Discoverer Server doesn't work (OAS 10.1.2)

Hello, I tried to create connection in Discoverer Plus service of Oracle Application Server 10g Release 2 (10.1.2). But I get an error as an answer and suggesion:
An administrator can further diagnose connection problems by running the "checkdiscoverer" script under <ORACLE_HOME>/discoverer/util.
This script tells:
Checking for Discoverer "ServicesStatus"...
"ServicesStatus" is running.
Checking the adminstrator set soft limit on no. of sessions ...
Current value of soft limit = 50 sessions.
Hint: Administrators can increase the soft limit on Discoverer sessions by modif
ying
"//ias-component[id='Discoverer']/process-type[id='SessionServer']/process-set/@
maxprocs" attribute in the file C:\Oracle\product\10.1.2\oracleAS\apps\opmn\conf
\opmn.xml
Checking for Discoverer Preferences component...
Found Discoverer Preferences component.
Binding to Discoverer Server...
0 of 1 processes started.
Error: Failed to bind to Discoverer Server.
Hint: Try increasing the timeout by changing the timeout value in opmn.xml.
Checking the amount of Windows heap allocated for non interactive services...
Heap memory size = 512 KB
The amount of memory allocated seems to be less. You will not be able to start m
any concurrent discoverer sessions.
The amount of heap allocated can be increased by modifying the 'SharedSection' p
art of "Windows" registry key under HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Control\Session Manager\SubSytems
Checking that the machine has only one network card...
Yes.

Hello,
The Discoverer Forum is here : Discoverer
Regards

Similar Messages

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

I configure the JServ , but Oracle HTTP Server doesn't work agian

my Oracle HTTP Server doesn't work after i've configured the JServ by Oracle Enterprise Manager.
when i run flowing command :
D:\oraias\dcm\bin>dcmctl getstate -v
and Error message : "ADMN-100999 Base Exception:
java.lang.ClassCastException:java.lang.Boolean" has shown.
and i navigate Enterprise Manager web site these Error Message showing:
"Your browser or operating system is not a supported client configuration for this version of Enterprise Manager. Using Enterprise Manager with your current client configuration may result in incorrect display of data or incorrect updates to configuration settings. See the release notes for information on supported client configurations. Root Cause: java.lang.Boolean. java.lang.Boolean"
how can i do? please help me.
THX

The key message -
mod_plsql: /pls/htmldb/htmldb_login HTTP-503 ORA-12541
Looking up that error gives -
[jes@spdb1 ~]$ oerr ora 12541
12541, 00000, "TNS:no listener"
// *Cause: The connection request could not be completed because the listener
// is not running.
// *Action: Ensure that the supplied destination address matches one of
// the addresses used by the listener - compare the TNSNAMES.ORA entry with
// the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to
// go by way of an Interchange). Start the listener on the remote machine.So it looks like the listener isn't running for your database to me (i.e. "lsnrctl start")

VPN on 10.3.9 server doesn't work

Hi evrybody,
i have a problem with vpn on Mac OS X Server 10.3.9 on a powermac with two ethernet;
All the configuration on the server seems to be ok, i turned on the l2tp, i turned off the firewall (so i can't have port problem), i told to the server can all groups can use vpn, i put starting ip 0.0.0.0 and end ip 255.255.255.255.
BUT, when i try to connect with my powerbook, by the LAN or by the gprs connection with cellular phone, i receive a message "the server doesn't reply".
If somebody had the same problem and can help me, thanks in advance.
Powerbook

Why did you enter 0.0.0.0 and 255.255.255.255 as the starting and ending IPs?
Starting and ending IPs are LAN addresses which you have allocated for the VPN.
For example, if your IP range is 192.168.1.1-254 and you expect no more than simultaneous VPN connections, you would enter something like:
Starting IP: 192.168.1.200
Starting IP: 192.168.1.205
Additionally, in the Client Information section, you need to add your subnet.
Click + to add and enter your network address (ex: 192.168.1.0) and subnet mask (ex 255.255.255.0)
Did you open firewall ports (or map NAT ports)?
Does the client attempt to authenticate, but fail? (you should see this in your log)
Get through these suggestions, make sure your firewall is configured properly and test again.
If that doesn't work, post contents of your log.
Jeff

Exchange server doesn't work at all after upgrade to 8.1.1

Hi there,
Upgraded to 8.1.1 yesterday and ever since getting mail from an Exchange server (not GMail as exchange, real exchange) doesn't work.
I have tried removing account and re-adding it again, it authenticates, all is dandy, but it never pulls the folders list or the mail at all.
Refreshing says "Updated just now", and then zilch, nothing, nada.
Can someone please help?
Thanks,
Vlad
PS. I tried resetting, wifi/3g, push vs fetch, all the standard knobs and whistles - nothing helps.

I just got my emails again, not sure what did the magic, but this is what I did:
- Downloaded my enterprise certificates (device provisioining) - Maybe you don't have to do this step.
- Reset the iPAD (press power button and menu button until you see apple logo -> this doesn't erase data on the iPAD)
- Deleted the exchange account
- Created the exchange account - at this time the iPAD could confirm credentials
After a couple of minutes emails started coming again!
Btw, I had this issue after upgrading to iOS 8.1.1.

Instant client 10.2.0.3 used with ms sql linked server doesn't work

Hi,
instant client version 10.2.0.3 doesn't work as microsoft sql linked server (both 2000, 2005) while 10.2.0.1 does. (tested by overwriting files in instant client directory - basic instalation, then restart mssql services) - the message is, that the oracle client is not installed when running sql (registration of linked server is ok).
Is it a known issue or is there any workaround?
(Windows XP, 2003, MS SQL 2005, MS SQL 2000, Oracle 9.2.0.6)
Thanks,
Pavel

I installed oracle-instantclient-basic-10.2.0.3-1.i386.rpm on a redhat box to
connect oracle database server 9.2.0.8.0 install on win box.Is there any other Oracle software installed on the RedHat machine?
In which directory did you install Instant Client?
Can you login with sqlplus?
On the database server, I defined parameters like this :
NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'
NLS_NUMERIC_CHARACTERS='. 'This will have no effect on your problem - these are client environment variables.
Before starting apache (lampp) I set Oracle environement like this :
export NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'
export NLS_NUMERIC_CHARACTERS='. '
My application worked very fine.
BUT a few days ago (1 week), in my application, the date format display wrong,
I have this format : DD/MON/YYYY even with
export NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'
before starting apache.The ancient question: Do you remember what you changed before it stopped working?
So I stop my apache and try set Oracle environment like this :
export ORACLE_HOME=/usr/lib/oracle/10.2.0.3/clientAs has been said, do away with that.
export PATH=$ORACLE_HOME/bin:$PATHYou don't need that either.
Except is might be nice to have the directory that contains sqlplus in PATH.
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATHNow that surprises me.
Normally, instant client shared libraries are not installed in a subdirectory.
Does this "lib" directory exist?
You should add the directory containing the *.so files to LD_LIBRARY_PATH.
When I restart apache and test my application, an error php message occurs :
Ocisessionbegin error while trying TO retrieve text FOR error ora-12705
I check my oracle_home, I don't think I make a mistake?It seems that Oracle cannot find the instant client shared library libociei.so.
This library must be found in LD_LIBRARY_PATH.
In this context it would be interesting to know (as I asked above) if any other Oracle products are installed on this machine.
Yours,
Laurenz Albe

Snow Leopard as PXE server doesn't work anymore with Debian Lenny

Hello
I was using a box with Mac OS X 10.6.2 as a PXE boot server, providing a Debian Etch installer as boot image.
I wanted to upgrade to the Debian Lenny PXE image, but it doesn't work anymore.
I m not sure how I can debug that. I m a sure of one thing, switching for the Debian Etch image to the Debian Lenny one triggers those kernel log messages during the PXE boot, and the host who tried to boot hanged ( a Virtualbox VM).
+Feb 23 20:34:33 macbookpro kernel[0]: indelayed_cksumoffset: ip_len 50688 (198) doesn't match actual length 212+
+Feb 23 20:34:58: --- last message repeated 6 times ---+
Here is my /etc/bootpd.plist file :
+<?xml version="1.0" encoding="UTF-8"?>+
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
+<plist version="1.0">+
<dict>
<key>dhcp_enabled</key>
<true/>
<key>bootp_enabled</key>
<true/>
<key>netboot_enable</key>
<false/>
<key>Subnets</key>
<array>
<dict>
<key>name</key>
+<string>My subnet</string>+
<key>net_mask</key>
<string>255.255.255.0</string>
<key>net_address</key>
<string>192.168.0.0</string>
<key>net_range</key>
<array>
<string>192.168.0.3</string>
<string>192.168.0.6</string>
</array>
<key>allocate</key>
<true/>
<key>dhcpoption128</key>
<string>192.168.0.10</string>
<key>dhcpoption66</key>
<string>192.168.0.10</string>
<key>dhcpoption67</key>
<string>/etch/pxelinux.0</string>
</dict>
</array>
</dict>
</plist>
My /private/tftpboot/ tree is created from the http://http.us.debian.org/debian/dists/etch/main/installer-i386/current/images/n etboot/netboot.tar.gz archive. I used http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/ netboot/netboot.tar.gz for the Debian Lenny tree.
So, can someone help me ?

I disabled bootp. In verbose and debug, everything seems to go well. The option 128 isn't accepted by the daemon, i disabled it too, the TFTP server is the same server than the DHCP, so it still works.
Here s the log when using the Debian Lenny image, almost the same than with Debian Etch image.
+bootpd[4754]: server starting+
+bootpd[4754]: can't open /etc/bootptab+
+bootpd[4754]: server name macbookpro.local+
+bootpd[4754]: interface en0: ip 192.168.0.10 mask 255.255.255.0+
+bootpd[4754]: interface vnic0: ip 10.211.55.2 mask 255.255.255.0+
+bootpd[4754]: interface vnic1: ip 10.37.129.2 mask 255.255.255.0+
+0.0.0.0 ==> 192.168.0.1+
+10.37.129 ==> link 8+
+10.211.55 ==> link 7+
+127 ==> 127.0.0.1+
+169.254 ==> link 4+
+192.168.0 ==> link 4+
+There are 1 entries+
+1. Subnet 'My subnet'+
+ Network: 192.168.0.0/255.255.255.0+
+ Range: 192.168.0.3..192.168.0.6+
+ Allocate: yes+
+ Lease Min: 3600 Lease Max: 86400+
+ Options:+
+ Code Length Data+
+ 66 4 c0 a8 00 0a+
+ 67 17 2f 6c 65 6e 6e 79 2f 70 78 65 6c 69 6e 75 78 2e 30+
+DNS servers: 89.2.0.1 89.2.0.2+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 8+
+dhcpmessagetype (uint8): DISCOVER 0x1+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP DISCOVER [en0]: 1,8:0:27:6a:89:5e+
state=INIT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP OFFER (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): OFFER 0x2+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: OFFER sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.007299 seconds+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 10+
+dhcpmessagetype (uint8): REQUEST 0x3+
+requestedipaddress (ip): 192.168.0.3+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+server_identifier (ip): 192.168.0.10+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP REQUEST [en0]: 1,8:0:27:6a:89:5e+
SELECT
state=SELECT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP ACK (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): ACK 0x5+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: ACK sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.001884 seconds+

Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!

Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
Is this a known issue and is there any solution for this?

Wow that is a new one, great find!
I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread. But too late, it's on the way back to Sony to get rolled back to Gingerbread.
Too many other problems with ICS that have crippled my device.
1) Wi-Fi Hotspot does not work anymore
2) USB tethering does not work anymore
3) LED notification issues for incoming SMS
4) Dialer slow to load
5) HD Video recording skip frames and jitter.
6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
If you have not done so take a look at the above features and see what you turn up.
~Cheers~
Bob H
Minneapolis, MN
USA
ST18a Ray

Ftp to a local ftp server doesn't work for VIREX 7.7

Has anyone else experienced this and know of a work-around? I have mac 10.3.9 machines not connected to the internet and running Virex 7.7. I have them setup to access signature files I download to a local ftp server on our subnet. This works fine.
We've installed a couple of Tiger (10.4.4) machines and this setup for Virex does not work. It acts like it can't see the ftp server. When I use Terminal I can ftp to the ftp server and transfer files that way. Why doesn't Virex 7.7 successfully download signature files from the ftp server?
Any suggestions?

I have been having the same problem. Our McAfee rep sent me a patch that apparently fixes the problem. Since McAfee issues DATs on Wednesdays, I ran the the e-update yesterday morning. It all seemed to run too quickly, but I checked the dates of the vscan files and they were correct. The files are:
names.dat
clean.dat
scan.dat
They located in /usr/local/vscanx/ (hidden files - you can download "Wizzard" to show/hide files).
I believe you can download the patch at:
ftp://custftp2.nai.com/outgoing/tier3/VRX/HF255495.sit
ftp://custftp2.nai.com/outgoing/tier3/VRX/HF255495.tar
ftp://custftp2.nai.com/outgoing/tier3/VRX/HF255495.zip
iMac Mac OS X (10.4.5)
iMac Mac OS X (10.4.5)

After transfer to new server, doesn't work

Hello iTunes U Administrators,
A short description about my iTunes U experience - none. I am a new hire at my academic institution, and it so happens that the folks with the most experience with setting up iTunes U have just left for vacation.
We just migrated our site to a new server, and iTunes U doesn't open any more. We are using the Perl script version. I have verified that Perl scripts are still able to run on the new server. The "https://deimos.apple.com/WebObjects/Core.woa/Browse/**.**" URL still works when I enter it into a browser.
We are using the version of Perl script that requires the following modules:
URI::Escape
Digest::SHA
Net::HTTP
I am checking with IT to verify that these modules are installed . We are using Perl 5.8.8 on Linux.
The main mode of failure seems to be that "aURL" is not being defined. Here is a snippet from our web page source:
{start of php section}
importrequestvariables("gp");
if($launch == "open")
passthru("valid-file-path/cgi-bin/itunespublic.pl");
echo "<script type='text/javascript'>openApple(aURL); </script>";
{end of php section}
In the perl script, the sub invokeAction() does not seem to assign a value to aURL, even as it generates JavaScript tags and "aURL =".
Any ideas?
- Larry
Message was edited by: XRayLarry

In regards to my question not shwoing up properly, other folks seem to have this problem as well:
http://discussions.apple.com/thread.jspa?threadID=1071301&tstart=30
I am going to repost as a new question, as I can't edit the original posting anymore.

VPDN PPTP server doesn't work after put it into an VRF instance

Originally we have one internet connection for our router which served as a PPTP server at the same time and everything worked well. Recently we got another internet connection, and we want it as a dedicated PPTP server interface. That means all the traffic except the PPTP data goes to the first internet connection. So we decide to use VRF (virtual routing forwarding) for the PPTP.
First attachment is the configuration that worked,
then is the broken configuration.
When connecting from a Windows client, the process would hang up at "verifying username and password". What's more, I used Wireshark and found that for the broken config, after pptp negotiations, the GRE data that contain ppp data cannot be exchanged, it seems the router cannot find way back for the GRE.

Thank you for your reminding me of this. I'am newly here, and I am really sorry that I've made you uneasy. But firstly, I doesn't think GFW is something officially documented in China's legislation. In fact, it is something the government tried to conceal but already known to all. So breaking through it is not illegal.
And what I want is just to get access to gmail, wikipedia, twitter, facebook, instagram and so on. And what's more, GFW has once blocked github and now, it blocks google entirely. I am a technical ecstasy not a politician. I just want to learn more freely.
Thank you all the way. And I feel fairly good with such a warm-hearted community. The arch wiki has really teached me a lot. Thank you.

CUPS printing to remote server doesn't work under Leopard

So i have an ubuntu system running cups 1.2.8 as a print server. i have an epson stylus colour 760 plugged in and configured and working.
i also had a macmini running tiger printing to it fine via ipp. now it didn't occur to me that something as simple (and important) as printing would be severely broken under Leopard. basically, after the upgrade, i can't print at all to the remote cups server.
the symptoms are that the job queue will pause; even after clicking on 'resume', it will start the progress bar, and then after 100%, it will just pause again.
i have on the cups server (qbic)
EpsonPrinter
Description: Epson Stylus 760 Colour
Location: Small Bedroom
Make and Model: Epson Stylus Color 760 - CUPS+Gutenprint v5.0.0.99.1
Printer State: idle, accepting jobs, published.
Device URI: usb://EPSON/Stylus%20COLOR%20760
And on the macmini:
qbic
Description: qbic
Location:
Printer Driver: Epson Stylus Color 760 - Gutenprint v5.1.3
Printer State: stopped, accepting jobs, not published.
Device URI: ipp://192.168.1.244/ipp/EpsonPrinter
None of the following work
- used lpd://192.168.1.244/EpsonPrinter
- tried ipp://192.168.1.244/ipp/EpsonPrinter
- tried ipp://192.168.1.244/EpsonPrinter
The error messages from the macmini are:
I [01/Jan/2008:23:19:52 +0000] Printer "qbic" started by "ytl".
I [01/Jan/2008:23:19:52 +0000] [Job 25] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 791)
I [01/Jan/2008:23:19:52 +0000] [Job 25] Started filter /usr/libexec/cups/filter/rastertogutenprint.5.1 (PID 792)
I [01/Jan/2008:23:19:52 +0000] [Job 25] Started backend /usr/libexec/cups/backend/ipp (PID 794)
E [01/Jan/2008:23:20:02 +0000] [Job 25] Destination printer does not exist!
E [01/Jan/2008:23:20:02 +0000] PID 794 (/usr/libexec/cups/backend/ipp) stopped with status 4!
I [01/Jan/2008:23:20:02 +0000] Hint: Try setting the LogLevel to "debug" to find out more.
I [01/Jan/2008:23:20:02 +0000] [Job 25] Backend returned status 4 (stop printer)
I [01/Jan/2008:23:20:02 +0000] Saving printers.conf...
The job never appears on the cups server jobs list; however a tcpdump does show that there is communication:
x@qbic:~$ sudo tcpdump -i eth0 port 631
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
23:27:55.397616 IP 192.168.1.204.49599 > qbic.ipp: S 3571921204:3571921204(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,timestamp 660419916 0,sackOK,eol>
23:28:05.490215 IP qbic.ipp > 192.168.1.204.49599: S 3610561258:3610561258(0) ack 3571921205 win 5792 <mss 1460,sackOK,timestamp 2498972 660419916,nop,wscale 2>
23:28:05.490269 IP 192.168.1.204.49599 > qbic.ipp: . ack 1 win 65535 <nop,nop,timestamp 660419916 2498972>
23:28:05.490285 IP 192.168.1.204.49599 > qbic.ipp: P 1:155(154) ack 1 win 65535 <nop,nop,timestamp 660419916 2498972>
23:28:05.490301 IP qbic.ipp > 192.168.1.204.49599: . ack 155 win 1716 <nop,nop,timestamp 2498972 660419916>
23:28:05.490315 IP 192.168.1.204.49599 > qbic.ipp: P 155:457(302) ack 1 win 65535 <nop,nop,timestamp 660419916 2498972>
23:28:05.490331 IP qbic.ipp > 192.168.1.204.49599: . ack 457 win 1984 <nop,nop,timestamp 2498972 660419916>
23:27:55.453575 IP qbic.ipp > 192.168.1.204.49599: P 1:26(25) ack 457 win 1984 <nop,nop,timestamp 2498978 660419916>
23:27:55.453705 IP 192.168.1.204.49599 > qbic.ipp: . ack 26 win 65535 <nop,nop,timestamp 660419917 2498978>
23:27:55.453804 IP qbic.ipp > 192.168.1.204.49599: P 26:225(199) ack 457 win 1984 <nop,nop,timestamp 2498978 660419917>
23:27:55.453861 IP qbic.ipp > 192.168.1.204.49599: P 225:354(129) ack 457 win 1984 <nop,nop,timestamp 2498978 660419917>
23:27:55.453919 IP 192.168.1.204.49599 > qbic.ipp: . ack 225 win 65535 <nop,nop,timestamp 660419917 2498978>
23:27:55.453959 IP 192.168.1.204.49599 > qbic.ipp: . ack 354 win 65535 <nop,nop,timestamp 660419917 2498978>
23:27:55.456571 IP 192.168.1.204.49599 > qbic.ipp: F 457:457(0) ack 354 win 65535 <nop,nop,timestamp 660419917 2498978>
23:27:55.456636 IP qbic.ipp > 192.168.1.204.49599: F 354:354(0) ack 458 win 1984 <nop,nop,timestamp 2498978 660419917>
23:27:55.669906 IP qbic.ipp > 192.168.1.204.49599: F 354:354(0) ack 458 win 1984 <nop,nop,timestamp 2498999 660419917>
23:27:55.670050 IP 192.168.1.204.49599 > qbic.ipp: . ack 355 win 65535 <nop,nop,timestamp 660419919 2498999>
23:28:08.470574 IP qbic.ipp > 192.168.1.255.ipp: UDP, length 183
Any help is appreciated!

The default setting under Tiger was CUPS, under Leopard it is Bonjour.
To access CUPS
http://localhost:631/printers/

Send mail using Internal Mail server doesn't work

I can't send mail using my companies mail server, which requires authentication and port 587 to send. We have a valid, non self-signed SSL certificate so that is not the issue. I can send mail using Bell's mail server but that violates our regulatory compliance obligations.
The server using POP3 and one must login to get mail as well as send. Unfortunately there is no otehr error message than the: error sending "mail subject". No further details are provided and when we check the mail servers logs its clear the Pre isn't even attempting to connect to the mail server. So the request to send mail isn't even being sent out. That could be an issue with the Pre or with Bell but Bell support will only troubleshoot to the point of fidning out if you can send using their mail server. We can so their support stops at that point.
I still have v1.3.1 of the WebOS as v1.3.5 doesn't seem to be out for the Bell Pre's yet. But from what I've read v1.3.5 is even worse at handling mail not better. However, there may be a solution out there to this beyond sending the Pre's back (I doubt we can) as Balckberry's and iPhone's don't have this issue.
Any advice is greatly appreciated.
Post relates to: Pre p100eww (Bell)

Further update on this problem. It does send if I use TLS instead of SSL so that must mean that the Palm Pre doesn't use SSLv3 or higher. As TLS is a viable security setting option to maintain compliance I can use that. But still Plam should seriously consider upgrading tis SSL versioning.

Automator "Connect to Server" doesn't work with spaces in volume name

I'm trying to use an old Automator Workflow I had set up in Snow Leopard that connected to a list of specified server mounts (both Windows smb:// and Apple afp://). It works fine for most of them, until it hits a mount point that has a space in it, where it fails. Looking at the debug area it looks like it's trying to connect to "smb://Server/Example%20Name" instead of "smb://Server/Example Name" and failing. Yet, when I use the "Connect to Server…" functionality in Finder, the same URL works just fine. Is there any syntax that will make this work correctly in Automator?

As I said I never used this before Lion and I don;t have any smb shares to test on but this is what I've found which may be of help:
The following workflow connects to my MB from an iMac:
Notice that the MB name is administrator's MacBook with a space and an apostrophe. Notice the %chars for the space and the apos so I don't think that the %20 for the space in your case is causing the problem.
When I tried this by entering afp://administrator's MacBook it failed. The error message showed the special chars converted as in the url that worked what was missing was the everything after the _ in the name.
When I did a connect to server in the Finder and selected Recent servers from the pull down and selected administrator's MacBook the url in the action above was shown. I copied the url from the server address line and pasted into the Automater action.
This might be of some help in your case at least it might show if the %20 is really causing the problem.
regards

Client login to OS/X server doesn't work after upgrade to 10.9.3

I have been running a Mountian Lion Server with open directory to handle several Mac's at home. After upgrading from 10.8.x to 10.9.3 a few days ago login from the client computer with 10.9.3 does't work. If I turn off Wi-fi, login works, and I can access everything after re-enabling wi-fi.
Works with client computer and 10.9.2. It also works with login to wiki on this server, using safari from my computer.
/Casi

I have several network user set up on a server computer. This computer, macMini, is running 10.9.3 and the latent version of OS/X server.
When logging in on a MacBook PRO with 10.9.3, and the computer is on the same network as the server, wi-fi or Ethernet cable, i'm not granted access to the network accounts. The screem-shot above is from the server log.
When not connected to the local network does login work.
Same issue with two network accounts. But, when trying a MacBook Air with 10.9.2 is it working with both these networks accounts.
If disable wi-fi, login and then enable wi-fi can I access all resources on the server as shared disks and replicate home directories. Same procedure works with the 10base6 Ethernet cable, i.e. Pull out the contact, login, put in in the contact.

Discoverer Server doesn't work (OAS 10.1.2)

Similar Messages

Maybe you are looking for