Disconnect JCO Connection
Hi,
In WebdynPro Application without using Adaptive RFC, we are able to disconnect a connection after few seconds as we using disconnect() method for that.
But for a WebdynPro Application using Adaptive RFC, we are not able to disconnect a connection as fast as we were able to do in first case.
We are using following to disconnect:
wdContext.currentInputElement().modelObject().modelInstance().disconnectIfAlive();
In SM04 transaction, we observed that the connection(Adaptive RFC) is taking more time to close than it is taking for without Adaptive RFC WD application. The connection still exists even the memory utilized becomes 0 MB.
Also, when we are not disconnecting in Adaptive RFC WD application, then memory is utilized as long as connection exists. But, when we are disconnecting the connection, the memory utilized is 0 MB though the connection still exists.
While creating the JCo connection for metadata and modeldata we gave:
Max pool size : 5
Max connection: 1000
Connection Timout (msec.) : 1000
Maximum Waiting Time (msec.): 5000
Can anybody suggest how to disconnect the connection to overcome above problem?
Thanks and Regards,
Vaibhav
Hi
Check this URL
Actually The Connection will be Terminated when it is inactive for particular time
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a">Jco Connection Pools</a>
Regards
Chandran S
Similar Messages
-
Unable to close metadata jco connection
Hi Experts,
when checking the JCo Connection Pools in Web Dynpro Console, I found that all MetaData JCo are in use and unable to disconnect automatically.
the following is metadata jco destination setting
Maximal Pool Size 1
Maximum Connections 5
Connection Timeout 60
Maximum Wait Time 10
how can i do to close these jco connection?Hi Sidney,
I dont really understand why you want to remove the Jco connections. If you click on the "Remove" button as posted earlier by someone, it will completely remove your Jco configurations and you have to create them again on your own. SO, dont do that.
If you want to disconnect the Jco connection in webdynpro java, we can do that by using the following piece of code at the end of the connection process.
As far as I know, by default the Jco connections gets disconnected after certain time limit. Because, I never had to disconnect the Jco whenever I used one.
wdContext.currentModelElement().modelObject().modelInstance().disconnectIfAlive()
Regards,
Gopal. -
JCO - Connection reset by peer - after 5 minute timeout
Hello
We're using SUP with the JCO Connector. This has been working flawlessly since project inception. Now, after switching to a new data center (Windows Server 2008 Server Enterprise Edition, SP2 on VMWare) we're observing a mysterious behavior with timeouts of idle connections. I hope someone in this forum knows what this might be.
JCO connections originate from SUP servers. When such connections are idle for more than 5 minutes they get disconnected from SAP -- this is in agreement with SAP timeout parameter of 300 seconds.
On our new systems we noticed that requests sent 5min+ (after timeout) show following error:
Thread-8 [22:08:55:343]: [JNI-LAYER] RFC.nativeExecute() before RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeExecute() after RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88) = RFC_SYS_EXCEPTION
Thread-8 [22:08:55:344]: [JAV-LAYER] JCO.Client.execute (Z_U_ONEMOBILE_SWO_SEARCH) threw a NON-ABAP exception: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: CPIC-CALL: 'CMRCV : rc=20
ERROR connection to partner '---removed!---:3299'
broken
TIME Fri Feb 11 18:08:55 201
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -6
MODULE nixxi.cpp
LINE 4448
DETAIL NiIWrite: P=161.88.23.170:3299; L=0.0.0.0:49730
SYSTEM CALL WSASend
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 3
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() enter, [SUCCESS]
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() before RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() after RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() with rc = RFC_OK leave, [SUCCESS]
Our suspicion is that the JCO client doesn't notice the fact that it gets disconnected. We used Network Monitor 3.4 to look at network traffic. Indeed, after 5 minutes the client gets a single frame (with reset flag) and no acknowledgement goes back.
What could this be?
We use
JCO 2.1.8 AMD 64-bit (contains librfc 6.40) and
JCO 2.1.9 AMD 64-bit (contains librfc 6.40) but replaced this with librfc 7.10 (after seeing Note 825494). Behavior was exactly the same. We did confirm in jco/rfc trace that those versions were actually used.
Any ideas?
Thanks and regards
Edited by: B. Gottipati on Feb 14, 2011 9:17 PMHello
We're using SUP with the JCO Connector. This has been working flawlessly since project inception. Now, after switching to a new data center (Windows Server 2008 Server Enterprise Edition, SP2 on VMWare) we're observing a mysterious behavior with timeouts of idle connections. I hope someone in this forum knows what this might be.
JCO connections originate from SUP servers. When such connections are idle for more than 5 minutes they get disconnected from SAP -- this is in agreement with SAP timeout parameter of 300 seconds.
On our new systems we noticed that requests sent 5min+ (after timeout) show following error:
Thread-8 [22:08:55:343]: [JNI-LAYER] RFC.nativeExecute() before RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeExecute() after RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88) = RFC_SYS_EXCEPTION
Thread-8 [22:08:55:344]: [JAV-LAYER] JCO.Client.execute (Z_U_ONEMOBILE_SWO_SEARCH) threw a NON-ABAP exception: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: CPIC-CALL: 'CMRCV : rc=20
ERROR connection to partner '---removed!---:3299'
broken
TIME Fri Feb 11 18:08:55 201
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -6
MODULE nixxi.cpp
LINE 4448
DETAIL NiIWrite: P=161.88.23.170:3299; L=0.0.0.0:49730
SYSTEM CALL WSASend
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 3
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() enter, [SUCCESS]
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() before RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() after RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() with rc = RFC_OK leave, [SUCCESS]
Our suspicion is that the JCO client doesn't notice the fact that it gets disconnected. We used Network Monitor 3.4 to look at network traffic. Indeed, after 5 minutes the client gets a single frame (with reset flag) and no acknowledgement goes back.
What could this be?
We use
JCO 2.1.8 AMD 64-bit (contains librfc 6.40) and
JCO 2.1.9 AMD 64-bit (contains librfc 6.40) but replaced this with librfc 7.10 (after seeing Note 825494). Behavior was exactly the same. We did confirm in jco/rfc trace that those versions were actually used.
Any ideas?
Thanks and regards
Edited by: B. Gottipati on Feb 14, 2011 9:17 PM -
JCO connection error:Couldn't create JCOClientConnection for logical System
Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error saying Could not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022 Minimum value of JCo Pool Size in total = 80
u2022 Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022 Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
PriyankaHi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet -
Regarding doubt in JCO Connection
Hai,
I am doing jco connection in jsp page. its getting executed with out any errors. i have give the detaisl below whci is working fine but where i have to mention the url of "bsp page" ie (http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci1154530,00.html) . Please go through the code below so that by establishing the following connection it should (ie take username and password automatically) straightly go that url mentioned.
client = JCO.createClient( "020", // SAP client "balal", // userid
"143bala", // password "EN", // language
"sealerp.sealconsult.com", // host name "00" ); // system number
<%@ page import="com.sap.mw.jco.*" %>
<html>
<head>
</head>
<body >
<form name="form1">
<%
//String paramView = request.getParameter("h1")==null?"":request.getParameter("h1");
//if(paramView.equals("view"))
JCO.Client client = null;
JCO.Repository mRepository;
try {
// Print the version of the underlying JCO library
// out.println("\n\nVersion of the JCO-library:\n" +
\n" + JCO.getMiddlewareVersion());
// Create a client connection to a dedicated R/3 system
client = JCO.createClient( "020", // SAP client
"balal", // userid
"143bala", // password
"EN", // language
"sealerp.sealconsult.com", // host name
"00" ); // system number
// Open the connection
client.connect();
mRepository = new JCO.Repository("seal",client);
// Get the attributes of the connection and print them
JCO.Attributes attributes = client.getAttributes();
out.println("Connection attributes:\n" +"----
\n" + attributes);
// All done
out.println("\n\nCongratulations! It worked.");
catch (Exception ex) {
out.println("Caught an exception: \n" + ex);
finally {
// do not forget to close the client connection
if (client != null) client.disconnect();
%>
</form>
</body>
</html>
Please help me in getting solution.
Thanks in Advance.
Thanks & Regards,
Giridhar.Hai,
sorry i have mentioned wrong bsp url. please check this url.
http://sealerp.sealconsult.com:8080/sap/bc/bsp/sap/zbsp_primv/project.htm
the above the bsp page url to be viewed.
Please help me.
Thanks in Advance.
Thanks & Regards,
Giridhar. -
Can we use JCo connection with non-Web Dynpro J2EE project in NW
With Web Dynpro, we have the RFC wizard to call RFCs using JCo connection. I am wondering, if I create a J2EE project in NW development studio, can I and how to use JCo connection to call RFCs?
Thanks.yes, of course.
Add jar sapjco.jar then
import com.sap.mw.jco.*;
public class Bapi1 extends Object {
JCO.Client mConnection;
JCO.Repository mRepository;
public Bapi1() {
try {
// Change the logon information to your own system/user
mConnection =
JCO.createClient("001", // SAP client
"<userid>", // userid
"****", // password
null, // language
"<hostname>", // application server host name
"00"); // system number
mConnection.connect();
mRepository = new JCO.Repository("SAPJCo", mConnection);
catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
JCO.Function function = null;
JCO.Table codes = null;
try {
function = this.createFunction("BAPI_COMPANYCODE_GETLIST");
if (function == null) {
System.out.println("BAPI_COMPANYCODE_GETLIST" +
" not found in SAP.");
System.exit(1);
mConnection.execute(function);
JCO.Structure returnStructure =
function.getExportParameterList().getStructure("RETURN");
if (! (returnStructure.getString("TYPE").equals("") ||
returnStructure.getString("TYPE").equals("S")) ) {
System.out.println(returnStructure.getString("MESSAGE"));
System.exit(1);
codes =
function.getTableParameterList().getTable("COMPANYCODE_LIST");
for (int i = 0; i < codes.getNumRows(); i++) {
codes.setRow(i);
System.out.println(codes.getString("COMP_CODE") + '\t' +
codes.getString("COMP_NAME"));
catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
try {
codes.firstRow();
for (int i = 0; i < codes.getNumRows(); i++, codes.nextRow()) {
function = this.createFunction("BAPI_COMPANYCODE_GETDETAIL");
if (function == null) {
System.out.println("BAPI_COMPANYCODE_GETDETAIL" +
" not found in SAP.");
System.exit(1);
function.getImportParameterList().
setValue(codes.getString("COMP_CODE"), "COMPANYCODEID");
function.getExportParameterList().
setActive(false, "COMPANYCODE_ADDRESS");
mConnection.execute(function);
JCO.Structure returnStructure =
function.getExportParameterList().getStructure("RETURN");
if (! (returnStructure.getString("TYPE").equals("") ||
returnStructure.getString("TYPE").equals("S") ||
returnStructure.getString("TYPE").equals("W")) ) {
System.out.println(returnStructure.getString("MESSAGE"));
JCO.Structure detail =
function.getExportParameterList().
getStructure("COMPANYCODE_DETAIL");
System.out.println(detail.getString("COMP_CODE") + '\t' +
detail.getString("COUNTRY") + '\t' +
detail.getString("CITY"));
catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
mConnection.disconnect();
public JCO.Function createFunction(String name) throws Exception {
try {
IFunctionTemplate ft =
mRepository.getFunctionTemplate(name.toUpperCase());
if (ft == null)
return null;
return ft.getFunction();
catch (Exception ex) {
throw new Exception("Problem retrieving JCO.Function object.");
public static void main (String args[]) {
Bapi1 app = new Bapi1();
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/35/42e13d82fcfb34e10000000a114084/frameset.htm] -
JCO connection pool is exhausted
hi
I am using RFC module in my web dynpro application. When the application is used for sometime, the JCO connection will get exhusted. The JCO connection will not release itself. I can't find any method in web dynpro to release the connection manually. How can I solve this problem?Hi,
What is scope of the connection. View properties of MODELDATA and METADATA destinations.
You can change the scope of the connection..
or
wdContext.current<BAPI INPUT>Element().modelObject().modelInstance().disconnectIfAlive();
For more ways , give a forum search.. There are a lot of close forum posts.. Gud luc..
Regards
Bharathwaj -
Problem with JCo Connection Pool
Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan -
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
How to use a JCO connection pool in an EJB?
Hi *,
I want to build a WebService using SAP Web AS (J2EE Engine) that connects to a R/3 ERP (release 4.7).
I thought of building a stateless session bean that will be deployed as webservice. The session bean shall connect to the R/3 in order to call some BAPIs. I'd like to use a JCO connection pool. But I'm not sure, where I should create and destroy the connection pool. Are the EJB methods ejbCreate() and ejbRemove() the right ones? If so, my businness methods would just have to get a connection from the pool and call the BAPIs, right? If not, what do you suggest?
Another question: I already deployed a bean as webservice. Since not really knowing how to use the connection pool, I created a bean with one business method that creates a connection pool whenever it gets called. But if I have to change something in the bean so that I have to redeploy the bean I can't call my business method anymore, because JCO cannot load a native library once again, as it is already loaded, This leads to an exception. So I have to restart the complete engine everytime I redeploy my bean. Are there any workarounds for this problem? I'm not sure whether this is connected to the wrong use of the JCO connection pool.
Kind regards,
LarsHi *,
I want to build a WebService using SAP Web AS (J2EE Engine) that connects to a R/3 ERP (release 4.7).
I thought of building a stateless session bean that will be deployed as webservice. The session bean shall connect to the R/3 in order to call some BAPIs. I'd like to use a JCO connection pool. But I'm not sure, where I should create and destroy the connection pool. Are the EJB methods ejbCreate() and ejbRemove() the right ones? If so, my businness methods would just have to get a connection from the pool and call the BAPIs, right? If not, what do you suggest?
Another question: I already deployed a bean as webservice. Since not really knowing how to use the connection pool, I created a bean with one business method that creates a connection pool whenever it gets called. But if I have to change something in the bean so that I have to redeploy the bean I can't call my business method anymore, because JCO cannot load a native library once again, as it is already loaded, This leads to an exception. So I have to restart the complete engine everytime I redeploy my bean. Are there any workarounds for this problem? I'm not sure whether this is connected to the wrong use of the JCO connection pool.
Kind regards,
Lars -
Single Webdynpro Application with multiple JCO Connection ?
Hi Experts,
I have a strange requirement ......
We have a Webdynpro Application which is connected to
say (using JCO connection)
client:- A
now i want to connect the same Webdynpro application to
Client:- B which is again in the same server as the client A.
Please help me how to handle this.
how it possible to connect a single Webdynpro application to two different clients using JCO Connection.
Please help.
Points would be rewarded to helpful answers.
Regards,
Sanjyoti.Hi experts
We have to use wd application for both client at a same time e.g. as follow
Client A -
> Travel app--->Featches data from A for employee hired in client A ,in same server as B
Client B -
> Travel app--->Featches data from B for employee hired in client B , in same server as A
we are using same EP for both client but using diffrent roles for employees of both client.
Please reply asap. -
Error while obtaining JCO connection when creating JCO connection
Hey,
im having a problem when creating a JCO connection in the Web Dynpro Content Administrator. Creating the Modeldata (Application Data Data type) JCO Worked but when creating the JCO for the RFC Metadata (Dictionary Meta data) there is a problem:
In step 3.2 Msg server connection I cannot specify a system name and logon group, only the message server can be selected with the dropdown box.
After pushing the finish button i get the following stacktrace:
Failed to create new JCO client connection WD_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at
com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at
com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at
com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at
com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at
com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at
com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at
com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649) at
com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at
com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248) at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at
com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95) at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for WD_RFC_METADATA_DEST at
com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:664) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:508) at
com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:248) at
com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:222) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:101) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) ... 30 more Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:393) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:558) ... 35 more
We are running WebAS 640 SP 14 on Unix.
Greetings,
Hannes
Message was edited by: Hannes DeflooHi
Please configure your SLD. Your SLD holds the system definition. Define a SAP WebAS abap system and then try to create a Metadata connection using WebDynpro content administrator. Now you will be able to see the msg server defined in the dropdown. Also ensure that you have the message server entry in your services file.
Refer these links for SLD
http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Hope that helps.
regards
Ravi -
Error while creating jco connection for metadata?
Hi all,
we are using ep 6 sp 16.
I could create the JCO connection for application data but i am not able to create the jco connection for metadata for the same r3 server .
while creating the the connection
system name and logon group and disable
and when i click finish
it is giving following error
Failed to create new JCO client connection testmetadata: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for testmetadata at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:670) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:606) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:564) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanking.
RajendraHello Rajendra,
Good to hear from u. Let me try to give a soln for this problem of yours.
I think probably the logon group has not been specified in the backend.If thats the case then do the following:
Connect to the backend server for which you are trying to create the JCO. Run the transaction SMLG. It will show u the existing logon groups. carry out the following steps if the 'PUBLIC' group is not present in the list of logon groups.
Click on the create button. In the pop-up, type the logon as 'PUBLIC'. For the instance, select the F4 help and choose the existing instance number. Click on copy and click save. Try running the transaction /nsmlg and now it should show the logon group 'PUBLIC'.
When you create the JCO connection, it should now show the logon group 'PUBLIC'.
Regards,
Prathamesh. -
Error while obtaining JCO connection.
Hi I'm trying to put in place since BW-SEM RSPLAN the transaction, I'm pointing at my portal from the transaction RSPLSA
But when it signs the user gets the message Error while obtaining JCO connection.
I was reviewing my WebDynpro on my site by following these steps:
1 I will http://portal:port
2 I clicked Webdynpro
3 I click on Content Administrator
I clicked on 4 Maintain JCO destinations
and then I log shows the following:
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:485)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.updateJCOClientStatus(JCOConnectionsDetails.java:480)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:699)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:663)
... 39 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.3) Gecko/2008092417 Firefox/3.0.3
Version null
DOM version null
Client Type ns7
Client Type Profile nn7
ActiveX disabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0014.20071210061512.0000 (release=645_VAL_REL, buildtime=2007-12-10:05:23:29[UTC], changelist=470565, host=pwdfm101), build date: Wed Oct 01 12:15:02 CDT 2008
J2EE Engine 7.00 patchlevel 109886.44
Java VM IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system AIX, version: 5.3, architecture: ppc64
Session & Other
Session Locale en_US
Time of Failure Thu Nov 06 16:00:23 CST 2008 (Java Time: 1226008823202)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:485)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.updateJCOClientStatus(JCOConnectionsDetails.java:480)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:699)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:663)
at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.wdDoInit(JCOConnectionsDetails.java:121)
at com.sap.tc.webdynpro.tools.explorer.wdp.InternalJCOConnectionsDetails.wdDoInit(InternalJCOConnectionsDetails.java:262)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:881)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
What should I do??Hi Antonio,
Follow the below note for Jco related troubleshooting.
https://service.sap.com/sap/support/notes/919850
Are you able to see the 4 Jco connections green?
Regards,
Debasis. -
Error while obtaing JCO connection
In Bussiness planning in portal. When i click Planning tab in Enterprise portal, its throwing an error that "error while obtaining JCO connection". I cant proceed furtherI
I am working in my own system.
I have checked many posts and i have done some JCO destinations as per the instructions but it's vain.
The detailed error is as follows;
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(CharRelInst): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.ip.bi.plan.workbench.wdp.InternalInfoprovController.wdGetCharRelInstInterface(InternalInfoprovController.java:296)
at com.sap.ip.bi.plan.workbench.InfoprovController.checkSavable(InfoprovController.java:254)
... 48 more
please give some pointers like what needs to be done JCO settings in Backend.
Thanks in advance.Niranjan,
3 causes and many more....
First and most probable cause is that your CR content in SLD is old....
FIX - to fix this download latest cimsap and crcontent from service.sap.com and implement in SLD.
Second cause user is locked
FIX - unlock in R/3
Third cause could be that the connection pool in JCO is exhausted.
FIX - increase connection pool in JCO.
More causes.
With this new version it appears that any error before connection is created ends up showing this, so I would really go into default trace and look there for original errors, that is the way I found JCO pool was exhausted, that error was not being forwarded and instead it was showing this error...
reward points if helpful
Maybe you are looking for
-
SRM 5.0 how to change screen label
Hi, Expert here is a requirement to change the screen label'E-mail' in SRM, after checking, i find the source coding as bellow '<input type="radio" name="GV_MEDIUM" id="medium_mail" value="MAI" > <label for="medium_mail">E-Mail</label> ' , i
-
Hi, Guys Is there anybody know what is difference between pro's led display and air's? why air's looks brighter than pro's? since apple upgraded pro on Tuesday, is it going to get exactly same display as air's? Thanks
-
Any way to clear search history in maps ?
I'm new to IOS but wondering how can I clear search history in the new IOS maps application. Thanks@
-
Screen resolution with Mode in BDC
Hi All, In call transaction statement I am using mode as well as options from statement but 1 error is coming that i can't use mode and update with options from statement. But I want to run in background as mode 'N' as well as I want the default scre
-
Hi, I have a very large project that I need to have text highlight in sync with the audio. Does anyone know of a simple way to do this? Are there features in Final cut Pro Live type motion or other software that will allow me to do this? Or, am stuck