Disconnected ipod when said DO NOT DISCONNECT, now its not working.  help?

I was in a rush and I disconnected the ipod from the dock (which is connected to the computer via the USB cord) even though the ipod had the red circle with the line through it saying “DO NOT DISCONNECT”. When I tried to use it afterwards, the screen was frozen with the “DO NOT DISCONNECT” screen blinking. I couldn’t even turn the ipod off. The battery ran out, and the ipod did eventually shut off a few hours later. When I then plugged it in to the roadtrip in my car to try and recharge it, the black and white apple screen appeared for a few seconds, then a screen with a sad ipod face and an exclamation point appeared with www.apple.com/support/ipod underneath it.
When I got home, I plugged the ipod into the dock again, but itunes did not recognize that the ipod was plugged it. But when it was plugged into the dock, on the ipod screen there was a picture of a battery with a lightning bolt on the left side of it and a small part of the left side of the battery was filled in black. It did not blink or anything.
I read online a few things I could try and I did try resetting the ipod, but it didn’t work, it just showed the black and white apple, then the www.apple.com/support/ipod screen. I even tried pressing the Select and Play button, and nothing happened. I also uninstalled/reinstalled itunes, but that didn't work. and since itunes won't recognize that the ipod is plugged in, i don't know what else to do.
My computer does not even recognize that the ipod is plugged in either since nothing shows under “My Computer” regarding the ipod.
hopefully, someone can help. if not, what do i do? can i send it in? if so how long does that take and how much does that cost?
i'm kicking myself now for being so stupid!
Jen
iPod Photo 60 GB   Windows XP  

I had this same problem but it ended up that my computer wouldnt do anything with my ipod. Load songs or anyhitng. I had to go next door to my neighbors and use there computer. Try it on another computer and if it still deosnt work try calling apple.

Similar Messages

  • IPOD VIDEO 30GP IS NOT WORKING HELP PLEASE :(

    ok ill tell the whole history i bought an ipod 30 gb when i got home with my ipod i plug it to my pc and my pc never detected it (I installed itunes before plug my ipod) and itunes detected either so next day i went to macshore where i bought it they took it and puted it on a idock then my ipod started and charged for 20 mins and the guy of macshore didnt know what to tell me why my ipod didnt work in home and my wiere is not the problem cuz it works fine with my brother's ipod nano
    please if anyone can tell me what to do ill apreciate for life

    You might want to make sure that iTunes 7 was
    properly installed, (Help > About iTunes) and that
    your computer does have USB 2.0 ports.
    Older USB ports on the computer can make it really
    difficult for the iPod to make a connection.
    Is the iPod displaying the Do Not Disconnect screen,
    when it is plugged in?
    how can you check to see if ports are older

  • IPod touch wi-fi not working, help?

    My iPod touch's wi-fi is not working after updating with iOS 6, and I'm not sure what to do. I click on my wi-fi name and it puts the blue check mark next to it but then when the sign in page pops up, the actual bar for me to enter the password isn't there. It's literally just a white page. Help?

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Is this the problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
      Apple Retail Store - Genius Bar

  • Hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has

    hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me  ?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • How do I unlock ipod when it is not being recognized by computer and itunes

    How do I unlock ipod when it is not being recognized by computer and itunes?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I lost my ipod, when i track it it says its off. what do i do now?

    i lost my ipod, when i track it it says its off. what do i do now?

    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668

  • SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    Please turn off your caps lock.
    See http://support.apple.com/kb/HT1212.

  • The Wi-Fi on My iPod Touch 4G is Not Working (See Description)

    The Wi-Fi on my iPod Touch 4G is not working. People were working on my wi-fi, and, since it showed three bars still, I thought it was working. So when I found out it wasn't working, I tried to fix it by myself by forgetting the wi-fi network. Now, when I try to log in, it says that my password is incorrect (even though I know it is right). I think it is not working because I forgot the wi-fi network while they were working on it. I don't know what to do and I would like Wi-Fi to work on my iPod again (and it is working on my computers and my iPad). Can anyone help me? Thanks:)

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Playbook requires me to pay for support when it did not work from the beginning and they could not fix.

    lack of email app- makes this may purchase virtually useless. because
    cant bridge with my bb 9700. maybe twice after deleting from both, and rebridging, i got connections. i cant spend an hour bridging every time. since may this is unfixable. the support people cant fix it after dozens of hours. got lots.of emails from them though. asking if i was resolved. when i answered no, they asked me to do it all again. they have no fix for this.
    can type documents, but cant email them to anybody. same with excel. no way to attach documents when the bridge doesnt work.
    i am a ceo,and i am moving my entire organization off bb becuase of this.
    have spent many many hours from the beginning in may, and now they want me to pay a 129 dollar fee to get support when it has not worked right from the beginning.
    i bought an ipad today and i am absolutely blown away by how much better it is in every single way. dozens of bbs are going away now.
    slow, no.email, locks up all the time, stand by button restarts tablet, no bridging without total reload on both devices. why would i go through this anymore? it is costing my business a fortune with myself and my people trying to make the playbook work.
    we will get ipads and make more money.
    i have tried to stay loyal to bb, but after being told i have to pay for support
    when i did once get a connection through bridge, reply locked up everytime on an email. could not type.

    I would like to add my support to this comment.
    Strike 1) Bridging a BB 9700 with a PB is flaky at best. Even if you run the very latest software on both, it does not work properly. This is NOT a user issue but a programme/application issue. RIM software running on RIM hardware and O/S and NOT being able to connect properly = RIM fault.(see my other post: My Bridge connects, it exchanges data like passwords, number of unread emails and my playbook notifies me when someone calls my BB, but it does NOT unlock)
    Strike 2) All this used to work fine during the 90d grace suport period (apart from the flaky bluetooth issue that required a hard reboot of the BB whenever the connection was broken in a bad way)
    Strike 3) Now, after a PB OS upgrade (which I faithfully applied), several phone upgrades (due to another problem) and the latest Bridge application install, it all doesn't work anymore, 100 days after I bought the flipping thing. so I have a fancy ebook reader, not the productivity enhancing tool I can use on the go.
    So now I am stuck with a forum that can't help, a technical database that does not contain this support information and a broken RIM application on RIM Hardware and O/S that I paid a lot of money for. And now they want more to look at this incident????? I am sorry but if this was a problem caused by usage, configuration or any other user error, I could understand it. But this is all completely in RIMs ballpark. I have done everything right. It connects. It just DOES NOT WORK!!!!!
    As I said in my other post, an evaluation of the PB in my company is ongoing as a possible management tool by people I know quite well, as I work in the area, but my advice would definitely be to stay away until basic functionality like emails, attachments, calendars etcetera are all suitably solved and usable by the average manager with sausage fingers and no clue about bluetooth, hard reboots and who won't be able to hold down the power, + & - buttons at the same time as the fingers won't fit!!
    So RIM, get your finger out, open up an email support channel or get some qualified support people go through this forum and help those people who have shown faith in your products and who now have real problems with your software and hardware. DONT HIDE BEHIND A STUPID SUPPORT FEE - MAN UP TO YOUR PROBLEMS!!!

  • Hide mouse cursor when typing is not working in IE11 Windows7

    Hide mouse cursor when typing is not working in IE11 Windows7 - I saw a post that devs were looking at this in 2011? Slow progress huh?
    This is really annoying when you have to move the cursor to see what you are typing...

    Hi,
    Please first make sure that Mouse Properties\Pointer options\Hide pointer while typing is ticked.
    If this option is already ticked, then try following steps to troubleshoot:
    Update the driver for the mouse to get the best performance.
    Choose a different cursor as Rob said for a test.
    If this issue occurred recently, check if you have any newly installed programs or IE add-ons which cause this issue, you can test this in no add-ons mode, click start button, type "internet" in the search box, choose "internet explorer (No add-on)".
    * I test in My IE, I have Hide pointer while typing checked, and in some typing boxes in IE the cursor will hide automatically, while some are not, but I think it's not an annoying issue for me.*
    Regard
    Yolanda
    TechNet Community Support

  • My IPOD classic headport is not working properly.  The sound is going in and out?

    My ipod classic headport is not working properly.  The sound keeps going in and out.  I have tried changing headphones and checking the settings.  Does anyone have any ideas?

    Do a Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

  • TS1702 I downloaded a pokédex app on my iPod touch, on that app you can buy other region Pokemon, I bought a region but I won't download on my iPod, it said I purchased it but nothing will download, help?

    I downloaded a pokédex app on my iPod touch, on that app you can buy other region Pokemon, I bought a region but I won't download on my iPod, it said I purchased it but nothing will download, help?

    What happens when you try to download it?
    have yo contacted the developer of the app?
    Last, contact iTunes
    Apple - Support - iTunes - Contact Us

  • TS3572 My 4th gen ipod shuffle is either not working or dead...

    My 4th gen ipod shuffle is either not working or dead, i have opened it and found that its black near audio pin is injected and its heating while connecting via usb to laptop neeeeeeeeeeeeeeed help any one...............................
    i think its kind of short circuited is any thing workable in this device or not........

    I solved my problem by restoring the shuffle to factory settings on the summary screen. Now it seems to work the way it's supposed to. Many thanks to Apple for zero help, as usual. Apple should direct less resources to developing the next snazzy ipad and more to cleaning up and enhancing itunes. I'll make the same editorial comment about the iphone 4 voicemail options.

Maybe you are looking for

  • A better way to deal with lost hyperlinks when converting Robohelp to Printed doc?

    I have inherited a 750-page manual that is "single-sourced" in RoboHelp X5. When I generate printed documentation, all of my hyperlinks and converted to plain text. Everytime we release a new version of the manual with any changes, we have to re-gene

  • Getting error while try to send data to matmas05 idoc

    hello frnds, i m working on a scenario in which i m sending data from xml file to matmas05 idoc of R/3. here i have done all the required XI settings. at sender side i have used file adapter and at reciever side IDOC Adapter. while i m executing my s

  • OraOLEDB, ADO and CursorLocation in VB6

    Hi, I'm returning to the Oracle World after 8 years, I'm taking control of a legacy VB6 application with data in Oracle 8i, the connection is made using OraOleDB. I remember something about some restrictions in the CursorLocation options. The applica

  • HUGE Photo Library with only 66 photos

    Hello, I have only 66 photos in my all photos from Camera. However, when I go to manage storage, my Photo Library is 1.5 GB. I tried multiple options by connecting to iTunes and such. When connected to iTunes, the storage meter shows as 1.5 GB 650 Ph

  • Error 150:30 when launching. Can't fix the issue

    Migrated PS4 to a new iMac running Yosemite. When launching PS receive an error message 150:30.  Discarded Flexfolder from the library preferences file. That file no long exists, but the 150:30 error continues. Anyone have any suggestions?