Discoverer stopped generating reports

This issue was reported by our customer and since I'm new to Discoverer, I have no idea what is going on here.
So, they have a batch file that generates reports every day (from what I gather). Starting Dec 30, it stopped generating reports. Aside from this, they noticed the log file contains different/various dates. Which shouldn't be the case since one log file is supposed to be created per call to dis51usr.
I wonder if any of you knows what may have causes these:
1) Reports stopped generating
2) log file spans multiple dates
They are using:
- Discoverer Client 10.1.2.48.18
- Oracle 11g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
Sample output in the log file:
1/2/2012 3:40:00 AM
C:\oracle\BIToolsHome_1\BIN\dis51usr.exe /connect user/password@db /open D:\Discoverer_Reports\Production\DIS\DailyReport.DIS /sheet All
/parameter InDate 1-Jan-2012 /batch /export HTML D:\Discoverer_Reports\Production\My_Reports\20120101_
1/2/2012 3:40:05 AM
1/5/2012 3:40:00 AM
C:\oracle\BIToolsHome_1\BIN\dis51usr.exe /connect user/password@db /open D:\Discoverer_Reports\Production\DIS\MyReport.DIS /sheet All
/parameter MyDate 4-Jan-2012 /batch /export HTML D:\Discoverer_Reports\Production\My_Reports\20120104_
1/5/2012 3:40:02 AM

Hi,
I don't know why your reports are not generated. You have given no information about how the batch job is run.
Each call to dis51usr does not create a separate log file unless the log file specified in the command is different. If the log file is the same each run of dis51usr will just append to the file.
Rod West

Similar Messages

Using Discoverer to generate Logminer Information

Hi all,
I need help on how to use Oracle Discoverer to generate reports on the information gotten from V$LOGMNR_CONTENTS view in the database.
Kindly assist in explaining the steps on how to go about it or any material/resource i can make use of.

Thanks for your reply, really appreciate it
But do you have any material/resource for detailed steps on writing:
1.Discoverer wrapper functions round the procedures in the DBMS_LOGMNR package so that i can start and stop the logmnr session by calling Discoverer functions from a worksheet.
2.develop a worksheet to start and stop the session .
3. To Develop another to report on the logmnr content
Any ideas on where i can get any documentation that will be useful in writing the functions and Developing the worksheets.

Generate reports in arabic using discoverer???

Hi All,
please help !!!!
How to generate reports in arabic using discoverer???
Thanks in advance

Hi
There is no problem reproducing report in Arabic. Could you please give more details about the problem you have ?
Thanks

Best way to generate report on huge data table

Hi,
I am using Oracle11g.
I want to generate reports on transaction tables containing huge amount of data, on which very frequently DMLs are performing in real time.
i want to keep my report/result in RESULT_CACHE for 15 mins. active. whenever any insert/update runs on main tables the RESULT_CACHE is getting invalidated
my question is can i control/stop RESULT_CACHE relies on(table_name) invalidating, as Oracle11g invalidating RESULT_CACHE automatically.
my requirement is to not hit the main table again&again.
pls help..
Thanks in advance.
Vinod

910575 wrote:
Hi,
I am using Oracle11g.
I want to generate reports on transaction tables containing huge amount of data, on which very frequently DMLs are performing in real time.
i want to keep my report/result in RESULT_CACHE for 15 mins. active. whenever any insert/update runs on main tables the RESULT_CACHE is getting invalidated
my question is can i control/stop RESULT_CACHE relies on(table_name) invalidating, as Oracle11g invalidating RESULT_CACHE automatically.
my requirement is to not hit the main table again&again.
pls help..
It sounds as if you're trying to avoid contention on a very busy large table while users are experimenting with relatively small fractions of the total data set. The type of thing you're doing is probably about the best approach - though it sounds as if you are not using global temporary tables which could save you a bit of time and contention when refreshing each private data set.
Ideally, though, you probably want a front end tool that does client-side caching - i.e. pulls the data into the front-end tool and lets the user rearrange it cosmetically there until the user explicitly requests a new trip to the database. I think Oracle Discoverer has (had) some capability in this area. What's the scale of the work the users are doing - can you give us a few scenarios about how much raw data they will extract and what they want to do with it before they refresh it ?
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Author: <b><em>Oracle Core</em></b>
P.S. Oracle does have client-side caching technology - but your ability to use it is dependent on the tools you use. You might want to go over to one of the developer or BI forums to see what they say about this problem; they may give you a different perspective on it.
Edited by: Jonathan Lewis on Jan 31, 2012 6:55 PM

Not able to generate report in AVDF 12.1

Dear DBA's,
I installed 12.1 database vault server on Linux and created agent on 11.2.0.1 on solaris.
The host status is showing running.
In Security Target > Monitoring > Audit Trail in this menu the collection status is showing stopped and i clicked on start still it is showing stopped.
i am not able to generate any report so far. Kindly help me how to generate report in AVDF.
Regrds,
SG

Hi gurus,actually this program selecion screen is linked to ..as
First screen is .Sop
.copa
Again for sop is having a selection screen and in this it is divide based on month and year seperately in two more screens.
same for copa also....
so pls tell me a correct solution where to correct and get values.
Priority is very highhhhhhhhhhhhhh,so pls help me in sorting out this.

Generate report from database using .xsl style sheet

I am trying to view test result histories for specific uut serial numbers.
We are logging all test data to the default access database template that was provided with Teststand.
Is there a method of generating reports from the database that match the format of those generated at runtime?
I was surprised to find that the default access database did not contain any gui or pre-made reports matching the xsl style sheets chosen in the report options dialog.
My database skills are weak, I am able to browse the raw data and I see the relationships between some of the tables, but the prospect of recreating one of the xml report formats in access seems daunting. Am I missing something? what is the best way to print a uut report from test data stored in access?

Hello msears,
Thank you for posting on the NI Discussion Forums. Unfortunately there are no tools available in TestStand for directly converting an Access database to a formatted .xsl report. It is possible to have a step in a sequence that reads the information from the database, and create the .xsl report as if it had been generated at sequence run-time, by writing those values directly to Locals.ResultList. Admittedly, this would require some knowledge of Microsoft Access, and the ability to write a program that will extract information from the database, in order to include it as a step in the sequence.
Is there anything stopping you from creating a formatted .xsl report when the sequence is run (instead of trying to create it from previous data stored in an Access database)?
Chris_G
Sr Test Engineer
Medtronic, Inc.

Getting error while generating report from Siebel (Siebel/BI Publisher)

Dear,
I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
But now I am facing two issues,
I am getting error "Unauthorized access, Please contact the administrator." when I open report on BIP which I have uploaded from siebel.
When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
(httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
(httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
(soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException' for operation 'runReport' exists in SOAP message.
(outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
Invalid User Name and Password for BIP Server
(xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
(xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
(bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Please help to resolve this issue.
Regards,
Soahil

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

How generate reports in TFS Manually ?

Dear All,
Due to performance issues we disable the reporting services. But, one of our client request for the report of "user stories progress" and "remaining work".
Database Server: Sql 2008 r2
TFS Server: Tfs 2012
Could someone help on how to get the report manually.
Thanks,
Rajukumar

Hi Rajukumar,
How did you disable TFS reporting service? If you disable reporting service via going to
TFS Admin Console -> Reporting ->
Edit -> Uncheck the Use Report check box, then the Analysis and Warehouse Sync jobs will stop. No new created work items go to Tfs_Warehouse database.
Please check this blog for enable & disable Analysis and Warehouse Sync jobs:
http://blogs.msdn.com/b/tfssetup/archive/2013/08/06/how-to-disable-a-tfs-warehouse-or-analysis-job.aspx
In addition, instead of disabling reporting service on the TEAM FOUNDATION level you can consider disabling it on the Collection level. For example, if you have so many team project collections and you want to generate reports for one collection. You can
disable reporting service for other team project collections, and enable reporting only for the collection you want to generate reports. With this way, no data from other collections go to Tfs_Warehouse or Tfs_Anaysis database.
To work with TFS reports, it is not a good idea to disable reporting.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Stop XL reporter

Hello,
Does anyone knows how to stop XL reporter in version 2007A
We are not using the add-on and we would like to stop the automatic start of the add-on in order to reduce the memory comsumption
BR

Dear Arnud,
In 2007A the XLR is already integrated to the core application. In order to totally remove it from the application it will be necessary to modify a value in the SBO-COMMON.
The side effect of such action is that the add-on will not be available for any database in your environment connecting through the modified SBO-COMMON.
In order to get back the add-on funcionality, it will be necessary to generate a new SBO-COMMON from the installation package (SBO-COMMON upgrader) for the version and patch in use, or to restore it from a previous backup.
Due to the modification of the database, it will be necessary to generate a message and schedule a webex with SAP Support to apply the change.
Regards,
Juan Manuel Marrero
SAP Business One Forums Team

Discoverer is generating incorrect SQL.

Hi,
I have one Discoverer Report which was running till last week, but all of sudden it has started giving the error 'missing expression'.
I got the query that Discoverer has generated from SQL Inspector and found that the below WHERE Conditions that discover has generated are incorrect.
AND (NVL (o188615.period_name2, 'NULL')(+) = 'FEB-07')
AND (NVL (o188614.period_name1, 'NULL')(+) = 'JAN-07')
Ideally discoverer should have generated the above conditions as mentioned below. It's generated the outer joins incorrectly.
AND (NVL (o188615.period_name2(+), 'NULL') = 'FEB-07')
AND (NVL (o188614.period_name1(+), 'NULL') = 'JAN-07')
Did any one faced this issue earlier. If so, please help me in fixing this.
Advanced Thanks,
Lokesh.

I have one Discoverer Report which was running till
last week, but all of sudden it has started giving
the error 'missing expression'.This leads me to believe something changed - folders, joins, BA, tables, views, versions, and a host of other things. Has anything changed within the last week?

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

How to test a generated report in my application by using web test written with Visual Studio 2012 Ultimate

Hello,
My application generates report in different formats, such as: Adobe, Excel, XML, CSV and HTML
I have a webtest that makes all preparations, then generates a report.
In my application I have an option either to save the new generated report or open it.
When I try to open the new report, the web test doesn't see it and therefore not allows me to test it.
Please refer me to knowledge base or let me know how to resolve this type of issues.
Thanks.
qatm

Hi qatm,
Thank you for posting in MSDN forum.
Since this web performance test is used to verify the Http request/respond work correctly in VS, and the browser session is then displayed as a list of URLs in the Web Performance Test Editor.
However, as you said that you want to test a generated report in my application by using web performance test in VS2012 Ultimate. If the report is not as the Http format, so I think that it is not possible to test a generated report by using web performance
test.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to generate report for size of KM folder

hi all,
i want to generate report for size of folder in KM.I am havingthe following roles content admin,content management,system admin,home, are these roles sufficent to generate report or any roles are needed?
And other issue is after going into Content management role I am clicking reports workset but I am unable to see "Folder Size Calculation" option, any full access are needed to see it.
I am following help.sap link plz don't send it ,give me any other Material.
After starting the Km report in Resource Statistics its showing size as zero.
help me in sloving this issue.
thanks in advance,
Aravind

You could find all KM reports to the given navigation
try all these paths...I am unable to findout your issue definitely permission related
System Administration -> System Configuration -> Knowledge Management -> Content Management -> Related Topics -> CM Repository Reports
Content Administration -> KM Content -> Toolbox -> Reports
Content Management -> Reports
Regards
Koti

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra positi

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.

Discoverer stopped generating reports

Similar Messages

Maybe you are looking for