Disconnecting usb cable from N70

Is there a knack to disconnecting the cable from the phone? When I try it seems to get stuck and I'm worried about causing damage by pulling

You could also try these steps before unplugging your usb cable from your pc:
1. click the safely remove hardware (green arrow pointing down) found on the right portion of the taskbar.
2. select the usb cable
3. then click stop (once you click stop, it informs you that you could now safely remove your usb cable from your pc.)
As for unhooking your N70 from the usb cable, the suggestion from previous messages is the best way which is by gently bending it downwards.
Hope this helps.

Similar Messages

Disconnecting USB cable from E51/notebook PC

I'm using PC Suite ver 7.1.18.0 with Windows XP Professional and connecting my E51 to the notebook PC via a DKE-2 USB cable. All functions work perfectly (at least those I want), but a previous version of PC Suite gave me the standard "Safely Remove USB Mass Storage Device" function on the Start Bar. Since updating PC Suite including the latest drivers, I no longer get this icon. The only way of disconnecting the phone from the PC is by just removing the cable and I have always been under the impression that this can damage the USB device. Is closing PC Suite before disconnecting sufficient to avoid damage to my phone?

You could also try these steps before unplugging your usb cable from your pc:
1. click the safely remove hardware (green arrow pointing down) found on the right portion of the taskbar.
2. select the usb cable
3. then click stop (once you click stop, it informs you that you could now safely remove your usb cable from your pc.)
As for unhooking your N70 from the usb cable, the suggestion from previous messages is the best way which is by gently bending it downwards.
Hope this helps.

I just bought an ipod touch 4th generation recently,found that it is very difficult to plug and unplug the USB cable from my ipod.Does anyone have this problem?

I just bought an ipod touch 4th generation recently, found that it is very difficult to plug and unplug the USB cable from my ipod. Does anyone have this problem?

Some of the Dock connector cables have very small buttons on the rounded adge of the plug, which need to be pushed in to release the plug from the iPod. Look at the picture below, do you notice the "button" on the white connector edge? There's one on the other edge too and they both need to be pressed in to release the "evil looking spike" sticking out of the grey edge.
The shorter plugs (that I've seen) do not have the release mechanism, the plug simply pulls out.

Do usb cables from older ipods work with the ipod touch?

I have several older OEM usb cables from older ipods, but they don't seem to want to fit into my new Touch. I don't want to break it. The body of the end that goes into the unit is smaller than the old ones. Have the plugs changed?

Never mind.I found the same question answered several other times. Thanks, folks!

TS2634 i got a blue usb cable from apple sale they had and now it doesnt work

i got a blue usb cable from a sale that apple was selling and 1 month later it wont work and its in good condition so i dont know does a plle have a blue usb cable

Take it back to where you purchased it and ask for a replacement or refund. You are not addressing Apple here. We are all just users like yourself.

TV display shows USB cable from apple tv and iTunes logo. Otherwise completely unresponsive! what can be done to revive apple tv?

TV display shows USB cable from apple tv and iTunes logo.
Otherwise completely unresponsive! what can be done to revive apple tv?

That is telling that the Apple TV is in recovery mode and needs to be restored. This is done by connecting to iTunes via micro USB.
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

System hangs up on plugging the USB cable from SCXI1600 into my PC

Hello there,
My PC hung up twice during installation on plugging the USB cable from SCXI1600 into my PC. I have installed Labview 7.1
followed by NI-DAQmx 7.4 drivers. I then plug in the cable into one of the USB ports and then switch the power on on the chassis,
SCXI-1000. My PC immediately goes into safe mode switches off and turns back on. I do not know why this has happened. It has worked
fine prior to this.

Morning!
I figured out why my system was switching to safe mode and shutting the moment I plugged in the USB cable from my SCXI-1600. That was the instruction coming in from Norton Anti-Virus which saw the power and data coming through the USB as a serious intrusion into the system and automatically shuts down even without asking me. I now need to know how to change the setting on the Anti-Virus to recognise SCXI as a client on my computer.
Thank you to anyone thinking about this prob.
Cheers.

W510 bootup when plug in a USB cable from a printer

I am not sure whether this is by design or a defect. When I plug in a USB cable (connected to a printer that is on), the machine boot up by itself. Does any one else have experienced this? Is this a concern?
Thanks,
Charles

It might be the "allow device to wake from standby" option. Eg. here's some info for a mouse, you could see what is set for your printer:
http://support.microsoft.com/kb/280108
W520 i7-2720QM | 32 GB RAM 1333 MHz | FHD 1920x1080 | Quadro 1000M | Windows 7 & Ubuntu 14.04
Crucial M500 480GB mSATA + 2 x 1 TB Hitachi Travelstar 7200 rpm | BIOS 1.38

Can I use the iPad power brick to plug a 'Y' USB cable from an external hard-drive to get enough USB power?

Hi,
I cannot power-on my iomega eGo using a regular USB cable and my iMac (2010 model). Since I have the wall USB brick charger of my iPad, I was mondering if I could plug a 'Y' USB cable in the following way:
- from the eGo, to the iMac and the last 'Y' connection to the brick to get the power.
Will this work?
Thanks

It sounds like you're going to end up squirting 2 amps of electricity into your iMac into a port which is supposed to supply power, not receive it. Very bad idea. Consider the word "fry".
From the specs for your drive: "Requires USB 3.0 port or ExpressCard™ or PCIe slot for best performance"
USB 3 ports supply nearly twice the power of USB 2 ports.

Why does my Macbook Pro Crash when I tether with USb cable from iphone 4?

Ok so I pay for the tethering thing for my iphone 4. And when i use bluetooth or wifi it works just fine. But when i connect my iphone to my macbook pro with the usb cable it completely crashes. Like the screen gets gray but sti see thru and it says to turn off my laptop by holding down the power button. and it has it on many languages. Whats up??? what can i do?
I have the MacBook Pro.15 in 2.2 ghz i7 4 gb ram, the high end 15 inch stardard the only diff is that it has hi res anti glare screen.
Plese guys if you have experiene this let me know what i can do.

I know I went to the apple store and they said it's not normal specially since it deletes some stuff. And they told me to make an appointment.

TS3274 can't disconnect power cable from iPad port cable

The iPad 3 comes with two cables. One has a USB port on one end for connecting the iPad to a computer. The other plugs into an outlet and the business end is a female USB port. So you have to connect the two cables in order to charge the iPad. However the cables then can't be pulled apart when I need to connect the iPad to my computer. Spent half an hour on it and made little progress.

Bruce, Don't understand why you are connecting two cables together to charge your Ipad. If you use the USB cable connecting the Ipad to your computer this will enable your ipad to be charged up whilst the computer is switch on. You should have received a mains plug adaptor which the USB cable plugs into and the other end into your Ipad to charge it up WITHOUT involving your computer at all as a 2nd option. Can't help you with the cables stuck together other than saying that they did apparently join together and therefore will come apart again with more effort. NickGS

Using Second USB cable from Cable modem to hook up to Internet

Hello,
Is this supposed to work? It appears there is no USB select in Location prefs.

If both your computers have wireless, you can connect one to the internet with the USB modem, then turn on your airport cards and select share internet via wireless in your sharing prefs (put on a password), and you can share your connection with anyone, although it will retard the speed of access.
Too easy, for sheezy......

Does the usb cable from the Zen Nano cause can

I read in the manual that in some states it is known to have elements that cause cancer is this true?, show I be worried?

Yep, it's some California law that all products or constituents listed as possibly causing cancer must have this warning. I'm not sure what it is that the cable has though... but God knows how many cables I'v touched in my lifetime! Although I don't remember eating any, just spaghetti

Unplugging the USB cable from the Handheld.

Everything has gone smooth. Synchronization a problem. But I cannot get the cable out of the handheld. I have pulled. pressed. pushed. It will not come out. Brand new and I don't want to break it. Is there a secret to getting the cable to disengage? Thanks for any help.
Post relates to: Tungsten E

ALMEYER,
There are no official Palm stores you can take your device to for help with your issue.
You may be able to go to a local best buy or a retailer that has a service dept. to see if they can help you with removing the cable. You can also check with a local computer store to see if they can help also.
You should be able to disengage the cable by using the method in the previous post.
Post relates to: Palm i705

USB Cable almost impossible to disconnect from 5th Gen iPod

My 80 Gig iPod arrived today. It is my first MP3 player and I am impressed by it. Operation seems to be quite easy. I , however have a problem. When I have completed charging/synching the iPod and have "ejected" it from iTunes, I have found it almost impossible to disconnect the cable from the iPod. It has taken me nearly an hour to disconnect it and I am afraid I will damage the iPod. I think I have already cracked the plastic on the connector. Is this unusual, or is there something I am not aware of? I did a search of the discussions and all I seem to come up with are questions regarding the "Do not disconnect" message. Thanks for any assistance you can give.
-- Dave
Dell Inspiron E1505 Windows XP

Thanks, Scout. I hope I will be able to exert enough pressure on it (I have some paralysis in my hands due to a genetic neuropathy).
-- Dave
PS: Tried it and I'm a happy camper now :))

Disconnecting usb cable from N70

Similar Messages

Maybe you are looking for