Discoverer 10g not returning same data every time

Hi all
Has anyone come across this at all?
I have a client who is reporting that sometimes, not always, when they run a query, the data comes back with wrong ID number. They can then run the query again and it will then give the correct IDs. Sometimes they say they have to run it a couple of times before it pulls the data correctly.
My first thoughts were webcache but they tell me this is happening in Plus.
I have to say that I have not seen this behavior before so if anyone has any insights or has seen this please let me know.
Best wishes
Michael

Hi there,
I would do the following before even start looking at the report.
- Export both the report [correct and incorrect versions] with Parameter listing and try to replicate the problem in development environment.
- Check the SQL query behind the report and execute it with the parameter values given.
I know this not the solution/answer you are looking for. I would do this if I am in a similar situation.
Hope this helps you get to the bottom of the problem.
Best Regards,
Manish

Similar Messages

Discoverer 10g, it returns no data

Hi all,
I have a doubt can any one clarifies.
Currently I work migration projects from 4i to 10g discoverer reports (Upgraded 11i to R12). Previously in 4i discoverer reports many views used and data also populated. Same query in discoverer 10g, it returns no data. I can view the data after setting client org id in the toad but can’t view the data in the discoverer reports. Even I tried to register as a function for setting client org id and use in the discoverer reports but result is no rows return. Can any one suggest?
Regards,
Prasanna
no data

Hi,
Check Metalink Note 732826.1. There are some extra steps need to configure R12 with Discoverer.
Rod West

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Form 10g not returning any data

Hi,
I have created a simple data-block based on a view in a seeded Oracle R12 form. When i run the form, I can see all fields on canvas but as blank. Pre-query trigger fires, on-select fires, on-fetch too fires. But Post-query trigger doesn't fire.
View has 2 rows, so as per my understanding Post-query should fire 2 times. But it doesn't.
When i run the same query on view in Pre-query trigger and get the count. It returns me 2.
Am i missing any setup or property on data block.
Thanks!!
Harleen

Harleen,
As you are working on a EBS R12 form, I suggest you post your question in the General EBS Discussion forum. EBS Forms must comply with Oracle Development Standards and there are specific objects that must be included in your form. If you haven't already, you might want to take a look at the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
<ul>
<li>Oracle Applications Developer's Guide
<li>Oracle Applications User Interface Standards for Forms-Based Products
<li>Oracle Application Framework Personalization Guide
</ul>
Craig...

Re: ResultSet not returning same data

Thanks to all who offered thoughts / advice on my post yesterday. For those interested here is what I found.
The Problem -
String data stored in MSSQL7 DB, transferred to MySQL4 DB, then pulled for an application did not match. Tests proved that the data IN the DB matched.
What I found -
Strings that were using unique chars such as French and German accent chars were NOT being returned correctly. It seems that when I call
ResultSet.getString() using my SQL7 DB driver I would get a different result than when calling the same method in my MySQL4 Driver.
To fix the problem I had to use
String myString = new String(
ResultSet.getBytes()
);It seems that the DB driver was "assuming" what I wanted when using getString().
Further tests proved that...
MySQL DB Driver
getString() == new String(getBytes()) true
SQL7 Driver
getString() == new String(getBytes()) false
Just in case anyone was interested.
Thanks for listening.
ST

In MySQL you can configure the charset used by the database. The default is "latin1", and if you have the correct data in your program, you can just use getString() and setString(). That setup handles strings with French and German accented characters, I know that because I have a program that does it.
Perhaps your MS SQL configuration isn't working right? I don't have any experience on how to set that up.

Unable to download e-books after PC upgrade. I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive. Unfortunately my copy of ADE is not so cooperative. Every time I try to download a

I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive. Unfortunately my copy of ADE is not so cooperative. Every time I try to download an e-book I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12". Uninstalling ADE (all three versions) along with cleaning the registry does not clear the error. And I cannot de-authorize and reauthorize my new laptop as the de-authorize option is greyed out. Anyone else encounter this issue?

Problem solved finally. Used regedit.
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html

The ff default theme keeps re-enabling itself after computer restart even though I enable littlefox and restart firefox, and it does the same on more than one computer. I want littlefox to start with firefox, not have to enable every time.

I want littlefox to start with firefox, not have to enable every time the computer starts.

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

Ibots not returning any data

Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
     saw.odbc.statement.fetch
     saw.subsystem.portal.pdf
     saw.delivers.rpc.getDeviceContent
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUND

Thanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish

Discoverer Viewer not showing correct data when scheduled

Hi All,
I have a bit of an ongoing issue and cannot find an answer through Oracle.
We have an issue that when a cross-tab workbook is run manually in Desktop this returns correct data, when scheduled in desktop it returns correct data in desktop, but when opening the scheduled workbook in viewer, incorrect and irrelevant data is returned
Here is a little information on the field that is not returning correct data;
The field is based on a calculation, the calculation (lets call BOB) contains PL/SQL function concatenated with an NVL calculation, this other calculation is a DECODE. I have been playing with changing the content of the BOB calculation, by removing the PL/SQL function and the DECODE calc from BOB and scheduling the report, the data is returned in viewer, in fact i've attempted one without the other and this still does not return the correct data.
This version of discoverer that is not returning data is V 10.1.2.50.05. I've tested this on a later environment with Discoverer V 10.1.55.26 and the data is returning correctly through the sceduled report in viewer.
My questions;
1. Has anyone ever come across something similar to this in version 10.1.2.50.05
2. Is there any detail available regarding what upgrading to 10.1.55.26 offers?
3. Know any workaround for using PL/SQL calculations in a scheduled workbook? I am aware that not aggregable items will not be returned in v11 when scheduling workbooks.
Many thanks in advance for any help.
Simon

Bumping this thread
Thanks
Si

Adobe Media Encoder for Premiere Pro CS4 stops working on the same frame every time...

I currently have Adobe Premiere Pro CS4 and have never had these issues exporting before. My timeline is less than 3 minutes long, but it does deal with multiple big files. It rendered perfectly and it plays perfectly in the timeline. When I try to export it using Media Encoder, however, it freezes at the same frame every time (which is actually only a few seconds in!) and then crashes, so that I have to force quit. I have tried exporting it as many different codecs and the problem persists... same frame. I tried creating a new project entirely and whipping together a few titles and exporting that to see if it just won't export anything at all. The new project exported just fine, however, which I suppose is good news. But yeah, my work on that other project is very important to me and I reallllly want to export it. Please help!

Hi Jim! Thank you for your reply. I think you are right -- and that it lies in the audio somehow!
It turns out that if I choose to only export the video, and uncheck audio, it will export very well and smoothly. That's great news for me!
However, now I am trying to work out how to get the audio exported without issues. I actually had the idea of just playing the audio in the timeline and recording it via Stereo Mix, but my Windows 7 driver has Stereo Mix disabled, so it's back to square one. Any ideas of what I can do about the corrupted audio not exporting, which works fine when played in the timeline?

Custom reports in R12 not returning any data

I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.

I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan

When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

BC4J - ViewObject not returning latest data

BC4J - ViewObject not returning latest data. Some kind of EO/VO Cache Latency Issue.
I have an edit page that presents a drop-down list which is suppose to display * un-assigned * messages, but does not. The drop-down list is using an <jbo:InputSelect> tag that gets values from a ViewObject (UnAssignedMessageView ) which issues the query listed below. Note, the ViewObject is not based on an Entity Object.
(Query in UnAssignedMessageView)
select      message.message_desc_short, message.message_id
from     fmm.message
where      message.message_id not in (select cardmessage.message_id from fmm.card_message)
and message.message_id != 0
(from the edit.jsp)
<jbo:ApplicationModule id="am" configname="com.maxmcbyte.fmm.model.ModelModule.ModelModuleLocal" releasemode="Reserved" />
<jbo:DataSource id="ds" appid="am" viewobject="CardMessageView1" />           <<****** The VO where the inserts/updates are recorded.
<jbo:DataSource id="ds2" appid="am" viewobject="MessageUnAssignedView" />     <<****** The VO for the unassigned message drop-down-list.
The problem is at step 3.
Starting with 3 Unassigned Messages.
Step 1: enter new record AND select a MESSAGE_ID from the drop-down list.
Step 2: commit the transaction.
Step 3: enter another record AND select a MESSAGE_ID from the drop-down list.     <<****** the list should now be displaying 2 unassigned messages but is displaying 3.
Note, if I check the database after step 3 using the same query as in the UnAssignedMessageView I get the correct result. I guess I'm not understanding how BC4J ViewObject Caching is working. It is strange that even after I commit the record that the cache is not updated.
I have read the docs and will have to re-read them again * but * it would be REAL NICE to see an illustration of "A DAY IN THE LIFETIME OF DATA IN BC4J" for dummies like me.
Can anyone tell me what I'm missing here AND what specifically needs to be done?
Thanks All,
Bill G...

Well, I figured it out * BUT * this is the sort of thing that I'll bet stumps a lot of new users * AND * should be posted to a "Gotch-Ya" list.
I'd still like to see an illustration of "A DAY IN THE LIFE OF DATA IN BC4J"
Bill G...
<jbo:ApplicationModule id="am" configname="com.maxmcbyte.fmm.model.ModelModule.ModelModuleLocal" releasemode="Reserved" />
<jbo:DataSource id="ds1" appid="am" viewobject="CardMessageView1" />
<jbo:DataSource id="ds2" appid="am" viewobject="MessageUnAssignedView" />
<%-- adding this did the trick --%>
<%
ViewObject view2 = ds2.getRowSet().getViewObject();
view2.executeQuery();
view2.first();
%>

Same Tunes Every Time

I've had my iPod Touch for about a month now. As I look at iTunes when my iPod Touch synches with my MacBook Pro laptop, it seems that over and over it needs to update the same 7-10 songs. Same songs every time. And I haven't even played them. There should not be any reason to update these songs, but they are synched every time.
Anyone else seeing this?
Neal

If just replacing the artwork on the offending songs doesn't fix it, I read from another user here that you can try changing the iPod to manual mode, then back to auto-sync. Not sure if that actually works though, but seems harmless.

Discoverer 10g not returning same data every time

Similar Messages

Maybe you are looking for