Discoverer Portlet - where is refresh information stored?

Hi again
When specifying refresh information in a Discoverer Portlet (step 6 I think) where is this information stored?
I would like to programatically change the "next run time" depending on the refresh completion of our data warehouse but I simply cannot figure out in which tables the refresh information is stored...
Can anyone help me here?
Claus Jessing

I have some problems like that
I have a page is created form two porlet : Simple Parameter Form & Discoverer Worksheet . Then i have created parameter for them and add some information like : Company, Center , Type, From_date, ..... Final I have a page like this photo .
http://www.albumtown.com/data/99d86f4ed61dbbb54fe8caef653f8498/47650_p682099.jpeg
But when i change the information from simple Parameter such as : From_date, To_date.... the Discoverer Worksheet is changed like this :
http://www.albumtown.com/data/99d86f4ed61dbbb54fe8caef653f8498/47650_p682100.jpeg
Refreshing Portlet
The portlet is refreshing. There is no estimate available for the time it will take to refresh. Click the link below to refresh the page and check if the portlet is refreshed.
Refresh Page
I must click the link "Refresh Page" until Discoverer Worksheet shows the information .
I want to know "when refresh page finish " , and how i can rewrite a porlet which can relike when refresh page finish then automatic show information and users don't need click refresh Page.
Please help me .
Thanks in Advance.
John Henry

Similar Messages

Where's the information stored of the CLP (mycontacts)?

Hi all,
I have a question to the Collaboration Launch Pad CLP, for example accessing the CLP by
http://<myPortal>/irj/servlet/prt/portal/prtroot/com.sap.netweaver.coll.shared.ui.CollaborationLaunchPad
I'm able to add Contact Lists / Contacts / Room members to My Contacts.
The question for me is, where are theses information stored (where are theses groups and members of mycontacts stored) and is this user-dependend? (because I tried to login under 2 different users, but they both got the same contacts, perhaps as theyre both collaboration admins? But with a 3rd user, ha hasnt any users available under the CLP?)
In the CLP view My Contacts are displayed with <myname>_root
and in the URL there is a alias/%3Cmycontacts%3E to find.
But I had a look in KM, under the "userhome"-repository, but couldn't find there any stored information, relating to the mycontacts content?
Can somebody help me please?
Thanks
Best regards
Nenad

Hi,
This information is stored in the KM root folder --> ume --> contacts
You require the content administration role to access this information.
Go to Content administration -->KM content to access the KM root folder

Where is Login information stored for Blackberry Browser?

I have accessed several sites on my Passport that require usernames/passwords. Upon entry the Browser pops up a window and asks if I want to save the login information.
1. Where is that information stored?
2. Can that information be purged/wiped?
3. Can that information be edited?
Thanks.

1. I don't know exactly. In some cases information is stored in a browser cookie. I suspect when you tell the device remember login information that may be stored in a different database, but I don't know.
2. Browser > Settings > Privacy and Security > Clear Cookies and Other Data.
3. Not that I know. At least it isn't readily accessible to the user.
- Ira

Where the servlet information stored?

where the servlet information stored if I overriding the function getServletInfo? I am using Tomcat 4.1.12

It is stored in the servlet instance as a String variable. getServletInfo by default returns an empty String. When you over ride the method all of the information is stored in the servlet just like any other variable data.

Where is page information stored in DB or can I add a portlet dynamically?

I want to add a protlet to a page dynamically. I assume if I can find where pages are stored, I can look there for a hint. Does anyone know where they are stored?
Or
how do I add a protlet to a page dynamically? I suppose I could use a dynamic page, but what would be the sytax between the oracle tags to tell it to load the portlet?
thanks

I doubt that you can achieve this functionality directly.
For this you can get the clarification from the Content area discussion forum.
But still we have achieve this functionality in the indirect way.
Any component created can be exposed as portlet if you can set
the exposed as portlet => 1 in the table wwv_modules$.

Where is face information stored, and how can it be exported

I don't have the product yet, but after hearing our photographer's rave review of the faces feature, I'm wondering where iPhoto stores the faces information... and how that info can be exported.
does it get tagged in like exif info, or can the program export a per-file xml piece of information, or what?

If you are interested in mucking arond with iPhoto databases, I think you might be able to extract the information.
One way that will work is to create a smart album with the name of the person. This will create an album that is always up to date with that person's photos. You can then parse out the photos from the AlbumData.xml and figure out which photos have which that person in it.
Another way that doesn't involve creating smart albums (if you don't want those to clutter iPhoto) is to look at the face.db file. This file is an sqlite3 database that contains information about all of the "faces" in your database. You can see the contents of the database with the command
/usr/bin/sqlite3 face.db .dump > dump.txt
I haven't figured out what all of the fields are, but I'm sure that there are lines that contain ID numbers for the photos (which you can get from the AlbumData.xml file). I'm sure that someone will publish how to extract what you need from this file at some point (of course this is hacking around in the internal database from iPhoto which can easily change at any time). I haven't reverse engineered the format yet, but might do so at some point (I am also very interested in this information).
Ron

TS2529 where is the information stored from my iPhone when backed up on iTunes

I wanted to back up the info from my iphone onto my mac, however, I now have lost all my contacts,, info, messages, photo's etc

http://support.apple.com/kb/HT1766

Where is the iTunes to/from iPhone pairing information stored

When you sync an iPhone with iTunes it (the iPhone) has a continuted/ongoing relationship with that instance of iTunes. For instance if you try to sync the same IP with another iTunes installation you get prompted to that effect.
What I want to know is where is this information stored on the iTunes installation (for OS X), i.e. what information is this and where is it stored. I assume some UID is stored within iTunes to so that it knows that this partcular iPhone has a relationship with it.
Also I assume there's something stored in the iPhone itself (so that it knows which instance of iTunes it's related to).

Thanks - that works once it occurred to me to display the menu items. The actual solution I used was to enable Photostream on the Apple TV that is linked to a folder in Photostream. The advantage is that the set of photos is automatically updated in iCloud and I don't have to have my PC switched on to get the screensaver working.

Discoverer Portlets - Refresh Job

Hello Everybody,
I have a clarification related to the Discoverer Reports Portlets.
The Refresh of Discoverer Reports Portlets can be Scheduled to run as job.
I would like to know where can i find the information of the refresh of portlets jobs.
I am currently looking into the Portal Schema to find the table.
Thanks & Regards
Salih KM

You can set the scheduled refresh to occur at your chosen time automatically. It works pretty good compared to manual refresh even with parameter based portlets.
For example if you want to refresh every week on Monday @ 7AM type in may 12, 2008 and also 7:00AM and say refresh weekly.
Hope this helps,
-Esther

Refreshing Discoverer Portlets

Using 9iAS R2, we have set up discoverer portlets on our intranet and have serveral scheduled worksheets which display within portlets.
On one report I have scheduled it to run once an hour and I have also set the Discoverer worksheet porlet to refresh on an hourly basis - which it seems to do.
However, the data is not updating at all. It is only when we actually open the worksheet using Discoverer Plus and save that data in the Portlet refreshes.
When users click on the 'view worksheet' link and open Discoverer Viewer the correct data appears
Perhaps I have missed something . . is there another way to ensure that the data shown in the portlets is refreshed?

I believe that the refresh is set as a DBMS_JOB in the database, however, I have no clue where this is set, obviously somewhere in the product and/or identity metadata database depending on your configuration. Something that might be an easier solution is use something like HTTPClient from the Apache Foundation (http://jakarta.apache.org/commons/httpclient/) and write a small app that logs into portal as an administrator and then calls each portlet's refresh URL in order. It know its a workaround, however, it should work, that being said I've never tried it. I don't know if I'll get time to write it, but if someone gets a chance to write it before I do please shoot me the code :P
Matt Topper
TUSC, The Oracle Experts

How to change Refresh Time in a Discoverer Portlet?

Hi,
I have added a discoverer portlet to my main portal page. The minimum refresh time for the discoverer page i could set is 1 hour. Is there any way i could change it to 1 min as this is getting real time data in the database which i would like to display immediately.
Any help/suggestion is most welcome. Thanks in advance.
Regards
Goutam

Hi, i have the same problem.
i have searched both metalink and here but found nothing .. doesnt anybody know how to change the discoverer portlets refresh time interval anything other than 1 hour,1day,1week etc. (they are the only options available)
Any help would be appreciated.

Where is the port information stored in HSS for HSS mode Essbase servers?

In order to test .sec file validity, I started up a temporary server on port 1426. The .sec file was copied from an existing SS mode Essbase server. This worked fine and I stopped the temporary server. However, now in Shared Services, the Global "Analytical Server" instance inside the "Analytical Servers" project now points to port 1426. I can no longer manage the real server on port 1423 in HSS. Can somebody tell me where this port information is stored so I can change it?
I don't want to have to re-externalise and mess about like that because I tried this on a test box and got into a horrible mess because externalising creates new analytical server instances in HSS with a new index number which doesn't match the original one etc. Horribly mess.
This port number must be stored somewhere in HSS? It's not in OpenLDAP I think as I exported the whole server as LDIF and the string "1426" does not occur in the export. Couldn't find it in the HS9_HSS database either but perhaps I missed it.

For reference, I found out how to fix this:
Look in the Repository HS9_HSS for the table VERSION_CONTENT
in the HUGEBLOBS (which are XML fragments), you'll find the the settings. Export, alter, import.
Restart HSS and Admin services.

Where is owb user information stored in tables

Hi All,
I am using OWB Repository 10.2.0.4.0 . I need to know, where is OWB User information stored in physical tables of repository.
Please help me in this regard?

You can refer the following queries
1. select owner from dba_objects where object_name = 'ALL_IV_INSTALLATIONS' and owner not in ('PUBLIC');
2. select distinct grantee, substr(granted_role,5,25)
from dba_role_privs
where substr(granted_role,1,4)='OWB_'
and substr(granted_role,1,6) not in ('OWB_A_','OWB_D_','OWB_O_','OWBR_')
and default_role='NO'
and admin_option='NO';
Thanks,
Sutirtha

Discoverer Portlet Refresh Date

I have a Discoverer Portlet on a Portal page. Is there any way I can hide or not show the Last Refresh Date and Next Refresh Date from Discoverer Portlet?
Here's an example:
Graph or Gauge displayed and then at bottom there is:
Last Refresh Date 3/31/06 10:46 AM
Next Refresh Date 4/1/06 9:01 AM
Thanks in advance,
-- asit

If anyone's interested, i found a blog that shows how to remove it.
UIX Hack 2 Remove the Last Refresh Date from Discoverer Portlets
http://oraclebi.blogspot.com/2005/09/uix-hack-2-remove-last-refresh-date.html
Thanks Abhinav,
-- asit

Scheduled refresh of Discoverer Portlet is failed

Hello Experts,
I am now facing an issue while refreshing the Oracle Discoverer Portlets. thay are scheduled to run at specific intervals.
I am getting the following errors
Main Error for some portlets
5014> Element not found for: {cn=cf_a104, wbf=1, fm=xml, nlsl=en-us, aow=false, eul=EULNAME, arq=false}
For some other portlets.
5004> Attempt 1. CORBA protocol : 0 of 1 processes started.
Other portlets
5015>
I searched in the google but didn;t find any solution for this.
Please let me know if you have any inputs on this issue.
Thanks & Regards
Salih KM
Message was edited by:
kmsalih

Thanks for your input.
I got one document from Metalink.oracle.com
Note ID is 266540.1
I will post a reply if required.
Thanks & Regards
Salih KM
Message was edited by:
kmsalih

Discoverer Portlet - where is refresh information stored?

Similar Messages

Maybe you are looking for