Discoverer 3.1 to 10g rel 2 EUL upgrade incorrect results

hi.
my client has discoverer 3.1 installed a decade ago (shewww)... i just upgraded the eul to 10g rel 2 version of discoverer ... i didnt encounter any error at all during the upgrade. but the results are not correct in new upgrade. i tried to digg into this problem and found out that all the joins in resultent query are outer joins...
is this a bug? or something that i did wrong. i need help.
thanks.
iffi

Hi,
Are these joins defined as outer joins in the EUL? Did you have the DisableAutoOuterJoinsOnFilters set on the old environment?
Do you have multiple detail folders in the worksheet from the same master folder?
Rod West

Similar Messages

  • IAS 10g rel 2 BI and Forms services

    I have the IAS 10g rel 2 infrastructure on a RH v3 server and, as we need Discoverer, plan on installing BI on the same server. We also need Forms and Reports services as well.
    As I don't see Forms services in BI (although the documentation says it is) the following questions arise:
    - If I install BI without Reports services, is it possible to install Forms and Reports services from the stand-a-lone version into the BI $OH? Or, would it require another separate $OH for the Forms and Reports services?
    - If I install BI with Reports services, is it possible to install just the Forms services into the BI $OH? Or, again, is a separate $OH required for just the Forms services?
    Your responses are much appreciated!!

    There are three installation types that are pertinent to this question:
    From Oracle Application Server 10g CDs, you can install BI and Forms Services and configure Discoverer, Reports, Forms (and even Portal). This has dependency on Infrastructure.
    From Forms and Reports Services CDs, you can install Forms and Reports (in a seperate Oracle Home, never into BI and Forms install O_H). This has no dependency on Infrastructure.
    From BI Cds, you can install Discoverer and Reports with no Infra dependency. It has to be in its own Oracle Home only.
    So if your need is to run Discoverer, Reports, Forms in one Oracle Home but have no infrastructure dependency, it is not possible.
    Regards
    Pavna

  • Forms 10g rel.2: new behaviour when accessing the db and not logged on

    If I start a form and I'm not connected, then I have a problem with one of my standard-logon-routines.
    This behaviour is new in 10g rel.2 I think.
    If I start a function on the db and the form is not connected I get a FRM-92101 - There was a failure in the forms server during startup...
    This is a migrated form, which runs in 6i, 9i, 10g rel.1, but not in rel. 2.
    Who nows a workaround ?

    see my post in this thread:
    FRM-92101 when user tries to log on with invalid password

  • Is it a bug in Oracle 10g rel 1

    I have server installed in Oracle 10g rel 1 and I have client installed as oracle10grel2. I am unable to export data from client machine. It is giving me a error. Can anyone help me out.
    Regards
    Vijay Kumar

    You need exp from 10gR1.
    Oracle works in downwards compatibility mode.
    This means lower version clients can connect to higher versions server, not necessarily the other way around.
    exp is a specific case as exp has sql statements hardcoded in the tool.
    Those statements are version specific.
    (One would wish Oracle would change exp to bail out immediately when connected to a lower version database)Due to this only, I need the URL for client of version 10g rel 1 for the server 10g rel 1.
    Regards
    Vijay Kumar

  • AlertfileErr: ORA-02097 and ORA-00439 on Oracle 10g Rel 2 Stdrd Instances

    Hello,
    I need some help for the following alert file erros, that I get periodically on every database instance.
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-00439: feature not enabled: Database resource manager
    I red in another newsforum, that this ist a bug, cause Oracle Standard Edition uses functionality of the Enterprise Edition(=DB Resource manager). Is there any workaround for this? I don't have access to the Oracle metalink section.
    Database Resource Manager isn't installed in my environment.
    Environment:
    Windows 2003 SP1
    Oracle Database 10g Rel 2 (10.2.0.1) Standard Edition
    Hope anybody can help me.
    Thanks in advance,
    Zigi

    Yes,
    and That's exactly my problem. I haven't installed the resource manager. And I don't know which process, session, jobs or what ever tries to use the resource manager.
    I only created round about 50 Tables and views in the database, no stored procedures or anything special, no jobs.... only simple SQL Statements.
    and I'll get this message nearly every 6 hours. so what is going on there.
    The only thing, that i found was this:
    http://ora-02097.ora-code.com/msg/49049.html
    I don't have access to metalink so I don't know how to solve this problem.
    Can anybody help?

  • Oracle 10g Rel 2  - Proxy connection authentication with SAP User ID

    Dear Experts,
    We are currently doing some research and planning to upgrade SAP R/3 4.6C to ECC 6 and upgrading Oracle from version 9.2 to 10.2
    In upgrading to Oracle vers. 10g Rel 2, we got advised that Oracle has apparently introduced a new proxy connection authentication, in which the SAP user ID is given limited privileges (create session only) ??
    If you have any information on this or known any impact about this issue, please advise us.
    Thanks in advance.

    Thanks for your help, Kaushal.
    I also found the SAP Note 834917 (Oracle Database 10g: New database role SAPCONN and it seems to be on a right direction to cope with that problem.
    - For Oracle releases earlier than 10gR2, the CONNECT role includes extensive database authorizations and the more restrictive CONNECT as of 10gR2.
    - To overcome this restriction, SAP need to find a way to compensate this, so does it come SAPCONN.
    - SAPCONN is the new SAP-specific database role, which is defined to support the normal SAP applications operations (CONNECT, RESOURCE and SELECT_CATALOG_ROLE).
    Once again, thanks.

  • Oracle Application Server 10g Rel 3 and forms Application Deployment

    Dear All,
    I am in process of installing Oracle AS 10g rel 3. and I have an application (ERP) devloped in Oracle 10g IDS (Devloper Suite). So when I read the installation Doc for Oracle 10g rel3 installation I didn't get any information regarding the forms-reports component.
    So can somone please tell me how I can deploy my IDS based application in Oracle 10g Rel 3 Application Server. Or if there is any other process to deploy the application in application Server.
    Oracle AS 10g Rel3 DVD containing the following folder------ bpel, companioncd, esb, owsm, soa
    Thanks in Advance.
    Pradeep Sharma

    Hi Pradeep,
    Forms cannot be deployed in 10gR3. you need to have 10gR2.
    thanks,
    --Ranga                                                                                                                                                                                           

  • Need ACES attention - connection pooling in oracle 10g rel 1

    I am using TOMCAT 5.0.19 Webserver and ORACLE 10g REL 1 as the database server. I have to restart the TOMCAT Webserver in order to establish connection atleast twice or thrice in a weak. Why I am unable to see the connection pooling in oracle 10g rel 1. How to revive or establish the setup. My objective is to have a centralised oracle 10g rel 1 database server and the applications of java are run thru centralised Webserver Tomcat 5.0.19.
    Can anyone please help me out optimizing the design setup.
    Regards
    Vijay Kumar

    by putting 'Need ACES' in your post title, you might have actually reduced the number of people reading your post, in other words someone >who might have suggested Thanks John for your reply. I changed the subject of the thread after not getting any reply for past 10 days. Last two days I have been updating with plea for attention to my problem. Finally I thought pulling attention of ACES, then only I edited the subject.
    Now, problem I am facing is not in oracle database but in application server. Actually we are running web applications thru Tomcat accessing Oracle 10g rel 1. I am often losing connection with web server. The users are unable to login in the web application. I was told to check oracle database server. I just checked alert log and found no errors. I just asked them to shutdown and restart the web server Tomcat 5.0. It then worked fine. This is temporary. I need to ensure where the problem is. Could you please guide me in checking various parameters or files to be checked to optimise connection pooling.
    Regards
    Vijay Kumar

  • Error when installing AS 10g Rel 2(10.1.2.0.0) on solaris 5.9

    downloaded application server 10g rel 2 (10.1.2.0.0) - portal and wireless for solaris 5.9/sparc.
    when i try to install i see some link errors related to ssl functions and libnnz10.so in the install logs
    e.g
    ssl_DisableClientAuthentication undefined symbol first referenced in libnnz10.so
    does any one have any hint or suggestion? thanks in advance.

    thanks mathias,
    but i have already done, netstat -na |grep portnumber
    but nothing no port in range are set
    thanks howevar
    regards

  • MIgration of Progress Open Edge ver. 9.1 to Oracle 10g rel. 3

    I'm planning for a DB migration project. The application is MFG Pro EB2 and the database is Progress Open Edge 9.1. Can anyone help me confirm the version compatibility of Progress 9.1 with Oracle 10g, so far i've only i've only confirmed ver. 7. Need all the tech documents i can find to use as part of my justification. thanks in advance

    ... to Oracle 10g rel. 3It doesn't exist, afaik, the last is 10g release 2.
    Nicolas;

  • Suggested migration path for 10G rel 1 (90400) installation to 10.1.2.0.2?

    We are a heavy forms/reports shop. We have just gotten done installing 10G Rel 1 (9.0.4.0.0), and now that the latest version of the App Server has been released, I'm wondering what the suggested Migration Path should be? And whether there are any "must have" features that will make an appreciable difference in forms/reports. Or, should we just install the latest patchset for our 904 installation and be done with it?
    Thanks in advance.
    Phil McDermott

    Hmm... well, I'm going to be testing the forms/reports features of 10.1.2.0.2 just as soon as I get time, but what I'm hoping for most is that forms will work with SSO through the webcache. There is a bug in 9.0.4 that I'm aware of where SSO fails while working through the webcache. Oracle said they were working on the issue...
    ...anyone here know if Oracle fixed that bug? It may be a while before I'll have the time to play with 10.1.2.0.2.

  • Forms 10g rel 1( 9.0.4 ) vs SUN JVM 1.5

    Hello:
    From SUN site you can read :
    "Changes in 1.5.0_06
    The full internal version number for this update release is 1.5.0_06-b05 (where "b" means "build"). The external version number is 5.0u6.
    Security Enhancements
    Prior to this update, an applet or application could specify the version of the JRE on which it would run. This has changed. All applets are executed with the latest JRE version. Unsigned Java Web Start applications that specify a version other than the latest trigger a warning, requiring explicit user permission before the application will run. Signed Java Web start applications are not affected. "
    Assuming that our customer will use SUN JVM , NOT Oracle JInitiator.
    We have seen that if in a client machine it is installed SUN JVM 1.4.2_10 ( certified ) AND SUN JVM 1.5 or newer.
    there is NO WAY to force Forms 9.0.4 applications to run with SUN JVM 1.4.2_10.
    In spite of doing the following settings at formsweb.cfg
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_10
    when you run forms 9.0.4 applications from a browser in that machine, SUN JVM 1.5 is mandatory used by the browser.
    It seems that IT IS IMPOSSIBLE to tell 9.0.4 to use SUN JVM 1.4.2_10 because SUN prevents it according to the above documentation .
    Q1) I thank your comments on this
    Then, when you look for certification info:
    a) you can get this info for Forms 10g R2
    http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html
    b) you can get this info for Forms 10g R1
    http://www.oracle.com/technology/products/forms/htdocs/10g/clientsod_forms10g.ht
    ml
    Q2) What are ORACLE plans about certification of SUN JVM 1.5 AND Forms 10g Rel 1 ( 9.0.4 ) ?
    Thanks in advance,
    Fernando Rey

    Hi Guys,
    I am currently testing our portal with a number of JRE version or Jinitiator and the SUN JRE.
    I found some very useful information about changing the registry of the local PC to re-enable specific versioning, see info, below.
    I have tested this and it does work, but you need to be careful with Sun JRE versions to ensure that you are on 1.5.0.7 or higher.
    Another useful link is this discussion over on the sun forums.
    http://forum.java.sun.com/thread.jspa?threadID=730855
    Good Luck
    Scott
    We have found a conflict with the Sun JRE 1.4.2.6 and version Sun JRE 1.5.0.6
    To get around this conflict a registry key has to be added onto the users PC and the user needs to remove 1.5.0.6 and install 1.5.0.7 or higher. To make matters worse the auto-update feature in version 1.4, if left enabled, will update the user to 1.5.0.6 even thought the latest release from the sun web site is 1.5.0.8 !
    Therefore can you add this registry key onto the automated install of the Sun 1.4.2.6 setup as per the instructions below.
    Troubleshooting Conflicting JPI Versions on the Desktop:
    Per oracle note 368775.1, JRE 1.5 will not allow static versions. In other words version 1.5
    may override your required version of 1.4.2. They call it a security feature, but it can reek
    havoc with oracle forms. This section addresses a possible workaround.
    If your users either need to run JPI 1.5 for any reason, here is the workaround to force
    BANNER to use ONLY version 1.4.2.
    If you launch forms and in the java console it shows version 1.5.X, perform the following
    steps.
    1. Make a backup of the windows registry
    2. Edit the registry
    3. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\
    4. Create a new directory by highlighting the key above and pressing <RIGHT
    CLICK>/<NEW KEY>
    5. Rename the key to [Java Deployment]
    6. Highlight the new key created in step 5 and press <RIGHT CLICK>/<NEW KEY>
    7. Rename this new value to [Policy]
    8. Highlight the new key created in step 7 and press <RIGHT CLICK>/<NEW DWORD>
    9. Rename this DWORD to “EnableSecureStaticVersioning”
    Re-launch forms and verify via the java console that the desktop is returning 1.4.2.

  • OWB 10g Rel.2

    Hello,
    how can I integrate the Repository Browser into an Oracle Application Server. For the OWB 10g Rel.1 I find a Chapter in the Installation Guide. For Rel.2 there is no hint. Does anybody kno how to do this?
    Sven

    I also have been searching the docs for this...
    I don't want to give out the repository owner password to all that want to view execution reports. In 9.2 we deployed RAB to appserver and created the data source to hold the password.
    In 10G R2 I haven't been able to find a way to access the RAB without using the repository owner or control center owner password...
    If we can't deploy to an appserver, is there a way to give an OWB user the ability to see the reports so they can login as themselves?

  • Cannot install Oracle 10g rel. 2 on Win Server 2003 SB

    Hello,
    I cannot install Oracle 10g rel. 2 on Win Server 2003 SB, because when the the configuration assistant installer try to copy the db files, it stop with the following errors:
    ORA-24324 Service Handle not Initialized
    ORA-24323 Value not authorized
    ORA-28547 Connection to Server failed probable Oracle NET ADMIN errorRegards
    Siyavuş

    You should be connected as a local administrator to perform the install process.
    Try to perfom a software only install, then once you make sure the installation was successful, launch the dbca. It is important for you to use a local account to perform the installation and db setup process, otherwise, if you have authentication problems, even if you comment the authentication line at the sqlnet.ora file you will be facing issues that will make fail the assistant, since it is designed to work assuming the user is OS authenticated.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Installing Forms&Report  Services with Oracle Application Server 10g Rel 3

    Can I Install Forms & Report Services with Oracle Application Server 10g Release 3 some how?
    I am thinking of installing Forms & Reports Services in separate home with Oracle Application Server 10g Rel 3.
    Does any body has any different idea so that they both can run more smoothly together.
    Thanks
    Raj
    www.oraclebrains.com

    They WILL NOT RUN TOGETHER. We have discussed this many times before. They must be in separate homes.
    Check the search function for this forum to find the previous discussions.

Maybe you are looking for