Disconnect while do not disconnect was there
my roommate disconnected my iPod nano without knowing to hit eject on iTunes and all the screen says no is www.apple.com/support/ipod with a folder and i cannot get it to go away. my windows explorer recognizes there is a drive, but will not let me access it, the updater and iTunes doesnt know its connected either.
any ideas?
thanks
Windows XP
Try the troubleshooting steps here iPod displays folder and exclamation mark and here iPod shows up in Windows but not iTunes
Similar Messages
-
We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.Hotfix Released here:
http://support.microsoft.com/kb/2916846 -
Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
After a Installation from Windows 8.1/windows 7 everything works fine. For example Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
Hosts are not in a domain configuration. I tried it too but there was no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
Is there a bug or something. I tried it many times with the same error.
Maybe someone can help me.
kind regards
TobiHi Tobi,
Thank you for posting in Windows Server Forum.
For a workaround, please try to perform the two steps.
1. Do NOT enable RDP 8 on the Windows 7 SP1 VM. You should install RDP 8 and update the ICs though.
2. Change the connection setting on the client from "Automatically detect" to "LAN"
Please check again below thread for information.
a. "The remote session was disconnected
because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
(Please recheck answer by “dgeddes”)
b. "The remote session
was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
Hope it helps!
Thanks,
Dharmesh -
Hi,
I am getting this error from windows server : remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator.
Remote desktop Session Host Server Configuration Details:
The RD licensing Diagnoser(WIN-909xxxxxxxxxxx):
Number of license available for clients : 0
Remote Desktop Session Host server version: Windows server 2012 R2
Active Directory Domain : Not applicable
Licensing mode : Not configured
Now, Down I am getting this error as well shown by the system:
RD licensing Diagnoser Information- 2 errors:
Win-909xxxxxxxxxx : licensing mode for the Remode Desktop Session Host Server is not configured.
Win-909xxxxxxxxxx : The grace period for the Remote Desktop Session Host server has Expired, but the RD Session Host server has not been configured with any license servers. connections to the RD Session Host server will be denied
unless a license server is configured for the RD Session Host server.
Now my kestion is :
Do I need to buy a license key of the windows server to not getting this error or it may continue appear even if I purchased the license and not configure RDS and AD.
Do I need to configured only RDS and AD and buy the license key of windows server later because I still have 55 day of trial.
Do I just buy the RDS client access license (L).
Please could you help on this, am new in windows server?Hi,
As the message indicates, the grace period for the Remote Desktop Session Host server has Expired, you need to purchase and install RDS CALs. Also, you need to configure related settings
to continue using Remote Desktop Services. Otherwise, you cannot connect to the server remotely.
References:
Understand the licensing grace period
http://technet.microsoft.com/en-us/library/hh553157(v=ws.10).aspx
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
Specify the Remote Desktop Licensing Mode on an RD Session Host Server
http://technet.microsoft.com/en-us/library/cc754487.aspx
Specify a License Server for an RD Session Host Server to Use
http://technet.microsoft.com/en-us/library/cc770585.aspx
Meanwhile,
1. AD is not required for RDS. However, it is recommended.
2. As you do not purchase Windows Server and related licenses as well, I suggest you contacting Microsoft sales or partner firstly.
How to buy Windows Server 2012 R2
http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx
Best Regards.
Jeremy Wu
TechNet Community Support -
I am the Server Administrator and have server 2012 Standard running on a single computer for our small (50 employee) company. It's primary role is to house one software application that manages our data. Our employees need to remotely access this
server to use this software program. For the last 4 months we have successfully done that using Remote Desktop.
Unfortunately our RDS trial period ran out on our Server, and so I have recently installed 21 RDS User CALs on to the server to still be able to access this server remotely. When I installed them, using the Install Wizard, I selected 'User CALs' as that
is what they are. However, when I try to use remote desktop and access the server remotely, I get the message: "remote session was disconnected because there are no remote desktop license servers available to provide a license"
Do I have to install the RDS User CALs as Device CALs instead even though they are USER CALs?? Did I forget to check a box or something? Please help! We are a Non-Profit and really can't afford Microsoft's $260 support fee when I have a feeling
this has got to be an easy solution.Hi,
1. Did you create an RDS deployment or just install the RD Session Host and RD Licensing Role Services on your server?
2. If yes to #1, have you set the licensing mode and licensing server name in Server Manager -- RDS -- Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab? Did you make your RDSH server part of a collection? The RDSH server must
be part of a collection in order for the deployment settings to apply.
3. If no to #1, then please set the licensing mode/specify the licensing server name via group policy setting. For example, you could use gpedit.msc and configure the following settings:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
Use the specified Remote Desktop licensing servers
Set the Remote Desktop licensing mode
Thanks.
-TP -
Hi,
I have been using Windows server 2012 at my company and generally take a remote access to this server. However, since last few days, I have been receiving the Error "The remote connection was disconnected because there are no Remote Desktop License
Servers available to provide a license. Please contact the server administrator".
My entire work has come to a halt because of this error as all my applications are running this server and their remote access is needed for my regular requirements.
I had tried one of the solutions proposed at one of these forums especially using gpedit.msc but to no avail.
Regards,
AdityaHi Aditya,
Thank you for posting in Windows Server Forum.
Agree with the words of armin, please verify that you have properly installed correctly. Verify RDS Licensing service running on License Server. Verify that the client, the RDS server, and the license server can communicate by ensuring that Domain Name System
(DNS) is configured correctly on each computer. You can run the ping command from each computer to each computer using the IP address, FQDN, and the NetBIOS name. If any of the ping commands fail, verify the DNS configuration on the network.
In addition, you can also try “GracePeriod” registry setting on this path (HKLM\System\CurrentControlSet\Control\Terminal Server\RCM) from
this article.
Hope it helps!
Thanks.
Dharmesh Solanki -
TS3274 MINE SAY'S "COULD NOT SIGN IN - THERE WAS A PROBLEM CONNECTING TO THE SERVER".
MINE SAY'S "COULD NOT SIGN IN - THERE WAS A PROBLEM CONNECTING TO THE SERVER".
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
HT4623 My Iphone will not start. There was an error in updating. Is anyone else having this issue
My Iphone will not start. There was an error in updating. Is anyone else having this issue
After connecting to iTunes, I noticed that "Back up to iCloud" was selected (in the middle of the screen on the "Summary" tab, under "Backup"), and "Last backed up to iCloud" reflected the time that I attempted to back up from my phone. Even now, the phone still says "Last Backup: Never," so there is clearly a disconnect. Hopefully Apple will fix this soon.
-
Tcode P2W2 Does not exist in ECC 6.0 but was there in version 4.6c.
Hello Friends,
The Tcode P2W2 does not exist in sap version ECC 6.0 but was there in 4.6C.
So how can i know if there is a new transaction for this provided by SAP or they have removed it as this is a standard tcode.
In 4.6c the tcode p2w2 was calling the standard transaction sm29 with some default values. sm29 is persent in the new version.
also if possible please tell what can be the reason we have the tcode p2w2 with some value in tcode sm29 in 4.6c.
Regards,
Vidya.Thanks for your help.
Infact i checked it earlier also in the TSTC table the tcode p2w2 is not existing in new version while it is persent in the older version. I could make zp2w2 and i also gave the default value for sm29 and its working, but the problem is as it was a sap standard transaction so all the end user needs to be informed about the change in tcode to zp2w2 from p2w2 . This will be difficult so i want to make sure there is no other standard transaction before asking the user to use zp2w2.
Regards, -
Someone reset my iPhone and it was not me is there a way to find out how they were able to access my info?
There are two ways to reset an iPhone, 1) the user actually using the iphone can perform a reset from Settings, and 2) a user to knows the iphone's iCloud ID and password and do a remote reset.
I'm assuming you didn't personally reset it while on the iPhone, so my question is ... does anyone else know your iCloud ID and password? Have you set up multiple devices (perhaps belonging to other members of your family - something you generally shouldn't do, if you don't want to sync the same data to all devices in the family) and used the same iCloud ID on all of them? Perhaps a family member or a "friend" of a member used Find My iPhone to locate yours and remote wiped it. -
my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad
my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad
-
With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.
Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?
-
hi, i created and bought a 74 pages book on iPhoto that costs me around 96 euros. It was delivered with a all 2 pages badly printed. It is not acceptable that there is no quality control at this level of price.I am very disappointed and won't buy again!!!
except this major point i must admit the quality is quite good , but a bick lack of quality control and a customer disapointed at the end.
On the internet site it is not possible to send it back. So apple doesn't want to take in account that they mail sometimes fail, and want to satisfy their customer, because you have no other choice that accepting it.
best regardsYes it is returnable.
http://store.apple.com/us/help/returns_refund
That's for the US, there's a similar one for your country. -
Hi,
I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
When I login to owa for user test1 and preview the attachment it works fine.
However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
" An error occurred while the document preview was being created. Please try again later " as follows
I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Does the error appear when you directly access test 2 mailbox through OWA?
2. Check if there is 141 error in your event log.
3. Check whether Office web app server connects with Exchange server when the issue happens.
Access the URL: https://hostname/hosting/discovery
4. Grant full access permission again and check the result.
For more information about Office web app integration with Exchange, please refer to the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support
Maybe you are looking for
-
MacBook Pro's wireless connectivity with ZTE 531 ADSL modem using BSNL broadband
I have tried to connect macbook pro with BSNL broadband internet connection using ZTE 531 ADSL modem. The connection using both wireless mode and ethernet mode failed repeatedly. Using the same modem, I am able to connect to internet through my Sony
-
Hello, im planing on getting a new mac pro. I would like to connect my current (PM G5) and the new computer wirelessly. How would i connect my power mac g5 to wireless internet and printing if it doesn't have an airport card?
-
Post invoice with 1p or 2p difference
Dear Experts, I need to post the invoice even if the balance with difference untill 2p. Can you please guide me how to do the same. If this post is in the wrong place,please guide me where to post the same. Thanks, RR.
-
Crop image with a 10px radius corner
I'm doing a very good Dreamweaver course but it's sometimes a little scant on the PS instructions. The first instruction is .. "Make a 10 pixel selection as shown in figure 2 - it needs to be a perfect selection, exactly on the top left corner of th
-
[SOLVED] AMD Microcode update failed (on Xen host)
I have an Arch system running as a VM Host based on Xen 4.4.1 It is yet unclear to me why the VMHost (Dom0) cannot update the CPU microcode of the AMD Opteron 3365. The following errors appear. [ 9.664531] microcode: CPU0: patch_level=0x0600081c [ 9.