise, I am using a Windows desktop that i'm not that fond of. lol
I'm trying to bring this 2006 laptop back to life. Trying to avoid a rather expensive repair or the purchase of a new laptop. Also expensive...
Any help would be appreciated.Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point. -
Boot camp partition/disc utility repairs problem
First post, so heres my what i'm running - Mac Book 2.16, OSX 10.5.2, 2 GB RAM and 111 GB Hard Drive
I've been messing around with Boot Camp the last couple of days and I finally got windows xp SP2 to running, however I ended up deleting the partition so I could make it bigger. When I tried to make the partition again boot camp told me to repair my drive with disc utility. I ended up doing it from the installation disc and did the repair from there no problems. When I get back to boot camp it tells me to run disc utility to repair? Any help would be great!Backup to another drive. 'nuke your current partitions and use the Partition tab in Disk Utility to set as 1 Untitled (rather than "current") and you'll be fine.
BCA needs to find one large free unfragmented contiguous chunk. Also, drives reformatted with Leopard (fresh) do better than systems upgraded in some manner from Tiger to Leopard. Partition maps seem better.
Lots and lots and lots of threads that are 100% identical to yours floating around - daily occurrence. Everyone that 'cuts it short' and wants larger, cutting corners, not planning for growth.
Plan for SP3 which will be out eventually, sooner more than later.
If you don't need to run native Windows, then Fusion/Parallels is a lot less troublesome. -
My external HD won't show up anymore on my desktop nor does it get listed in disc utilities. I tried to cennect it to another mac but it doesn't show there either nor in that mac's disc utility. I happened to re-start the computer while the hd was connected and now it doesn't show up anymore. I use it for back-up via Time machine. I could re-format and do the back up all over again but then I need to find it first. Please, does anyone have any solution to this problem?
It sounds as though the external drive may have failed. There's nothing at all wrong with restarting your computer with the external drive connected -- that's a perfectly reasonable and normal thing to do, done by countless users every day without any ill effects.
-
Archive and Install/Disc Utility issues -
I'm currently spending a summer abroad in South America, and have had issues with my Macbook Pro (early 2011 version) no longer starting up after some virus experiences last week. The computer hangs itself during loading on the white screen w/ grey apple and the spinning dial. In contacts with Apple Care as well as some Mac-saavy friends, the following situations have been tried:
Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself.
Opening in single user mode - I run the recommended sbin/fsck -fy command to clean up the hard drive. It comes back after having checked 6-7 parts, saying that the MacHD is in good shape, with a message following saying that something had been "modified" (forgive me for not remembering the correct verbage at present). I then run the same command again, resulting in a message that the HD is clean and without error. I then "reboot" and remain hung on the white screen w/ grey apple.
Opening in verbose mode - I reach the following lines of text, and then there is no further progress:
enable
IONetworkController::enable
createMediumTables
enable end
MacAuthEvent en0 Auth result for: 00:23:cd:1e:f2:c4 No Ack
same line as above saying "Auth timed out" at the end
Command+option+r+p - shock two or three times, (three startup chimes) and computer continues to hang itself in the normal spot.
- So, at this point I took the advice of Apple Care and a few other friends, and tracked down a "retail copy" of Mac OSX (10.6.3) in order to try to do an Archive and Install or any sort of Disc Utility via the startup disc.
Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen.
Holding "option" during the startup gives me the option of loading from the HD, or the disc. Selecting the disc proceeds to whirr the cd drive, take me to the white loading screen with the grey apple, and... you guessed it... leaves the CPU hung.
My question is then, is my Macbook Pro unable to read this disc and execute Archive and Install/Disc Utility for hardware reasons as per the virus attack, or is the disc not compatible with my version of OSX (which I have since confirmed through my wife to be 10.6.6)?
Different sources have told me different things. The local AASP in Uruguay sold me what they professed to be the "latest" version of OSX - the 10.6.3, what's more for $55 dollars instead of the lower cost as available in the states (between $15-$30), so I am reluctant to go back to them for advice when they seem more inclined to cash in on my inexperience (Mac owner of less than a month) than actually fixing my issue. Apple Care told me that a standard "retail disc" should work, but I am assuming now that they believe I can snag the same version as initially came with my Macbook Pro. Should I be looking to have my wife mail my original OSX install DVDs down here to resolve this problem? Should 10.6.3-retail be working and is not for reasons I haven't identified? I have since done some online research and found mentions that doing any sort of HD partitioning or OSX reinstalls can only be accomplished by utilizing a disc of an equal or more recent version of the OSX (examples that 10.4 can't work on a notebook preinstalled with 10.5, etc). Does this translate to 10.6.3 not being able to function for my 10.6.6 MBP?
Any insight or thoughts would be much appreciated, as essentially all of my schoolwork and assignments are now trapped on an inaccessible HD. Thank you for your time.
- JosephI tried adding in a bunch of information about what your troubleshooting steps meant, but the server went into maintenance while I did. So, here it is again:
"Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself."
This is FSCK running, and gives you an indication of it's progress.
"MacAuthEvent en0 Auth result for: 00:23:cd:1e:f2:c4 No Ack"
This is either a failed DHCP request or ARP request.
"Command+option+r+p"
Command+Option+P+R - Resets PRAM. That's why p+r.
"Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen."
This problem indicates that the disc is too old to boot your system. The reason for why this disc cannot boot is because it doesn't contain the necessary drivers for your model MacBook Pro. My mom and brother have similar models, and my brother had similar issues while in Japan. He went and got an install disc as well, which failed, I ended up stepping him through so that it would boot in Safe Mode, and then got it working in Normal Mode remotely.
FYI: Sophos has a free Mac Antivirus program, that is very processing friendly, and will scan in the background. You may wish to consider it as an alternative to Avast! if it continues giving you problems. Though I suspect it may be coincidence that your computer had problems shortly after Avast! cleaned up files. Let me know how it goes. You may wish to open up Disk Utility and check your S.M.A.R.T. Status. You want to make sure it says "Verified" If it doesn't say "Verified" then you have a problem.
-Phill -
My laptop keeps crashing. This seems to happen only when it's streaming from sites such as Netflix, YouTube or Spotify.
Also, it stopped being able to run iTunes, and can't download Yosemite.
I want to wipe it and reinstall everything - I've already done a full back up.
The problem is disc utility will no longer open, saying it 'quit unexpectedly':
I'm running Mac OS X10.6.8 and I've lost install CD.
I have no idea what to do, but need to get this sorted as quickly as possible as I need my laptop for work.Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.
-
OS 10.4.7 Disc utillity on old PowerBook HD
My OS 10.4.7 Disc utillity cant delete or format my "old" PB HD
Hi, hope someone can help me.
I got an older PowerBook G4 1Ghz with OS 10.4.7.
When I start on the OS DVD or an extern HD I can´t format or delete my internal HD with this new Disc utillity???
Symbols are marked red...
When I start in OS 10.2.8 and use this versions Disc utillity, I can delete and format my internal HD???
Why is that?
And since I have experienced some troble withe crash on the internal disc and since it is getting to smalle, I will replace it with a new bigger one.
Will I experience the above issue when I do so???
Kind regards Weimar.Hi Weimar
If the HD is healthy you should not be experiencing
any of these problems. Everything should work fine.
Have you tried repairing the Disk or running Hardware
tests on it? What's it's SMART status?
Matthew Whiting
Hi Matthew,
Ok,
the smart funktion failed.
And I have tryed repair using Disc Utillity and Tech Tool Platinum...
Sometime it seems that the HD is ok, and then when I installe system og other software it do funny stuff...
So I think I will go for a new HD
Thanks for your reply... -
Boots to flashing question mark folder and disc utility cannot locate internal hard drive
Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!
It was the internal HD cable. I replaced it and now my MacBook Pro works
-
started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility. what to do?
Activity Monitor – Monitor Performance Problems
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information -
I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
Since installing Mountain Lion, Time Machine says says that my Free Agent Goflex (Seagate) external 2gb drive cannot be used as it is read only. I tried disc utility to repair permissions but that block is greyed out. The disc verifies as being OKI What next?
Ok, I solved this problem! I ejected the drive and then disconnected it both from the power supply and the USB connector. I then reconnected everything and powered it up again and Then went into TM preferences and chose the drive as the backup. TM did a new backup (well over an hour) and now works as advertised.
-
Old External drive appears on SYS. Info., not Disc Utility.
-I have a external enclosure containing my used hdd from my old windows machine connected to my macbook pro retina.
-I am trying to clear it to use with just my mac and cannot see it in my Disc utility, yet can see it in my System info under the usb location.
-There is data on the drive that I wanted to save, but now im desperate enough to just want the drive to backup on.
-I was able to see the drive on my replacement windows machine in disc management but was unable to access it because anything i would do would respond "disc is not ready" or something along those lines.
-I've ruled out connection problems due to the fact that I can see the drive appear in System Information when plugged in, and it is gone when unplugged.
-I have tried a cold boot and get the results above, and trying to hot boot makes my computer not able to boot up at all, even when I dictate to boot with my internal boot drive.
Thank you for any advise!you can only repair and verify permissions on a drive with OS X installed. so that part is completely normal.
see this link to unlock the drives:
http://discussions.apple.com/thread.jspa?messageID=8173371� -
I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
I can get into safe mode. But no regular startup.
I tried disabling bluetooth, thinking that might be related. It didn't help.
I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
But I still get hung on the blue screen when trying a normal startup.
All help would be appreciated.Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem.
Maybe you are looking for
-
Does anyone know how to solve this problem: I a trying to download a paid app but I cannot because the AppStore says that info not have enough space to download it even though I have more than enough space so if any of you know what can solve this pr
-
Macbook Pro with a Samsung 244T
I just connected the monitor to my macbook and it finds it instantly and sets the display to the samsungs native resulution automatically (Great!) My question is: Can I use the samsung monitor as the main monitor for the macbook? If I use mirror mode
-
Making a video out of pictures
I want to explain my own program, I've got several screenshots of it. All screenshots are in the .PNG format. I've imported all the screenshots into a new Composition. How can I set the duration for each screenshot? And how can I animate a courser wh
-
Storage Space 2012 R2 CPU / Memory requirement
How much impact would does CPU core density has with Storage Space 2012 R2? Given the option of dual socket 5500 series quad core vs dual socket 5600 series hex core for a SMB environment (attach up to maximum of 2 x 24 JBOD), would there be any sig
-
Current version of B2B/Application Integration?
Where and what is the current version of Appllication Integration for B2b. I see the version under applicaiton server 10.1.2. Is this the current version? Edited by: ss396s on Apr 28, 2009 10:59 AM