Discoverer and OBIEE configured on same weblogic server

Can Oracle BI Discoverer 11G and OBIEE 11G be configured on the same weblogic server?

Did you mean the same weblogic server instance?
Most likely, what you can do is to install those 2 components as independent server instances and keep those under the same domain. Each would require 4GB of available memory (physical + swap).
Thanks.

Similar Messages

Sizing of Oracle IdentityManager and Access Manager on same Weblogic Server

Hi ,
We are planning to deploy Oracle Identity Manager and Access Manager on the same weblogic server in different domains.We have user base of 25000 users.
We can propose two different weblogic servers for OIM and OAM ?
Please let me know the best hardware and software requirements for this installation.
Thanks,
RBM

Here is sizing guide for Oracle Identity Manager
http://www.oracle.com/technetwork/middleware/id-mgmt/oim11g-sizingguide-194346.pdf
You can use it as a guideline, and it refers to 25000 users similar to your requirement. There are other factors also consider like, failover, performance etc. Feel free to reach out if you need more info [email protected]

Win7 64-bit Forms 11.1.2.0 and JDeveloper 11.1.1.6 use same weblogic server

Trying to make JDev 11.1.1.6 and Forms 11.1.2.0 use same weblogic server on Win 7 64-bit.
Installed JDeveloper 11.1.1.6 studio generic. This installs a 32-bit JDK and weblogic 10.3.5. (Oracle, Why doesnt forms installer install weblogic like JDev does?)
Installed 64-bit JDK 1.6.0_24
Configured JDeveloper 11.1.1.6 and Weblogic 10.3.5 for 64 bit and to use new 64-bit JDK. Works great.
Started up Oracle forms and reports installer and see that it wants to use all the defaults paths of JDevelopers Weblogic server - nice.
However, I dont see a way to tell the forms installer the new path of the 64-bit JDK. The forms installer sees the older unused JDeveloper 32-bit JVM and complains.
Like I said.. trying to use same weblogic server and not install two weblogic servers.
Any ideas?

This problem is caused by a Bug
Bug 12669780: SUBVERSION "CONNECTION" FAILING FOR PROTOCOL SVN+SSH IN JDEV 11.1.2.0.0
A patch is expected to be delivered soon

How can I configuration MBean in weblogic server using the console ?

How can I configuration MBean in weblogic server using the console ?
I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
can some body explain that or a link that explain it, how to do it on the console ?

Hi,
Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
Thanks
Jay SenSharma

Cannot configure JAAS in weblogic server 10

Hi,
I am new to weblogic and at present am using weblogic server 10. Can anyone please specify the steps to configure my custom JAAS module in weblogic?
Thanks
Surya

While still using PAPI, try also adding b1oracle.jar, b1base.jar and b1util.jar to your ADF project.
These jars could be found from your BPM Studio installation.
HTH

Install Discoverer AND Portal in the same Middletier Instance

Hallo,
when installing AS 10.1.2 i have several install options.
When choosing BI / Discoverer i have no Portal in the middletier after the installation finished.
I could install another middletier instance with using the portal option but i want to have Portal installed as component in the existing middletier.
How can i achive this ? (install a single componant into an existing middletier)
Thanks,
Jochen

You cannot do that. You have to do a fresh install of 10.1.2.0.2 and choose Business Intelligence and Forms install type. This install type provides you the ability to install both Discoverer and Portal in the same Oracle Home. Seems like you installed Discoverer from BI CD, which gives you the ability to just install Discoverer. Instead use the EE download or Oracle Application Server main CDs from the CD pack.
Regards
Pavna

Can we install Oracle 8i and 10g on the same windows server?

I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
Forgive me if this question is already asked.
Thanks in advance!
Jay.

WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

How to use both ojdbc14.jar and ojdbc6.jar in same weblogic domain(weblogic12C)

Hi all,
I 'm having issue of using both ojdbc14.jar and ojdbc6.jar in same weblogic application and same weblogic domain in weblogic 12C environment.
how can i do that?
i'm currently having application developed using jdk 1.6 and ojdbc6.jar, application developed using jdk 1.4 and ojdbc14.jar.both are currently installed at same domain.
i want to use the both ojdbc14.jar and ojdbc6.jar in same domain.
what i previously did was renaming /usr/weblogic/wls_server10.3.4/lib/ojdbc6.jar to /usr/weblogic/wls_server10.3.4/lib/ojdbc6.jar.bak and put ojdbc14.jar in the same path when i wanna use ojdbc14.jar.
i haven't use both in same environment before, but to go live i wanna match about requirement.pls help.
i know the way use this by having two domains, but in the same domain i could not find a solution yet.
Please help

Hey
I have the similar requirement.. Did you managed to get an option of doing it? If yes, please provide some insights
Thanks in Advance

OLTP and OLAP databases on same SQL Server?

Would you put OLTP and OLAP databases on same SQL Server or separate?
I realize the ideal would be separate, but that means 2 expensive licenses instead of 1. Most of our OLTP stuff happens during the day while OLTP processing happens at night (so good use of resources) if just 1 server. Also, the disks that hold
the files could have different allocations (small chunks for the OLTP disks, large for the OLAP disks). Also, by being on the same database server, the OLTP data is immediately accessible for processing into the warehouse.
Or, is it just a cardinal rule to never mix the two worlds as server completely different purposes?
Thanks.

Answer given in simillar below thread would help you for sure:
MSDN Forum:
Is keeping your OLAP and OLTP databases on the same server is considered bad practice?
-Vaibhav Chaudhari

Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2

Hi,
Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2.Please give me the steps to configure the LDAP in weblogic 10.3.2.

Hi,
You can check http://download.oracle.com/docs/cd/E15523_01/doc.1111/e14142/console.htm#i1075285

Install Forms and Reports builder 11g without WebLogic Server

Hello Everybody,
Presently to install Forms and Reports builder 11g on a PC for developers, we need to install WebLogic Server prior to that.
For this, we need lot of resources. Hardware, to download big software bundles, memory resources, etc...
If we have a solution like *"Forms and Reports builder 11g and its tools as stand-alone distribution from Fusion Middleware technologies"* ........ no words from me.
Do you have a solution to install Forms and Reports Builder 11g without WebLogic Server?
Regards
murali krishna

hi
check out the following link.
Forms/Reports 11g Builder without WebLogic
sarah

Difference between Discoverer and OBIEE and BI certification

Hello,
I want to know what is the major difference between Oracle BI discoverer and OBIEE as both are BI products. I also appreciate, if some body tell me the career paths and training of the Oracle BI products in both Administration and developer mode.
Is there any career paths in Discoverer, I went to Oracle certification page and for BI I found Sibel Certification. What is the major difference between Sibel technology and other BI products.
Kindly help me in this as You advice may led my future.
Regards,
Abbasi

Abbasi,
Well, I will take a stab at trying to answer all of your questions. Difficult to take a complex topic and talk about it in a few sentences.
Siebel is a software company that Oracle recently purchased. Google for "Siebel Systems" and look at the Wikipedia entry for more information about the original company. Siebel was focused on customer relationship management (CRM) software. So think sales and marketing. I would not really consider Siebel a true business intelligence software package, but it certainly can be considered to fall under the business intelligence area. Siebel would be a focused solution, just on CRM. Since we have no interest in Siebel here, I don't know how Oracle might end up integrating Siebel into its overall business intelligence solution. A lot of companies use the Siebel CRM software, but whether that is a viable for a long term career, I don't know. You are probably better off with a wider focus BI product to work with, long term, is what I am thinking. But that is a personal opinion.
Discoverer and OBIEE? Boy, how to best explain this? Think of Discoverer as like a Generation 1 business intelligence product. Think of OBIEE as like a Generation 2 business intelligence product. My suspicion is that Oracle will no longer put much time and money into enhancing Discoverer going forward. What you see today with Discoverer is probably what you will get. OBIEE is Oracle's stated direction for business intelligence. So if you are looking long term, OBIEE is the way to go. It is much more complex than Discoverer. It is much more expensive than Discoverer. It takes a lot longer to implement than Discoverer. There may be more Oracle customers today running Discoverer than OBIEE (I don't know for sure - just speculation on my part), but long term Discoverer is going to fade away and OBIEE will become the dominant Oracle BI solution.
So if I was just starting out in a career, in my opinion, OBIEE is what I want to focus on. Would not hurt to learn Siebel and Discoverer, but OBIEE is the way of the future.
Hope this helps a bit.
John Dickey

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Internal and External Portals be hosted & Configured on Same Portal server?

Hi Experts,
Is it possible to host and configure the Internal portal and External Portal on the same portal server?
If yes, kindly provide the inputs.
We have a scenario wherein we have to use the same portal server for both kinds of users (Internal as well as External).
We want to provide separate URLs for both the portals and the datasource for the users management would be different for both the scenarios.
The user managemnet in case of Internal Portal has to be authenticated to an AD server whereas in case of External Portal the user management would be taken care by UME.
Please suggest and share some docs if possible.
Thanks & Regards,
Anurag

Hi,
Can we customise the Portal logon page for both the portals differently?
I've already customised the portal logon page by modifying the UME properties in the Config Tool but that was done keeping in mind the External Portal users. Now, we want to customise the page for Intranet users but with different options at the logon page.
How can we achieve this functionality as any property that we modify in either VA or Config Tool will affect both types of portal pages.
For an eg. we have a Self Registration link for the external users which we do not want for the Intranet users. How is this possible?
If we design a webdynpro java application for the logon page and for authentication purpose, can we call a home page iview on successful authentication?
And with this customised webdynpro java application, can we connect to the AD server for the user authentication?
Best Regards,
Anurag

ACE 4700 configuring SSL termination weblogic server 10.3.6

Hello,
Im trying to configure an ACE 4700 so that SSL termination is done on the ACE and HTTP reaches the weblogic server instance.
I have a working setup of a Apache reverse proxy doing SSL offloading and using a weblogic module and that works fine
Was reading http://docs.oracle.com/cd/E23943_01/web.1111/e13709/load_balancing.htm#i1045186
Can anyone point me to a working config example for doing this with the ACE4700 or give me some directions here?
Kind regards,
Laurens

Hi Laurens,
Here is a basic configuration for SSL termination:
rserver host test
ip address 10.198.16.98
inservice
rserver host test2
ip address 10.198.16.93
inservice
serverfarm host test
rserver test 80
    inservice
rserver test2 80
    inservice
ssl-proxy service TEST
key cert
cert cert
class-map match-all VIPSSL
2 match virtual-address 10.198.16.122 tcp eq https
policy-map type loadbalance first-match test
class class-default
    serverfarm test
policy-map multi-match clients
class VIPSSL
    loadbalance vip inservice
    loadbalance policy test
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 112
    ssl-proxy server TEST
interface vlan 112
ip address 10.198.16.91 255.255.255.192
access-group input Allow_Access
nat-pool 1 10.198.16.122 10.198.16.122 netmask 255.255.255.192 pat
service-policy input NSS_MGMT
service-policy input clients
no shutdown
Cesar R
ANS Team

Discoverer and OBIEE configured on same weblogic server

Similar Messages

Maybe you are looking for