Discoverer Desktop in future releases

Hello all,
Will Discoverer Desktop be available in future releases?
Thanks,
Andrea

I recently requested a stand alone install of desktop software (10.1.2 and was told by Oracle support to move to Discoverer Plus as desktop was going away. I was not given a time frame of when.

Similar Messages

Discoverer Desktop Support

Does anybody know if Oracle will contunue to support discoverer desktop in 10.1.2.3 and beyond or will it be replaced by Plus?

Hi
For the foreseeable future Desktop will be here. It is part of the Tools install along with Administrator. Even in Discoverer 11g there will be a Desktop tool because you use the same 10.1.2.3 toolset and the EUL does not change. Later on I can see the day that Desktop is dropped but we have been discussing this for a long time, even before 10g came out, and it is still available. What you will notice though is that Desktop has not been enhanced as Plus has been.
Therefore, perhaps a better question should be: "Should I continue using Desktop now that Plus is available?"
My answer here is 100% NO. You should not continue working with Desktop now that Plus is available. Plus is such a better tool with many additional capabilities. A couple of years ago I won the prize for best paper at the ODTUG 2005 conference for my presentation on what is new in Plus. That paper is available for free from my downloads page here: http://ascbi.com/downloads.htm The paper is called DRAKEFIRSTLOOK and you will find it about two thirds of the way down the page.
Here's another little tip that many people are not aware of. Let's say you have got 25 users using Desktop today. Your investment in licenses is at least $25,000 which you will be concerned about losing should you convert to Plus. I can tell you from experience that most Oracle sales reps will let you apply the vast majority of that cost against an application server license. It's just not an option that is widely discussed. You will of course have to pay maintenance and support on the new version but if you work the discussion right you can get licenses cheaper than you thought, which will then bring you up onto the latest version complete with its frequent release of cumulative patches.
I hope this helps
Best wishes
Michael

Discoverer Desktop Graphing Questions

I have several questions about the graphing tool in Discoverer Desktop:
1. I'm bringing in a customer id field which I convert with a to_char in the query from a numeric field. Most of them are 5-digit, but some are 4. I notice in the x-axis the customer id's appear only for the 5 digit id's, and for the 4-digit ones the identifier appears. i.e. if the 5th record has an id of 1508, instead of displaying 1508 it displays 5. Does anyone know how to correct this?
2. In the y-axis values, is it possible to display more than 5 decimal places? (We're dealing with very small percentages). When I try to enter 6 or higher as the decimal value in Options, it says invalid number.
3. When I open an existing workbook, it readjusts the y-axis scale to a max of 1, when I've set it to .0001. How I can I make this retain my scale values?
4. Is it possible to display the y-values in the graph area itself next to the plot points?
Thanks for any help!!!!

Hi paul,
Its a good idea to upgrade from 4i to 10g 4i is no more used by many and their are some issues or bugs with it.The latest version is 11g which has been released 1 week back.If not go with 10g version available.
1) Do all reports have to be stored on the database to allow them to be accessed by Plus or Viewer? Can only the 10G client version open files from a local hardrive or shared network drive?Yes they have to stored in the database so any ened user can access them from plus or viewer.
Can only one report be open at any given time with Plus or Viewer? In client it is possible to have 2 reports open at the same time to facilitate easier comparisons.Yes,if the reports are registered as different reports and if the end user has access to both the reports thn he can open and compare it OR if both reports are in same workbook as different sheets than its easy to view or compare.
NULL values are still showing the word "NULL" even though in Tools Options we have set it to show blank, existing reports are still using the NULL value.It should show blank,might be some problem.In discoverer 10g i think you will not find this issues.
Hope this helps you.
Best Wishes,
kranthi.

Discoverer 10g E-Business Release 12 Vision

I am currently setting up Discoverer 10.1.2 for use with Oracle E-Business Suite Release 12, as per Metalink document 373634.1.
I have reached the point where it's time to create a fresh End User Layer. However section 5.6 of the above document states that the 'Release 12 Vision database contains a pre-installed Discoverer 10.1.2 End User Layer'.
Can anyone tell me how to access this and what the default login credentials are? I can't find it in any Discoverer document.

Hi Mark,
To answer your original question:
"Can anyone tell me where I change configuration setting so that Discoverer Plus or Discoverer Desktop look for the correct dbc file?"
There is not a way.
It relies on what E-BS passes to it.
You can see this by capturing the URL after you click the worksheet link in E-BS.
You will see parameters like:
&SessionCookieName=vis
&Connect=%5BAPPS_SECURE%5Dvis
In my environment, these match $FND_TOP/secure/<SID>_<HOST>/ dbc file
You could also do a connection trace to see the values passed from E-BS
Note 370800.1 How To Create An Applications Connection Trace For Discoverer 10g (10.1.2) Plus / Viewer
Bottom line, you can't control it in Disco.
Hope that helps. Other Comments welcomed.
~Steve.

Installation of Discoverer Desktop only

Hi all,
Can i install only desktop version of Administrator? If yes, how?

I have found a Configuration guide :
B13918-03 : Oracle® Business Intelligence Discoverer Configuration Guide
10g Release 2 (10.1.2.1) for Microsoft Windows and Solaris Operating System (SPARC)
in Oracle documentation.
Regards,
Aparna

Will Discoverer Desktop work on Vista?

Are there any plans to release a new version of Oracle Discoverer Desktop that works on Windows Vista.
Thanks in advance

Hi Danko,
Even I came across Oracle and other websites reg Discoverer plus on Vista,
as of now this release doesn't support Vista yet except support for webtools like plus and viewer.
According to info from Oracle and other blogs and news, other releases of discoverer 10.1.2.3 or Discoverer 11g may support Windows Vista. may be we should be on latest release of AS10g or need to apply any patches by that time I guess, will wait and see.
As Oracle always constantly keep changing product versions, release numbers etc , we shoule be on track up to date :)
--Srinu

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Checkbox in discoverer desktop edition

Hi,
The query we are executing created for cross tab report have plenty of views and is returning null data which needs apps intialization which cannot be done from discoverer.
I think loging into Discoverer desktop edition with oracle applications user would resolve the same.
I have checked the checkbox in desktop edition and logged in as operations/welcome. but it is showing as invalid user name /password.
please help in setup that must required to check and login to oracle applications user. Also Provide if there is any alternative.
I would be very much thankful if you could help me on this.
Best Regards,
Katty.
Edited by: karthik.thadakamalla on May 10, 2009 11:49 PM

Hi,
The apps initialization can be done by Discoverer provided that you are connecting to an Apps mode EUL with an applications username and password.
You must specify that you want an Apps mode EUL when the EUL is created. Then when you connect to Disco Admin as the owner of the EUL you will be able to grant access privs and security to the Application users and responsbilities.
If you have an apps mode EUL and still get an invalid username/password then this could be because the application is running in secure mode. Then you need to copy the .dbc file to a local directory. Search this forum for details on how to do this.
Rod West

Discoverer Desktop crash

When trying to open a report created by a colleague, Discoverer immediately throws a Windows (Vista 32Bit) error that "Oracle Discoverer Desktop has stopped working". I click close program, and Discoverer closes. It's a very simple report so I recreated it yesterday, ran it fine, could change parameters for different outputs, no problems. This morning I log in and when trying to open the newly created report from yesterday, same error. No exception, no memory pointers, nothing, just the Win error that it has stopped working.
Anyone seen this before? Running Discoverer Desktop v 10.1.2.3 Client v 10.1.2.55.26.

My colleague was able to open and modify the report that I created without issue so I suspect the report is alright, perhaps my installation? Odd that I can run many other reports just fine in the same environment and that this one ran fine from development, but as soon as I closed it to reopen, no luck.

Discoverer Desktop Issues 10.1.2

Hi,
I am using Discoverer Admin and Desktop both of Verions 10.1.2
I have no issue with Admin; I could do successfully all the work here.
In Desktop i have login successfully as Application user; and created simple Order Report workbook (Order_Report.DIS) and saved it.
Again when i login as application user in desktop; When i try to open my existing workbook (Order_Report.DIS); It will prompt me
Do you want to run the query for the sheet Ord_report; Yes/No; If i select option as Yes i am getting error mesg as Failed to connect to database; If i choose No I will get empty sheet; In either case I will see empty sheet appears; From the Tool Bar if i select Sheet --> Refersh Sheet; I am able to see records in my sheet.
When i continue working on this sheet; All of sudden i get error screen as Oracle Discoverer Desktop has encountered a problem and needs to close
Basically i have two problems in desktop
1. When I open workbook i get error as Failed to connect to database
2. All of sudden i get vague error as Oracle Discoverer Desktop has encountered a problem and needs to close
I would appreicate if some one can help on this.
Thanks!!
Uday

Hi,
I have the same issue with Discoverer Plus 10g Rel 1 (10.2.0.2 )
Desktop and Administrator are working good. So, I cannot resolve it by re-installation.
Also, this is not reproducible. Sometimes it works very smoothly, but sometimes it gives error for the same report.
Any idea ?
Thanks!
Yogini

Discoverer Desktop 10.1.2 error while opening the report.

Hi ,
Do you know why I would be able to open a report from a Discoverer Plus responsibility in Oracle Financials but not from Discoverer Desktop?
The report was owned by User1 and shared with both Admin1 and AdminUser1. I have tried accessing the report with both user names, and in both cases, I get the error shown below when I am logged into Desktop but I do not get the error when I log in through the application.
Error message:
Join configuration cannot be resolved. Reason: more than 1 of the detail folder uses non-aggregated items
Thanks!
Radhakrishna

Hi,
try the solution suggested in below thread.
Join Configuration cannot be Resolved!!!
thanks!
Sunil

Discoverer Desktop Report issue

Hi,
One of my user is facing a format issue while running the report in Oracle Discoverer 10g. The report produces the following out put.
count(Col A)     Col B     Col C     Col D
12          A     200709     12-Sep-07
11          A     200709     21-Sep-07
24          B     200709     11-Sep-07
32          B     200709     13-Sep-07
10          B     200710     15-Oct-07
Col A is of number data type, Col B character, Col C is number and Col D is date
if Col D is removed from the report, the user is getting the result in following format
count(Col A)     Col B     Col C
23          A     401418
56          B     401418
10          B     200710
i.e. col C displays the sum of the value based in Col B instead of displaying it as 200709.
but when I ran the report from my end I'm getting the result in a proper manner.
count(Col A)     Col B     Col C
23          A     200709
56          B     200709
10          B     200710
Please help me in sorting out this issue.
Environment Details:
Oracle Discoverer Admin 10g(9.0.4)
Oracle Discoverer Desktop 10g (9.0.4)
End User Layer 5.0.2
Thanks in Advance.
Regards,
SS

@Himanshu3jul:
I'm not using any Oracle Application secure views. Also, the data that are being displayed is proper if Col D is not removed. If user removes Col D, the result is getting aggregated based on Col B but for me it is showing in a perfect manner.
@puppethead:
I'm afraid I may not be able to the check the registry on user machine since user is sitting at a different location.
@Rod West:
The default Aggregate property for Col C is set to <none> and it is grayed out. I'm not able to change it too. Also, if it is a bug then I should get the result as what user receives but I'm not facing any issues in that report but only user is.
Please let me know what can be done next to figure it out.
Also, I have the screen shots from my machine and from user’s. if you think that it will really help then I can post it. please let me know where and how I can post it so that you can have a look at it.
Thanks,
SS

Report Layout difference in Discoverer Desktop and Discoverer Viewer

Hi,
A report was developed in Discoverer Desktop. It is having some 10 columns as data points. The summarized columns for those 10 columns are required. But only 3 columns should be displayed in Detailed Data Points. So we shrinked(brought together) all the unwanted columns keeping 3 datapoints displayed. Now it is working fine in the discovere Desktop. But when we open the same report in the Discoverer Viewer, all the 10 columns are displayed in the Detailed Data Points as well.
Thanks in Advance
Regards
Rakesh

hi Michael,
good morning..hope u had a good sleep.
as per your last thought y'day, even though i create a function for the sum of season values n select those columns into the report, those will not be shown as summarized columns on right hand side of the report. they will be shown as datapoints for every month in that selected season.
i think the only possible solution for like this report is to hide those unwanted columns. for this we have hidden checkbox option in tools->sort while developing. but this option is available only for tabular reports.
if u come up with any fresh solution for the fresh day...i am glad.
Thanks,
_Rakesh.

Problem while installing discoverer desktop edition

HI
I find few error messages while installing discoverer desktop edition..
When i give oracle home as
name:OracleHome92
Location: DiscovererDesk
it gives me a error
" oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
When i give oracle home as
name:OraHome92
It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
"The location specified 'E:\Oracle\ora92', is already used an oracle home for an
'Oracle 82 beta'.It cann't be used as an oracle home for nt."
I have oracle 9i and form6i,report 6i installed in my system.
Please suggest me ..
Regards,
Satya

Hi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael

Discoverer Desktop Connections Fails With Invalid Username/Pass in r12

Hi all;
I have problem. I can login Discoverer Administrator from my localmachine and i can see what ppl did it there.. But when i try to login Discoverer Desktop from my localmachine its gives me Invalid Username/Pass. error.
I even cant login my system from browser :
http://xx.com:7778/discoverer/plus << pages comes and i fill in the blanks area like:
Connect to : Oracle Application
Username: sysadmin
pass: ***
Database: VIS
I found some document from forums. Whihc is :
Discoverer Is Unable to Connect to Oracle Applications database: invalid username/password Doc ID: Note:467919.1
Discoverer 10g (10.1.2) Connectons To Oracle E-Business Suite 12 Fails With 'Invalid Username/Password' Doc ID: Note:443661.1
But before i apply those patch i want to take advice from you. Coz i can login Discoverer Administrator and can use it but cant login Discoverer Desktop...its kind of wierd... i already checked what i have done in installtion and its all seems correct.
Any idea;
Regards
Helios

Discoverer supports two kinds of connections - database schema connections and apps connections. For Disco Admin, you login using a database schema, which, as you stated, works. For Disco User you login using an Apps user account (for which there is a no equivalent database scherma). To enable such a connection, you need to check the "oracle applications user" check box on the 10g Disco login screen. Also, under Tools --> Options, in the Connection tab, make sure that "connect to both standard and applications EULs" radio button is selected.
HTH
Srini

Discoverer Desktop in future releases

Similar Messages

Maybe you are looking for