Discount synchronization integration flow in Order2Bill PIP

I like to get your help on this integration process. I couldn’t get much help from forum and implementation guide. Where can I see the DISCOUNT value in Siebel if BRM makes any discount on synchronized product. Or How I validate this integration process?
Thanks.

There is one typo in the description:
It should be JMSProducer instead of JMS Consumer in the problem decription. I have corrected it. Please see the corrected description below:
I need your help in understanding “how interfacing is happening between Siebel and AIA in Comm Pack” for an outbound flow from Siebel. I will take an example of Order Synchronization flow between Siebel and BRM through AIA.
Step 1: When the order is confirmed / approved in Siebel, an event is captured and Sales Order ABM XML message is generated and put it into a JMS queue.
I have few doubts in Step 1 only where I need your help :
- What is the type of JMS Queue ? Is it OJMS (JMS Interface to Oracle Database Streams Advanced Queueing (AQ)) or OracleAS JMS (native Java implementation that provides file-based persistence).
- How the data is put into the JMS Queue? Is it through the “ProcessSalesOrderSiebelJMSProducer” BPEL Service or through some other mechanism.
- If it is through “ProcessSalesOrderSiebelJMSConsumer” BPEL Service, does the Siebel call “ProcessSalesOrderSiebelJMSProducer” as a Web Service or is it through JCA Resource Adapter.
- Other thing is if it is through WebService Call (Invoking “ProcessSalesOrderSiebelJMSProducer” BPEL Service), then what if the SOA Server is down during the call ? This will mean that we have lost the data as we haven’t put in the queue yet. And I don’t think Order will be created / confirmed / approved in Siebel again. Also Siebel can directly invoke the “ProcessSalesOrderSiebelReqABCSImpl” BPEL Service directly rather the invoking JMS Producer if data has to be passed through webservice call.
Thanks,
Jeetan Madaan

Similar Messages

OTM 6.3 Integration Flow

Hi,
We are in a process of migrating from OTM 5.5 to OTM 6.3.1, would like to know the integration flow of a transmission.

Sounds like a good question for the Oracle Transportation Management forum.

Multiple integration flows for different business operations

Hi - I have following business requirement & need ur advice.
There are different business operations (read as INSERT/DELETE/QUERY) to performed on same business object (read as CUSTOMER). In order to develop these integration use case I can have following three approaches.
*1. Single Requestor ABCS & Single Provider ABCS -* Develop single integration flow & implement logic for the business operations in them. That means, Develop single Requestor ABCS for all business operations, which will call the EBS and again EBS would call same Provider ABCS. Both Requestor & Provider ABCS would implement business logic for all business operations required.
*2. Single Requestor ABCS & Multiple Provider ABCS -* In this case the flows for all business operations starts with single point service. That means, Develop single Requestor ABCS for all business operations, which will call the EBS and again EBS would call different Provider ABCS based on the business operations. The Requestor ABCS would implement business logic for all business operations required. There would be different ABCS service for different business operations.
*3. Multiple Requestor ABCS & Multiple Provider ABCS -* In this case the completely independent flows are to be developed for all business operations. Independent Requestor ABCS and independent Provider ABCS. Off course if there some common business logic for all or some business operations, those can be implemented as common service & can used across all independent flows for different business operations.
Please do suggest what approach would be best one to pick up. Or it is case to case basis. In case yes, please suggest the criteria on which the decision can be taken.
Thanks In Advance
Priyadarshi

Hi Pryadarshi,
AIA recommends having an ABCS for each Verb and Noun combination for a specific Business Process, i.e. CreateCustomerABCS and UpdateCustomerABCS. Therefore, #3 would be the preferred approach. This is to allow for maximum flexibility. However, you may have a process that demands to model the integration as #2.
The decision would depend on how the participating application services are modeled and the granularity of individual service call. For example, a ProcessCustomer invocation at the source end may call CreateCustomer provider service.
Regards
Rohit

How to create Integration Flow for SOAP to RFC scenario?

Hello Friends,
We have Single Stack SAP PO 7.3 EHP 1 SP08 AS Java in our environment. We have a scenario where a RFC needs to be made available as SOAP Web Service. So we are using SOAP Sender Adapter and RFC Receiver adapter. We want to build this scenario with NWDS (Eclipse). We have imported the RFC and created data types, message types, service interfaces etc. But we are facing trouble in creating the Integration flow.
Please let us know if we need to create only one integration flow or need to create two integration flows (one for request and one for response) and what all configuration would be needed in Business Component and Communication Channel.
A step by step guide would be highly appreciated.
Best Regards,
Shreyansh Shah

Hi Shreyansh,
Found these links for you. Have a look at them and go through them. They should help you.
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/95/8969b91d50439296dbd0a8ded93da7/content.htm
Understanding Integration Flow - Process Integration Tools (Eclipse-Based) - SAP Library
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/e4/c9be6beab94f0b932e3c67f50e0093/content.htm
Regards,
Jannus Botha

NEED OF WM - QM- PP integration flow

HI every one
Can any one will explain me mm-wm -qm - pp integration
i want when material will is taken mm to wm
101--902-917--- but here i want partial acceptance like 100 qty in migo and then 80 qty in UD then where the partial material will go as 80 will go to 922 .
and then with help of PCN we will take to bin
explain me the process of partial acceptance.
guide me in this regards as early as possible .
reply as early as possible .

Keshub,
When you carry out QA11, then the movement types are determined in IM first iteslf.
So for Q - UNR it is 321 &
for Q - Blocked it is 350
Now you make these decisions in QA11 stock posting screen and then save the documents and the system will determine the relevant WM movement types (if you have set the interface up ) and post the quants.
Now please note that in case you are making a partial lot usage decision ( some to ur, some to blocked and so on), then the auto TO functionality will not be carried out. Please refer to OSS note 965094.
You can set up your interface in LE-WM-Interfaces-Inventory management -Define movement types- Assign WM Movement Type References to IM Movement Types. Here you first assign your IM mvt to a ref WM mvt type.
Then in next step you can define the behaviour of your WM mvt type in LE-WM Interface to Inventory Management ( say you want to create a PCN or a direct TO creation and so forth ).
In the next step, you will have to specify what are the ref mvt types supposed to carry out the posting changes in LE-WM-Interfaces-Inventory management -Define movement types- Define posting changes.
You will have to define these new WM mvt types.
This will complete your flow.

Synchronize Process Flows

I need to synochronize few process flows using a OMB SCRIPT.
Can someone pls help me to get the OMBSYNOCHRONIZE command work for Process flows?
Do anyone know the Matching Strategy Values for Process flows? Couldn't get it working. The error i get
Eg.
OMBSYNCHRONIZE PROCESS_FLOW 'PF_GEO10' \
ACTIVITY 'IAR_BRDINT_DMIS_BRI_TIN1' \
TO PROCESS_FLOW 'PF_GEO10' ACTIVITY 'IAR_BRDINT_DMIS_BRI_TIN1' \
USE (SYNCHRONIZE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'INBOUND_ACTIVITY_MATCH
BYOBJECT_UOID')
PUB01804: The matching strategy INBOUND_ACTIVITY_MATCH_BY_OBJECT_UOID specified
is invalid for the source oracle.owb.processflow.Activity and target oracle.owb.
processflow.Activity.

.... found solution, use 'MATCH_BY_UOID' instead of 'INBOUND_ACTIVITY_MATCH_BY_OBJECT_UOID'

FA with IDM (integration) flow solution

hi all,
I just would like to share with you guys this post that is very helpful if you are looking to integrate your current IDM enterprise with Oracle FA(+IDM soultion inside of it):
http://thiagoleoncio.blogspot.com/2014/05/how-oracle-fusion-apps-works-with-idm.html
I hope this helps you on your own solution.
thx and have a great day,
Thiago Leoncio.

Hi vikas and Frank,
Do you have any information related on How to enable the webservices in the GRC 10 (does NWBC holds the key). if you have any information related to it please share it with me.
Thanks and regards,
keerthi

Regd SearchPayment integration in Siebel to Oracle BRM PIP

In the Siebel CRM Integration Pack for Oracle Communications Billing and Revenue Management: Agent Assisted Billing Care 2.5 there is a an integration flow called SearchPayment.
The EBS is given as CommunicationReceivedPaymentEBS and the operation is SearchPayment. However in the ReceivedPaymentEBS.wsdl there is no operation called SearchPayment. Can anyone please tell where this SearchPayment operation is present?

Hi Ramesh,
Please go through EAI volumes from Bookshelf. Focus should be on the Web Services piece.
regards,
Ramkumar

Integration Process flow

outbound
What info I should give, if I want to receive data from other microsoft systems for them to develop a webservice/ integration object?
anyone tell me basics of integration flow?

Let me know the steps how the siebel generates WSDL and things need to be taken care at dotnet side (for authentication) for
1. Outbound from Siebel
2. Inbound to Siebel

Unable to execute startscen.sh for AIA PIP Agent-Assisted Billing Care 2.4

Hi all.
I am executing the 'Sync Collections Actions Integration Flow' of 'Agent-Assisted Billing Care' PIP to transfer collections data.
I just install AIA 2.4 with ODI 10.1.3.5, BRM 7.4 and Siebel 8.1.1.
After executing the following command for the first time :
./startscen.sh SYNCCOLLECTIONACTION 001 GLOBAL -v=5
I obtain the following error :
java.lang.Exception: Error: No value to affect to this variable for DefDate:2009-06-12 16:09:30.0
DefN:null
DefV:null
IndStore:L
ITxtDefT:null
ITxtVar:null
SessNo:23200
VarDatatype:A
VarName:AIA_COLLECTIONS_PROJECT.AIA_HOME
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.execStdOrders(SnpSessTaskSqlV.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTaskTrt(SnpSessTaskSqlV.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask(SnpSessTaskSqlV.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.e.y(e.java)
at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
at oracle.odi.Agent.main(Agent.java)
I read the procedure from "Siebel CRM Integration Pack for Oracle Communications BRM: Agent-Assisted Billing Care 2.4 - Implementation Guide (E14801-01)".
Thanks,
Patricia.

Could you open the package which is above the scenario SYNCCOLLECTIONACTION.
If you open this package, it should contain a variable step (maybe several) which is named like your variable.
If you click on this step you should see in the General Tab a field Linked Object which can't be empty. Could you confirm it ?
At Right of this field you should see a Type ListBox. Try to find the variable step which contains as Type *"Refresh Variable"*, and then right click on this step and Execute this Step, it should execute a refresh on this variable.
After that try again to execute your scenario.

JMS adapter IBM MQ Server integration with SSL

Hello,
We have a integration between PI and IBM Websphere MQ,normally we can able to do this with JMS adapter.
But MQ Server side is using SSL and they will send us a certificate, so we need to communicate JMS and MQ queue and JMS does not support SSL directly.
i have done some searches in sdn but i can't find a good guide or explained solve.
i will be very appriciated for any help or idea about this issue.
Our PI system: SAP PI 7.1 EHP1
Integration flow like this;
ERP -> PI -> IBM MQ Queue (SSL),
IBM MQ Queue (SSL) -> PI -> ERP

Hi all,
We have integrated PI and IBM Websphere MQ with JMS adapter and this is working any problems.
Now we want apply the note 1869690
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3138363936393026
and securize the interface.
We have SAP PI 7.1 EHP 1 SP12 , it's possible aply this note? or we need to develop adapter module?
Can you help us?
Thanks and regards

Project Management for Primavera Integration

Dear All,
I hope someone completed primavera and 11i integration successfully using AIA PIP. can anyone clear that where Oracle Project management is required or an optional one to integrate with primavera , only oracle project costing and billing module is enough.
Barathidasan

Sachin,
Your information is really helpful, If I am not using Project Management then where to do the "Integration Related" Settings in Project Costing module to send data to primavera. Right now we have done Integration Related settings in Project Management module.
Barathidasan

Integration Process Config SAP Hana Cloud integration with SuccessFactors

Dear,
We are trying to connect SF with our SAP backend, I'm currently reading the following document: "Integration Add-On 3.0 for SAP ERP Human Capital and SF".
I'm fairly new to SAP so I have a few questions, since I didn't found the answer on the rest of the Community maybe this topic can serve to ask a few questions in my setup process.
(Questions are in Bold)
Question 1:
The document dictates: "Discover the packages for qualification data integration from the SAP HANA Cloud catalog. Once imported, please
configure them as per your requirements. The integration flows are shown in the following table."
I tried searching for the SAP HANA Cloud catalog but I didn't found where it is or what it is?
Question 2:
Where do you setup the connection between SF and SAP? And do you have to do more customizing in SF (where is this described)?
Thanks a lot for any information regarding this topic.
Kind regards
EDIT 1:
Any reading suggestions on this topic.

Hi Barry,
Both the links work for me. Can you please check if this issue for you is because of your login/authorization?
Regards,
Vasanth

Integration Scenario's utility in IR/ID ?? & Communication Channel

Hi All,
Please clear the following doubt about integration scenario and communication channel.
1. Is it necessary to create integration scenario in the IR(design) and then to import it in the ID(configuration) ?
Is it possible to create the integration scenario in the ID without even mentioning the same in the IR ?
2. During the design phase in the ID we get the option to create the communication channel tempelate, What is the purpose of it ? What if we create the communication channel in ID wihout using the IR option... ?
Thanks and Regards,
Mona

Hi,
Michal had already answered you questions to the point. I just thought of adding few words..
Integration Scenario basically helps you to define the integration flow and you can use the same during the configuration> Because of this Ur ID work will be simple. As Michal said this is not mandatory and you can goahead without a Integration Scenario.
For Eg:
You think of a development enviorinment that there different consultant for Design and Config. I mean the person who is designing will not be doing the config... In this kind of situation how come the config consultant knows which interface to use where... say for instance if you use BPM it really hard to understand it. So either he needs to have a clear documentation with the clear name before he could do the configuration. The integration scenarios helps a lot in this case... The config guy just have to give few parameters and click next, next and done.
Thanks,
Prakash

Flow measurement

I have a CompactDAQ with a NI 9201 voltage measurment module. I am using labview to program a VI to give me a flow rate for flow through a pipe. I have a flow meter that outputs a analog signal that pulses between -0.3 and 0.3 volts. The transition rate between the possitive and negative voltages corresponds to the flow rate. I can aquire the signal but I have not been able to convert it to a flow rate. I have tried different express VI's to measure the pulse duration but they keep returning errors saying that the signal doesn't pass the mid point enough times. Does anyone know of examples or have suggestions of how to do this?

Thank-you for your response to my Question. I attached a file showing the signal. I hope this clears it up a bit.
Attachments:
flowmeter signal.JPG ‏52 KB

Discount synchronization integration flow in Order2Bill PIP

Similar Messages

Maybe you are looking for