Discoverer Import Catalog Error [D4O-1122]

Hi, I am trying to import a discoverer catalog but I get the following error:
Error - oracle.dss.d4o.administration.D4OExportException-D4O-1122 Error while attempting to import.
The thing here is I've successfully imported and exported catalogs in the past. I've also tried searching for D4O-1122 error on metalink, but to no avail.
Please help.

It turned out that there is a solution in metalink (Doc ID: 363235.1), but the error still persist.
The solution was to alter D4OSYS users, and set its quota to its tablespace to unlimited. Unfortunately, I still get the error.

Similar Messages

Can't Import Catalog - Unknown Error

Is this still a known bug without a solution?
I have LR3 on a MacBook Pro Snow Leopard and on a PC Desktiop Win XP Pro SP3. I exported a catalog from the laptop to an external hard drive and then attempted to import it to the desktop and kept getting the dreaded Can't Import Catalog - Unknown Error message.
I don't have an issue with LR Beta because i didn't use it; I just upgraded v2.6 installations on both machines to LR3.
I like LR3 but I've got to be able to get the image files and the LR work I've done on them from my laptop to my desktop and an Unknown Error is not what I need. Am I going to have to wait for the first dot release to be able to do this?
--Bob

Well, I just got off the phone with Adobe Technical Support and I am extremely frustrated
Support: Since you are working cross-platform (from a Mac laptop via an external hard drive and then to a Win XP desktop) we can only say that sometimes it will work and sometimes it will not.
Me: Huh? It worked perfectly in LR 2.6.
Support: I am sorry. That is all I can tell you.
Me: That really ruins my month. I've got thousands of edited images on my laptop from a 3 week trip to SE Asia and now I can't move the catalog to my desktop? Give me a break!!
Support: You can copy the image files to your desktop.
Me: Without the accompanying adjustments?
Support: Yes. Sorry.
Me: Me too.
Anyone have a better idea? I've filed a bug report.....
--Bob

LR 2.1 - Importing catalog sees 'Unknown Error' and fails.

Anybody else seen this dialog box?
'Could not import catalog due to unknown error'
This is happening in LR 2.1. First catalog import attempt. I've had no issues previously.
Upon importing, LR will go through the whole process as though importing, and then at the end of the progress bar, I get the above dialog box. And nothing's there. The import failed.
Anyone else seen this? Suggestions?
-Sol
(MacBook Pro intel 2.2)

Hey Geoff,
Great to hear from you, as always. :)
Well, there were more un-cataloged images that may have been contributing to the situation. I had created web-rez images for my client within subfolders of the main client folder. Once I synchronized, the images were added. Unfortunately, I'm still getting the error message at the end of my import. Now, the weird thing is, if I import the LR catalog only, it disappears after the error message. But, if I tell the import to include the 'Digital Negatives', which includes all the session files (RAW,PSD, jpegs), after the import and then the error box, everything seems to be there and actually looks fine. At least as far as I can tell. I can see the all the files, the ratings, the keywords, etc. A little un-nerving though to say the least. I'm afraid to dump my original catalog and folders.
FYI, what's going on is that I work on my current client sessions (including all related files) off of my MacBook Pro as my 'Current' catalog. I then have my main LR Catalog (all other images) on a back-up RAID drive. So I'm trying to export from the MBP, over to the back-up RAID LR Catalog.
Again, the 'Export' seems to go fine. Not sure what's going on here.
Thanks for your help and input.

Problem with IMPORT CATALOG

I have a question concerning the move of one recovery catalog from one server to another using the IMPORT CATALOG command.
We have three Windows 2008 severs on which we are running Oracle 11.1.0.7.0. On server A we have nine Oracle instances that we backup with RMAN using a recovery catalog (rcat1) at server B. Now we have installed a new server, C to which we would like to move rcat1. We created a new instance, rcat2, on server C and did the following:
rman catalog rman2/xxx@rman2
RMAN> create catalog;
RMAN> import catalog rman1/xxx@rman1;
We get the following error message (sorry but some of the text is in Swedish):
Starting import catalog at 2010-10-15
connected to source recovery catalog database
import validation complete
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of import catalog command at 10/15/2010 10:13:01
RMAN-06004: ORACLE error from recovery catalog database: ORA-02085: databaslänken DBLINK_ENO3LA.RMAN är ansluten till RCAT1.WORLD
It complains about some database links (can be different links, always concerning rcat1.world), but there are no database links in rcat1, rcat2 or any of the source databases on server A.
All the databases are in the tnsnames.ora file on all servers, and we have tried to perform the command from all three servers, but we get the same error and are now running out on ideas… Has anyone had the same problem?
Would it work to create a new database on server C with the same structure and name as the one on server B and just copy all the files from rcat1 on server B to the new rcat1 on server C? Or, is RMAN somehow aware of the servername/ip-address of the server of the recovery catalog?
Thanks in advance!
Helen

Hi Helen,
Your ORA-:
ORA-02085: databaslänken DBLINK_ENO3LA.RMAN är ansluten till RCAT1.WORLDhas the following explanation.
ORA-02085:
database link string connects to string
Cause: a database link connected to a database with a different name. The connection is rejected.
Action: create a database link with the same name as the database it connects to, or set global_names=false.
but there are no database links in rcat1, rcat2 or any of the source databases on server A.Probaly the link is dynamicly created due to the < import catalog > command.
Set global_names to false on rcat1 & rcat2 and retry.
Regards,
Tycho

Photoshop Elements 10 Import Failed Error

I have installed Elements 10 and when I try to import my Photos I get a Import Failed Error. Any suggestions. PE 10 was working prior and I had to replace one of my drives and I did a clean install.
Any Ideas?
Windows 7 Ultimate

Yes, developing a new catalog worked in my case...
Why would this happen to a catalog?
Can I move them into the old catalog safely?
If so, how do I do that?
How do I move all the keyword tags into the new catalog?
Thanks!

LR cannot Import - Unknown Error

I am getting this error message when trying to import a catalog "Lightroom could not import because of Unknown Error".
The catalog I am attempting to import contains about 6000 images and was built by the beta during the Beta phase. It opens fine by itself - as it worked throughout the beta. I have no problems opening it and working on it directly with LR3.0.
However, since this was my catalog for just a couple of projects during the Beta, I now want to fold it into my main catalog of some 19,000 images. My main catalog was my LR2.7 catalog and I have successfully converted it to LR3.0 - it opens fine and works fine.
Said in another way, while running 3.0, I can switch freely back-and-forth between these 2 catalogs using File | Open Recent
I am just unable to import the beta's converted catalog into it. After doing File | Import from Catalog, LR asks for the name - I navigate to the xxx.lrcat file and select it. The import starts and displays a Preparing to Import information window...perhaps for a second or two, then stops with the above message which is reported as a Warning .... however, the import stops at this point.
So, this is kind of serious......
Both catalogs are on the same drive, with plenty of free space.
What additional information do you require to resolve this ?
jc

thanks for the input .... I had some duplicates in the beta catalog. I
resolved them manually then removed them from the catalog and Optimized it.
I was then able to Import from Catalog without difficulty.
jc
From: Gary Jones UK
Sent: Wednesday, June 09, 2010 7:48 AM
To: Jim Camelford
Subject: LR cannot Import - Unknown Error
This has already been reported and the problem has been identified by Adobe.
The key post is this one: http://forums.adobe.com/message/2877882#2877882

PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log

Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING    2011-02-23 19:56:12.607
           CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE      2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR      2011-02-23 19:56:12.607
           CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PM

Hello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul

Lightroom wont open due to catalog error

I have been trying to open lightroom but I keep getting a catalog error and I read all of the forums to help my problem but I just dont understand how to fix it. I have uninstalled and installed almost three times and it still hasnt fixed it. I was learning how to use lightroom then I was just seeing what a catalog was I guess I did something wrong and i got the error. it says cant open dadsfamilypictures 101.jpg.ircat it was a whole file of pictures. Can someone fix this for me! I dont know how to get it to work. Thank you!

Yes that worked I just had to rename the prefreneces! Thank you that was alot easier than looking at half of the stuff on here. I can now use it after ive been trying to figure this out before christmas! Thank you!

AP INVOICE IMPORT시 GDF 관련 ERROR 가 날때

제품 : FIN_AP
작성날짜 : 2003-01-20
AP INVOICE IMPORT시 GDF 관련 ERROR 가 날때
====================================
PURPOSE
AP Invoice Import시 GDF 관련 Error 가 발생할 때의 해결책을 제시한다.
Problem Description
Korean Tax program을 설치하여 사용하는 고객 사이트에서 AP INVOICE IMPORT 수행시 TAX 관련한 GDF IMPORT 부분에서 ERROR 가 발생하였다.
Error Message 는 다음과 같다.
Invoic 무효한 GF_CONTEXT 컬럼 GLOBAL_ATTRIBUTE_CATEGORY 에 무효한 값
Workaround
KR TAX 프로그램에 따른 specific 한 문제이므로 global한 support를 받을 수 없고 아래와 같은 작업을 해주어야만 한다.
Solution Description
1. GDF 생성
JG_AP_INVOICE_INTERFACE GDF를 JG_AP_INVOICES와 마찬가지로 Setup한다.
2. 다음의 Package의 에서 '수정' 이란 주석이 달린 부분과 같이 수정하여 컴파일 한다.
PACKAGE BODY JG_GLOBE_FLEX_VAL
......(중략)...
IF p_calling_program_name = 'APXIIMPT' THEN --Invoice Gatewayvalidation prog
IF p_context_code IN ('JA.TH.APXIISIM.INVOICES_INTF',
'JA.TW.APXIISIM.INVOICES_FOLDER',
'JA.SG.APXIISIM.INVOICES_FOLDER',
-- 'JA.KR.APXIISIM.INVOICES_FOLDER',
'JA.KR.APXINWKB.INVOICES', -- 수정
-- 'JA.CN.APXIISIM.INVOICES_FOLDER',
-- 'JA.KR.APXIISIM.LINES_FOLDER',
-- 'JA.CA.APXIISIM.LINES_FOLDER',
'JE.BE.APXIISIM.EFT',
......(중략)...
FUNCTION reassign_context_code(
p_global_context_code IN OUT VARCHAR2) RETURN BOOLEAN IS
BEGIN
IF (p_global_context_code IS NULL) THEN
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.TH.APXIISIM.INVOICES_INTF') THEN
p_global_context_code := 'JA.TH.APXINWKB.INVOICES';
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.TW.APXIISIM.INVOICES_FOLDER') THEN
p_global_context_code := 'JA.TW.APXINWKB.INVOICES';
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.SG.APXIISIM.INVOICES_FOLDER') THEN
p_global_context_code := 'JA.SG.APXINWKB.INVOICES';
RETURN(TRUE);
-- ELSIF (p_global_context_code = 'JA.CN.APXIISIM.INVOICES_FOLDER') THEN
-- p_global_context_code := 'JA.CN.APXINWKB.INVOICES';
-- RETURN(TRUE);
-- ELSIF (p_global_context_code = 'JA.KR.APXIISIM.INVOICES_FOLDER') THEN
-- p_global_context_code := 'JA.KR.APXINWKB.AP_INVOICES';
-- RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.KR.APXINWKB.INVOICES') THEN
p_global_context_code := 'JA.KR.APXINWKB.INVOICES';
RETURN(TRUE); -- 수정
-- ELSIF (p_global_context_code = 'JA.KR.APXIISIM.LINES_FOLDER') THEN
-- p_global_context_code := 'JA.KR.APXINWKB.INVOICE_DISTR';
-- RETURN(TRUE);
Reference Documents
-------------------

Can I import catalog photos from a usb drive?

I have imported photos from a catalog into a new catalog. Some of the photos in the catalog are located on a remote drive. The drive is not listed when I select the photos to be imported. Is it possible to import catalog photos from a usb drive?
Howie

Hi Keith,
"Import from another catalog" is a selection found in the Lightroom "File" drop down listing. Sorry I wasn't clear in my reguest. I have used this function to import photos in to my new Catalog from my old Catalog. During the import process, Lightroom creates a working catalog from which photos can be selected. A file list on the left side of the window displays the available hard drive folders. Once the photos to be extracted are selected the source folder is checked. The import button, on the bottom right of the window, is highlited to execute the import function. Since the external USB hard drive is not listed, the import function is not available.
My question: how do I enable the import from my USB drive? Perhaps I will have to move the files back onto my internal hard drive using my Lightroom's old catalog.
Howie

ABAP Import Phase error during Install

Hi out there. I am installing an ERP system ECC 6.0 SR3 with just the AS ABAP and ECC components. It is now on the ABAP import phase and returns the error that certain ABAP objects are failing out of the 112 objects that is processing. Current examples are : -
=============================================================================
Loading of 'SAPSDIC_2' import package: ERROR
(DB) ERROR: DDL statement failed
(CREATE INDEX "VRSX2~1" ON "VRSX2" ( "RELID" , "OBJNAME" , "VERSNO" ) )
DbSlExecute: rc = 99
(SQL error -602)
error message returned by DbSl:
=============================================================================
Loading of 'DD03L' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
Loading of 'SAPAPPL2_9' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
I wish to know how else can 1 work around this ABAP import phase with errors such as these? Is there a manual procedure I can perform for this phase during installations so to avoid these errors that come up. And then re-run the install that goes past this?
Any help will be greatly appreciated.
Thanks in advance.

Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday

Discoverer 4i Viewer Error

In our company we installed the Oracle Discoverer 4i Early Adpator and, when we try to use the Discoverer Viewer, an error occurs.
This error happens when I apply the parameters of a worksheet and the symptom is like a download of a file, named "ca54zrse.txt". The content of this file is:
"java.lang.NullPointerException
at oracle.discoiv.session.model.ModelQuery.run(ModelQuery.java, Compiled Code)
at oracle.discoiv.session.model.ModelQuery.run(ModelQuery.java, Compiled Code)
at java.lang.Thread.run(Thread.java, Compiled Code)"
When it occurs, the connection with the database is dropped and I have to connect again.
I'm using Oracle Database Enterprise version 8.1.7.
What can I do? Is it a network error or a database error?
Please, help me!
[email protected]
[email protected]
null

Check your jserv.conf as well as zone.props
Check these area closly
CHW
null

Import rules, error message "Invalid system"

Hi,
When importing rules under Rule Architect - Import rules, error message "VBS is invalid system" . In the configuration tab we have system and System Name defined as VBS, test connection successful.
Why is it giving an error message VBS is invalid system? Please advise.
Thanks,
Sri

Hi,
Is it rule import after taking an export from other system? In that case, make sure destination system name doesn't contain any space in it.
Also, make sure text and auth Objects are uploaded for VBS system before doing rules import.
Regards,
Sabita

Loading of 'SAPSSEXC' import package: ERROR

Hi All
I am installing Solution Manager 7.0
but it prompt error when import ABAP ......
Loading of 'SAPSSEXC' import package: ERROR
Edited by: Kevin Wong on Jun 19, 2009 9:53 AM

Log of 'SAPSSEXC'
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090618160337
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -ctf I F:\software\sap\51033518_2\EXP4\DATA\SAPSLEXC.STR C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL SAPSLEXC.TSK ORA -l SAPSLEXC.log
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job completed
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090618160337
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090618160337
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090618160338
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090619095804
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090619095805
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090619153522
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090619153527
Edited by: Kevin Wong on Jun 19, 2009 9:54 AM

Language import RSTLAN_IMPORT_SINGLE error

hi all
I excuted RSTLAN_IMPORT_SINGLE for change request (exported Language) import.
but error occur
==================================================
1AETW062 client "700" doesn't exist. Please choose another client
==================================================
700 is DEV client but I want import to 100 client in PRD.
system info
ECC 6.0 basis 70017
tp, r3trans the latest version
one more question!!
when I check Create Backup Request option
error occur
==================================
could not create backup request
==================================
plz any help
thanks

hi Shashank Awasthi
In DEV, I executed report RSLTMOD that is made change request for modification translation.
and then I try to import change request using RSTLAN_IMPORT_SINGLE report in PRD (upgraded)
DEV client is 700 and PRD client is 100 so I want to import change request 100 client in RRD.
above error message is occured RSTLAN_IMPORT_SINGLE report.
this problem is kernel patch in searched some notes but I use the latest version.
plz help
thanks

Discoverer Import Catalog Error [D4O-1122]

Similar Messages

Maybe you are looking for