Disc will not build

I'm trying to build a medium sized disc(2.3Gb) when it reaches "Muxing Menu 1 : Language 1 0% complete, it freezes and needs a force quit to get out of the window.
Anyone got any ideas about what I'm doing wrong - I know 99% of the time it's operator error, but after a couple of hours of manual reading and fiddling I don't seem to be getting anywhere
cheers

Well after a couple of days of experimenting I can answer the question myself, what I did was to systematically replace , one by one all the files used with files from previous projects that were successful, doing a test build after each replacement. It turned out to be a layered photoshop file used in a menu. I still have no idea why this file caused the problem, I rebuilt the menu with another similar file and there were no problems. Weird things computers - I've just had compressor make an mp4 file that quicktime won't play!
so it goes
sigh

Similar Messages

Discs Will Not Eject from Internal or External Burner

Am attempting to transfer my entire iTunes libraries to iTunes on a new PC. I go to backup on disk, choose "Backup entire iTunes Library and playlists", select the burner, and leave preferred speed at max possible. It says it will take six discs, I say OK, tray pops open, I insert disk and off it goes. At then end of the burn of disk one, it says insert a blank disc.
At this point, disc one will not eject no matter what. It does not eject automatically, it does not respond to manual commands from iTunes to eject, it does not respond to hitting the eject button. This is to say that the disc is captured and the tray will not open.
I have tried to burn the backup from the internal burner as well as from a USB external with the same results. No matter what, the disc will not eject. I have tried several combinations of sequences of commands, wasted 10 discs now (they are all disc burn #1 as I have gotten no further).
I want to transfer all of my extensive iTunes stuff to my new PC. Can anyone help me?

That is my exact question. I want to know how I can indicate a different drive to eject

I have a disc for Photoshop CS-6 and entered the redemption code; system says I'm all set and a serial number is not needed. Install program on disc will not proceed without serial number.

I have a disc for Photoshop CS-6 and entered the redemption code; system says I'm all set and a serial number is not needed. Install program on disc will not proceed without serial number. How do I resolved this Catch-22?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing Is there a fix for UConnect issue?

Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing it does is list all the songs alphabetically when connected via USB.

- Contact the manufacturer/go to their support site.
- Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Sometimes and ISO update breaks compatibioity and a firmware update the the dock is required or an iOS update is required.
Downgrading the iOS is not supported by Apple.

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just g

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?

Use the download version:
Download CS3 products
Mylenium

I have the remote disc drive from Apple for my Mac Book Pro. there is a disc in the remote drive that i want to remove. The devise is plugged into my Mac but the disc will not come out. HELP

I have the Apple remote disc for my Mac Book Pro OS X. I down loaded some files from a CD and now the disc will not eject. Can you tell me how to eject a CD from the drive? There are no buttons on the drive itself.

Try these options:
Credit Kappy.
Ciao.

HT3415 Ive formatted my iMac and now the applications disc will not install on my computer

Ive formatted my iMac as I am selling it on and now the applications disc will not install on my computer.

Isaac, Two knowledge base articles that may be of further help are:
Reinstalling Mac OS X 10.6http://support.apple.com/kb/PH6606
and Reinstalling Application Software that came with Mac OS X 10.6
Be sure to read them through if you have any further problems.
Regards,
Ralph

Elements 12 will not build previews

Elements 12 will not build previews but is shown as a Programme Error - how do you fix it ?

Hi peter gillard,
Try steps mentioned in given link below and let me know in case you face any issues:-
http://helpx.adobe.com/creative-suite/kb/change-system-default-printer.html
Sarika

Discs will not load

Under normal operating conditions discs will not load they eject after about five seconds.
Disc utility ,from the desktop,indicated numerous DVD permission errors which were rectified.Discs still would not load.
Starting from the install disc,which loaded,again showed DVD related permission errors and again rectified.Under normal conditions discs still would not load. No more permission errors.
Blank discs will load using Toast8 and will burn satisfactorily.
Ran extended hardware test from start up disc:clean bill of health.
Has the drive gone down? If so how can it load under above conditions?
The drive is a Matshita DVD-R UJ-846

Hi macmac1, and a warm welcome to the forums!
Tough to tell from here, but...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fail, it appears to be time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120

CS5 - Install Disc will not GO

I bought CS5 Master Suite. My install discs will not run on my computer. The discs hiccup, like they want to start, but refuse to even start. It isn't my DVD drive; it runs fine with other dvds. My OS is Vista, 64 bit, 6 gig ram 200 gig free hard drive space.I should be good to go.
I have read multiple complaints about this problem online. I have tried every fix suggested, short of formatting my harddrive, which is out of the question.
I have downloaded, installed and run windows installer, then the Adobe installer, and I have been (bit by bit) removing any and all programs off my harddrive that CS5 might find objectional. Please, someone tell me there is a magical fix that will make this all better!

Hi,
I do have a dual layer dvd drive. This morning it finally recognized the disc and I entered my serial number and started the installation. However, it is currently hung up at 9%. "Adobe Fonts Recommended" with 943 minutes remaining. The log file is pretty long, so I will just cut and paste the section that has had the installation hung up. At least I think this is the installation log file. Correct me if I am wrong and I will find what is needed. Note the time the fonts installation began was 10:34 AM. My current time is 11:50AM. We're not going anywhere, but I am afraid to end the installation, because I am afraid the DVD won't work again.
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 7 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{6D96660C-1444-410E-9A84-681C0AFB8937}] took 18266.2 miliseconds (18.2662 seconds) DTR = 88.4693 KBPS (0.0863958 MBPS)
User specified overrideFile:
Calling the custom action code for post-install for payload {6D96660C-1444-410E-9A84-681C0AFB8937} PDF Settings CS5
Calling the custom action code for pre-install for payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08}
::START TIMER:: [Pre payload :{E39A5ABD-516B-46F9-A042-694BBA6A4E08}]
Font Installer: productName is Recommended Common Fonts Installation
Font Installer: Using [AdobeCommon] path: C:\Program Files (x86)\Common Files\Adobe
Custom action return code: 0
:: END TIMER :: [Pre payload :{E39A5ABD-516B-46F9-A042-694BBA6A4E08}] took 16.2035 miliseconds (0.0162035 seconds)
::START TIMER:: [Payload Operation :{E39A5ABD-516B-46F9-A042-694BBA6A4E08}]
[ 4060] Sun Jan 09 10:34:10 2011 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
[ 4060] Sun Jan 09 10:34:11 2011 INFO
Extracting assets...

Disc will not load

Discs will not load into side slot . It rejects every sigle one even though they are loaded properly pushing the disc until my fingers touch the mac

have you restarted your machine ?

Disc will not enter - how can I fix problem?

Disc will not enter. Feels rubbery when disc is pushed into slot. Can this be fixed without technician?

1. Try and delete stalled Podcast
2. Sign out of Apple ID>Reboot>Sign in again

After a change...DVDSP disc will not run in PS2

I am having a weird issue with a DVD project that I am working on. I usually test each DVD that I burn on my Playstation 2. The PS2 DVD player can be kind of finicky at times, therefore I think it's a good barometer to test how well it will play in specific DVD players.
Anyway, I was burned over 30 discs of a project and they played fine on my PS2, however I had to make one tiny change to to one of the button titles in a menu. Suddenly the discs will not play in my PS2. Keep in mind that I have been using the same DVD media to burn, and that the PS2 has no problem reading other projects that I have burned.
The odd thing is that the disc will still play in nearly every other DVD player and nearly every computer, with the exception of one PC laptop. I am planning to distribute this project and I am concerned that the disc won't play in particular players such as a PS2.
If anyone can help please let me know...Thanks

Hi Mac,
Yes the playstation can be a pain at times and it's spec implementation can be very intolerant at times. We have Sony as one of our clients and being PS2 and PS3 friendly is of major importance to us as it often tends to be the DVD which goes with the Game ...... Fortunately for us we have the Sony emulators here.
Getting on to your problem, firstly does the old project still work?
And secondly, was the button in the first menu and what was the change?
My first thought would be to recreate that button.
Cheers

Im running windows 7 64 bit. installed itunes 10.5.4.1 and now cds will not import or play. If i have the cd in the drive and then open itunes it will importor play but after removed the next disc will not read. the system has passed the cd/dvd test.

Cd import/play problem. Downloaded itunes 10.5.. Cd will play and import when disc is present when itunes is opened. If itunes is open cd will not import or play. Itunes passed the cd/dvd test.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Studio XPS 8100 iTunes 10.5.1.42 QuickTime not available FairPlay 1.13.36 Apple Application Support 2.1.5 iPod Updater Library 10.0d2 CD Driver 2.2.2.0 CD Driver DLL 2.1.3.0 Apple Mobile Device 4.0.0.97 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.5.502 Gracenote MusicID 1.9.5.115 Gracenote Submit 1.9.5.143 Gracenote DSP 1.9.5.45 iTunes Serial Number 003AABF40351C940 Current user is an administrator. The current local date and time is 2011-12-01 17:19:39. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is supported. Core Media is supported. Video Display Information ATI Technologies Inc., ATI Radeon HD 5700 Series **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.5.1.42 (x64) is currently running. iTunesHelper 10.5.1.42 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** CD/DVD Drive Tests **** LowerFilters: PxHlpa64 (2.0.0.0), UpperFilters: GEARAspiWDM (2.2.2.0), D: HL-DT-ST DVD+-RW GH50N, Rev B103 Audio CD in drive. Found 16 songs on CD, playing time 72:03 on Audio CD. Track 1, start time 00:02:00 Track 2, start time 04:58:07 Track 3, start time 11:45:30 Track 4, start time 16:27:57 Track 5, start time 21:35:15 Track 6, start time 27:59:00 Track 7, start time 31:22:40 Track 8, start time 36:52:12 Track 9, start time 40:32:40 Track 10, start time 44:19:40 Track 11, start time 48:30:60 Track 12, start time 51:37:72 Track 13, start time 56:13:50 Track 14, start time 58:24:10 Track 15, start time 63:10:50 Track 16, start time 68:05:00 Audio CD reading succeeded. Get drive speed succeeded. The drive CDR speeds are: 4 8 16 24 32 40 48. The drive CDRW speeds are: 4. The drive DVDR speeds are: 4. The drive DVDRW speeds are: 4. Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off
I ve tried completely removing itunes and reinstalling. also unchecked autocorrect and find art and track names which did not work as well. Any ideas of how to fix this?

Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Studio XPS 8100 iTunes 10.5.1.42 QuickTime not available FairPlay 1.13.36 Apple Application Support 2.1.5 iPod Updater Library 10.0d2 CD Driver 2.2.2.0 CD Driver DLL 2.1.3.0 Apple Mobile Device 4.0.0.97 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.5.502 Gracenote MusicID 1.9.5.115 Gracenote Submit 1.9.5.143 Gracenote DSP 1.9.5.45 iTunes Serial Number 001CA97403888A88 Current user is not an administrator. The current local date and time is 2011-12-03 16:12:39. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is supported. Core Media is supported. Video Display Information ATI Technologies Inc., ATI Radeon HD 5700 Series **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.5.1.42 (x64) is currently running. iTunesHelper 10.5.1.42 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** CD/DVD Drive Tests **** LowerFilters: PxHlpa64 (2.0.0.0), UpperFilters: GEARAspiWDM (2.2.2.0), D: HL-DT-ST DVD+-RW GH50N, Rev B103 Audio CD in drive. Found 19 songs on CD, playing time 68:17 on CDROM-XA media. Track 1, start time 00:02:00 Track 2, start time 02:36:15 Track 3, start time 05:52:55 Track 4, start time 08:48:37 Track 5, start time 11:50:00 Track 6, start time 16:08:30 Track 7, start time 19:21:52 Track 8, start time 23:31:17 Track 9, start time 28:27:45 Track 10, start time 32:05:00 Track 11, start time 35:40:32 Track 12, start time 39:10:30 Track 13, start time 43:50:25 Track 14, start time 47:11:10 Track 15, start time 50:32:47 Track 16, start time 56:31:25 Track 17, start time 60:03:10 Track 18, start time 62:37:37 Track 19, start time 64:55:62 Audio CD reading succeeded. Get drive speed succeeded. The drive CDR speeds are: 4 8 16 24 32 40 48. The drive CDRW speeds are: 4. The drive DVDR speeds are: 4. The drive DVDRW speeds are: 4. Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off. Just turned pc on this is my test. Also dell has included a temp read in the dell support center. temp is 30 right now. Also listed was the max temp. in the pcs lifetime as 43.

Disc will not complete

when i put in disc it will not complete

Hi
when it gets to the end with multiplexing and burning it just sits there all day on the same thing and it never completes the burning.
How long is this ?
to me a single layer DVD with 2hour movie incl menu can take about 4 hours to get ready. DL - might take about 8hours.
If You look into Activity Movitor - it will say iDVD do not respond - THAT IS A LIE !
It should say - iDVD has to much to do to be able to respond - If You see how many percent CPU it uses - then it's not ZERO but anything like 80 to 150 % - so it has a full time shift.
IF YOU - Force Quit or Panic Halt - then You create problems for it and Your Mac - If so
• Run Repair Permissions - Disk Util tool - and -
• Run Repair Hard disk - Disk Util tool - but NOW You have to start from DVD or external hard disk to do this
• AND - trash iDVD pref file
This to prevent a Mac failure in future as Panic Halts builds up small errors that can lead to a severe Crash.
Yours Bengt W

Disc will not build

Similar Messages

Maybe you are looking for