Disc utility says it has repaired "X" but when immediately rerun says the same
I run "repair pemissions" - it says it has repaired seven items.
Without doing anything else, I immediately repeat the repair - with the same result.
I reboot and run "verify permissions" - same seven items are "unrepaired".
Can anyone tell me what exactly "repair permissions does"?
I'm running OS X 10.7.3 on a 2.16 GHz core 2 iMac
Although immensely popular, repairing permissions is a waste of time unless you have a specific indication of a permission error involving system files, which is rare, or a boot failure. It always spews bogus warning messages that mean absolutely nothing. The built-in help for Disk Utility says:
Repairing disk permissions
If you see an alert or a message that says your permissions are set incorrectly, you can correct the disk’s permissions by clicking Repair Disk Permissions.
It’s not completely irrational to repair permissions after running a third-party installer, since such installers have been known to set incorrect permissions.
Similar Messages
-
Itunes says it has available updates but when I click download updates, it says no available update.
This happened to me as well. I use an iMac as my main machine, but have a laptop that my daughter uses. I use my Apple ID on both computers. I would occasionally see on my iMac that I have updates available and would click update and get the No Update Available response, yet the red badge remains displaying that I have an update. Found that a few people had this happening as well via these forums so I checked on the laptop and it updated. I then noticed the red badge on the iMac had disappeared as well. If you have any other computers that share your Apple ID, I'd run update on those to see if it fixes your issue.
Thanks,
Bryan -
I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
When i go on my phone it says i have 3 new messages but when i click on it i really dont. I turned off and turned my phone on 3 times and it still says i have 3 new messages how do i stop that. Without actually turning on the bager icon thing that pops up on the app.
Hey there Samimanis_.
It sounds like your notification for messages is showing that you have a few mesages but when you go into the app, there are no new messages. I would start by signing out of your Apple ID in Settings > Messages. Then close the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone, sign back in, and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling -
This problem has developed all of a sudden. I unplugged the computer from the charger and within minutes I got the message "Running on Reserve Power." When I plugged it in the battery percentage read 80%. After few minutes the green light on the charger was lit. The next day whne I got the same message I plugged it in and it showed 44%. Is this a battery issue? Or something else?
How old is your battery?
How many charge cycles does it have?
And, FYI, your question concerns your laptop, but you asked your question in the iMac forum. -
my iphone 4s fell and display went blank,and when i restarted it shows a USB on display asking to connect with itunes,instead i went to a phone repair shop where they service iphones too.First they said that they have to install the IOS4 again in it but they could not do so due to an error so later they asked me whether they should install IOS5 i agreed but it only happened after a long struggle yet the phone remains in the same state with the display showing USB asking to connect with itunes..they could not fix it..please help me..:(
What's there to help? You dropped your phone and now it's broken. You'll have to bring your phone into Apple for an out of warranty exchange. If you purchased Apple Care+ is will cost $49.00, if not, it will be $199.00
-
When I try to update or install apps on my iphone 3gs, it tells me my apple id is disabled, but when I log in on my pc it lets me. Any ideas what to do?
Try signing out, then back in on your phone: Settings>Store>Apple ID, tap the ID shown, sign out, sign back in. If that doesn't work, reset your password here: https://iforgot.apple.com.
-
There is also a "Hide" button at the bottom, but if I click that the window disappears. I have tried leaving it open, but nothing happens.
had a lot of trouble with this too. I had tried everything, from the internet time zone changing, restarting computers, physical time zone changing, firewalls, all that, and nothing worked.
but i just tried this and it worked.
1. in iTunes, go to Store, then go to authorize computer
2. sign in with your AppleID, and authorize your computer to purchase iTunes stuff.
that's it.
I scoured the internet and found nothing that said that had that as a solution.
hope it helps -
ok guys i have done my fair share of reading and i am so lost. on my box it says i have a 16 gig iphone 4 verizon white. my question is everytime i plug my phone in it pops up with a little tiny AutoRun icon and i hit open files. well it shows that i have 13.4gb of 26.2gb. but in iTunes it only shows my phone with 13.4 with 12 available for apps and music. why is it that my phone realy has 26 gigs and i can only access half of that?
Is my phone realy using 13gb just for software? that is way to much for me. any body else see this, what about any fixs or what not?There's no way a 16GB model phone has more than than capacity. I have no idea what you mean by AutoRun icon. Is that an app you downloaded? Did you jailbreak?
The "advertised" capacity of all storage devices is based on a decimal definition of "Gigabytes" where 1 GB is defined as 1,000,000,000 bytes. However computers see and calculate storage based on binary definitions where 1 GB = 1,073 742,824 bytes. Thus a 16 GB "decimal" device is only 14.9 real, binary gigabytes.
Also, there are additional loses due to formatting overhead and the iOS. RAM memory is separate and not used from the supplied flash disk. -
Those are pretty much the details. I have completely shut down and restarted. I have done a restore (which seemed to work for a while but then it went right back to doing what it had been doing).
Can you give the exact wording of the message that is telling you your laptop needs an update?
-
anybody have any idea?
https://forums.adobe.com/search.jspa?q=error+occurred+when+attempting+to+change+modules&pl ace=%2Fplaces%2F1383621&depth=…
-
wont run...
If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
My iPhone4 will not come on. When i plug it into the charger, it only says connect to iTunes. When I tried restoring it, it said my iPhone4 could not be restored.
Try this
http://support.apple.com/kb/HT1808 -
I am trying to download the new version of itunes and when I click check updates it says version 11.1 is available for an update. It then takes me to the app store on my mac and tells me that there are no available updates. How can i download the new version of itunes?
go to apple's website and download it!
http://www.apple.com/itunes/download/ -
My macbook pro, is telling me my password is incorrect. I have tryed to change it but it continues to tell me that my old password is incorrect? so i tryed to use the password that i had tryed to change it to and continues to tell me its incorrect. As well the hint for my old password continues to stay there?? Please help??
See #6 here for 10.6, 10.7, 10.8
..Step by Step to fix your Mac
If you don't have the 10.6 disk or it's damaged
Snow Leopard 10.6 password reset, no disk method
Maybe you are looking for
-
ITunes wont connect to the itunes store.
Every time I try to connect to the itunes store it says the network connection is timed out and to make sure my network settings are correct then try again. Anyone know how to change your network settings or resolve this problem? thanks
-
CO27, MF60 with serial number
Hi Everyone, Does anybody know whether we can post goods issue for component with serial number using t-code CO27 and MF60... if can, how? I know MB1A and MB1B works with serial number. Best Regards, Bin
-
Dear all, I am trying to sync user from AD01 to AD02 using FIM. I already installed FIM Sync & FIM service As far as I understand, I need to have 02 MA to connect to AD01 and AD02 and the flow seems to be like this AD01=====(MA01)=> CS01==> Metaverse
-
I am receiving "LabVIEW: VI Server access denied." from TestStand 2010. This is using LabVIEW 2011 on Windows 7 but only started happening after I had transitioned to using the Run-Time engine for a while. I ran into this when trying to convert back
-
Error:configuration of serial number 1pm0hm incompatible with document num
Hi Guys, When i enter a serial number in the delivery document, i get an error message saying "configuration of serial number 1pm0hm incompatible with document number " The material has serial number profile maintained in it and it is a configurable