Disconnecting from the BES; curve 8830

After troubling my IT guy to connect me to my BES, I now realize that it interferes with too many of my thrid party applications (like ascendo money). How do I disconnect from the BES once my device has been established?
Solved!
Go to Solution.

Use BlackBerry Desktop Manager to make a backup of your BlackBerry so you don lose anything.

Similar Messages

Phone is disconnecting from the "radio service" cant reconnect

I've lost my email and BB IM capabilities. Connection Manager says the radio service has been "turned off" I can't figure out to ' turn it back on"

My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
It did my head in for months.
Thanks guys, because of you, I worked this out. My Forester needed the "handsfree" setup, not just a Bluetooth pairing. Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
But only to initiate the hansfree component.
From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup. Because I'd done this originally, my old phone was in here. Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone. Now it auto connects everytime I get in the car
Woohoo.
Johnny

HT1222 I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

Have you restarted your phone?
If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
Check for the app again after the phone starts back up.
~Lyssa

Why do applications (Illustrator, Pages, Mail) launch so slowly with spinning ball (about a minute to 90 seconds) when Mac is connected to our LAN, but when I disconnected Mac from the LAN, those applications launch instantly and function normally?

I hope I'm submitting this properly, I apologize if this irritates anyone because of improper etiquette. Why do applications (Illustrator, Pages, Mail) launch so slowly with spinning ball (about a minute to 90 seconds) when Mac is connected to our LAN, but when I disconnected Mac from the LAN, those applications launch instantly and function normally? This is a condition which seemed to start just recently and abruptly. These applications reside on, and are launched from the startup drive, not from a network drive. Also, we have a NAS drive on the LAN that we connect to that also takes a minute or two to mount, when it used to (before this problem) mount on the desktop in a matter of about 5 seconds. We have three identical Mac Pros on the LAN, and they all have this problem when launching and using the above mentioned applications. When I physically unplug the network cable from the Mac, all applications launch instantly and function normally. I know very little about networks, so I can't begin to test or change any setting pertaining to our network - if that is where the problem lies. The only recent change to our network situation is that we lost or our internet and phone service due to massive flooding here in Minot, North Dakota (our ISP tells us the communication lines are under water and shorting out). But shouldn't our LAN still function even though we have lost our connection to the outside world? Thanks so much, in advance, for helping me solve this problem. Sheldon.

Hi there.
A slow LAN can have many things so its going slow.
1) is your lan 1gbit speed? (full duplex)
2) are the macs also 1Gbit speed? (full duplex)
3) does your nas has a firewall? (so you can see what the mac asking there)
4) on the macs is the firewall on? (does the programms can pass the fw?)
5) how big is the nas and how many files/dirctorys are on the nas? (big folders speeds down )
many questions, but sometimes there is a solution.
regards tim

My Macbook keeps disconnecting itself from the internet

Recently, I bought a Macbook Pro in September and ever since I got it, the connection with the internet have been weird. It keeps disconnecting itself from the internet. I know it's not my router or home internet because my Touch and other laptops have a consistent connection. The Airport icon has a full bar. I can reconnect, but I have to go to Network Diagnostics constantly to connect back to the internet, only to be disconnected 10 seconds later.
Out of desperation, I figured I do a clean install of Snow Leopard (why not since my Macbook is new anyways)! The problem is still there, the Macbook is updated to Version 10.6.1. Can someone help please? Is it my network settings? Is anyone else having this problem? Ahhhh

Same problem, however my internet tends only to disconnect upon awakening after an extended period of sleep or after several hours of use. The problem does not occur when I connect to my schools network. I'm not sure whether the problem lies with my airport extreme - it works fine with other computers and registers with a green light even when faulty on my MBP. Also, simply turning the airport on and off does not always work for me - at some stages I have had to reset it - still to no avail. Connecting the base station to my computer by the ethernet connection does however re-establish the wireless connection on occasion. Also, I find after long periods of use my usually full airport connection drops a few bars and the internet slows down. Restarting the computer fixes this! Anyone got any idea where the problem lies??

WRT54G V8 Just disconnects me from the internet

HI Everyone,
     I am new to the forums so please forgive me
       I have a WRT56G V8 that I got maybe a year or two ago, because my last Linksys router V6 just bricked on me after I did a software update.. It said it was rebooting the router but never came back, the lights just kept flashing on it and that was all she wrote.
     So I did a RMA back to linksys, and they sent me this VERSION 8....
         Well I have CABLE INTERNET, and I leave everything pluged in and turned on all the time, I was told by my ISP to stop turning off the router and modem at night about a 2 years ago, so I leave everything connected and turned on and pluged into my UPS, so if the power goes out, I am connected still if I need the internet.
       Well, as of a couple days ago, I can just be sitting here typing away and talking to someone and all of a sudden, everything just disconnects.. Xchat, AIM, MSN, Email client, gtalk and then instantly reconnects like 5 sec later.
          I have been calling my ISP and griping to them about this and they after the 4th time this happened last week and I got tired of calling in, they said ok try your internet connection WITHOUT your router for 4 days and see if it disconnects again.
      Ok, well this has been 4 days and my internet is going strong and HAS NOT disconnected...
         I was using opendns at that time and thought that was it, so I went in and eraced the settings by using the DEFAULT SETTINGS button inside the router control panel because, for some reason, holding the RESET BUTTON in the back DOES NOT default back to the ADMIN ADMIN password and log on it retained all my settings.
       Anyways, after defaulting back to nomal settings unpluged it from the back and then back in just to make sure everything was reset, and reset the router up, I did an upgrade of the firmware and it has the latest firmware.
BOOM IT HAPPENED AGAIN!
So I am here to find out WHY it is happening and if my router is salvageable? I havent used it in 4 days, I am directly plugged in.
Thanks,
Christopher
~~ Christopher ~~
Check out my blog:
http://life-accordingtochristopher.blogspot.com/

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you have not done this since your last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
To reset the router press and hold the reset button for 45 seconds...Release the reset button...Unplug the power cable from your router, wait for 45 seconds and re-connect the power cable...Now re-configure your router and see if this fixes your problem...

Disconnecting from games and diagnostic logs checking

Several times an hour I disconnect from games and I cannot use the internet at all for about a minute until my modem (a Westell 327w) reconnects. I checked the diagnostic logs on my laptop's connection (using Windows 7) to the modem and got this. I would like to know what PADT is and why it is causing me to disconnect. Also I disconnected the first time i tried typing in this message.
Time: 23:26:7 LOGS Select a log...AllConnectionSystem
Connection Entries
CURRENT MODEM STATUS
DSL Modem Status....... Up
PPP Session Status...... Session halted
Connection Type......... PPPoE
Time set from............. Local
Time since last boot.... 0 days, 3 hrs: 50 mins: 25 secs
EVENTS
Events are listed starting from the most recent.
FRI JAN 21 23:26:06 2011
Disconnecting session(-1): due to PADT received
FRI JAN 21 23:26:06 2011
PPP DISCONNECTED on VPI 0 VCI 35 : PPP commanded down
FRI JAN 21 23:26:06 2011
Disconnecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:26:00 2011
LAN PC unable to communicate with DNS Server.(error = 'connection timed out', count=3)
FRI JAN 21 23:22:30 2011
PPP CONNECTED on VPI 0 VCI 35
FRI JAN 21 23:22:30 2011
Connecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:22:21 2011
Disconnecting session(-1): due to PADT received
FRI JAN 21 23:22:21 2011
PPP DISCONNECTED on VPI 0 VCI 35 : PPP commanded down
FRI JAN 21 23:22:21 2011
Disconnecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:20:20 2011
PPP CONNECTED on VPI 0 VCI 35
FRI JAN 21 23:20:19 2011
Connecting session(0): Verizon due to dsl Restart
FRI JAN 21 23:20:10 2011
Disconnecting session(-1): due to PADT received
FRI JAN 21 23:20:10 2011
PPP DISCONNECTED on VPI 0 VCI 35 : PPP commanded down
FRI JAN 21 23:20:10 2011
Disconnecting session(0): Verizon due to dsl Restart

#1 Try to go to http://192.168.1.1/ .
#2 Then Choose Troubleshooting, and then click Transceiver Statistics.
#3 If Troubleshooting does not exist try go to System Monitoring, Advanced Monitors, and then choose Transceiver statistics.
#4 Post up the information you see on that page.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I have just been clearing one of my computers ready to sell. I disconnected it from the cloud, and immediately all my files on the cloud appear to have been deleted so that my other computers appear to have lost them too! Any ideas!

I have just been cleaning a iMac preparatory to sale and disconnected it from me.com then started deteting files. It seems to have deleted everything from the cloud too, so now my other computers cant see the files. Any ideas what I have done and more importantly what I can do to correct things?

The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one.

HT201415 My new i pad keeps disconnecting me from the internet not sure why.

Recently purchased the i pad and keeps disconnecting from the internet? Not sure why?
Shaun

MacBook Pro (Late 2008 and 2009) forums are here:
http://discussions.apple.com/category.jspa?categoryID=251

Disconnecting from a running subvi (i.e., fork)

Is there a way to start a subvi running, but not wait for it to finish? That is, to fork or disconnect from the subprocess?
For example, my main timing program starts subvi 1 at certain intervals (say, 10 seconds). This subvi will, based on certain conditions, run subvi 2. Subvi 2 will take longer than 10 seconds to complete its job, but subvi 1 needs to be completed and ready to run again when the timing program calls it again 10 seconds later. It will not call subvi 2 this time, knowing it has not completed its job.
Thanks,
Karl.

Your SubVI1 needs to open a VI reference for SubVI2. This will load SubVI2 into memory. Normally I do this when starting the application. You have to provide a path to the Open VI Reference primitive and be aware that the path will change from development environment to built application.
Use this reference in SubVI1 to start SubVI2 with the invoke node "Run VI". You can set the Invoke node not to wait until completion. This will start the execution of SubVI2. If for any reason SubVI2 is running when calling the node you will get an error in the error out of the Invoke node but SubVI2 will continue running.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

IChat disconnects me from the internet every 30 mins....why?

I'm running 10.5.6 but this was going on during 10.5.5 as well: When I launch iChat (4.07) my airport goes out and/or I'm disconnected from the internet for about 30 seconds after which everything reconnects. Then, about every 30 minutes it does the same thing - even while video chatting. I thought it may be my router because this does NOT happen at my brother's - but Adium and Skype w/ Video do NOT disconnect me or themselves when I'm connected to my router -- so I'm at a loss. Any ideas?

iChat does tend to show up a lot more minor glitches with the Internet connection than other apps.
Obviously a Mail app only uses it now and then as does a Web Browser.
A download or Video Stream would show something more regular with pauses and slowdowns or stuttering.
A WiFi Connection would be likely to be influenced by external factors like power surges in cabling, Microwaves the other side of walls (General Electro Magnetic Stuff) going on around, either near either Router of computer or in between.
10:30 PM Saturday; January 3, 2009

IChat disconnects me from the internet every 30 mins....

I'm running 10.5.6 but this was going on during 10.5.5 as well: When I launch iChat (4.07) my airport goes out and/or I'm disconnected from the internet for about 30 seconds after which everything reconnects. Then, about every 30 minutes it does the same thing - even while video chatting. I thought it may be my router because this does NOT happen at my brother's. Adium and Skype w/ Video do NOT disconnect me or themselves when I'm connected to MY router -- so I'm at a loss. Any ideas?

iChat does tend to show up a lot more minor glitches with the Internet connection than other apps.
Obviously a Mail app only uses it now and then as does a Web Browser.
A download or Video Stream would show something more regular with pauses and slowdowns or stuttering.
A WiFi Connection would be likely to be influenced by external factors like power surges in cabling, Microwaves the other side of walls (General Electro Magnetic Stuff) going on around, either near either Router of computer or in between.
10:30 PM Saturday; January 3, 2009

Why does my ipod disconnect me from the internet at a certain time every night?

Every night at 9 pm my Ipod disconnects me from every app that requires internet. It says I am still connected to the internet but I still can't access my apps. I'm not sure what time it reconnects me in the morning. My Ipod had not been doing this until I got the latest update. I'm not sure if there is anything I can do to change this but if there is I would like to. I have gone through my Ipod and there are no restrictions set that I have noticed.

Maybe your Internet Service Provider shuts down some server at 9pm every day.

Listening and DL'ing from the iTunes Store with iTunes 6

I like iTunes 6. It runs far less buggy on my pc. But whenever I try to preview a song, it gives me an error code (-208) and won't play a song. Ditto for downloading. Also, I have to relog in every couple of minutes no matter what.
The first suggestion apple makes is to upgrade to the newest version. But I don't WANT to upgrade to the newest version!
Am I SOL?

Probably. Right now, I can't find exactly what the oldest version of iTunes is that will still allow you to purchase from the store. Older versions of iTunes are usually disabled at some point in time to plug security holes in the store & the older versions will be disabled without notice. The only thing that should be affected as you have discovered is your use of the store with an older version. I will keep looking about version number & post back if I find it. Sorry.

Photosmart 6520 keeps disconnecting from wifi

HI there I have 6520 and when it was new perfect, always ready to print, even from the HPweb print service. Then my router was changed to a dual frequency one 5gh and 2.4gh and ever since the printer drops wifi connection all by itself.
Nothing else behaves like this. I have tried changing the router channel to 11, still no improvement. I have also made sure the the two frequencies act as 2 routers. I tried using USB connection to my main PC as well, and that too will not print unless I restart the printer.
This is driving me mad now, it is as though the eco mode puts the printer to sleep but it will not wake up - can the ecomode be disabled???
Reading through the Forums this is an HP issue and new firmware is required as a matter of urgency!

Yes ECO mode can be disabled and should. Read your manual.
These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
   This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
   first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
2. Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going
   to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
   Assistant, Printer Home Page (EWS). Also check your Printers Properties.
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and
     8.8.4.4 at the Alternate DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Disconnect​ing from the BES; curve 8830

Similar Messages

Maybe you are looking for

Disconnecting from the BES; curve 8830