Discoverer and potential need for IDS

I am reviewing 10g Application Server Enterprise Edition, as I've a need for Oracle Reports and Portal to distribute the reports company wide. In the search I became aware that Discoverer was also included with this bundle. And the features are quite an upgrade to those available with Reports.
So here is the question, I've been informed that in order to utalize Discoverer one also needs the features available within the Internet Developer Suite else Discoverer is not usable.
So I went off to research, just what it is that IDS provides that Discoverer "needs". But thought I would post here and ask the community for a summary of why IDS is needed, while I read the white papers.
Any help would be greatly appreciated.
Adam

Ahh, here we are:
1.4 What is Oracle Discoverer Administrator?
Discoverer Administrator is used for the initial setup and ongoing maintenance of the End User Layer. Users of Discoverer Administrator are called Discoverer managers. The Discoverer manager performs a variety of tasks including creation and maintenance of business areas, folders, summary table creation, and managing end user access. Discoverer provides extensive defaulting capability to enable managers to rapidly implement their end user environment. Discoverer Administrator is a required component of a complete Discoverer installation and is a component of Oracle Developer Suite
So in order to use Discoverer, which is included within 10g AS Enterprise Edition one also needs a seperate liscence for Oracle Developer Suite.

Similar Messages

  • Performing check and potential update for status control table

    Cheers Experts,
    I searched in the forum, but I didn't find an answer.
    I'm working on a 3.0B BW system.
    After updating from PSA to an ODS, in the log I see the following line:
    "Performing check and potential update for status control table" and double clicking on it, it says:
    If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in  the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
    This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
    The system now analyzes the requests in the Cube and compares the calculated status with the status table.
    If deviations from the status table arise then you are given the option of adjusting the status table.                                         
    I have 2 questions:
    1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
    2) What can I do to reduce its execution time, since it lasts several minutes?
    Thanks and greetings.
    Roberto

    Roberto, did you ever find an answer to your question?  We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

  • Are there any issues and potential solutions for large scale partitioning?

    I am looking at a scenario that a careful and "optimised" design has been made for a system. However, It is still resulted in thousands of entities/tables due to the complex business requirements. The option of partitions must also be investigated due to large amount of data in each table. It could potentially result in thousands partitions on thousands tables, if not more.
    Also assume that powerful computers, such as SPARC M9000, can be employed under such a scenario.
    Keen to hear what your comments are. It will be helpful if you can back up your statements with evidence and keep in the context of this scenario.

    I did see your other thread, but kept away from it because it seemed to be getting a bit heated. Some points I did notice:
    People suggested that a design involving "thousands" of entities must be bad. This is neither true not nor unusual. An EBS database may have fifty to a hundred thousand entities, no problem. It is not good or bad, just necessary.
    The discussion of "how many partitions" got stuck on whether Oracle really can support thousand of partitions per table. Of course it can - though you may find case studies that if you go over twenty or thirty thousand for a table, performance may degrade (shared pool issues, if I remember correctly).
    There was discussion of how many partitions anyone needs, with people suggesting "not many". Well, if you range partition per hour with 16 hash sub-partitions (not unreasonable in, for example, a telephone system) you have 384 per day which build up quite quickly unless you merge them.
    You own situation has never been fully defined. A few hundred million rows in a few TB is not unusual at all. But when you say "I don't have a specific problem to solve" alarm bells ring: you are trying to solve a problem that does not exist? If you get partitioning right, the benefits can be huge; get it wrong, and it can be a disaster. Don't do it just because you can.  You need to identify a problem and prove, mathematically, that your chosen partitioning strategy will fix it.
    John Watson
    Oracle Certified Master DBA

  • I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

    I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

    I know that it will increase my wireless coverage in my house but will it increase the speeds?
    Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
    If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
    If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

  • What are the BP and BF need for E- Recruitment configuration?

    Dear All,
    We are going to implement E-Recruitment.
    System is ECC6,  EHP6 and portal 7.3
    Client is Indian
    We are going to deploy below Business Packages in portal.
    BP Recruiter
    BP Recruiter Administrator
    We are going to activate below Business Functions in ECC.
    HCM_ERC_CI_1
    HCM_ERC_CI_2
    HCM_ERC_CI_3
    HCM_ERC_CI_4
    Are there any other to deploy BP and activate BF?
    Please guide me on this.
    Regards
    Anoku

    Hi Anoku,
    Please check the prerequisites for the business functions. You can find the documentation regarding the business functions in transaction SFW5.
    For example: Starting from HCM_ERC_CI_2, you will need to activate HCM_ERC_SES_1 as a prereq.
    Keep in mind: You only need to activate the business functions which bring you the functionality you need.
    Regards,
    Luk

  • SQLPlus and SQLLoader needed for Sparc Solaris 2.6

    Hello,
    for a test i need the two Oracle utilities SQLPlus and SQLLoader
    for Sparc Solaris 2.6.
    Is there a test version available ???
    Thanks for information.
    Olaf.
    null

    hai Alan,
    Let me specific on the problem.
    I developed a fail-over software for Linux servers(need 2 servers of same configuration). In this servers ,there are two modes , Active and passive mode. At a time one can be active,and other passive. Clients can communicate the with the servers through a common alias ip address. But the actual ip address of servers can be different.Normally Active server would be having the alias ip.
    When switching take place from active to passive mode,server will be assigned with its actual ip address. When switching takes place other passive server becomes active and its get common alias ip address.?
    This is the actual scenario . And fake is used in Linux to refresh the arp table of immediate switching device.
    But i came to know that solaris os would do it normally when it switches .?
    Is this possible with solaris.?

  • Dimension and Facts need for telecommunication industry

    Hi All,
    I am preparing a raw datamodel for a telecommunication client. I would like have ur inputs on what all dimension i can have and fact for the following subjetcs.
    1.Customer Retention
    2.Customer Profiling and Se4gmentation
    3.Customer Care
    4.Campaign Management
    5.Forecasting and Service Planning
    6.Product Profitability
    I need help to form a raw data model. Pls help me out. looking forward to hear from u all.
    Regards
    Natesh

    The issue is resolved

  • Question about Photoshop Premier and the need for coreaudio.dll drivers

    I downloaded Photoshop Premier Elements. When I run the video edit part of the program, I get an error saying the program cannot find coreaudio.dll and coreaudiotoolbox.dll. I'm using Windows 8.1. Are these drivers necessary? If so, how do I get them? Thx

    There is a dedicated forum for Premiere Elements:
    Premiere Elements
    You'll get the best advice there.

  • Testing and feedback needed for project

    here
    http://www.armoredlegion.com
    we're looking for feedback and suggestions for our game
    armored legion
    we've been working on it for about 4 months (minus a big
    break over christmas), it has about 16 planets to visit currently,
    procedurally generated (props and more distinguishing faetures are
    coming soon), and player versus player combat
    the server is custom written in c++, there are about 15k
    npc's spread across the worlds currently, and several hundred
    players per world is supported
    thanks
    - ZookazRules

    quote:
    Originally posted by:
    Newsgroup User
    This is nice, but sorry - I simply cannot accept worlds with
    no
    lightmaps and shadows any more. This is 2009 not 1999 !!!
    I've been pretty busy this week with real work (sigh), but I
    made a few minutes to throw in a quick shadow, just for you :)
    As for lightmaps, although they're trivial to add, I haven't
    for a couple of reasons. First off, the DCR is already getting a
    little large and there are so many other things that would offer
    more bang for the buck. Secondly, I don't really think they're all
    that necessary for these landscapes. I can't imagine much benefit
    to lightmapping some hills. If I were to add some buildings, some
    ruins, etc... then its an area to revisit.
    To tyree_2: The combat was a design choice, real-time
    wouldn't have taken any longer to implement. I grew up on games
    like Final Fantasy, Chrono Trigger, and similar games, so I wanted
    to bring back that style of combat in this one. In time more
    options, as well as group combat, etc... will be added.
    To Nanomedia: I'm not quite sure what you mean by that?
    Unless you had an existing account, you should have been taken
    through a tutorial and given a chance at combat right away.

  • HomeHub and the need for hard wiring

    I'm currently planning the wiring for our small extension.  I want to be able to use the Smart functions on our TV and in particular download films/programmes and will be switching to BT Infinity to make the experience as painless as possible.  My question is, should I run a cable from the HomeHub to the TV to improve its performance or is the Homehub's wireless performance up to the job?  Thanks

    Sonichedgehog wrote:
    Thanks gents.  That's what I figured.  Just leaves me with the headache of how to route all the cables!
    Don`t forget, you can use Powerline adapters, as described on my website.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Help and advice needed for Backberry Pearl 3G 9105

    I am trying to access sms messages that i have received but did not reply to, i know the folder but there are other sms messages missing that i have saved?
    Also how can i copy the sms saved messages folder to some where else like faourites?
    Any advice would be appreciated.

    You can't move "that" folder.
    But do you currently have your SMS messages as a part of the overall main Messages folder?
    If you want to move THOSE to a separate SMS folder... Go to your main Messages folder and select Options > Inbox Management > and UNcheck the "Text Messages" options to create a disinct folder for SMS.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Logic and coding needed for CU42

    Hi,
    I want to write a BDC program for transaction CU42 inorder to change single level BOM explosion to multilevel.There are around 10k materials.
    So please provide me the logic and if possible coding for that.
    Regards,
    Ramesh

    Hi Ramesh,
    Check the below tables.
    CUCO                           Additional Data for Configurable Objects
    CUCU                           Dependency Source Code Base: Source text:
    CUCVRNT                     Variants of Constraints
    CUEX                            Dependency Storage - Compilation
    CUFM                           Customizing: Class/Config: Screendesigner
    CUICONTEXT                 Control Table for Context in the iPPE Work
    CUKB                           Administrative Information for Dependency
    CUKBT                          Text Table for Dependency Maintenance Admi
    CUKN                            Dependency Storage - Variants/Configuratio
    CULL_TRACEFILTER      Filter for Low-Level Configuration Trace
    CUOB                           Assignment of Object to Dependency
    CUOBOM_CHANGE      Manually Changed Items in the Order BOM
    CUPE                           Extension to BOM Item for Variants
    CURSADD                    Dependency Net Additional Data
    Pls reward if it is useful.
    Regards,
    Boobalan Suburaj.

  • HT1212 My Ipad has shut off I guess and cannot get it to turn back on! Please help It is a school issued product and is needed for school. I have it plugged up but it doesnt even say that is charging.

    I had my Ipad up on a charger in my class and when I went to pick it back up the screen wouldn't turn on or do anything. Please help!!

    While aimed at the iPhone, the sections under Power/Battery and Display in this support article will largely still apply and may be of help:
    http://support.apple.com/kb/TS2802
    If not, your iPad may have suffered a hardware failure, in which case you'll have to ask your school how to proceed.
    Regards.

  • Run GUI app with sudo privileges and no need for Terminal?

    I try to use 'Locator' (the GUI version of the 'locate' command) but find that it can't update its database without root privileges, which defeats the GUI-ness of it.
    Can it be set up to be 'run as administrator' a la Vista?

    Not on my machine. Might you have changed it?
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-*//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"*>
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.apple.locate</string>
    <key>Disabled</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/libexec/locate.updatedb</string>
    </array>
    <key>LowPriorityIO</key>
    <true/>
    <key>Nice</key>
    <integer>5</integer>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/var/db/locate.database</key>
    <false/>
    </dict>
    </dict>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>3</integer>
    <key>Minute</key>
    <integer>15</integer>
    <key>Weekday</key>
    <integer>6</integer>
    </dict>
    <key>AbandonProcessGroup</key>
    <true/>
    </dict>
    </plist>

  • Files or Folders needed for blu-ray disc missing !

    Hi,
    I have Encore CS6. It successfully builds 'blu-ray folder' & 'blu-ray image' without any error. But when I try to create an iso image of the prepared folder using 'Ashampoo Burning Studio' it gives an error message saying that the folder doesn't contain all the files and folders needed for blu-ray. But when tried to do the same for DVD, there is no error. My blu-ray burning drive is broken and I want to check my finished project from my hard drive using Daemon's Tool and VLC or PowerDirector.
    Could anybody advise how this can be fixed on Encore CS6. Encore CS5 never had this problem.
    Thanks

    Tried that as well. The player gave an unrecognized format error.

Maybe you are looking for