Discover 4i to 10.1.2

Hi,
We are upgrading from Oracle Discover 4i to 10.1.2; Was there any specific document available which says:
- What are main steps we need to follow where migrating from 4i to 10i
- What should we do
- What should not be
- New features available in 10i
- Any major steps/setup to be done
- Any other specific steps
Thanks
Uday

Hi,
Metalink Note 313418.1 should be your starting point.
Rod West

Similar Messages

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

HT1391 I have accidantally created anoth iTunes library file and ripped a lot of music in it. Than I discovered that this music was not arrived in one library file. Know I would like to merge all my music in one library file but don't see which library is

Hi,
Regarding my Itunes library:
I'll try to explain my situation (sorry for my english).
I have a networkdrive where all my music is stored on. Itunes is installed on my macbook and I entered the network drive as my media file location.
I use my macbook to rip music and buy itunes music assuming it will all be placed in the media folder that I once entered.
Recently I found out that itunes had changed the location of my media folder to the local drive.
Since a time now (I can't exactly say when) I'm ripping many of my music collection to itunes.
Today i discovered the change of my media file location by itunes after I ripped some collections. When clicking the info button on some of the ripped files I see that they are not stored on my networkdrive, very normal, since the location of the media file is changed to local computer.
When I look in the finder I can find a local libray file (xml file) from 13 april and also one on my network drive but the date is from March. So this one is even older.
I suppose that the libray file is updated each time I add a song in itunes. So there must be anonther library file somewhere?
Is there a way to see which libarary file is used in itunes? I know you can start Itunes with the option key to select another library file but is it also possible to view in itunes which library file is used so I can consult the path of the library file in use?
What should i do to put all the local music to to my network drive and update the correct library to the new location of these files?
Why is there no alert when Itunes changes the location of the media files path?
Thanks

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

How do I make my MacBook Air discover itself as a Bluetooth device?

My MacBook Air will discover and pair my iPhone and Touch, but it won't discover itself.

lindsay397 wrote:
I have a wireless printer and it has a CD to insert into the computer to connect it but i have a macbook air....and therefore no CD slot. what can i do? thanks!
This might help:
http://support.apple.com/kb/HT3500

My iPhone 5 won't discover my iPad or any other devices via Bluetooth. Has anyone else experienced this?

My iPhone 5 won't discover my iPad or any other devices via Bluetooth. Has anyone else experienced this?

You haven't said which generation iPad you have, but this article might help you regardless:
http://support.apple.com/kb/HT3647
I imagine Keynote Remote uses Audio/Video Remote Control Profile which should be available on both your iPhone and iPad.
I think you're saying that since you got the new iPhone 5, these two things occur:
1. Your iPhone cannot discover your iPad
2. Your iPad cannot discover your iPhone.
If that's true, when you turn on Bluetooth on each of the devices, you might see old devices listed that are no longer used. If you do, I suggest clicking the white arrow to the right of such devices and clicking "Forget this device".

SharePoint 2010 SP2 hosted on Windows 2012 R2 NOT discovered by SCOM 2012 R2 + 2 SP MP's

What is the process to get SharePoint 2010 Management Packs loaded in System Center 2012 R2 to discover/monitor SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2?
View of installed system:
System Center 2012 R2 loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
-Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007
-System Center 2012 Monitoring Pack for SharePoint 2010
SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
The SharePoint 2010 Management Shell works fine!
Result
Event 0, Operations Manager - Cannot identify which SharePoint farm server is associated with. Check the management pack guide for troubleshooting information.
Looked at these already:
KB2690744, Configuring the SharePoint 2010 Management Pack for System Center Operations Manager.
http://om2012.wordpress.com/2013/05/24/sharepoint-2010-mp-on-scom-2012/
Further, if the xml push does have the command get-farm instead of get-spfarm, that could be the issue. i.e.
http://www.scom2k7.com/advanced-troubleshooting-of-the-sharepoint-2010-mp/
Thanks,
+Tony
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

Peter,
I recommend to remove the Windows 2012 R2 server out of the farm and redeploy on W2008 R2.
This issue does not have an easy fix.
Summarizing, this appears to be the issue:
1. Windows Management Framework 3.0 is integrated with Windows 2012 R2, which installs .NET 4 and Powershell 4.0. Not uninstallable.
2. The Add-PSSnapin Microsoft.SharePoint.PowerShell is not supported with Powershell 4.0.
3. The SCOM SP2010 MP puts a package on the defined farm server and when the agent launches the package, it calls Powershell (v4 in theis case) and errors out. The target W2012 server will have an Error 0 in the Operations Manager Event log. See below.
Options:
1. Work around maybe - Develop method for manual discovery (I'm working on that now).
2. Rebuild SP2010 farm on Windows 2008 R2
3. System Center Team - Write a new MP to down version Powershell (Powershell.exe -Version 2)
4. Powershell Team - Write a SharePoint Snapin for Powershell 4
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

E72 unable to discover BH-216 headset?

Greetings!
I have just bought a Nokia E72 to replace my old Nokia 6120c. Now, the 6120c was a great phone, but lacking a full keyboard as well as WLAN and GPS made me go for the E72.
Now, I have a strange problem: The E72 is unable to discover my BH-216 BT headset, that was previously paired to the 6120c, and works perfectly with the old phone.
The E72 however is unable to even detect the BH-216, and I do not know why? I already deleted the pairing on my 6120c, but I don't think this has any effect? Do I need to do anything special to get this to work?
I'm puzzled by this problem...
Thanks!

Dammit.
Next time I should really read the freaking manual...
Obviously, the BH-216 stores its pariring. Switch BH-216 off, then back on (hold on/off button for 6 seconds until green LED starts to flash rapidly) => Device open for discovery and new pairing.
Haha.
My fault.

How to discover all available font styles for a given family?

I'm using InDesign CS3 and need to discover all of the available styles for any given font. I've found Application.Fonts.itemByName(), but this only returns a single font by the full name. Using ExtentScript in CS3 How can I ask for ALL font styles for any given font family (as displayed in the styles drop-down?)
Thanks!

hey,
I was just searching the web trying to find why this piece of code:
for (var i = 0; i <app.fonts.length;i++) {
app.fonts[i]..... some other code
take 4+ minutes to execute.
app.fonts.everyItem().getElements(); did the trick, sweet!!
However, I would like to ask you whether you know if there is some handout or some guide (possibly online page) for such advanced scripting...
or how did you find this solution?
thank you very much for this post, anyway
regards
jenda

I'm trying to connect a BlueTooth headset to my Mac Mini. I can discover it, but soon after discovery it disconnects. Can't figure out how to reconnect. My only option seems to be re-discovery

I can discover the headset, but soon after discovery it disconnects. Haven't been able to figure out how to try to re-connect. And the help section titled "Use BlueTooth has absolutely no information on how to use it. All I can do is re-discover it. Every time I rediscover it, it disconnects shortly afterward. This headset works well with both my iPhone and iPad and has for quite some time. But it won't stay connected to my Mac.

Tried with another headset that works fine with iPhone and iPad. An LG HBS700. Same problem. It connects for maybe 10 seconds and then disconnects. So it must be a problem on the Mac. But this Mini is out of warrentee so taking it into an Apple store to get it repaired isn't a good solution. Maybe as a last resort.
Is there a way to select connect on the Mac? Everything else I've connected a BlueTooth device to has both a command for pairing and a command for connecting or reconnecting. I can't figure out how to select connect on the Mac.

I have a new Macbook Pro - trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between the two. I follow the directions but the two computers never "discover" each other. WiFi connect works but 70 hours is a rough deal.

I have a new Macbook Pro. Trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between them.
I follow the directions but the two computers never "discover" each other - using a WiFi connection works but 70 hours is a rough deal.
(Mac OS 10.8.2 on both computers)

Are you trying target disk mode?
http://support.apple.com/kb/PH10725
Ciao

I am soo unhappy! Everyday I'm discovering what I cannot do on my iPhone 5s! Since September 20, I purchased the new 5s

I am soo unhappy! Everyday I am discovering what I cannot do on my iPhone 5s! Since September 20, I purchased the new 5s and iPad mini with Wi-fi and I have had nothing but trouble. I cannot use my iPad, it is worthless! My old iPad 3 worked better which I traded it in for. I cannot get Wi-fi to work properly on either device. I have to be standing next to my router for it to work. My router works fine and worked fine with my old iPad 3. The list is endless...... I am on my 3rd replacement for iPhone and still experiencing problems.
-Facetime just starts without me promting it
-I have almost every call I make drop
-Siri does not register with my voice, very frustrating!
-I have a new car and the 5s will not let me use my console phonebook favorites shortcuts
-I cannot attach a photo from a relpy or an email for that matter. WTH??? Why??
-I cannot scroll to the bottom of a page without playing "spin the wheel" and have the pop up screen come up and then accidentally hit private mode then miss phone calls. But I can scroll to the top with a couple of tries. I have small fingers so why is this so user unfriendly?
-My cellular connection notice keeps coming on? Why? Both on iPhone iPad
-My Wi-fi does not work I have to be standing next to my router for it to work for both my iPhone 5s and iPad mini. My router works fine and worked fine with my old iPad 3.
-My icloud is not saving my new phone numbers so each time I have received a new phone numbers get LOST!
- I now cannot look anything up while on the phone AND NO ONE TOLD ME THIS BEFORE I PURCHASED THIS PHONE! I really have needed it through all the time I have been on the phone with either Apple or Sprint! A total of of at least 40hours and I am not exaggerating!
-I have to switch to too many pages to write emails, texts or even phone calls! Not as easy as 1,2,3. WHY?
-Merging on iCloud can erase numbers be careful! What a nice option I thought. As my Android/Gmail basically threw up on my new iPhone. So I had multiple contacts of the same person. E.G. 5 Joe Smoo. All listed separately, one was an email,2nd was FB, 3rd Home phone, 4th cell and 5th fax or listed as other. Well, if someone has 2 cell phones or emails and you merge then iCloud takes the privilege of ERASING one of the 3s or contacts. Also, some of them were listed as other and that too got ERASED. Thank you iCloud! I only discovered this after merging at least 20 contacts because I was told I had to to manually go into my phonebook to try and fix the quadruplet or more names on my phonebook.
-There is more believe me! BTW I have been pretty dedicated to Apple (macbook, iMac and iPad), only I had an Android phone because my carrier didn't have iPhone & I did not want AT&T. This is turning me into sour grapes or should I say apples!!!!!!!!!!!!!!!!!
Please respond if you have similar problems or any because no one else seems to be experiencing such problems as I have. If you are an Apple employee then please have someone contact me.

Dude or hot-spur,
Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
Thank you again

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels. Any easy solution?
Steps:
1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
3. Downloaded and installed the current operating system (about a 3-hours process for me). OSX 10.9.2, here we are!
4. Then I returned to the Apple Store, found, and purchased Aperture 3. [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away. I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves. All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed. Screen-capture of just one example (at 100% viewer setting):
I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption. Lather, rinse, repeat - ~300 times! An estimated 2-3 hours of additional work.
Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list. I am running OSX 10.9.2
<Re-Titled By Host>

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

Questions on asm disk discover:

Questions on asm disk discover:
1）What is the relationship btween asm_diskstring in the init.ora and DiscoveryString in the GPNP profile.xml?
2) which one finally accounts for the disk discovery process?
3) We know that asmlib disks are self describing at the disk header. This overcomes the disk name/path persistency issue as we do not rely on the path the discover the asmlib
disks. asm_diskstring='ORCL:*' will identify the right disks. I am not sure if setting 'ORCL:*' is the most economic way as I am not sure if Oracle will have to scan all the disks
on the OS and probe the disks that it has rigths to determine which disks belong to ASM. If Oracle has to screen all the disks in this way, then I think setting
asm_diskstring='<path_to_asmlib_disk>' will be much faster. However, this will be open to the persistent problem. Is my understanding correct?
Thanks.

Questions on asm disk discovery:
1）What is the relationship btween asm_diskstring in the init.ora and DiscoveryString in the GPNP profile.xml?
2) Which one of the above two finally accounts for the disk discovery process?
3) We know that asmlib disks are self describing at the disk header. This overcomes the disk name/path persistency issue as we no long need to rely on the path to discover the asm disks, by setting asm_diskstring='ORCL:*' , ASM instance will identify the right disks automatically. However, I am not sure if setting asm_diskstring='ORCL:*' is the most economic way to do the discovery as I am not sure if Oracle will have to probe all the disks on the OS to determine the right disks. If Oracle has to screen all the disks in this way, then I think setting asm_diskstring='<path_to_asmlib_disk>' will be much faster, although this will be open to the persistent problem. Is my understanding correct?
Thanks.

Customising Discover plus for olap UI

Hi all,
I'm using Discover Plus with an OLAP data source and would like to customise the interface such that:
- The Query Pane window is switched on by default
- When creating a new report the "crosstab" radio button is highlighted by default (usually it's the crosstab and graph)
I realise that these are easy to change in the user interface itself, but I'd like to set their initial status when Discoverer starts - we're going to be rolling this out to around 500 users soon and these small changes will make life easier for everyone.
I suspect the answer lies in modifying one of the middle tier files, but having looked in pref.txt I can find nothing which relates to my requirements.
Any help much appreciated.
Thanks,
Mark...

Look for it in:
http://acidweb.ts.infn.it/oradoc/ias902/bi.902/a95458/conf_fil.htm#635592
There's a list of Discoverer configuration files. Hope this helps.
Marcos

Discover 4i to 10.1.2

Similar Messages

Maybe you are looking for