Disconnect wireless users when they leave the building

Hi!
I wanted to know is  there any functionality or solution that drops wi-fi users automatically when they leave permitted area, for example when they go out of the shop? This is for restriction of unwanted connections from outside the building to guest wi-fi.
Best wishes, Zhomart

You would have to really survey the area to see where the access points can be placed and then what power should they be. The issue you will face is that the 5ghz attenuate's faster than the 2.4ghz so this might be tricky. Your coverage toward the exterior walls will be poor for your users and that's not a good thing. All you really can do is buy window film that blocks rf and or paint that blocks rf. This will also affect your cellular, etc.
Sent from Cisco Technical Support iPhone App

Similar Messages

  • HT201441 Hi, what if I don't know who had the device before.. I am working in a company, where we have a huge amount of iPhones and people come and go. When they leave the company, they turn in there phone after it has been erased and then that is it.

    Now I have a stack of Iphones that I can't use and I don't have a track record of who had them.??
    From a company point of view, it is not very smooth.

    If you haven't kept records of who had what phone, or required the user to wipe the phone properly before returning it (maybe time to update your company policies), you'll have to contact Apple Support directly and provide proof of ownership for these devices.
    Although there is no published process for getting devices unlocked, there have been reports that Apple can unlock corporate owned devices in situations such as yours, when device ownership is able to be proved.
    In future, when someone returns a phone, make sure they go to Settings > General > Reset > Erase all content and settings and enter their password for the process to complete. Then you'll have no problems.

  • Scripts for changing the address of the user when they have been in the box for 6 months

    Scripts for changing the address of the user when they have been in the box for 6 months
    If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old 
    Anyone have suggestions on how I can go about it?

    What is this "box"?  What is this "folder" you're asking about?  You'll likely get a better answer if you use standard terminology.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? Iwas told it will wipe when a new user opens the device.

    If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? I  was told it will wipe when a new user opens the device.

    No, it will wipe it when they try to connect it to a computer and set it up under their own Apple ID. When they turn on the device the first time without connecting it to anything they will be able to see the video.

  • I am unable to update an app, Chirps! USA. I have tried both wireless and when connected to the computer. I contacted the company and they said it was an iTunes problem. ANy suggestions?

    I am unable to update an app, Chirps! USA. I have tried both wireless and when connected to the computer. I contacted the company and they said it was an iTunes problem. ANy suggestions?

    Hi..
    Delete the app then reinstall.
    Hold the app icon down until all the apps jiggle then tap the x then tap Delete. Press the Home button once or twice to stop the jiggling.
    Then go to the iTunes store and re download the app.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    That should download the most recent version including whatever update was available.
    You won't be charged again.

  • Dealing with Person column when someone leaves the organization?

    We have a list which has a person (people picker) column.  This column pulls from (is validated against) several possible sources including Active Directory.  If a name cannot be found when adding/updating a record then the following error message
    appears in red just below that field:
    > No exact match was found. Click the item(s) that did not resolve for more options.
    We have a particular record we are trying to update.  Per security policy former employees *must* be deleted from AD.  Now, however, that the person in the person column of this record has left it is impossible to update his record due to the mentioned
    error message.  His name won't validate even though he still exists in the User Information List.
    How can this be overcome?  Is it a configuration issue?  It must be possible to update the record of a person who has been deleted from AD; otherwise, this would present major issues to organizations.  We are considering using text for person
    names instead of system-validated person columns and clearly that would not be Microsoft's intent.
    Question originally posted on: 
    http://sharepoint.stackexchange.com/questions/103803/dealing-with-person-column-when-someone-leaves-the-organization/103949#103949
    The given answer indicates an issue with our security policy, but I'm told our policy of deleting (not disabling) AD accounts is fairly standard in the industry.  Is Sharepoint not properly equipped to deal with deleted AD accounts?  If so, it
    would seem to render the people picker useless.

    I would agree, this is an issue with the security policy (simply disabling users is also quite common, e.g. in case they return to the organization you can simply reactivate their account). But are you also removing the person from the User Information
    List within SharePoint?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Why my screen is keeping black screen when i leave the mac book with few hr

    when i leave the mac book pro on a few hours, it kept black screen. i try to press any key and open button, it kept no response. after 3 mins, i press open button again. the mac book appear off. so i press the open button again , it open.
    do i need to change a new mac book pro in this situation? because this is my new computer, i can change a new one within 10 days.
    plz give me some suggestion, thank you!!!

    In actual fact this seems a bigger problem than I thought. Linking the two computers via the Thundernolt cable and selecting cmd F2 no longer shares the screen at all and Apple say it may not be able too in Mointain Lion - What are they playing at, hundreds of customers link computers together and share the screens - Lets hope they are wrong and tell us what we need to do other than move back to Windows.

  • How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
    Thank you very much!
    Regarding the Alarmed app, doesn't it have to be running to actually remind you?
    -Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
    I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
    Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
    I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

  • Why does my iphone loss WIFI connection when I leave the room? When other mobile devices stay connected?

    Why does my IPhone loss WIFI connection when I leave the room? When other mobile devices stay connected?
    I can not send text messages to other IPhones if I do not have wifi or 3G on, the texts are sent as emails.

    Hey Linders1987,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with Wi-Fi on your iPhone 5. The following resource may provide a solution:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    http://support.apple.com/en-us/TS1398
    Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including
    - previously connected Wi-Fi networks and passwords
    - recently used Bluetooth accessories
    - VPN and APN settings
    Thanks,
    Matt M.

  • Skype bugs out when someone leaves the call in gro...

    Hi all,
    Lately everybody in our groupchat has been having issues when someone leaves the call.
    When they leave, it looks like the whole call has been disbanded, but the people that didn't leave can't see the call. 
    Which concludes to: Nobody can leave the call, we have to exit skype completely and relog.
    Does anyone else have this issue and does someone know how to fix this?
    Thanks
    - Marvin
    EDIT: When this happends, we can go into another call while being in the groupschat call.

    It is a bug and there is no fix as of yet, other than loading another OS (downgrading.)
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app?  When I leave the car and return to continue hearing a book, it has switched to iTunes.

    How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app?  When I leave the car and return to continue hearing a book, it has switched to iTunes.

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • My form was created by FormsCentral.  I save as a PDF and emailed it to all of my club members.  When they complete the form, save it, and email it back to me, I get a blank form. Why?

    My form was created by FormsCentral.  I save as a PDF and emailed it to all of my club members.  When they complete the form, save it, and email it back to me, I get a blank form. Why?

    If you had iCloud backup turned on, and it made a backup - yes.  If you didn't have iCloud backup turned on - but were using iCloud for Contacts, calendars, etc.  You will get the contacts and calendars, etc back.
    Purchases made with your appleID can be redownloaded as long as they are still available in the iTunes store.
    If you connected your phone to a computer with iTunes, there may be a backup on there as well.

  • At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

    At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

    Hello Sam,
    strangely enough, it went away by itself, and until now, it did not come back. I also believe it must be soms sort of graphic card connection failure or something like that, it`s very strange though. I also did let it know to the apple store, and explained it, and they were willing to repair it, but now everything is ok, so it has no meaning to go to the apple store, maybe for a checkup, that would be interesting maybe.
    So, I would suggest to keep on using your computer for a couple of days, and shut it down and restart it as often as possible. And when it has not dissapeared after 3 or 4 days, then it`s good I think to go to the apple store.
    If you can post here how it goes or how it went, would be nice, and if there is anything more I can help you with, let me know, kindly, Steven

  • Hello, I have a Toshiba netbook with i-tunes loaded, when I go into import settings and choose MP3,instead of AAC, it defaults back to AAC when I leave the diaglogue box.

    Hello, I have a Toshiba Netbook that I just put i-tunes on and when I go into import settings, I want to change it to MP3, but when I leave the dialogue box, it defaults back to AAC. What am I missing?   Thanks.

    I wonder if I'm missing that OK because the screen on this netbook is smaller  than a laptop and only supports 1024 X 600. I can't scroll that box up any, and can't grab the top and move it up. So when I exit that box I have to click the x in the top right corner.
    Acck. Yes, that'll be the issue. There's an OK and a Cancel down at the bottom of the screen.
    This is going to seem a weird suggestion, but it's the only thing that is springing to mind at the moment ... Do you know someone with an external monitor, or a TV that supports PC input? If so, try temporarily attaching the netbook to that. Can you do the preference change on the larger monitor?

  • I'm trying to share a web page from safari by email but the recipient only sees a ? when they receive the email any suggestions why?

    I'm trying to share a web page from safari by email but the recipient only sees a ? when they receive the email any suggestions why?

    Ok..   see if emptying the Safari cache helps.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari and try sharing a webpage.

Maybe you are looking for

  • Not able to get the taxonomy field value of meta data field type

    Hi Everyone, Not able to get the taxonomy filed value from the metadata filed type. Any one can help me on this. Label, TermGuid, ValidatedString are showing empty when i debug the code. Below is the code which i used to get the taxonomy filed value

  • Problems setting up Verizon DSL (DHCP) and AirPort Extreme

    I have Verizon DSL with DHCP and old router (Linksys WRT54G). I've bought iMac and new router (AirPort Extreme) to connect to iMac wirelessly. I have a Windows computer connected to the Linksys WRT54G. Now here is the story. I can connect verizon DSL

  • One of the APD Process Chains fails.

    Hi All, I have created two different process chain (PC1 and PC2 for example)which use program RSAN_PROCESS_EXECUTE  to execute the two diiferent APD (APD1 and APD2 for example) . PC1/PC2 executes APD1/APD2 respectively.Both the process chain have the

  • Regarding selection view in ldb KDF

    Hello All, In logical db KDF when i go to selection view i can see three function groups ie vendor master companycode and documents with their respective ids. But when i execute report related with this logical database like tcode f.42 adn fbl1n i ca

  • My iPad Sleep/Wake button not working after upgrading to IOS 4.2.1

    Since I uploading the OS system onto my iPad 3G, the Sleep/Wake button is inoperate. When I click this button, my iPad will not turn on (I press the Home button to activate my iPad). When my iPad is on and I press the Sleep/Wake button nothing happen