Disco 11.1.1.3.0 'Retrieve data incrementally in groups of' setting

I found this comment in a metalink note:
Discoverer 10.1.2 introduced the ability to change the rows per page and columns per page at the worksheet level, rather than just at the workbook level. This change means that any pref.txt file changes to rows per page and columns per page will only apply globally to new workbooks and not existing workbooks.
We had the MaxRowsPerFetch set in the pref.txt file at 250 then had to change it to 10000. Some of our reports still retain the 250 setting and I cannot figure out how to set that to 10000 on the report. We can't do this setting at the user level because these are customer facing reports.
Short of recreating these reports from scratch, any ideas how I can change this value in the report definition?
Any ideas will be greatly appreciated.
Denise Klepfer
Edited by: user12021477 on Aug 26, 2010 11:39 AM

Oracle support gave me the solution to this issue. There is a hidden preference that can go in disco 11 pref.txt file called
RowsPerFetch.

Similar Messages

Can not retrieve data in Crystal Report

Hi,
I have a problem to load data from <i><b>Crystal Report</b></i> in an SBO form with the ActiveX DI object : the Crystal Report Viewer message display : <b><i>'Failed to retrieve data from the database. Details [Database Vendor Code:208]'</i></b>
It seems do not change the name of database in SQL Crystal Report query : My SQL query in Crystal Report file is a generic query : it must run with all custom database with the same datatable ; so the database name in FROM clause must be change with the SetLogonInfo : but it do not run !
Have you an idea ?
Francis
Here my code :
Public Class frm_CRViewer
' Adding References of project : CRAXDRT and CrystalActiveXReportViewerLib11
Private WithEvents MRO_CRV As
CrystalActiveXReportViewerLib11.CrystalActiveXReportViewer
Public Sub New()
Dim msa_Form As SAPbouiCOM.Form
Dim dsa_ActiveX As SAPbouiCOM.ActiveX ' Item <ActiveX> from form XML
dsa_ActiveX = msa_Form.Items.Item("axCRV").Specific()
dsa_ActiveX.ClassID = "CrystalReports11.ActiveXReportViewer.1"
MRO_CRV = dsa_ActiveX.Object
' Create the crystal application
Dim dob_ReportApp As New CRAXDRT.Application
' Open the report
Dim dob_Report As New CRAXDRT.Report
dob_Report = dob_ReportApp.OpenReport("c:MyTest.rpt")
' Defined to log on to the data source, and change the database name in FROM clause
Dim dob_Table As CRAXDRT.DatabaseTable
For Each dob_Table In dob_Report.Database.Tables
dob_Table.SetLogOnInfo("192.168.2.10", "AeroOneDemo", "sa", "45dfrfg5")
Next
' The report have a parameter in the sql query
dob_Report.ParameterFields.Item(1).DiscreteOrRangeKind = CRAXDRT.CRDiscreteOrRangeKind.crDiscreteValue
dob_Report.ParameterFields.Item(1).AddCurrentValue("15")
' Display the report in SBO form
Title = pst_ReportName
MRO_CRV.ReportSource = dob_Report
MRO_CRV.ViewReport()
End Sub
End Class

Try these ...
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
[url=http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460]http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460[/url]

Can we retrieve Data of Single Dimension in multiplecolumns in Excel Add-in

Hi All,
I have strange requirement of having single dimension in two columns while retrieving data from essbase using Excel Add-In.
Logically I feel it is not possible however we are looking if there is any possibilty of work arround for this requirement.
Whenevr i am trying to retrieve data using a macro on a single column we are able to successfully do it. But in case of multiple columns we are unable to do it.Do let us know if there is any work arround or alternative method to handle this requirement.
Regards,
Krishna

Not completely sure what you mean by "single dimension in two columns". Normally this request comes down to wanting to show multiple levels from a dimension, e.g...
_______________"Sales"
"100" "100-10" 12345
"100" "100-20" 34567...which is definitely not possible.
If you just mean data like this (with multiple columns from the same dimension)...
________"100-10" "100-20"
"Sales" 12345 34567...then that should work fine.
If you could post a sample of what you'd like to see, it would be easier to answer.

Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -1554760125
Exit facility code:            852
Exit error code:               15939
Exit message:                  Failed to retrieve data for this request.
Start time:                    2014-08-15 16:49:52
End time:                      2014-08-15 16:50:06
Requested action:              RunRules
Machine Properties:
Machine name:                  servername
Machine processor count:       8
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  Yes
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       1
Installation location:         c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition:          EXPRESS
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           True
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:
HELP:                          False
INDICATEPROGRESS:              False
INSTANCENAME:                  <empty>
PASSPHRASE:                    *****
QUIET:                         False
QUIETSIMPLE:                   False
RULES:                         GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE:                        AutoAdvance
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for this request.
    Data:
      HelpLink.ProdName = Microsoft SQL Server
      HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
      HelpLink.LinkId = 20476
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
        at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
        Stack:
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
                at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Any way to use OBDC in SAP to access MySQL DB and retrieve data

I'd like to logon to an external MySQL DB (can de done easily enough with PHP)   but I'd like to do it with ABAP if possible.
Connecting via OBDC I should be able to retreive the data from the DB and then use it in my SAP application.
Some databases will allow connection via
EXEC SQL.
connect to :dbsid
ENDEXEC.
EXEC SQL.
    set connection :dbsid
ENDEXEC.
EXEC SQL.
open xxxxxxx for
select
...... data from external DB
from tablespace in external db
ENDEXEC.
do.
EXEC SQL.
    fetch next XXXXXX into
           :db_table_field, .... etc
             ENDEXEC.
if sy-subrc ne 0.
    exit.
endif.
insert table int_sap_table.
enddo.
EXEC SQL.
close XXXXXX
ENDEXEC.
If you can make this type of stuff work for a MySQL DB i'd appreciate the answer.
Using PHP has a drawback as you need to have it installed on the front end PC and run in Foreground.
The EXEC SQL commands run in batch which is what you need if you are talking about 100,000's of records from an external DB.
Cheers
jimbo

Hi Graham
Currently it doesn't seem to support MySQL.
Now that SAP has taken over again the development of MAXDB I can't see it providing direct MySQL to SAP functionality.
MAXDB is available but that would mean changing the entire architecture and we don't want to do that.
I think probably the best route to go would be to create a BAPI which is capable of performing a logon to the remote MySQL DB server, get the data and either send it back as IDOCS, an external flat file, or as an internal table depending on the volume of data to be retrieved.
The good thing about MySQL is that the command line interface makes logging on and retrieving data quite simple.
This data is actually wanted in a BI / BW system to provide for a number of business proces analyses.
I did think abut using "Web Services" but the data retrieval will essentially be done offline.
There is no requirement currently for transferring data FROM SAP back to the MySQL database ( although if you've ever dealt with top level management you know how quickly developments can change).
PHP for all it's drawbacks is the really easy way - but we'll have a problem doing this in background from the SAP servers. For foreground tasks it's a real doddle if you have php on your front end.
for example
<?php
$username = "pee_wee";
$password = "let_me_in";
$hostname = "localhost";        */* IP address of remote DB server */*
$dbh = mysql_connect($hostname, $username, $password)
or die("Unable to connect to MySQL");
print "Connected to MySQL<br>";
// you're going to do lots more here soon
mysql_close($dbh);
?>
Batch mode also seems OK also from the documentation
http://dev.mysql.com/doc/refman/5.1/en/batch-mode.html
so running an ABAP which can issue system commands (readily available) should work in theory provided the SAP server can connect to the remote MySQL server machine.
Thanks for your suggestions however
Cheers
jimbo

NEED HELP IN USING ALL_TAB_COLUMNS FOR RETRIEVING DATA???

A table say T1 contains column like Emp_id,Code.
and there are several Code like C1,C2,C3.
Another table say T2 contains column like
Emp_id,C1,C2,C3.Here the value of the code field of the
T1 table is now column of the T2 table.And the amount of
each code of T1 table is equal to column value of T2
table.
Now I want to retrieve data from T2 table like
C1 200
C2 300
C3 140
I cannot retrieve data like this using all_tab_columns.
I can only getting the column_name but cannot its value.
PLEASE HELP ME...
Edited by: user630863 on Apr 8, 2009 11:37 AM

emp_id | code
001 | C1
001 | C2
005 | C3
005 | C1
002 | C2
002 | C3
Table T1
emp_id | C1 | C2 | C3
001 | 10 | 15 |
002 | | 7 | 12
005 | 45 | | 94
Table T2
I have written a query
select column_name from all_tab_columns a,T1 b
where a.column_name=b.code
and table_name='T2'
OUTPUT:
C1
C2
C3
But I Need data for each employee like
001 C1 10
001 C2 15
002 C2 7
002 C3 12
005 C1 45
005 C3 94
Edited by: user630863 on Apr 8, 2009 1:28 PM

Query Report:To Retrieve Data from A/R Invoice and A/P Invoice

Hii Experts,
I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
Expenditure and Revenue according to a Bussiness partner,
I am using union to retrieve the information,but it is saying a error that Error Converting Varchar to Numeric and also
i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
With Regards
Cherry.

Hii.
My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
Thanks & Regards
Cherry

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Crystal Report error trying to retrieve data from a user table

Hi,
I'm making crystal report application with VS 2005 and I need to retrieve data form a user table. I'm using Pull method, I configure the connection and parameters by code.
I think that the problem could be the @ that is used to identify these tables. Please, if some body had this problem before and have a solution, please let me know asap.
Thanks

Hi Andrea,
I had the same problem today. I upgraded from Crystal Version 8 to 11 and the problem was solved. Maybe it is too late for you, but I wanted to post the solution if anybody else has the same problem.
Regards
Guillermo

Submit MC.9 does not retrieve data in background processing.

Hi,
Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
kindly advise,
regards.
Message was edited by:
sheldon barretto

Hi Tushar,
Thanks for ur reply.
I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
Does it mean i cant run MC.9 in background.
regards,
Message was edited by:
sheldon barretto

How to retrieve data from xml file into obiee reports

Hi all,
I've got a situation here. A xml file is stored as blob in oracle database table. Now i need to retrieve data/info from that xml file into obiee reports. How am i supposed to proceed with this ?

I will go for a table function:
http://gerardnico.com/wiki/database/oracle/table_function
In two words, you can create a function that behave as a table. Then you create a function to pick up your xml, you parse it and you send back the rows.
I know that Oracle has also a library for XML files but I never use it until now.
Success
Nico

Retrieve data from a list in SharePoint 2013 provider hosted App using CSOM

I have developed a provider hosted app in SharePoint 2013. As you already know, Visual Studio creates web application and SharePoint app. The web application gets hosted inside IIS and the SharePoint App in SharePoint site collection. I'm trying to get
data from a list hosted in SharePoint using CSOM. But I get ran insecure content error.
here is my code in Default.aspx
<script type="text/javascript" src="../Scripts/jquery-1.8.2.js"></script>
<script type="text/javascript" src="../Scripts/MicrosoftAjax.js"></script>
<script type="text/javascript" src="../Scripts/SP.Core.js"></script>
<script type="text/javascript" src="../Scripts/INIT.JS"></script>
<script type="text/javascript" src="../Scripts/SP.Runtime.js"></script>
<script type="text/javascript" src="../Scripts/SP.js"></script>
<script type="text/javascript" src="../Scripts/SP.RequestExecutor.js"></script>
<script type="text/javascript" src="../Scripts/App.js"></script>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div>
<input id="Button1" type="button" value="Get title via CSOM" onclick="execCSOMTitleRequest()" /> <br />
<input id="Button2" type="button" value="Get Lists via CSOM" onclick="execCSOMListRequest()" />
</div>
<p ID="lblResultTitle"></p><br />
<p ID="lblResultLists"></p>
</form>
</body>
</html>
and App.js is:
var hostwebUrl;
var appwebUrl;
// Load the required SharePoint libraries
$(document).ready(function () {
//Get the URI decoded URLs.
hostwebUrl =
decodeURIComponent(
getQueryStringParameter("SPHostUrl")
appwebUrl =
decodeURIComponent(
getQueryStringParameter("SPAppWebUrl")
// resources are in URLs in the form:
// web_url/_layouts/15/resource
var scriptbase = hostwebUrl + "/_layouts/15/";
// Load the js files and continue to the successHandler
//$.getScript(scriptbase + "/MicrosoftAjax.js",
// function () {
// $.getScript(scriptbase + "SP.Core.js",
// function () {
// $.getScript(scriptbase + "INIT.JS",
// function () {
// $.getScript(scriptbase + "SP.Runtime.js",
// function () {
// $.getScript(scriptbase + "SP.js",
// function () { $.getScript(scriptbase + "SP.RequestExecutor.js", execCrossDomainRequest); }
function execCrossDomainRequest() {
alert("scripts loaded");
function getQueryStringParameter(paramToRetrieve) {
var params = document.URL.split("?")[1].split("&");
var strParams = "";
for (var i = 0; i < params.length; i = i + 1) {
var singleParam = params[i].split("=");
if (singleParam[0] == paramToRetrieve)
return singleParam[1];
function execCSOMTitleRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
//Load Web.
context.load(this.web);
context.executeQueryAsync(
Function.createDelegate(this, successTitleHandlerCSOM),
Function.createDelegate(this, errorTitleHandlerCSOM)
//success Title
function successTitleHandlerCSOM(data) {
$('#lblResultTitle').html("<b>Via CSOM the title is:</b> " + this.web.get_title());
//Error Title
function errorTitleHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM call: " + errorMessage);
function execCSOMListRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
// Get the Web lists.
collList = this.web.get_lists();
//Load Lists.
context.load(collList);
context.executeQueryAsync(
Function.createDelegate(this, successListHandlerCSOM),
Function.createDelegate(this, errorListHandlerCSOM)
//Success Lists
function successListHandlerCSOM() {
var listEnumerator = collList.getEnumerator();
$('#lblResultLists').html("<b>Via CSOM the lists are:</b><br/>");
while (listEnumerator.moveNext()) {
var oList = listEnumerator.get_current();
$('#lblResultLists').append(oList.get_title() + " (" + oList.get_itemCount() + ")<br/>");
//Error Lists
function errorListHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM Call: " + errorMessage);
Any solution is appreciated.

Hi,
To retrieve data from list in your provider-hosted app using SharePoint Client Object Model(CSOM), you can follow the links below for a quick start:
http://msdn.microsoft.com/en-us/library/office/fp142381(v=office.15).aspx
http://blogs.msdn.com/b/steve_fox/archive/2013/02/22/building-your-first-provider-hosted-app-for-sharepoint-part-2.aspx
Best regards
Patrick Liang
TechNet Community Support

Retrieve data from a synonym in oracle database through db connect

Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.

Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
                - Tools
                - SQL syntax
                - DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
                     Of course, you only need to install the client software if you are using BW with a non-Oracle database.
                     Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
                     After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
                     We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
                     To provide U data for users other than U, you can create views on other user tables as user U:
                     CREATE OR REPLACE VIEW viewname AS
                       SELECT * FROM QDB.tablename
                     You may have to grant SELECT privileges to user U in the QDB schema:
                        GRANT select ON QDB.tablename TO U
                     Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
                     !!! Synonyms do not yet work!!!
                     Synonyms that you can create as described below are another option for providing a complete table for the user U:
                       CREATE SYNONYM synoname FOR QDB.tablename
                     !!! Synonyms do not (yet) work!!!
                     After you have displayed the require data for user U, you can simply use
                       SELECT * FROM <view or table>
                     on the Q system to check which data is returned.
                     You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
      Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
    SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
      where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
       TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
       'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there.

Retrieve data from a dynamic page via loadURL

Hello.
I would like to ask you how it is possible to retrieve data
from a dynamic page (asp classic in my case) using the loadURL
method.
I would like to create an html authentication form (with
username and password fields). The loadURL method should call an
asp page and then pass to the usual function 'DoIfSucceded' the
results of the elaboration.
Of course I'm going to have a switch in the function in order
to make different actions depending from the results of the asp
page (authentication succeded or failed).
I had a look to the examples at this page:
Adobe
samples
Is there anyone who can explain clearly how the results data
must be written by the asp page and how the success function can
retrieve them ?
I thank you in advance for your help.

loadURL() uses the the XMLHttpRequest Object so if the
content you return is XML, you have 2 choices for accessing your
data. You can either access it as a text string via the
XMLHttpRequest object's responseText property, or as a DOM document
via the XMLHttpRequest object's responseXML property:
function MySuccessCallback(req)
// If my data is XML, I can access the data that was sent
from the server
// as DOM elements via the XMLHttpRequest's responseXML
property.
var xmlDOM = req.xhRequest.responseXML;
// OR, you can access the data sent back from the server as
text via
// the XMLHttpRequest object's responseText property.
var xmlAsAString = req.xhRequest.responseText;
var req = Spry.Utils.loadURL("GET",
"/app/book.php?id=1&code=54321", true, MySuccessCallback);
If your serverside script wants to use some other format as a
response like JSON or plain text, then you can only access the data
as text via the responseText property.
--== Kin ==--

Disco 11.1.1.3.0 'Retrieve data incrementally in groups of' setting

Similar Messages

Maybe you are looking for