Discoverer Drake with Oracle Applications 11i
Hi,
Is it possible to use Discoverer Drake with Oracle Apps 11i?
Thanks.
Lee
To clarify:
All versions of Discoverer can operate 'standalone' against Apps 10.7-11i. Only Discoverer 4i was certified in the 11i techstack and 10g r1 (9.0.4) is also certified using documented steps (see MetaLink). Discoverer 9i was not certified int the tech stack. Discoverer 10g r2 (10.1) can be used standalone with custom BA's, it is not yet certifiedd with the 11i pre-seeded EUL can content.
At this stage in the product, if using 11i, use 4i or 10g r1. If standalone, use 10g r1 (9.0.4) or 10g r2 (10.1).
Regards
Similar Messages
-
Upgrading Oracle XML Parser for Java v9.0.4 with Oracle Applications 11i
Guys, I applied ATG.PF.H.RUP4. In postinstall steps it is mentioned,Upgrading Oracle XML Parser for Java v9.0.4 with Oracle Applications 11i(doc-271148.1)
which says after applying patch 4038964 do the following--
AUTOCONFIG ENABLED APPLICATIONS ENVIRONMENT
If the Oracle E-Business Suite configuration files are maintained using the AutoConfig infrastructure, proceed with the following:
1. Run the AutoConfig utility.
2. Go to [JAVA_TOP].
3. Run the unzip -l appsborg2.zip | grep 9.0.4 command. If there is a file named as .xdkjava_version_9.0.4.0.0_production, which indicates that XML Parser for Java v9.0.4 is installed correctly as part of appsborg2.zip. Otherwise, run ADAdmin to regenerate the appsborg2.zip file.
4. Restart the application tier server processes such that the new version of Oracle XML Parser for Java will take effect.
but actually the patch is already applied- 4038964. How do i verify if i need to do these steps or not.
The xmlparserv2-904.zip file is already there in wrapper.classpath. of jserv.properties, forms.properties. So i think i dont need to do these steps.unzip -l appsborg2.zip | grep 9.0.4
0 04-18-03 20:10 .xdkjava_version_9.0.4.0.0_production
do i still need to do that step?No, you do not have to since "XML Parser for Java v9.0.4" is already installed as part of appsborg2.zip -
PCI Compliance With Oracle Application 11i
hi all,
i want to implement PCI Compliance in Oracle Application.So it will be useful to me if some body, who have already implemented this, send steps that are to be followed to implement PCI.
regards
YesukannanZameer - Various degrees of integration between Application Express and Oracle Applications have been achieved. Exactly how you go about it is requirements-dependent. Search this forum for related threads (keywords ebusiness, e-business) and see also http://spendolini.blogspot.com/2005/09/using-ebusiness-suite-responsibility.html.
Scott -
Discoverer report in oracle apps 11i
hi,
can you please explain me the steps involved in to view the discoverer report in oracle application 11i.... how to attach a discoverer report in oracle applications 11i versions...Hi,
Take a look at Metalink Note:278095.1
Rod West -
Oracle Applications 11i Load Balancing does not work with RAC one Node
Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
MoussaThis is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change. -
Help needed in installing oracle applications 11i in Linux
Hi every one . i m trying to install oracle applications 11i suite in Linux machine.. but i am getting error in the following way
Error in File System
Error - Unable to create directory with proper privileges:
Database ORACLE_HOME
Mount Point = /d02/oracle/proddb/9.0.2
and it continues for all the directories which application is trying to create..
And also Error in File Space Check
Error - Not enough free disk space on system :
Database ORACLE_HOME = /d02/oracle/proddb/9.2.0
required = 2905.0
available = 0.0
I have some 140 GB free space in my disk... Please help me out... thankx in advanceNothing changed .. its shows the same error...
i will explain my scenario... i have a dump of Oracle suite in Hard Drive.
assigned value to LD_ASSUME_KERNEL
Creater Users. group
created directories oracle & apps
and given permissions... to the directories...
Its showing the same error again and again... plz help out -
Java.lang.Exception: Invalid AD_TOP Oracle Applications 11i
Hi,
I have tried to complete Oracle Application 11i installation, but I have one problem.
I have multi node installation with 2 nodes(Virtual nodes with OEL 4).
First for database software and database and second for everything else.
I have successfully finished installation on database node and everything passed fine,
but when I have started installation with same configuration file (I have created it on the database node)
on the second node
I get the message in the log:
Starting CVM on Middle Tier.....
java.lang.Exception: Invalid AD_TOP
and my installation process wafting along time.
Can anybody help me with this problem.
Thanks,
Dragan.I have found on this location /baza/Stage11i/oraiAS/Disk1/ias/stage
problematic archive Archive: 806_d2pm.zip
I have tried to unzip problematic archive and I get:
[root@maximus stage]# unzip 806_d2pm.zip
Archive: 806_d2pm.zip
replace d2pm/install/relnotes/relnotes.map? [y]es, [n]o, [A]ll, [N]one, [r]ename: n
replace d2pm/install/relnotes/relnotes.vrf? [y]es, [n]o, [A]ll, [N]one, [r]ename: n
replace d2pm/install/relnotes/relnotes.ins? [y]es, [n]o, [A]ll, [N]one, [r]ename: n
replace d2pm/install/relnotes/partial.prd? [y]es, [n]o, [A]ll, [N]one, [r]ename: n
replace d2pm/install/relnotes/partial.prd.PRE_P15? [y]es, [n]o, [A]ll, [N]one, [r]ename: n
replace d2pm/install/relnotes/partial.prd.PRE_P16? [y]es, [n]o, [A]ll, [N]one, [r]ename: n
[root@maximus stage]#
What can I do now?
Best regards,
Dragan -
How to start and shutdown Oracle Applications 11i?
Currently, I've installed an Oracle Applications version 11i under Sun Solaris environment. However, I encountered problems when I tried to backup the whole system for fallback purpose. I'm not really sure about the procedures in shutting down the Oracle Applications components. So, is there anyone could tell me such procedures, hopefully including the command used for shutting down the whole application system? Thanks.
Besides, I would like to know how can I start Oracle Applications 11i as a daemon? If cannot, how can I start the server within the UNIX shell? Thank you very much.You will have specified a common directory in your installation, which is usually referred to as COMMON_TOP.
Under <COMMON_TOP>/admin/scripts there are a host of shell scripts for stopping, starting apps components. Also, under the database Oracle Home (816 or 817) you will find an appsutil directory with similar scripts.
Typically these two directories will be in your PATH.
You can create a stop script, typically as:
adfrmctl.sh stop
adrepctl.sh stop
adfmsctl.sh stop
adfmcctl.sh stop
adapcctl.sh stop
adcmctl.sh apps/apps_password stop (wait till FND processes cease, a sleep 300 might suffice)
adalnctl.sh APPS_<SID> stop
addlnctl.sh <SID> stop
addbctl.sh stop
A start script would call the same scripts in the reverse order, substituting stop for start. -
Move order pick slip report in Oracle Application 11i
hello
I have problem with Move Order Pick Slip Report in Oracle Application 11i that in my system it is not running. when I submit this report from my system, the application halt and I have to restart application on my system.
on other computer it is running properly
Pls help me in this regard
SadiqHi,
Looking for some help on this.
Thanks in advance!
Venkat -
Difference between oracle application 11i and release 12
can some one give me a doccument..link..or anything related to difference between oracle application 11i and release 12 with all details technical and strucutural
Please check the following links:
Note: 404152.1 - E-Business Suite Release 12: Release Content Documents
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404152.1
what is the difference between REL 10.5.10 and REL 12
Re: what is the difference between REL 10.5.10 and REL 12 -
Oracle iPortal Integration with Oracle Apps 11i via SSO
How can we integrate Oracle iPortal with Oracle Apps 11i via SSO?
Is there any documentation on this topic that anybody could share ([email protected])? I have already searched the Portal Studio and the Metalink without much success.
Any suggestions and possible recommendations/solutions are highly appreciated! Thank you for answering this post!
Best regards,
Lina Danchenko
P.S. I am unable to view the note 146469.1 Configuring Oracle Applications with Oracle Portal on the Metalink. Any idea where I can find it? Thanks in advance!In a future release, Oracle Apps will be integrated with SSO out of the box.
Currently there is a pilot program which several companies are participating in to beta-test this
integration, but this program is not open to additional customers.
Please speak with your Oracle sales representative to get a better idea of current options
and general availability dates.
You do have the option now of just configuring Oracle Apps as an External Application. -
Problem Installing Oracle Applications 11i on
Gurus.. Please help...
I am trying to install oracle applications 11i on Windows XP Professional and for some reason the process is getting stuck at :
Step 3 of 5
Command: c:\oracle\proddb\9.2.0\temp\PROD\adrundb.cmd
g Performing database characterset conversion adsvdcnv.cmd
I have tried several times and everytime it is getting stuck at this stage only.
I am installing in language English only... and selected most of the options defaulted by the system.
The system doesnot give any error message but get stuck at this point for hours. Couldn't figure out the problem... Please throw in some ideas... Thanks in advnance...Check the install log, this will tell you what happened with the file that was having problems. If you want to email the log to me i will have a look. But a lot of people have the same problem with this file so it's easy to fix.
[email protected] -
Query retrieval limit for discoverer reports in oracle applications
Hi,
I would like to set the query retrieval limit for discoverer reports in oracle applications. Can i have the steps for the same?
Cheers
MaytasHi Maytas
As Michael said the query retrieval limit can be defined by Discoverer Administrator
like :
- Discoverer Administrator >> Tools >> Privilege >> Select the user that will see the workbook >> Query Governor tab and there you setup the query retrieval limit.
Note:
Normally if you defined the limit for the user via Discoverer Administrator it should work but i saw that this was not happened in my case when i open Viewer so i entered with my eul owner on Discoverer Plus and defined the limit for all the workbooks
Tools >> Options >> Query Governor >> Limit Query retrieved data to
Regards,
Dani -
Discoverer viewer without oracle application server
Hi,
has anybody heard, how to use the discoverer viewer with
another application server (than oracle).
since j2ee is a standard there schould be a way.
our administrators will not look after another
application server, just to get some reports.
so i have to get it running on a non-oracle-application server (or worst case: choose another reporting tool)
thanks,
UdoDiscoverer is available and ships as a component of Oracle Application Server. Oracle Application Server via Oracle HTTP Server provides a proxy capability to support other web servers such as Netscape iPlanet and Microsoft IIS. The proxy capability will enable client applications to directly route requests to their native web server and these then get routed to Oracle Application Server and the Oracle HTTP Server. For detailed information on support for these web servers please refer to Oracle Application Server documentation.
Regards
Discoverer Technical Team -
Stopping a report ( ORACLE APPLICATION 11i )
Hi,
I've got a report 6i, this report is launched for all business here in ORACLE APPLICATION 11i. I want for some business to stop the executionof report. It runs using trigger AFTER PARAMETER form but the concurrent ends in WARNING status.
How to avoid the warning status ?
Thanks.
RomeoHello
I woulk like to have a trial version of Oracle applications 11i, any help?
Thanks Go to the Oracle Store and buy it for $40. Its the complete implementation with no time limit. The only thing you can't do with it is go to production.
Maybe you are looking for
-
BW variable: Inconsistent in loading. please check use of deleted objects
Hi Experts, I encountered an error and can not solve it following OSS note. When I create a variable in query definition for an infoobject, it prompts an error dialog 'Inconsistent in loading. please check use of deleted objects'. I checked the OSS n
-
I tried recover mode twice and it did nothing. The 15 day warranty is already up and I'm just wondering if I need to replace the battery at all? Also, before it stopped charging, it would turn off for no reason and the only way to turn it back on was
-
Block invoices for PO with no GR-based IV flag
Hello SAP experts, I need your help with finding a way to block invoices for PO with no GR-based IV flag. At our company, we treat service POs almost the same as material POs (to avoid receipt of service entry). The only difference from material PO
-
Cost estimate wrong after adding accounting/costing view
material 3000232 previously does not have accounting and costing view, now we maintained them, after running ck11n, it shows below error: no itemization exists for material, message number ck219, by drill down, the costing log is saying bom not exist
-
Glow.aex cannot be loaded. How do I fix?
Whenever I apply Glow to an adjustment layer, a popup up says "After Effects Error: plug-in "Glow.aex" could not be loaded", although it is in my effects and presets. I have provided screenshots to further explain my problem.