Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Similar Messages

Will ATV 3 output from HDMI and Optical at the same time?

I'd like to use my apple TV to feed music to my main AV receiver while at the same time sending that same audio signal out the optical out connection to my other AV receiver that provides music to all of the rooms in my home. Right now it feeds the music to my main AVR via HDMI just fine but nothing to my other AVR.
Is this possible?

We've used an airport express since 'the beginning' - for years to get our Wifi from our cable modem in our garage while simultaneoulsy using it to output audio to a VERY old tuner in the garage. I have some nice outdoor Bose speakers connected to this setup which allows any mobile device wifi equiped to output any audio through my setup.... i.e. we usally use iTunes off our laptop while we are chilling outside. Perfect marriage of new school and old school technology.

How can I export Discoverer reports automatically from within PLUS ?

Hi,
I want to export Discoverer Repors it to PDF file. I can manually export my report as an PDF file, Now I would like to run this report and export the
PDF once a day automatically. Has anyone done something like this on
a Windows server?
I am using Discoverer (Oracle Discoverer 10g Release 2 (10.1.2.1), there is no Desktop version anymore, so I am using PLUS version, how can I apply this through PLUS version.
Any help.
Thanks,
Hani

Do NOT attempt to use CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD. This class and method is for use through the SAPGui and will NOT work within BSP. This information is completely incorrect!
There are lots of existing Weblogs on this subject. Have a look through them for solutions that do work.
/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table
/people/thomas.jung3/blog/2004/08/09/bsp-download-to-excel-in-unicode-format
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents

Problem with OWB export ext table from dev to prod not the same

Hi everyone,
I created a lot of external table in dev and everything works fine, but as I did a mdl export in production about half of my ext tables dont work anymore and I found in the script created by the export/import in OWB something strange: here is a exemple of script :
CREATE TABLE TBL_AGENTNOTREADYBREAK_EXT
STARTDATETIME VARCHAR2(23 BYTE),
DSTSTATUS INTEGER,
SWITCHID INTEGER,
AGENTID INTEGER,
NOTREADYREASON INTEGER,
INTERVALDURATION INTEGER,
INTERVALID INTEGER,
NUMBEROFTIMESPRESSED INTEGER,
DURATION INTEGER,
ROLLEDUP INTEGER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY SOURCE_FICHIER_LOCATION
ACCESS PARAMETERS
( RECORDS DELIMITED BY NEWLINE
CHARACTERSET UTF16
STRING SIZES ARE IN CHARACTERS
NOBADFILE
NODISCARDFILE
LOGFILE SOURCE_FICHIER_LOCATION:'NOTREADY'
FIELDS
TERMINATED BY '\t'
RTRIM
OWBUNUSED0 CHAR,
OWBUNUSED1 CHAR,
OWBUNUSED2 CHAR,
OWBUNUSED3 CHAR,
OWBUNUSED4 CHAR,
OWBUNUSED5 CHAR,
OWBUNUSED6 CHAR,
OWBUNUSED7 CHAR,
OWBUNUSED8 CHAR,
OWBUNUSED9 CHAR
LOCATION (SOURCE_FICHIER_LOCATION:'Stat_AgentNotReadyBreakdown_I.dat')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
in dev the OWBUNESED# does not exist it is rather the name of the field between double quote as they are in the first part of the script.
Why is that?, cause when I change the script in the database then my tables are accessing the data correctly. What caused this difference. Am I using the wrong method to deploy in Production?
Database version 10R2
Repository 10.2.0.4.36
Thank you all
Jacques

Hi Oleg,
Yes I did check the box for dependencies, you must note that I have something like 20 file definitons hence external tables and only 5 or 6 that had the problem, solving it by hand, still wandering what went wrong.
Thanks

Scheduling Discoverer Report and distributing Discoverer Report Output

Hi,
We are using discoverer (Along with Oracle HCM R12) and would like the END USER to schedule the reports by themselves.
There is an option to schedule the report, and also an option to share it to chosen users/ responsibilities.
We scheduled one report and also set the sharing option to share with others but it seems the report executes but doesn't get sent out by email to the END USER's email id.
Any ideas / thought on this please?
NB: We are looking to distribute Discoverer Report Output from scheduled Discoverer reports...not looking to share the report with other users/ responsibilities.

Hi,
My bad, Sorry as I was speaking on EBS terms.
Anyways, please see if the following thread helps you:
https://forums.oracle.com/message/4485585#4485585
https://forums.oracle.com/message/2777847#2777847
Also see the forum search:
Forum Search: Share report
Thanks &
Best Regards

Changing the seeded rdf report output from text to PDF

Hi All,
I am trying to change the seeded report "Print Requisition Report" output from text to PDF. I changed the output format in the concurrent program definition from text to pdf. The report is now getting displayed in pdf format, but the alignment of the fields are changed. The output is not printing as it was printing while in the text output format. The output looks very sloppy, with uneven fonts and too much of text wrapping.
I tried some formatting and fields are somehow getting displayed but doesnt look in proper format. I am not able to change the font style in the report builder 6i, even if i change it is printing in the same font style with uneven font size. I think reducing the font size might help, but i am unable to change.We are on 11.5.10.2. Please provide your valuable suggestions on how to go about.
Thanks
Sarvesh

Hi Hussein,
Thanks for the information. After the adjustments in the layout and the font change the report is now getting displayed without any clipping when clicked on view output. But when the same report is printed some characters on the left and and right side is getting clipped. Please help on how to solve this issue.
Thanks,
Sarvesh

Oracle reports output in excel format does not display the graphs

Oracle reports output in excel format does not display the graphs: "linked image cannot be displayed".
The output file in PDF format the graph is supported.

Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar

Yesterday suddenly the sound output from my Headphone is not working

Hi, I've Mac Book Pro 15" with Retina display. Yesterday suddenly the sound output from my Headphone is not working. When I tried to solve this, I've noticed in system preferences it's jumping from Internal speakers to Head phone and vice versa. Can anyone help me on this issue please? I am using the original Apple Headset only.
Thanks
Babu
<Re-Titled By Host>

Tell us:
OS X version ?
What may have changed prior to the onset of the issue of "... suddenly... not working..." and " ... preferences ... jumping from ..." ? Software added, upgraded, updated?
what precidely do you mean by " ... preferences ... jumping from ..." ?
ÇÇÇ
EDITadded
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " MacBook Pro " where it may get a more rapid response from your fellow users.
endEDIT

Is it possible to output multiple clips from a multitrack session, at the same time?

I'm using Audition CC 2014.2
on Windows 7 Pro x64
I am trying to figure out how to output several clips from a multitrack session, at the same time.
A session like this:
Is it possible to output 5 files right now?
I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
Any ideas?

They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
Ahh ok, use markers?
So, this sort of thing isn't possible in multitrack mode then?
If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
But, it seems like this functionality is currently missing.

Print output not the same

Hello.
I have a puzzle that I cannot seem to find a solution for.
When trying to print a PDF, one output is not the same as the other; let me explain.
- Open PDF > File > Print > Make sure "Fit to page" is selected > Print = Printout looking good.
However...
- Highlight PDF > Right click > Print = Document is not shrinked to fit, and I lose part of my PDF.
Is there a fix for this?
Using either Acrobat Standard 8 (to the latest update) or Adobe Reader 9 (to the latest update).
Thanks for any input, advice.

Ok, I can see from my first post that the question is not clear.
There are 2 ways to print a PDF document.
Option 1
Opening the PDF, going to File > Print or clicking on the Printer icon.
From there you get the print dialog and you select printer, properties, etc, etc, etc...
This one works fine.
Option 2
By going to the folder where the PDF is stored, right-clicking on the PDF and selecting print (without opening it). This one does give me the printout with the missing margins.
I've looked at the printer settings and printing preferences (from Printers and Faxes), there is no options that I could see to say to always make the document fit. Is there such a setting from inside Acrobat's preferences?
Hope this clarification makes my problem clearer to understand.

How to require licence from a different serverUrl (not the one in DRMContentData)?

Hi guys
I have a special request for requiring the movie licence from a different serverUrl (not the one I get from DRMContentData.serverUrl). I tried DRMManager.setAuthenticationToken with the new url but it didn't work.
Does anybody know to do it or is it even possible to do it?
Thanks.

Hi,
What is your particular workflow/use-case?
Unfortunately, the license server's URL is baked into the DRMContentData and cannot be modified once a video has been packaged. But, if you describe what problem you're attempting to solve, perhaps there is a different workaround.
cheers,
/Eric.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

Reading the output from a object running in the local machine.

Reading the output from a object running in the local machine.
By using a signed applet i am lunching a small application that returns an image object, how to read that without storing it in the hard disk.
Which means i need to read the image object return by the local application using applet or jsp .
i am using tomacat and an html page with an applet with it to lunch the application.

You can write that image in a binary format using OutputStream for System.out and then read it in your applet.

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

Similar Messages

Maybe you are looking for