Discoverer 4i Plus: Printing

I noticed the web version of Discoverer will print every page of your report. It doesn't allow the end user to control the column width, or specify which pages you want to print.
For now I ask my users to export to Excel to print out the reports. When will this be fixed?
I'm using Oracle Discoverer 4i Plus Release 4.1.43.07

I see that this is going to be fixed in a future release as an enhancement request 1677079. This was entered in March.

Similar Messages

  • Is there any way to print a photo from my iphone on plain paper on my photosmart plus printer?

    Whenever I try to use Airprint to print a photo from my iPhone to my Photosmart Plus printer, it tries to print it on photo paper from the photo paper tray.
    I want it to print on the plain paper in the regular tray.
    I read online where this is possible with the iPrint app - but when I went to the App Store, there is no iPrint App.  I found a sticky post here saying that it has been removed from the App Store in anticipation of a new ePrint Home & Business version that won't be available everywhere until September.
    So, in the meantime, is there anyway to change the location of where the photos from the iPhone print?
    Thanks in advance for any assistance.

    HI
    Most likely their is not, as printing pictures is standard set to photopaper as you most likely need good quality. Pictures on normal paper are not considered good quaity and thus not set as standard.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • [Solved] Hp-setup cannot find my HP Photosmart Plus printer

    Hi all,
    I'm trying to set up my HP Photosmart Plus printer. I have an Arch desktop acting as the CUPS server, which I ssh into from my laptop. I've gone through the CUPS installation and linux - linux sharing instructions. When I try to set up the printer through the CUPS web interface, it easily detects and adds my printer. I can access it from my laptop and print stuff fine. However, it will only print out:
    **** Unable to open the initial device, quitting.
    I discovered that the printer should instead be set up using hp-setup. Running hp-check -t gives this.
    Running hp-check --fix prompts to reinstall the printer through hp-setup, and so it removes the printer from CUPS and starts hp-setup -i.
    When I select "net" for the connection type (my printer is wireless), it can't find my printer, even though the standard CUPS interface had no problem with this.
    [?1034h
    [01mHP Linux Imaging and Printing System (ver. 3.12.11)[0m
    [01mPrinter/Fax Setup Utility ver. 9.0[0m
    Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
    | SELECT CONNECTION (I/O) TYPE |
    Num Connection Description
    Type
    0* usb Universal Serial Bus (USB)
    1 net Network/Ethernet/Wireless (direct connection or JetDirect)
    2 par Parallel Port (LPT:)
    [01m
    Enter number 0...2 for connection type (q=quit, enter=usb*) ? [0m
    Using connection type: net
    error: No device selected/specified or that supports this functionality.
    Here's a list of all the packages on the system, in case you're doubting that I forgot to install a particular dependency.
    If you need any more info, just tell me.
    Thanks!
    Last edited by Mindstormscreator (2012-12-18 21:55:23)

    So I tried connecting it through USB instead, and now I get these messages:
    Using queue name: Photosmart_Plus_B210
    Locating PPD file... Please wait.
    warning: No PPD found for model photosmart_plus_b210 using new algorithm. Trying old algorithm...
    Found PPD file: drv:///hp/hpcups.drv/hp-photosmart_plus_b210_series.ppd
    Enter a location description for this printer (q=quit) ?pool-room
    Enter additonal information or notes for this printer (q=quit) ?
    Adding print queue to CUPS:
    Device URI: hp:/usb/Photosmart_Plus_B210_series?serial=CN15V3250N05J9
    Queue name: Photosmart_Plus_B210
    PPD file: drv:///hp/hpcups.drv/hp-photosmart_plus_b210_series.ppd
    Location: pool-room
    Information:
    error: Printer queue setup failed. Please restart CUPS and try again.
    I've gone on a hunt for this ppd file before with no success. Does anyone know an absolute location to obtain it?

  • My Hp 8500a plus printer keeps saying it is offline and will not print. Was printing now stopped.

    I have an HP 8500a plus printer. Lately, when I go to print from Macbook or iPad, it tells me the printer is offline. My printer says it is connected to my wifi but will not print. Printer firmware is up to date. I have changed nothing, and now it will not print. Very frustrated and tired of spending all of this time trying to fix the printer just to print. This is my second HP printer this month and it works sometimes and doesn't work sometimes. 
    Am I missing something? I don't understand how it can print one day and not the next. 

    Try this if it is an Airprint Printer.
    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • Discoverer 4i Plus returns no data when using views with db link references

    I am using Discoverer 41 Plus to view reports online.
    When I create a worksheet based on a view, that only references local tables, everything is OK and Disco plus shows the output OK.
    When I create a worksheet based on a view, that references a Database link, Disco plus gives me an "Query caused no data to be returned" error.
    Is this to be expected from Discoverer Plus?
    Thanks - Sue.

    I'm wondering if this has anything to do with the default position (and default aggregate) for the EUL folder item? I can see that some of the folders have number type items with default position 'Data Point' and others have these with default position of 'Top or Side'. I'm totally stabbing around in the dark here; looking at EUL folders which exhibit the problem and those which don't.
    I've tried changing one field to 'Data Point' and it hasn't helped. Will try changing the join items now I think.
    If anyone has any comments, would be v. grateful as I'm looking at dropping folders which have quite a bit of code around them and trying to re-create them exactly, which is a risky and horrible solution.

  • How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    Thank you for this link! Actually I installed a brand new Windows 8 system in January 2014 and then bought the HP Officejet Pro 8600 Plus printer a few days later. To install this printer I did not use the CD that came with it but already used this link. Just to be sure that I have the latest version I again reinstalled the driver. The result is definitive: You cannot print common photo paper sizes like 4x6,  5x7, 8x10, etc. via a PC using photo SW like HP Photo Creations, MS Gallery, Windows Photo Viewer or any other SW on a HP Officejet Pro 8600 Plus. The reason is most likely that HP marketing decided that an Officejet should not be smart enough for photos, after all the company sells also Photosmarts. Because you cannot create your own formats  you are limited by the driver to what is typically available in an office, in this case:  A4, Letter, legal, Statement, Executive, A4, A5, A6, B54 (JIS), Envelopes #10-DL-C5-C6-A2-Monarch, Japanese Postcard, Japanese Envelope Chou #3-#4, L, 2L, O**bleep**u hagaki, Index Card Letter-A4, Edge-to-Edge Letter-A4, Env. Japanese No 3-No 4 and that's it, not more. Thank you anyway for trying to help me but in this case only the SW developers in HP can help.It would be great to be able to print from time to time a 4x6 photo on this printer like I would do.Copying photos on a USB stick or on a SD card first and then use this way to print on the printer is too cumbersome for me.

  • I have Windows 7 Operating system and an HP 6500 A Plus printer.  My iPad no longer prints wirelessly. An error message says the printer is offline.  Suggestions

    I have Windows 7 Operating system and an HP 6500 A Plus printer.  My iPad no longer prints wirelessly. An error message says the printer is offline.  Suggestions?

    1. Turn off router, printer and iPad
    2. Turn on router and wait 30 seconds
    3. Turn on printer and wait 30 seconds
    4. Turn on iPad and test printing

  • HP Laserjet 4 Plus printer driver

    I need a compatible printer driver for HP Laserjet 4 Plus printer.  I have Windows 7 - 64 bit.

    The Laserjet 4 Plus driver is supplied through Windows Update for Windows 7.  You can do the following:  click Start, Devices and Printers, Add a Printer, select the correct port, Next, then select Windows Update, then select HP as the manufacturer and select the Laserjet 4 Plus.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP LASERJET 1020 PLUS PRINTER PRINTING PROBLEM

    HI.
    I AM RAJA PAUL FROM INDIA, I HAVE A HP LASERJET 1020 PLUS PRINTER , NOW A DAYS   I AM FACE ING A PROBLEM , WHEN I AM GOING TO PRINT FROM THIS PRINTER , EVERY TIME PRITING LETEER SHOW  Distorted characters. WHAT I DO?   

    Hi @rajahp ,
    I see by your post that the printer is printing distorted characters. Thanks for providing the screen shot. I can help you.
    It looks like a issue with the toner or possible a hardware issue with the printer or fuser.
    Inspect the toner cartridge for damage:
    1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
    2. Check the memory chip for damage.
    3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
    Fingerprints on the imaging drum can cause print-quality problems.
    4. If you see any scratches, fingerprints, toner on the drum or other damage on the imaging drum, replace the toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
    I have provided a document for cleaning inside the printer and running a cleaning page, resetting the printer and checking the driver settings. Resolving Print Quality Issues.
    Try printing a document again.
    Let me know the results.
    What kind of paper are you using?
    Try another type of paper to see if you have the same results.
    Are you using Genuine HP Toner?
    What is the toner level?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP 1055cm plus printing issue

    Just installed Adobe X.  What are the optimal settings to print using an HP 1055cm plus printer with 36" roll paper to print architectual drawings?

    Hi Mageegs,
    Welcome to the HP Forums!
    I understand that you can print all types of documents except for word documents with your HP Deskjet 1510, and I am happy to help you with this issue!
    Please take a look at this website. How to troubleshoot printing problems in Word.
    Otherwise, please contact Microsoft Support, since everything else is printing okay.
    Hope this helps you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd

    My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
    I have entered the password several times and I know what I have entered is correct

    Hi @Southglen,
    Welcome to the HP Forums!
    I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
    I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
    I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
    After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
    Let's start with these steps, and we will go from there!     
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My HP Officejet pro 8600 plus printer is locked

    My HP Officejet pro 8600 plus printer is locked and is offline how do I unlock it because I'm in big trouble.

    I had the same problem, HP kept telling me it was my wireless network. But I had paddle locks on my wireless on the printer it self. We finally figured it out.  I will try to explain as best that I can. If your looking at the printer, down to the left of the window, press several times just outside the printer window, until it wakes up.  Scoll with arrow keys > to the right until you come to the Enable /unenable the wireless. Press up/down arrows to come to the Enable window and reset it from there.  I hope I explained this wwell enough to do it on your own. Just to let you know when you are pushing to the left of the window quickly to get it started, you are not pushing any visable button, just keep pushing and will open up in the window.  Good Luck

  • How do i send photo from ipad to my hp 6500a plus printer using eprint app?

    how do i  send photo from ipad to my hp 6500a plus printer using eprint  app?

    Hi,
    Have you read this ?
       http://www.apple.com/support/ipad/assistant/airprint/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Officejet Pro 8600 plus Printer

    I have just purchased the Officejet Pro 8600 plus Printer & installed it with no problems but it won't connect to the internet/web services? It is connected to my home network & will print etc. but when I try to activate the internet as directed, it searches for a while with 'Enabling Web Services (ePrint & Apps)' on the screen & then reads 'Web Services (ePrint & Apps) could not be enabled'. 
    When I tried to activate the web service during instalation, the page read that if it did not activate I would be directed to a page to download necessary drivers but this never happened & the only thing I could do was to select the 'Next' button which completed the installion without the internet/web service working.
    Does anyone know of this issue & if so, can you please tell me how to connect my printer to the internet. 
    This question was solved.
    View Solution.

    That is great to hear Roses66. If you could mark my previous post with the 'Accept As Solution" it will help others in this community to find our conversation easier.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Officejet Pro 8600 Plus prints part of page and quits

    My brahd-new Officejet Pro 8600 Plus prints part of page and quits.  The manual said to clean the print heads and align the printer.  I did both of those.  It made the problem worse.   I'm printing on photo paper - HP Premium Plus.  It happens about 1/2 the time. 

    Hi beantowner2,
    I would like to begin with a few questions,
    Does this happen when you copy a photo, or only when you print form the computer?
    Do you have the printer connected directly to a wall outlet or a surge protector?
    What operating system and version is on the computer?
    Is the printer connected to the computer with a USB cable or wirelessly?
    If you have a WIndows operating system please download and install the latest firmware version for the printer. HP Officejet Pro 8600 N911g_n Firmware.
    If you are using a surge protector, I suggest disconnecting and connecting the power directly to a wall outlet.
    Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see,
    ISSUE:
    Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    This is not limited to Laserjet printers.
    I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for