Discoverer Administrator crashes

We have installed the new version of Administrator version 10.1.2.00.00, client version 10.1.2.45.46c but are finding this version keeps crashing as we try to build a new EUL, the most common messages we get are 'Internal application error' or 'Internal EUL error'.
I have found a previous post referring to Administrator crashing when there is more than one person logged into the EUL, even when one is just browsing; however, we are finding the application crashes even when only one person is logged in.
We do also have previous versions installed on our PC i.e. 3.1 and 10g (9.0.4) but this shouldn't be a problem should it as they are in separate Oracle homes?
Thanks for any help you can provide.

Hi,
I cancelled the import and then tried importing again, this time with the last option : "Refresh existing objects (Preserve display related properties)"
This time, it didnot create new identifiers for the newly created objects, but actually replaced the old ones.
And then the error is gone, while retaining the existing folders,item classes.
The issue is fixed, I dont get any error for the new folders but, the error still exists for the old folders and I cannot delete the folders. I am getting error :
"Internal EUL Error: DestroyFailure - Failed to destroy EUL element"
So the EUL is not clean..how can I delete the folders ?
Thanks!
Yogini
Message was edited by:
Yogini

Similar Messages

Insert hierarchy error on discoverer Administrator (dis51adm.exe)

Every time I try to insert a new hierarchy, discoverer crashes. These are the versions of my installed software:
*Oracle9i Discoverer Administrator - 9.0.2.00.00
*Discoverer Administrator Client - 9.0.2.39.01
*End User Layer Library - 9.0.2.39.01
*End User Layer - 5.0.0.0.0.0
*Oracle 9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production.
Any ideas?
Regards,
Andre

Hi,
1. Discoverer 9.0.2 is desupported
2. You are on the base release 9.0.2.39, you may want to try to be on the terminal release patch (9.0.2.54.10) if you cannot migrate immediately to 10g (10.1.2.0.2)
Here is a reference for you:
Note.237607.1 ALERT: Required and Recommended Patch Levels For All Discoverer Versions
Hope that helps.

How to get the Report Names which use a Folder in Discoverer Administrator?

Hello All,
How could I get which Reports in discoverer Desktop are using a particular folder in Discoverer Administrator?
Or
How to know which Discoverer Desktop Reports are being derived from a folder in Discoverer Administrator?
We have Oracle 9i DS installed and have a Custom Folder Created in the Administrator, and want to know exactly which Reports/Workbooks are using that folder?
Thanks in advance :)

Well Abhijit,
The eul workbooks have been created by oracle specifically to analyze your eul and make your work easier!. So, I prefer this way to view the information about my eul in a report format in the desktop. Try it! you may like it.
If you want you can follow these steps:
Run the script called eul5.sql located in <discoverer_installation_path>\discoverer\util in the user who own the eul in the database.
Then import the eul5.eex file located at <discoverer_installation_path>\discoverer\ in the discoverer administrator.
Then login into desktop and open the reports in the database, you can see a report called[b] EUL Workbook Management. Open that and goto the sheet named Workbook Dependency - Folders & Items Lookup. I think it the last but one worksheet in that workbook.
Hope it helps you!

Creation of a Custom Folder in Oracle Discoverer Administration Edition

Hi
Could anybody help me in solving this problem while creating a Custom Folder in Oracle Discoverer Administration Edition ?
My Requirement is :
I Connect to EUL_US/EUL_US@<HOST_STRING> under Oracle Discoverer Administration Edition.
I selected a Pre-Defined Business Area Eg. General Ledger
There i created a Custom Folder by Name Test Custom Folder
The Query which i used in my Custom Folder is
SELECT NAME FROM GL.GL_JE_BATCHES
When i Used this Query it says Table or view does not exist.
The Folder is getting created but without a Query.
I am not able to preceed further.
Any Help would be appreciated
Regards
Nakul Venkataraman

Hi Nakul, you may be running into a problem with the sql for your custom folder. For some reason Discoverer Admin will allow you to create a custom folder with sql, but then if you change it and it has any advanced sql, i.e. grouping sets, analytic functions etc., you probably receive an error.
An option is to create a view using the same sql and create a folder from the database using this view.
Hope this helps.
Brent.

Discoverer Administrator 11.1.1.3.0 EUL Export Doesn't Export All Functions

Using Discoverer Administrator 11.1.3.0 against an Apps EUL. Logged in with an Apps User ID with administrator privileges. When I export the EUL using File | Export "The entire End User Layer", I am shown all of the objects that will be exported. Everything is listed, including all of the registered functions.
However, when the export completes and I am shown a list of the objects exported, the only registered function shown as being exported is END_OF_TIME. Checking the export file verifies that this indeed is the only function definition that was exported.
If I start the export again -- logged in as the same user -- and choose "Selected objects in the End User Layer" , choose "Functions", and select all of the registered functions, they ARE all exported.
Why is this happening?

Try
https://hostname:8090/discoverer/viewer
https://hostname:8090/discoverer/plus

How to start Discoverer Administrator on Applications 11i Installation

Hi all,
I have Oracle EBS 11i installed and i want to know how to start Discoverer Administrator on this installation? It's is on a Linux Machine.
Tks,
Paulo.

Hi,
Discoverer Administrator is part of the Oracle Developer Suite and is a windows product that must be installed separately on a windows workstation.
Rod West

What privileges should be grant to Discoverer Administrator

Hello,
We are going to install Discoverer 4i to access our 10g database. What privileges do I need to grant to the Discoverer Administrator? Thank you.

Hi,
At the very least the Discoverer Administrator should have Administration privileges with Format Business Area, Create/Edit Business Area and Set Privilege. This can be given directly to the user or through a role/responsibility.
Hope that helps,
Rod West

Refresh EUL in Oracle Discoverer Administrator using command line

Hi there! I wonder if there is a way of refreshing the EUL business folders of Discoverer Administrator using a command line, so that it could be done through a batch file process.
Many thanks in advance

What do you mean by refreshing the EUL business folders? The definitions of the EUL are updated whenever a workbook/worksheet/business area/hierarchy/ any other object inside the EUL is changed/added/deleted. Also, the contents of your EUL are updated whenever summaries are refreshed (either manually or on a schedule), or when scheduled workbooks run and their contents stored inside the EUL.
Thanks
Abhinav Agarwal
Oracle Business Intelligence Product Management

Oracle Discoverer Administrator 'OUT OF MEMORY'

Hi ,
I'm trying to include a case statement in the custom folder based on a query.when I include the case statement in the SQL query and click Validate SQL button i get error 'out of memory'.
can anyone plz help me with this.
thanks

Hi
The Out of Memory is not 100% related to the amount of memory you have on your machine. There is an internal cache that it is working with and this is controlled from within your system registry. These settings can be found in [HKEY_CURRENT_USER]\Software\Oracle\Discoverer 10\Application and they are called MaxVirtualDiskMem and MaxVirtualHeapMem and these are typically set to the amount of memory on your PC or even higher where 512000000 equates to 500 MB. I have rarely seen making a change to these have any impact but you can always try.
As a test, try using the Admin command line interface to do what you want. I have seen exports, as mentioned by Russ, fail using the application but work just fine when called from the command line.
You seem to be saying when you run the query yet in your question you say running in Discoverer Administrator. You cannot run a query in Administrator so are you saying that you get this issue when running the query in Desktop or in Plus? For Desktop you can try altering the MaxVirtualDiskMem and MaxVirtualHeapMem, whereas for Plus these will have to be changed in the pref.txt for the application server.
You can also try increang
Best wishes
Michael

HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g

Hi,
My question is HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g. I know how to connect PLUS and VIEWER using a URL. Do i need to install Discoverer Admin. separately on my local machine.
This is very urgent... Please reply.
Thanks in advance for your time and answers.
Jay

Discoverer Administrator is a client side tool, you must install it on your machine or even you can install discoverer administrator in your server but you must connect through a connection string which you must enter in your tnsnames
regards

Refresjh Portlets and Discoverer Administrator

hi
anybody can tell me why my discoverer portlets don't refresh (gauge portlets)
if i make some changes in the parameters, (colors, size, etc) my portlets after update don´t change anything.
If i publish a workbook i have the same problem with display of rows.... if in my publishing i defined 7 rows and in portal i want to see 10 rows, don't refresh...but if i click in the next 7 rows the refresh works fine.
I don't know what happen? the last week all worked ok... i really don't understand, i don't move anything in the configuration...
I've checked my business area in Discoverer Administrator and dont update any change in my database... i think its an infrastructure problem... any idea...
I will apprecciate your help
Thanx
ALex

Try
https://hostname:8090/discoverer/viewer
https://hostname:8090/discoverer/plus

Error with Discoverer ADministrator connection

Hello:
I´m working with IAS and Discoverer 10g R2.(the discoverer installation is in another Server)
My problem is that i can't connect to Database with Discoverer Administrator because i have the error ORA.12170 of timeout.
But if try to connect me for SQL*PLUS i dont have any problem.
If i try with tnsping i get the same error message.
C:\ora10_bi\opmn\bin>tnsping BDINFRA.aplicativo.com
TNS Ping Utility for 32-bit Windows: Version 10.1.0.3.0 - Production on 29-AGO-2
005 17:53:34
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Archivos de parßmetros utilizados:
C:\ora10_bitools\network\admin\sqlnet.ora
Adaptador EZCONNECT utilizado para resolver el alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=BDINFRA.aplicativ
o.com))(ADDRESS=(PROTOCOL=TCP)(HOST=216.187.103.170)(PORT=1521)))
TNS-12535: TNS:timeout de la operacion
My host don´t have the ip 216.187.103.170 and i don´t understan why the connection try to connect with the adpater EZCONNECT define in my sqlnet file.
My tnsnames are:
discoverer installation.
BDINFRA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = aplicativo)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bdinfra.aplicativo.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
infraestructure instalation
BDINFRA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = aplicativo)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bdinfra.aplicativo.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
How can i solve this problem?
Thank you.

Check the firewall settings on your server. Make sure that port 1521 is not blocked.

Oracle Discoverer Administrator 11g

Hi All,
I want connect Oracle Discoverer Administartor 11g, so please hel[ me where can I download Oracle Discoverer Administrator 11g for Windows version.
i am able to find oracle doscoverer administrato 10 but not able find 11g software.
Please suggest.
Regards,
Prasad

Hi,
Did you check this http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Look for Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0
http://download.oracle.com/otn/nt/middleware/11g/ofm_disco_desktop_win_11.1.1.3.0_disk1_1of1.zip
Thanks,
Sutirtha

BI Discoverer Administrator tool

Hi all,
We have Discoverer 10g AS (10.1.2) on AIX, integrated with our 11i ebs.
I need to install Oracle BI Discoverer Administrator tool on windows machine (windows 7 professional).
I tried to search for any download (in oracle download site also) but no luck, and I don't have media for the same.
Is there any link to donwload the same ?????
Thanks in ADV

Hi,
It is part of "Oracle Business Intelligence Tools 10g" which can be downloaded from:
Oracle Business Intelligence Tools 10g (10.1.2.0.2) for Microsoft Windows
http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html
Note: 395820.1 - Is There a Software Download For the Full Discoverer Administrator/Desktop 10g (10.1.2.48.18) Release?
Note: 1111911.1 - Where / How to Download Discoverer Administration/Desktop 10g Edition Software on OTN
Note: 743947.1 - How to download software for Discoverer Plus and Viewer 10g 10.1.2.0.2
For installing this software on Windows 7, please see (How To Find Oracle BI Discoverer 10g and 11g Certification Information [ID 233047.1] -- How To Find Oracle BI Discoverer 10g and 11g Certification Information [ID 233047.1]).
Thanks,
Hussein

What option to select to install "Discoverer Administrator"

Hi, I installed Infrastructure 10g. Then I installed Business Intelligence and selected two options, discoverer and report services. Now, I cannot have "Discoverer Administrator" option in the Start Menu. I have Plus and Viewer working.
Pls tell me which option I need to select in order to have "Discoverer Administrator" in My PC.
Or tell me what I should keep in mind while installation so that I can have "Discoverer Administrator".

Hello
You need to download and install Discoverer 10g Developer Suite in order to use the Admin edition. So far you have only installed the web components.
Click here for the download page:
http://www.oracle.com/technology/software/products/ids/index.html
and pick the version you need.
Best wishes
Michael

Discoverer Administrator crashes

Similar Messages

Maybe you are looking for