Discovered new Volume on managed storage is shown as "unmanaged"
Hello,
I'm working with OVM 3.1.1.305 and a managed storage device (ETERNUS).
2 volumes are configured on my storage device and this volues are used for repository and cluster file system.
With the storage plug in it is possible create new physical disks from OVM. So far so good.
But now I want to provide a new volume (lun 2) created directly on my storage device.
rescan-scsi-bus.sh was done and the new volume is seen on the OVM servers, so scsi1 and scsi2 have 3 volumes in total.
# sginfo -al
/dev/sg0 [=/dev/sda scsi0 ch=0 id=0 lun=0]
/dev/sg1 [=/dev/sdb scsi0 ch=0 id=1 lun=0]
/dev/sg2 [=/dev/sdc scsi1 ch=0 id=0 lun=0]
/dev/sg3 [=/dev/sdd scsi2 ch=0 id=0 lun=0]
/dev/sg4 [=/dev/sde scsi1 ch=0 id=0 lun=1]
/dev/sg5 [=/dev/sdf scsi2 ch=0 id=0 lun=1]
/dev/sg6 [=/dev/sdg scsi1 ch=0 id=0 lun=2]
/dev/sg7 [=/dev/sdh scsi2 ch=0 id=0 lun=2]
Also multipath is seen 3 volumes:
[root@OVM-Node1 ~]# multipath -ll
3600000e00d10000000100000000c0000 dm-3 FUJITSU,ETERNUS_DX400
size=18G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| `- 1:0:0:2 sdg 8:96 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
`- 2:0:0:2 sdh 8:112 active ready running
3600000e00d1000000010000000000000 dm-1 FUJITSU,ETERNUS_DX400
size=20G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| `- 1:0:0:0 sdc 8:32 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
`- 2:0:0:0 sdd 8:48 active ready running
3600000e00d1000000010000000010000 dm-2 FUJITSU,ETERNUS_DX400
size=500G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| `- 1:0:0:1 sde 8:64 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
`- 2:0:0:1 sdf 8:80 active ready running
The problem is now that the new volume is seen as an unmanaged Fibre Channel Storage array.
A "rescan physical disks" on each OVM Server did not solve the problem.
How can I see the new volume as a managed volume?
Thanks for help.
Glad to here it is sloved, thanks for sharing your solution and experience here.
Regards
Yolanda
TechNet Community Support
Similar Messages
-
Creation of new handling unit management storage location
Hello
I am using transaction HU02 and create a handling unit from existing material. But i don't have any HU management storage locations in the system.
Could you please explain me how to create a HUM storage location?
Thanks,
IlyaHello,
I am trying to create new Handling unit, with HU02 t-code, and i am getting the following errror:
The number range object 1 does not exist
Message no. NR002
Diagnosis
The number range object was not defined.
Procedure
Maintain the specified number range object using Transaction SNRO.
I've customized number range for object LE_SSCC in SNRO.
Сould you please advise, what is my mistake?
Thx in advance -
Please help. Replaced broken phone w/new 4s. I did as the genius bar guy said and did reset>erase all content and settings at home because he said it would take too long in the store. Last time I had to replace my phone, all the photos and video were there. Now they're not. I had set up icloud but when i typed in "my restore from icloud", nothing came up. I NEED those pictures and videos. They're the last photos and videos I have of my mother who passed away recently. Please I need them back. I feel like I've lost her all over again. Please someone help. I went to icloud>storage & backup>manage storage and i see that those pictures were backed up yesterday yet I don't see any pictures or picture icon in icloud.com. Please someone help me get those pictures back. They're priceless and they're the last I have left of my mother.
If this is your first sync and there is already data on the phone, perform the steps listed below. This will transfer your apps and other media purchased from the iTunes store to your iTunes library, perform a manual backup and restore, then sync the iTunes media back to the phone from your iTunes library. This will not transfer media from other sources such as music from your ripped CDs. As you said you never synced before, I assume all of your apps, music and other media was purchased from the iTuens and App stores. If this is correct, you won't lose anything.
Download and install iTunes: http://www.apple.com/itunes/.
Launch iTunes, go to the View menu and click to check Show Sidebar.
Go to iTunes>Preferences>Devices (Edit>Preferences>Devices if using Windows) and check "Prevent...from syncing automatically".
Go to Store>Authorize This Computer and authorize all Apple IDs used to purchase apps and other iTunes media (music, podcasts, movies, tv shows, etc.) on your phone.
On her phone, go to Settings>iCloud>Storage & Backup and turn iCloud Backup to Off.
Connect her phone to your computer and in iTunes go to File>Devices>Transfer Purchases to transfer your purchased media to your iTunes library.
Right-click on the name of the phone on the left side of iTunes and click "Reset Warnings".
Right-click on the name of the phone again and click "Back Up" to back up the phone.
Right-click again and choose "Restore from Backup...", select the backup you just made to restore from and restore the backup to your phone. If prompted to back up again, decline.
Go to the Info tab and make sure nothing is checked so you aren't syncing calendars, contacts, etc. with iTunes.
Go to the Summary tab and select This Computer under Automatically Back Up.
Check the other tabs to confirm that your sync settings are the way you want them.
Click Apply at the bottom to sync your phone. -
How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!
Thanks very much!
Although I had to add everything again to the playlist, at least I can just copy it over in future! -
On my new ipad ios 5.1.1 when i try to tap the manage storage it just loads for a sec but doesnt open and i cant manage my iphone 4 on 5.1.1
Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
Im not good with any of this so bare with me please. On my iphone 4 anything to do with ICloud to manage storage or under Accounts(icloud,gmail,add account,ferch neew data are all in gray and cant access. Even just under settings, icloud is in gray. Im trying to download ISO7. My phone has gotten exstreamly slow. So frustrated !!
Do you have any restrictions set in Settings > General > Restrictions?
-
Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
OWA can't be accessed after moving data files to new volume
SBS 2008 Exchange 2007
Used the Move Files wizard in SBS Console to move Exchange files off of system drive to a storage drive. Wizard said move was successful. Opend Exchange management Console and verified path to files under Server/Mailbox.
I get this error and the details when trying to access OWA. Server and user names have been changed to protect the innocent. :)
Can anyone offer a suggestion or solution?
Outlook Web Access could not connect to Microsoft Exchange. If the
problem continues, contact technical support for your
organization.
error details
Show details
Request
Url: https://remote.contoso.com:443/owa/default.aspx
Exception
Exception
type: Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException
Exception
message: Cannot open mailbox /o=First
Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=JohnDoe.
Call stack
Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String
serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid,
Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag,
CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String
serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid,
Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag,
CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String
serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid,
Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag,
CultureInfo cultureInfo, String clientInfoString)
Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(LogonType
logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object
identity, OpenMailboxSessionFlags flags)
Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType
logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object
identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String
clientInfoString)
Microsoft.Exchange.Data.Storage.MailboxSession.Open(ExchangePrincipal
mailboxOwner, WindowsPrincipal authenticatedUser, CultureInfo cultureInfo,
String clientInfoString)
Microsoft.Exchange.Clients.Owa.Core.OwaWindowsIdentity.CreateMailboxSession(ExchangePrincipal
exchangePrincipal, CultureInfo cultureInfo)
Microsoft.Exchange.Clients.Owa.Core.UserContext.Load(OwaContext
owaContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.CreateUserContext(OwaContext
owaContext, UserContextKey userContextKey, UserContext& userContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.PrepareRequestWithoutSession(OwaContext
owaContext, UserContextCookie userContextCookie)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.InternalDispatchRequest(OwaContext
owaContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchRequest(OwaContext
owaContext)
System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean&
completedSynchronously)
Inner Exception
Exception type: Microsoft.Mapi.MapiExceptionLogonFailed
Exception
message: MapiExceptionLogonFailed: Unable to open
message store. (hr=0x80040111, ec=-2147221231) Diagnostic context: Lid: 18969
EcDoRpcExt2 called [length=981] Lid: 27161 EcDoRpcExt2 returned
[ec=0x0][length=132][latency=15] Lid: 23226 --- ROP Parse Start --- Lid: 27962
ROP: ropLogon [254] Lid: 17082 ROP Error: 0x80040111 Lid: 26937 Lid: 21921
StoreEc: 0x80040111 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote
Context Beg ---- Lid: 26426 ROP: ropLogon [254] Lid: 22787 Error: 0x0 Lid: 13032
StoreEc: 0x8004010F Lid: 59409 Lid: 45073 Lid: 11173 StoreEc: 0x80040111 Lid:
22970 Lid: 8620 StoreEc: 0x80040111 Lid: 1750 ---- Remote Context End ---- Lid:
26849 Lid: 21817 ROP Failure: 0x80040111 Lid: 26297 Lid: 16585 StoreEc:
0x80040111 Lid: 32441 Lid: 1706 StoreEc: 0x80040111 Lid: 24761 Lid: 20665
StoreEc: 0x80040111 Lid: 25785 Lid: 29881 StoreEc:
0x80040111
Call stack
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message,
Int32 hresult, Int32 ec, DiagnosticContext diagCtx)
Microsoft.Mapi.ExRpcConnection.OpenMsgStore(OpenStoreFlag
storeFlags, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, MapiStore
msgStorePrivate, String& correctServerDn, ClientIdentityInfo
clientIdentityAs, String userDnAs, String applicationId, CultureInfo
cultureInfo)
Microsoft.Mapi.ConnectionCache.OpenMapiStore(String mailboxDn, Guid
mailboxGuid, Guid mdbGuid, ClientIdentityInfo clientIdentity, String userDnAs,
OpenStoreFlag openStoreFlags, CultureInfo cultureInfo, String applicationId)
Microsoft.Mapi.ConnectionCache.OpenMailbox(String mailboxDn, Guid
mailboxGuid, Guid mdbGuid, WindowsIdentity windowsIdentityAs, String userDnAs,
OpenStoreFlag openStoreFlags, CultureInfo cultureInfo, String applicationId)
Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String
serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid,
Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag,
CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)Hi Esyxx,
Based on your description, I understand that you move Exchange Server Data to a new volume. And then encounter
issue when access OWA. If anything I misunderstand, please don’t hesitate to let me know.
à
I get this error and the details when trying to access OWA.
Would you please let me know whether all users encounter the same issue? Or just some specific users? After
moving, did you
manually mount the mailbox database? If access mailbox via Outlook, will still encounter any issue?
In addition, please run Exchange BPA and
SBS BPA, then fix all that they can find and monitor the result.
By the way, I noticed that you post screenshot here. However, pictures seems to be damaged. Would you please
provide the screenshot again or upload it in
OneDrive, then post link here? Thanks for your understanding.
Regarding to moving Exchange Server Data, please also refer to following article and check if can help you.
Move the Exchange Server Data
Hope this helps.
Best regards,
Justin Gu -
After a RAID 5 failure, I have set up my data volume as RAID 10 using 4x2TB WD Red drives. The volume shows as OK on bootup and in the
Intel Rapid Storage Technology dialogue but it does not come up as an available drive.
I have initialised it in both the Intel Rapid Storage Technology dialogue and in
Control Panel\ Administrative Tools\ Disk Management and presumably I have yet to create a new volume in
Disk Management. For RAID 10 do I select New Spanned Volume..., New Striped Volume... or New Mirrored Volume?
I don't think it can be a spanned volume but since RAID 10 is both striped and mirrored, which do I select?Glad to here it is sloved, thanks for sharing your solution and experience here.
Regards
Yolanda
TechNet Community Support -
I am trying to restore an icloud backup from a 4s to an iphone 4. Eventhough it shows up in manage storage the 4s backup is not an available option after a full restore of the iphone 4 and then selection to back up from icloud.Only the 4 backups show up, not the 4s's.
Can you only restore icloud back up 4s to 4s?if you cant remember the password of your back-up encryption, you can't back it up
You will have to restore as a new phone -
How do I move databases to a new volume with the same name?
When I first set up Snow Leopard Server, I chose a different volume to keep the databases such as mail, iCal, etc., during the setup program.
I'm running out of space on that volume, so I installed a new hard drive with the same volume name and copied all the files over to it, but when I restarted the server I started getting error messages and no one could send mail. I'm assuming it's a permissions thing.
So I do I move everything to a new volume?- I logged out as Administrator, and logged back in as Root.
- Disconnected the services in Server Admin.
- Copied the ServiceData folder from old volume "Storage" to new volume "Storage".
- Unmounted old volume "Storage".
- Restarted all services.
Dec 5 12:58:49 companyname dovecot[65]: IMAP(*): stat(/Volumes/Storage/ServiceData/Mail/17D8D54B-0529-4BD6-8467-757C3EA7C75B/tmp ) failed: Permission denied (euid=1025(username) egid=20(staff) UNIX perms seem ok, ACL problem?)
Mail, Web, iChat and Address Book servers do not work.
What do I do now? -
Icloud manage storage link not working on my iphone 4s
I need to manage my icloud storage, but the manage storage link on my iphone is not working. When I click on it, nothing happens. Can anyone help with this problem? I don't want to buy more storage if I can turn off some of my apps in icloud. Has anyone else had this problem? Thanks!
Had the same problem recently (on an iPhone 4S, iOS 5.1.1). The phone couldn't back up to iCloud as the storage limit had been exceeded, and tapping "Manage Storage" in the iCloud settings didn't work: it just briefly showed a spinning wheel but I couldn't enter the Manage Storage screen. Looks like a bug.
In the end I was able to solve it via the iCloud settings on a laptop. Using this route, I removed the backup that was clogging the available 5GB free storage and was able to access Manage Storage again to tweak the settings. In my case this meant disabling iCloud backups of photos in the camera roll, which was the reason for the large size of the backup file in the first place.
Here's what I did:
1. Important step: first of all, make a backup of your phone in iTunes by connecting it to the computer and chosing the backup option in iTunes. You will delete the iCloud backup in step 3, so it's best to have another backup handy. It's not very likely your phone will crash in the short time it takes to complete these steps, but better safe than sorry.
2. After making the full phone backup, I downloaded all the photos from the camera roll onto my computer and deleted them from the phone. There are different ways of doing this, on a Mac you can for instance use Image Capture. This step is not really necessary to get the backups working again as you will probably disable camera roll backups in step 3 anyway, but it's good to get into the habit of backing up photos on the computer regularly, rather than in iCloud. If you want to keep some photos on the phone as well, you can always copy them back from the computer onto the phone.
3. Access iCloud storage management via the computer rather than the iPhone. Instructions: http://support.apple.com/kb/ht4847 > Backup > Deleting backups and turning off Backup for your device > Mac OS X (or Windows 8, Windows 7 and Vista). If you use a Windows computer and the iCloud control panel hasn't been installed yet, you can find it here http://www.apple.com/icloud/setup/pc.html.
I don't think you can delete specific elements like the camera roll from the backup this way, you have to delete the whole thing. But you made another backup in step 1 so this isn't really a problem.
4. On the iPhone, try to access Settings > iCloud > Storage & Backup > Manage Storage again - it should work now. In the next screen, choose your iPhone and you will get the Backup Options where you can switch backups on and off for different apps. It shows you how much storage each app takes, you will probably see that the Camera Roll is the largest so you may want to switch that off. Once you're happy with the settings, go back two screens to Storage & Backup and switch Icloud Backup back on (it was automatically switched off in step 3), and if you are on Wi-Fi, tap Back Up Now so it makes a new iCloud backup right away.
That's all, hope it solves your problem. -
Can't create a new volume on 6540
Hi,
CAM 6.5.0.13, 6540 with 07.10.25.10
when I try to create a new volume on 6540 it fails after step 1.1 with:
javax.servlet.ServletException: javax.servlet.jsp.JspException: org.apache.jasper.JasperException: java.lang.NullPointerException
at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:846)
at org.apache.jasper.runtime.PageContextImpl.access$1100(PageContextImpl.java:71)
at org.apache.jasper.runtime.PageContextImpl$12.run(PageContextImpl.java:766)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:764)
at org.apache.jsp.com_005fsun_005fweb_005fui.jsp.wizard.WizardWindow_jsp._jspService(WizardWindow_jsp.java:318)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:654)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:445)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:379)
at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:65)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:80)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:284)
at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
at com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
at com.sun.management.services.session.CoreSessionManagerFilter.handleRequest(CoreSessionManagerFilter.java:649)
at com.sun.management.services.session.CoreSessionManagerFilter.doFilter(CoreSessionManagerFilter.java:412)
at sun.reflect.GeneratedMethodAccessor43.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
[...]How are you trying to create it and what happens when you do
-
Help managing storage on ipad2 with iphoto
I recently travelled overseas and uploaded all my photos from my digital camera to the ipad. Edited and made journals.
I have now saved all the journals as web pages via itunes, thanks to good advice by leonie and have exported all my edited photos to the camera roll and then synced them to my mac iphoto.
The mac now says there are no photos on the ipad. That is true, the camera roll on the ipad is empty. However in ios iphoto there is still 19.gb of data. It seems to have retained information about all 2000 photos i edited, created tags for etc. all the albums and events are now gone, but how do I clear out this information. By exporting all the edited photos I think they are now new images from iphotos point of view so shouldn't it be Ok to delete it all? I have the originals of all photos on an sd card if I need them.
I need all the space on the ipad for my next trip and the space it is using is now bigger than my ipad icloud storage limit of 15gb, so back ups to the icloud wont work either.
Any ideas? I couldn't find any previous discussion on the site about issues managing storage?
Thanks
VeronicaDeleting photos in iPhoto on the iPad is not so easy. If you want all photos gone, the quick-and-dirty way would be to uninstall iPhoto and download it again. That would delete all photos at once, but also your journals.
iPhot does not really store photos, other than for journals, and also it will keep copies of edited photos, if you delete the original from the camera roll.
See: What are albums?
iPhoto creates the following albums as needed:
Camera Roll: Photos you take with this device or save to the Camera Roll.
Recent: Photos most recently viewed in iPhoto.
Edited: Photos you edit using iPhoto. This includes photos you add captions to.
Flagged: Photos you flag.
Favorites: Photos you tag as favorites.
[Custom]: Photos you add a custom tag to. For every custom tag you create, iPhoto creates a new album in which all photos with that tag appear.
iTunes: Photos imported from iTunes using file sharing.
[App]: Photos sent directly from other apps to iPhoto.
Beamed: Photos beamed from another device.
AirDrop: Photos transferred from another device using AirDrop.
Photo Box: If a photo appears in an album (Edited, Favorites, Journals, or custom) and you delete the photo from your device, the photo remains in the album. If you remove the photo’s edits and tags, or delete the photo from the journal, iPhoto moves the photo to the Photo Box album (and removes it from the album it was in). If you edit or tag a photo in the Photo Box album, or add it to a journal, the photo is removed from the Photo Box album (and added to the appropriate album).
Look at the albums "Edited" and "Photo Box". These are iPhoto's safety copies. To be able to delete these Photos, you will have to undo the edits, tags, captions. Otherwise will iPhoto not delete the photos.
It might be easier after all, to back up your iPad to iCloud and simply to uninstall iPhoto and reinstall it todelete all photos at once, if you are really sure, that you saved all photos to your Mac. -
Volume Activation Management Tool invalid characters bug.
I have a Multiple Activation Key from my Technet subscription for Windows 8 Enterprise, and wanted to
find out how many activations I am allowed, and how many I have left. I was advised by a colleague to
download and install the Volume Activation Management Tool 2.0 from Microsoft.
Whilst using this tool, I've found what appears to be a rather serious bug. It does not allow entry of the
product key I wish to manage. If I copy/paste the key under Add Product Keys, it deliberately ignores
one of the characters in the second section of the product key, specifically the letter N.
If I attempt to enter the key manually, it says Invalid character in the product key when I come to this
particular letter. On further investigation, VAMT 2.0 sees several other letters as invalid characters.
It wrongly says all of the following letters are invalid characters - A - E - I - L - N - O - U - S - Z .
This bug makes it impossible to add the product key, and almost impossible to add any other key.Hello,
Which problem are you referring to?
The first issue was with VAMT not recognizing some the characters in the newer product keys, the solution for that is to use VAMT 3.0 or preferably VAMT 3.1 now.
the second issue is the prompt to create a database and all you need to do is enter a name on the database line and it will create one( leave the Server line alone.)
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.
Tried that ... it doesn't work. I type my machine name into the Database line and after a few seconds I get this . . .
Running SQL Server Express, the server name is listed as DJGMPC/SQLEXPRESS, so I put that in the Server line
and type the machine name DJGMPC in the Database line, and VAMT finally establishes a connection with
this SQL Server that shouldn't really be needed in the first place, when VAMT2 managed OK without it.
Maybe you are looking for
-
Events in iCal on Mac Mini don't upload to MobileMe during Sync
I have many iCal events on my Mac Mini, running OSX 10.6.8, that don't sync up to my MobileMe iCal and thus don't sync back down to my MacBook Pro, also running OSX 10.6.8, nor to my iPhone. As a result, I'm not getting notified of events that I shou
-
The wifi doesn't even connect anymore
-
I JUST PURCHASED THE OS X MOUNTAIN LION AND I TRIED TO INSTALL ON MY MACBOOK PRO AND IT GAVE ME AND ERROR AND SAID DELETE THE FILE AND GO TO THE APP STORE AND RE DOWNLOAD AGAIN WHICH IM DOING NOW....BUT DOES ANYONE KNOW WHY IT COULD HAVE DONE THIS FR
-
Does InDesign rasterize SVG's from Edge?
I created an Edge animation whose ultimate destination is for an iPad app authored in InDesign. To avoid any font issues and to make this viewable in all iPad flavors (retina), I imported three lines of text as well as a text logo as SVG files from I
-
So my friend posted a funny pic in her christmas outfit and I thought it would be fun to turn it into a fake Christmas Movie poster.. Anyways.. My computer crashed.. "It does that sometimes" I re-opened my PSD and it says "Unable to complete request