Discount ZD00 showing more than once

We have condition ZD00 to generate discounts, with a limit of 15% the problem its today one saleman simply put another line with the same code and SAP allow a discount of 23%.
If someone has tackled this please help.
Regards,
Carlos

Dear,
Please check: How to rescrict the user to enter a manual condition type once in pricing
Manul Condition type duplication control
Regards,
Syed Hussain.

Similar Messages

Facebook is showing more than once in the HUB !

Dear All,
I noticed that my Facebook is showing more than once in the HUB ! and everything instance of it is displaying something different than the other. Old instances are displaying old notifications that I have deleted a long time ago!
Each time a login and logout of the Facebook app, a new instance is created inside the HUB ! it seems that there is a serious bug in either the HUB or Facebook !!
How can I fix this ?
Yasser Youssef
Solved!
Go to Solution.

found the solution here:
http://forums.crackberry.com/blackberry-z10-f254/two-facebook-accounts-showing-hub-834878/
thanks FB developers !!!
Yasser Youssef

The same SMS messages are showing more than once

Hi,
On my SMS page, my message threads are showing up more than once ,
How would I go about fixing this?

Hello,
Maybe helps you:
*[http://kb.mozillazine.org/Repeatably_downloading_the_same_messages]

Header Discount getting copied more than once

Hi all,
I have a problem in Quotations in CRM-PCUI. We have renamed the pricing tab as 'Header Discounts'. If we try to copy quotaion, the header discount gets copied as many times as the number of products present for the quotaion, but on clicking save button all header discounts sum up and get consolidated into one. I want to know whether this is Standard SAP bahaviour and how can we change it? We want only consolidated total header discount to appear when we click copy quotation, and not on clicking save button.
I have assigned a Zclass to it and used some badis, but if i deactivate them and use standard class also, then also it behaves in the same way.
Any suggestions in this regard are highly appreciated.
Regads,
Rohit Khetarpal

Dear,
Please check: How to rescrict the user to enter a manual condition type once in pricing
Manul Condition type duplication control
Regards,
Syed Hussain.

ITunes keeps downloading the same TV shows more than once.

I have limited download capacity, so when one TV show completes, I need the next one to download, etc. If I stop for the day and start downloading the next day, the TV show that is already downloaded, starts downloading all over again, eating up my Fair Access limits. Any way to prevent this? I have iTunes 9.1 and OSX 10.6.3.
Thanks

Contact iTMS customer support and ask the to delete that culprit from your download queue.

When i put an app on m my iphone to show in lock screen it rings more than once

when i put an app on m my iphone to show in lock screen it rings more than once

When I go to settings/ notifications and select an app's notification and select on in the "view in lock screen* the msg tone rings more than once but when I turn it off it ring once.
What should I do to make the msg appears in lock screen but only notify me once

Albums Showing up more than Once

I have two albums that are showing up more than once, and the album is only on the i pod once, and it is only under the "album" section. I have already restored the i pod and re put every back on the i pod. Does anyone one know how to fix it?

Repeat albums are normally caused by minor spelling differences or the presence of guest artist information in the artist field. Select all the tracks of the album and get info (CTRL-I for Windows, OPTION-I for Mac). Check that you have values for all the fields you think should be the same across the album, particularly *Album Artist*, *Album Title* and, if no guest artists are listed, Artist. If you have guest artists you can either move this information into the track title, e.g. append *(Feat. Guest)* or change the *Sort Artist* of each affected track to the value of the *Album Artist*.
tt2

TS1292 How come it doesn't show the amount of money there is s gift card? I tried putting in the code more than once, but all it says is that the card has already benn redeemed?

How come it doesn't show how much money there is left in my iTunes gift card? I have tried putting in the code more than once, but all my tablet says is that the card has already been redeemed.

I haven't got access to the server right now (so I can't provide the complete details), but something like 6-700 GB (which is more than it shows in the client time machine windows, but less than what is true (which was around 1,5 TB))

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

How to show more than one report in a same Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

I once had a project which involved alot of reports and on my mind I had the same idea; to display all reports with only one crviewer but was not able to. Instead what Idid was to create say 10 forms with a viewer on each and if the user wanted to produce extra reports, they had to close some of them. This worked out for me.

Why would aperture load more than once?

I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?

1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Inbound interface was found more than once

Hi All,
Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
Can anyone help me out and provide some valuable suggestions.
Regards
Faisal

Hi Abdul,
Try to run the scenario in the ID.
There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
This will show you the error in the exact step.
-Supriya.

ORA-00604 & ORA-30512 CANNOT MODIFY TABLE MORE THAN ONCE IN A TRANSACTION

We have a requirement where two tables should be in sync at any given point
in time with respect to the structure of the tables.
Any change on table/column via ALTER (MODIFY, ADD, RENAME COLUMN, DROP
COLUMN) on the parent table should be replicated to the replica table.
I created a DDL_TRIGGER on the schema and the desired result is achieved but
for the following one scenario for which its failing.
The issue is, if we try to reduce the width of the column (via ALTER ..
MODIFY) it fails with the following error
ORA-00604: error occurred at recursive SQL level 1
ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
transaction
Please follow the steps to reproduce the issue (the issue is across the DB
version checked on 10.2, 11.1 and 11.2 DB version)
-- Step1 Create Parent Table
CREATE TABLE abc (col1 VARCHAR2(10))
-- Step2 Create Replica Table
CREATE TABLE replica_abc (col1 VARCHAR2(10))
-- Step3 Create DDL Trigger
CREATE OR REPLACE TRIGGER ddl_trigger
AFTER ALTER ON SCHEMA
DECLARE
operation VARCHAR2(30);
object_name VARCHAR2(30);
l_sqltext VARCHAR2(100);
i PLS_INTEGER;
l_count NUMBER:=0;
sql_text dbms_standard.ora_name_list_t;
BEGIN
i := dbms_standard.sql_txt(sql_text);
SELECT ora_sysevent, ora_dict_obj_name, UPPER(sql_text(i))
INTO operation, object_name, l_sqltext
FROM dual;
IF ora_dict_obj_name = 'ABC' THEN
l_count := INSTR(l_sqltext,'ADD CONSTRAINT',1,1);
l_count := l_count + INSTR(l_sqltext,'DISABLE',1,1);
l_count := l_count + INSTR(l_sqltext,'DROP CONSTRAINT',1,1);
l_count := l_count + INSTR(l_sqltext,'PRIMARY KEY',1,1);
l_count := l_count + INSTR(l_sqltext,'ADD CHECK',1,1);
IF (l_count = 0) THEN
l_count := INSTR(l_sqltext,'ADD',1,1);
l_count := l_count + INSTR(l_sqltext,'MODIFY',1,1);
l_count := l_count + INSTR(l_sqltext,'DROP COLUMN',1,1);
l_count := l_count + INSTR(l_sqltext,'RENAME
COLUMN',1,1);
IF (l_count >0) THEN
l_sqltext := REPLACE(l_sqltext,'TABLE ABC','TABLE REPLICA_ABC');
execute immediate l_sqltext;
END IF;
END IF;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE ;
END;
-- Step 4 Issue the following ALTER command on the Parent table 'ABC'
ALTER TABLE ABC MODIFY COL1 VARCHAR2(9);
will show the following
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
transaction
ORA-06512: at line 34
whereas the following commands works fine
ALTER TABLE ABC MODIFY COL1 VARCHAR2(11);
and also the rest of the operations
ALTER TABLE ABC ADD COL2 VARCHAR2(20);
ALTER TABLE ABC RENAME COLUMN COL2 TO COL3;
ALTER TABLE ABC DROP COLUMN COL3;
The issue is while reducing the size of VARCHAR2 columns, while the rest of
option works fine.
Any suggestion or workaround please.

It looks like a bug to me. The failing statement from the SQL trace is
PARSE ERROR #12:len=77 dep=3 uid=0 oct=3 lid=0 tim=1263332549608656 err=30512
select /*+ first_rows */ 1 from "TIM"."REPLICA_ABC" where LENGTHB("COL1") > 9and exception cannot explain it.

Document contains some order item more than once - invoice verification

Hi,
we have one cross company stock transfer process in which when a billing is created in SD side, an IDOC will be triggered automatically and create an invoice verification at the MM side.
The problem is some of our billing of this process having an IDOC application error that said.
Document contains same order item more than once
Message no. M8321
Diagnosis
Under the following circumstances, you can settle an order item in an invoice received via EDI more than once:
- Goods-receipt-based Invoice Verification has been defined for the order item.
- The IDoc contains the delivery note numbers of the goods receipts.
System Response
If this is not the case, the system cancels posting of the IDoc.
Question:
1 - The funny thing is IDOC showing 51 IDOC error code message on status record of INVOIC. But the invoice verfication get created in PO history.
2 - I think this error is because we need to make the PO as GR-based Inverifcation. We have flagged it in Vendor master, and Info record, but this indicator is not flag automatically in the PO (and we cannot manually change the PO as this indicator is grey-out). How?
3 - how to solve this error?
Thanks

Once PO history is created, you cannot change the "GR-based-IV" flag. Two options are there before you.
1. Cancel all the GRs & Invoices posted in the STO then system will allow you to update the GR-based-IV flag. After updating this flag repost the GRs and invoices.
2. Create a new STO, now since you have updated the vendor maser & info-record, this flag will automatically get updated during the STO creation itself.
First option is tedious and should be selected only if you can go option 2 is not at all feasible

Discount ZD00 showing more than once

Similar Messages

Maybe you are looking for