Discoverer Plus not showing changed Long Description Attribute for dimesion

We have created Discoverer reports on OLAP AWM cubes.
We modified Long description and short description for one dimension.
Now in Analytical Workspace it shows correctly modified Long and short labels.
However Discoverer report still shows Old Value. When we try to create new report on same cube, then also it shows old long and short label.
We are using 10g AWM.
Can anyone help.

Similar Messages

Problem in choosing Long Description Attribute in AWM

While creating a dimension,both Short Description Attribute and Long Description Attribute can not be checked in simultaneously.Even though I tried to check both the options while creating but during data mapping it is showing only short description attribite.
Is there any workaround you can give me to declare both Short and Long Description Attribute simultaneously.

Never seen before. What version?

RAR5.3 - SoD Report Not Showing Full Risk Description

Hello,
In a Sandbox environment, I'm playing around with/testing a new ruleset. The environment has our Production ruleset and I've added some risks to this ruleset via file upload in Configuration. The risks look great. Both the description and detailed description got imported correctly. The rules generated perfectly for these new risks I uploaded. Everything related to the risk, the way the risk is built, the rules, looks perfect. When I run Risk Analysis on test users that I know have the risk, they show on the report just as expected. However, the risk "description" is essentially missing. For example, in Management Summary View, here is what Risk B001* looks like:
B001: Basis Development & System Administration
Medium Basis TEST_USER(TEST_USER) USSPCJH40_E3
I've bolded the Risk Description.
However, here is what one of my new risks shows up like (F031, a risk we haven't put in production yet for various reasons):
F031: F031
Medium Finance TEST_USER(TEST_USER) USSPCJH40_E3
The Risk Description only says "F031." It still is hyperlinked so it still works, but I want to see the full Risk Description, obviously. When I look at the Risk in Rule Architect, both descriptions are there.
I then extracted the Rules via Rule Export and looked in the VIRSA_CC_RISKT table - the F031 description is there!
B001 (which looks fine) and F031 (which has the description missing) has entries in ALL of the same tables (unless there's a table that I'm not getting with the export?)
Can anyone help me out? Has anyone experienced a similiar issue? Why would all my newly imported risks not show a Risk Description when running Risk Analysis?
Thanks in advance!
Jes Behrens
Edited by: Jes Behrens on Feb 26, 2009 8:26 AM

Hi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks

My designs are not showing, how long is the approval process

My designed personas are not showing, how long is the approval process
== This happened ==
Not sure how often
== Next day after uploading

A few days to a week, give or take.

HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
<Email Edited by Host>

My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

1. verify on another Mac first. and another port.
2. very likely dead SATA card
read about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available. Does not show up when I search for it. Plenty of memory . . .

I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

Dropbox does not show up as an option for "Save As" as OneDrive does (came preinstalled that way).

Dropbox does not show up as an option for "Save As" as OneDrive does (came preinstalled that way). Dropbox is installed but I had to use Selective Sync since the Stream only comes with a 30GB drive and my Dropbox account is 1TB.

Hi @gatesoui ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Stream Notebook and issue with DropBox. Here is the support site for Dropbox.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Discoverer Plus not working in Internet Explorer

IE 6.0 on Windows 2000 professional SP4 and all of the patches up to date.
Latest Java run time from Sun.
I hit the link to Plus and it will eventually bring me back to the login screen with all of the parameters empty. It also opens a new window which is in the background that is blank. The java icon does not appear when I click on the link either.
I had the google tool bar installed so I removed this. Still the same result.
I tried this in Firefox and it works perfectly! I have also tried IE with other applets and they all work perfectly.
The environment is all in an Intranet. I have tested this with another Win2K desktop and got the same results. I have also tried plus with an NT desktop and it also does not work.
Anyone else experiencing anything like this?

Found the problem.
The default installation has WebCache listening on port 80 and then Apache is listening on port 7777 or 7778.
Discoverer Plus requires a JVM to run and with IE, it installs a particular version of the Sun JVM. The installer points to a hard coded URL in the $ORACLE_HOME/discoverer/config/configuration.xml file for IE users. For whatever reason, the URL is not pointing to the WebCache port but to the Apache port directly. The configuration file doesn't have a section for Firefox so it just loads a JVM which is already installed.
I had disabled WebCache because it is another layer to fail when I don't really need or want WebCache. I did this by turning off WebCache with OEM and then editing the httpd.conf file. I changed Listen 7777 to Listen 80.
Now when a user with IE tried to open Discoverer Plus, the configuration points the browser to a port that Apache isn't listening on anymore.
The fix is to have Apache listening on both 7777 and 80 when disabling WebCache. Or you can edit the configuration.xml file and and remove the port number so that it gets either 80 or 443 automatically.

Workbook works fine in discoverer plus but shows error in discoverer viewer

Hi,
I have some issues with the parameter of a report.
one of the parameters is
mgr_id (eg: 1,2,3) -- from database table.
manager names are not available in the database but they are known to users like
1 - david
2 - alan chris
3 - peter
so the requirement is
(i) the input parameter wud be entered as 1 or 2 or 3 or null ( or in multiple combination or all).
But the report shud have parameters in the header of the report.
for eg: if the input parameter is mgr_id = '1' then the report shud have manager name: 'david' in the header.
if the input is mgr_id = '1',' 2', '3' then on the report header, it shud display as manager name: 'david','alan chris','peter'
(ii) the default value of mgr_id shud be 'ALL'. if the user enters mgr_id as 'ALL' then it shud take all the values of mgr_id and pull all the values of mgr_id (like 1,2,3)
and the report header shud display as department name: 'ALL'
i have developed a custom query where i used,
select dept_id, decode(mgr.mgr_id,'1','david','2','alan chris','3','peter') as mgr_name, ..... etc.
in discoverer admin,
I have created LOVs (item classes) for mgr_name.
after that going to properties of mgr_name, i have selected mgr_id as indexed item.
and in the report i have created parameter dept based on mgr_name and selected the option -- allow to select both indexes and values.
and in the default value i mentioned 'ALL'.
after that i changed the condition as
((mgr_name = :manager name) OR (mgr_name LIKE DECODE(:manager name,'ALL','%')))
and in the header, i used &department name --- then it displays correctly.
but the problem is ---
the report works fine in plus. the problem is only when parameter value is 'ALL'
when i run the report from discoverer viewer for the very first time (after logging in), the report works fine with correct data.
but when i run the same report second time with parameter value 'ALL', it gives an error ---
Invalid value "''" for parameter "department name"
i dont understand, why it works for first time and doesn't afterwards. If i logout and login again, it works fine in viewer.
am i doing anything wrong in conditions or declaring the parameters?
I came to know that, the very first time, when we enter 'ALL' it is taking '%' but when we run for the second time, it is taking NULL. since NULL isn't there in mgr_id or mgr_name, it is throwing that error.
How do i fix this error?
Thanks

Hi Puppethead,
I have tried with your suggestions.
the following condition -- did not work
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
but for the other condition ---
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
if the user enters null, it has to display records with null only but with the above condition it takes '%'
The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
Thanks

Bridge Not Showing Changes made in Camera Raw

Hi I work on an iMac (Mac OS X, version 10.4.11), and am currently trialing CS4. My problem is that I have been processing Canon Raw files in Camera Raw, but when I view the images in the preview pane of Bridge, it is not showing the changes that I have made.
This is just a sudden problem. I have been working like this for ages in CS3, and it was even working properly in this trial version of CS4, but literally all of a sudden in the middle of processing a wedding shoot it stopped showing the changes. So half the images now show the changes but the rest do not, and it no longer shows any of the changes I make in Camera Raw
Does anyone have any answers to why this suddenly changed?
Cheers Da ni

DaniJumbo wrote:
This is just a sudden problem.
"Sudden" is usually a sign to trash your suddenly corrupted preferences. Hold down the option key as you launch Bridge.
You may also need to Purge the Cache for each offending folder through the Tools Menu in Bridge.
Also check your thubmnail options:

DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again. I'm sure there's something I'm missing but can't figure it out. Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

Apps have no access to photos and do not show up in privacy settings for me to change it!

Hey Everyone I really could use some help! Ok so I recently got sent a replacement iphone 4 in the mail. I backed up the old iphone 4 and transfered that information over to the new one NO PROBLEM. I downloaded my apps no problem either BUT here is my question. My apps such as facebook, twitter, and instagram do not have access to my photos. When i go to settings > privacy > photos NONE of the apps show up and they also dont show up under anything else in the privacy part like contacts for snapchat to use (which doesnt work either). My restrictions are enabled and my photos and everything else under there are selected to ALLOW changes. I have tried resetting the location and privacy as well and still the apps will not show up under privacy so I can give them access. Its very frustrating to not be able to use the apps. SOMEONE PLEASE HELP! Also i have tried deleting and reinstalling the apps that hasnt worked either

Make sure that you have Include Photos from Subfolders checked

Preview in browser not showing changes in muse

I am trying to preview my changes in Muse but it's not showing any updates. I've doubled checked updates and shut down my laptop to reboot but still not working.

Hi there,
Could you tell me which version are you using, is it Muse CC or Muse CC 2014?
Also tell the Operating system that you have?
Have you checked both Preview in Muse and preview in browser? Try with clearing the browser cache.
Also, when you preview in browser, could you copy the address it shows in the address bar and paste it in the address bar of any other browser like Firefox or Chrome, see if it shows changes there?
Thanks.

Discoverer Plus not showing changed Long Description Attribute for dimesion

Similar Messages

Maybe you are looking for