Disconnecting from games and diagnostic logs checking

Several times an hour I disconnect from games and I cannot use the internet at all for about a minute until my modem (a Westell 327w) reconnects. I checked the diagnostic logs on my laptop's connection (using Windows 7) to the modem and got this. I would like to know what PADT is and why it is causing me to disconnect. Also I disconnected the first time i tried typing in this message.
Time: 23:26:7 LOGS Select a log...AllConnectionSystem
Connection Entries
CURRENT MODEM STATUS
DSL Modem Status....... Up
PPP Session Status...... Session halted
Connection Type......... PPPoE
Time set from............. Local
Time since last boot.... 0 days, 3 hrs: 50 mins: 25 secs
EVENTS
Events are listed starting from the most recent.
FRI JAN 21 23:26:06 2011
Disconnecting session(-1): due to PADT received
FRI JAN 21 23:26:06 2011
PPP DISCONNECTED on VPI 0 VCI 35 : PPP commanded down
FRI JAN 21 23:26:06 2011
Disconnecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:26:00 2011
LAN PC unable to communicate with DNS Server.(error = 'connection timed out', count=3)
FRI JAN 21 23:22:30 2011
PPP CONNECTED on VPI 0 VCI 35
FRI JAN 21 23:22:30 2011
Connecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:22:21 2011
Disconnecting session(-1): due to PADT received
FRI JAN 21 23:22:21 2011
PPP DISCONNECTED on VPI 0 VCI 35 : PPP commanded down
FRI JAN 21 23:22:21 2011
Disconnecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:20:20 2011
PPP CONNECTED on VPI 0 VCI 35
FRI JAN 21 23:20:19 2011
Connecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:20:10 2011
Disconnecting session(-1): due to PADT received
FRI JAN 21 23:20:10 2011
PPP DISCONNECTED on VPI 0 VCI 35 : PPP commanded down
FRI JAN 21 23:20:10 2011
Disconnecting session(0): Verizon due to dsl Restart

#1 Try to go to http://192.168.1.1/ .
#2 Then Choose Troubleshooting, and then click Transceiver Statistics.
#3 If Troubleshooting does not exist try go to System Monitoring, Advanced Monitors, and then choose Transceiver statistics.
#4 Post up the information you see on that page.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

HT201359 I cannot buy from game and apple store pleasea do the needful thanks

I cannot buy from game and from App Store please do the needful thanks

These are user-to-user forums, you are not talking to Apple here. If you are getting a message to contact iTunes support then you can do so via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If you are having a different problem ... ?

HT4623 Updated my iPhone 3gs yesterday (1st time ever). Backing up content to icloud but would not quit. Screen would not disappear. Finally disconnected phone from computer and lost EVERYTHING. Can I get it back?

Updated my iPhone 3gs yesterday to ios 6 (first time ever). Backed up my content to icloud, but it wouldn't quit. Remained on that screen for HOURS. Finally disconnected phone from computer. Still would not go away--just the "circle of death." Restarted phone and lost EVERYTHING (pics, contacts and apps). Can I get them back? Are they somewhere out in cyberspace or lost for good?

You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
So far I have tried the following to no avail:
Checked my pc's device manager - it recognises the device and says it is functioning properly.
Checked the drivers to make sure they are upt to date.
Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
Reinstalled the latest itunes.
Reset the ipod.
Put the ipod into disk mode and reconnected to itunes.
Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
At this point I dont really want to part with another $300 odd dollars for a new one.

Performance data from system and DMS logs on PDW.

I want all of ther performance data as given below of the particular completed job with respective login ID from system or DMS logs on PDW
What is total Memory and CPU used for completing the job?
How many rows processed?
What is read and write data size?
What is disk I/O ?
How much time taken for completing the job?
-Prasad KVSV

Hi Prasad, you may want to have a look at the following links:
http://download.microsoft.com/download/5/0/1/5015A62E-06BF-4DEC-B90A-37D52E279DE5/SQL_Server_2012_Parallel_Data_Warehouse_Breakthrough_Platform_White_Paper.pdf
http://saldeloera.wordpress.com/2012/08/27/pdw-tip-query-optimization-techniques-to-avoid-shufflemoves-and-partition-moves/
Regards, Leo

I work from home and they were checking my certificates and said that there is fiddleroot on my computer and I need it fixed. How do I do this?

I work from home and my headset is always cutting in and out and I am also being disconnected during work hours. This is a huge issue and talking to my tech support team they said that there is something called fiddleroot on my computer which makes certificates for every site I go to, which in turn makes my certificates I need for work not work. I need help removing this from my computer. Please help.

hello Tiffany2181982, unfortunately the fiddler2.com issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Photosmart 6520 keeps disconnecting from wifi

HI there I have 6520 and when it was new perfect, always ready to print, even from the HPweb print service. Then my router was changed to a dual frequency one 5gh and 2.4gh and ever since the printer drops wifi connection all by itself.
Nothing else behaves like this. I have tried changing the router channel to 11, still no improvement. I have also made sure the the two frequencies act as 2 routers. I tried using USB connection to my main PC as well, and that too will not print unless I restart the printer.
This is driving me mad now, it is as though the eco mode puts the printer to sleep but it will not wake up - can the ecomode be disabled???
Reading through the Forums this is an HP issue and new firmware is required as a matter of urgency!

Yes ECO mode can be disabled and should. Read your manual.
These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
   This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
   first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
2. Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going
   to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
   Assistant, Printer Home Page (EWS). Also check your Printers Properties.
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and
     8.8.4.4 at the Alternate DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Disconnecting from a running subvi (i.e., fork)

Is there a way to start a subvi running, but not wait for it to finish? That is, to fork or disconnect from the subprocess?
For example, my main timing program starts subvi 1 at certain intervals (say, 10 seconds). This subvi will, based on certain conditions, run subvi 2. Subvi 2 will take longer than 10 seconds to complete its job, but subvi 1 needs to be completed and ready to run again when the timing program calls it again 10 seconds later. It will not call subvi 2 this time, knowing it has not completed its job.
Thanks,
Karl.

Your SubVI1 needs to open a VI reference for SubVI2. This will load SubVI2 into memory. Normally I do this when starting the application. You have to provide a path to the Open VI Reference primitive and be aware that the path will change from development environment to built application.
Use this reference in SubVI1 to start SubVI2 with the invoke node "Run VI". You can set the Invoke node not to wait until completion. This will start the execution of SubVI2. If for any reason SubVI2 is running when calling the node you will get an error in the error out of the Invoke node but SubVI2 will continue running.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Phone is disconnecting from the "radio service" cant reconnect

I've lost my email and BB IM capabilities. Connection Manager says the radio service has been "turned off" I can't figure out to ' turn it back on"

My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
It did my head in for months.
Thanks guys, because of you, I worked this out. My Forester needed the "handsfree" setup, not just a Bluetooth pairing. Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
But only to initiate the hansfree component.
From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup. Because I'd done this originally, my old phone was in here. Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone. Now it auto connects everytime I get in the car
Woohoo.
Johnny

Disconnecting from the BES; curve 8830

After troubling my IT guy to connect me to my BES, I now realize that it interferes with too many of my thrid party applications (like ascendo money). How do I disconnect from the BES once my device has been established?
Solved!
Go to Solution.

Use BlackBerry Desktop Manager to make a backup of your BlackBerry so you don lose anything.

HT1349 i have an iPad 2 that disconnects from Safari and App Store regularly. Is there an easy fix

I have an ipad 2 that disconnects frequently from Safari and App Sotore. Any known fixes?

Yes.
http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen /

The iChat Agent process has unexpectedly quit, disconnecting you from all..

My iChat has been doing this all the time! I can't stay connected for more than an hour without iChat quitting on me and giving me this message:
*"Disconnected from iChat Agent. The iChat Agent process has unexpectedly quit, disconnecting you from all services. Logging in again will restart it."*
I have tried these steps to fix the problem with no success.
Step 1 - Repaired Permissions
Step 2 - Rebooted off of the DVD or CD and Repaired Disk
Step 3 - Went to /Users/user_name/Library/Preferences folder and deleted these files:
com.apple.iChat.plist
com.apple.iChat.Aim.plist
com.apple.iChat.Jabber.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
Step 4 - Reinstalled the **** thing.
My iChat works 100%, I have no issues connecting, video conferencing, screen sharing and etc. But every hour or so the connection drops and gives me that **** message!!! *"Disconnected from iChat Agent. The iChat Agent process has unexpectedly quit, disconnecting you from all services. Logging in again will restart it."* So have to keep reconnecting all the time! Sometimes I'm in a middle of a conference and the freackn' thing just drops!!!! (Even tho sometimes I do get that error but my video connection still works offline.... not sure how....)
I have been in several forums and no one was able to fix this issue! Can some official Apple guy help with this!!! I mean, ****!! What an annoying bug!! I really on iChat to communicate with co-workers and etc as I work remotely. If Adium had video support I wouldn't even wast my time to get this thing working, but iChat is still my best option(when the **** thing works)
Please any help is greatly appreciated.
And no its not my router and ISP and this happens with any connection(Coffee shops, public libraries, WiFi Hot Spots....)

I had the same problem a month or two ago. I spent a few hours on the phone with an Apple tech and after the fourth time calling back was transferred to a Product Specialist (the highest level of Apple technicians). The specialist recommended creating a test account on my Mac and trying to launch iChat to see if the problem was system-wide or a user based issue. When that didn't work I was out of options. What it unfortunately came down to was having to do an Archive and Install (which didn't work) and after hours of backing up did an Erase and Install. After all the smoke cleared and my computer was back to normal, iChat was back and fully functional as before.
IF YOU ARE USING TIME MACHINE:
*DO NOT* copy all of your files back onto your Mac. Only copy your documents and music, preferences and nothing else. Chances are you backed up the problem without even knowing it and you would just end up back where you started.
I did notice that my .Mac account still works in iChat but AIM does not (which just happens to be what I use to communicate with the rest of the world).
Good Luck!

I have i phone 4 from verizon and the power button is not working

I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone 8 months ago.
What options do I have and what should I do ?

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Where can i find the Audio Files from Games?

Who can help me i' am serching the folder for Audio Files from Games and Application's where can i find it by the way the sound folder from Application is not so important!

Google audio game files, this is a free link. but there are quite a few.
Hope you find the file you are loking for, plenty of hunting out there:)
http://soundbible.com/tags-game.html

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

Hi ..
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Make sure your Mac OS X software is up to date.
Disconnect the iPad from your Mac.
Open System Preferences > Software Update > Check Now
If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices.

Disconnect​ing from games and diagnostic logs checking

Similar Messages

Maybe you are looking for

Disconnecting from games and diagnostic logs checking