Discoverer Web Viewer and Charts

I did a search in the forum and saw no previous discussions on this subject. So, here's the question. I've developed a worksheet with a graph in Discoverer Plus 4.1. Now the question is how does one display this graph on the Discoverer 4i viewer (Web viewer)? I've looked under Presentation and it has "Chart Area" clicked ON, but the chart doesn't show. Any ideas?
Thanks,
Kerry Brannen

Thanks Andy, you've answered the question (I think). I created the chart with the DeskTop version and figured it was only logical that since everything else created in Desktop version is viewable on the web, then the chart should be as well or why else would Oracle have put it there?
So the question is, how do I access the "Discoverer Plus Applet" and create a chart? Is there documentation?
Thanks,
Kerry
P.S. We had already set the <argument name="show_graphs">true</argument> .

Similar Messages

Web view and Page view

I would like my document to be the same in web view and page view. When I move the page breaks in page view it messes up the web view so that one page runs into another. How do I make my document look uniform? I am using a Mac and Safari web browser.

Hi,
Could you please share your form with me ([email protected]) so that I can help to resolve this issue? Instructions on how to share a form can be found here - http://forums.adobe.com/docs/DOC-2462.
Thanks,
Brian

Tweaking defaults of Discoverer 10g (Viewer and Plus) login page

Using information gleaned from the Metalink notes referenced below, we've had our admins successfully configure our default Discoverer 10g login pages (for Viewer and Plus) with the following tweaks:
1) Remove the "typo-prone" entry box for RESPONSIBILITY (on an Apps-Mode EUL) in favor of the subsequent drop-down LOV option to select available responsibilities
2) Re-order CONNECT TO options to make the more frequently used APPS-MODE option first in the drop-down list, followed by the STANDARD (relational) and finally, OLAP (to be hopefully implemented at some future date)
3) Re-label CONNECT TO options with terminology more understandable to our end-users in order to better understand choices
We would like, if possible, to further enhance the relative efficiency of the user login experience by making the APPS-MODE option the default selection upon initial entry to the page (the above-indicated re-ordering of the entries didn't appear to affect Oracle's continued default selection of the STANDARD option).
If anyone has any suggestions / tips to accomplish this, we would greatly appreciate your feedback. I should also say, that we don't possess a lot of Java Development skills and therefore would appreciate any directions provided in a "cookbook/recipe" manner similar to those provided in the Metalink documents we were able to utilize for the changes made thus far.
Thanks in advance.
Metalink
Docs Desciption
312463.1-How To Customize Oracle Business Intelligence Discoverer 10g (10.1.2) Connection Page
342255.1-How To Remove the "End User Layer" option Customize Discoverer 10g (10.1.2) Connection Page

Hi
I would have to suspect that the answer to the question of restricting responsibilities might well be yes.
Here's one idea:
Because responsibilities come from FND_RESPONSBILITIES, can you write a piece of SQL that positively identifies the responsibilities that are used inside Discoverer? If you can do that, I'm wondering whether a Discoverer logon trigger might be able to set a VPD policy to only allow those responsibilities.
I don't have any time to try it otherwise I would. Is there anyone who can pick this up and run with it to see what can be made to happen?
Best wishes
Michael

Problems with fast web view and really large PDF files.

If "allow speculative downloads in background" is set then the Fast Web view becomes nonfunctional. Reader is makeing the HTTP Byte range requests but will ask for almost the entire PDF file in one range (180 MB of the 182 MB file).
If "allow speculative downloads in background" is not set then Fast Web view is working fine, Reader is making more HTTP Byte range requests but the larges ones are still small 20K or so.
Is this behavior being experianced by anyone else?
What are the disadvantages, if any, of having "allow speculative downloads in background" turned off?
My environment:
182 MB pdf file (Optimized) around 41,000 pages. I have also seen this with 42 MB and 25 MB pdf files.
IE 6
Reader 9.2
Apache webservers (On Solaris Apache 1.3.20 and Linux Apache 2.0)
Thanks in advance
Angus Laidlaw

Hi,
The signing tool use Capicom (Library from .NET) to generate attached digital signature. I also tried signing with .net class SignedCms but the result is the same. What I don't understand is why some PDFs are working and others are not.
For example, I uploaded here a signed PDF which can be opened up succesfully: http://dl.dropbox.com/u/104591126/PDFs/Signed_Dummy1.pdf (it is the same PDF but I didn't enable the fast web view)
Can you suggest other signing method?
Thank you.

AppleScriptObjC Web View and Image Well

Ok, so I have been working on this for a long time now and I can't figure it out. Here is what I need to do: Load an image from the web to an image view or load a url in a web view. Here is what I tryed: http://macscripter.net/viewtopic.php?id=28459 but with:
set imageURL to "http://www.google.com/intl/en_ALL/images/logo.gif"
tell current application's class "ImageLoader" to loadImageInImageView(imageView,imageURL)

Your method call is not formed correctly. In AppleScriptObjC, an underscore acts as a placeholder for the parameters in the equivalent Objective C method. For example (from your linked page):
+ (void)loadImageInImageView:(NSImageView *)theImageView fromURL:(NSString *)url
becomes:
loadImageInImageView_fromURL_(theImageView, |url|)
(the url term in the above example is surrounded by pipes because it is an AppleScript reserved word)

InDesign - export a PDF for web view and print

I have a brochure created for print in InDesign. I need to create a PDF for the web, that would be a link to download and print on a home printer. How do I accomplish this?
Thanks for any help!

export smallest size or take the print PDF in to Acrobat and reduce the size there.

Creating a pdf for web viewing and printing

I need to create files in pdf format from indesign cs6. They are educational units will go up on a website to be downloaded for good quality printing. Which options do I have? I am not too familiar with this process. Thank you for your expert suggestions

Use the PDF/X-4 preset

Acrobat Pro 10 Actions Not Applying Fast Web View

Acrobat Pro 10 actions are pretty useful overall, however they are not applying Fast Web View all the time. In my opinion, all PDFs generated today should be Fast Web View by default, but among the many applications which allow for PDF creation, not all apply Fast Web View for some reason.
I did see http://forums.adobe.com/message/3335827for a potential band-aid fix. Unfortunately, it did not work for me.
Here is the text from my Action sequence file:
<</Commands [/c << /0 [/c << /Config [/c <<   /UIPolicy [/i 3]
>>]
/HandlerName [/a /FlattenOCGs]
/Params [/c <<>>]
/Title [/t ()]
>>]
/1 [/c << /Config [/c <<   /UIPolicy [/i 3]
>>]
/HandlerName [/a /ReduceFileSize]
/Params [/c <<   /RFSCompatibility [/i 6]
>>]
/Title [/t (Reduce File Size)]
>>]
/2 [/c << /Config [/c <<   /UIPolicy [/i 3]
>>]
/HandlerName [/a /ExamineDocCmd]
/Params [/c <<   /RmAnnots [/b false]
   /RmAttachments [/b false]
   /RmBookmarks [/b false]
   /RmDeletedContent [/b true]
   /RmFormFields [/b true]
   /RmHiddenLayers [/b true]
   /RmHiddenText [/b false]
   /RmLinksActionsJS [/b false]
   /RmMetadata [/b false]
   /RmOverlappingObjects [/b false]
   /RmSearchIndex [/b false]
>>]
/Title [/t (Remove Hidden Information)]
>>]
>>]
/Input [/c << /FileVariation [/i 3]
>>]
/Output [/c << /AddToBaseName [/b false]
/DontOverwrite [/b false]
/EmbedIndex [/b false]
/FileVariation [/i 2]
/HandleOutput [/b true]
/NumbericNaming [/b false]
/OptimizePDF [/b true]
/PresetName [/t (test2)]
/RunPDFOptimizer [/b true]
>>]
>>
As you can see, the "/OptimizePDF [/b true]" is set per the instructions in the aforementioned link. It still does not set Fast Web View all the time. I ran a test of the action on a batch of 10 PDFs, some were set to Fast Web View and some were not. While one of the PDFs that was not set to Fast Web View was open in Acrobat, I ran the same Action again and it did apply Fast Web View! I even installed the latest patch hoping that would fix it, but unfortunately it did not. Distiller does in fact set Fast Web View, but it won't work on PDFs. The only way I can find to guarantee the establishment of Fast Web View is to manually do a Save As on every file which I think is asking a bit much when you deal with hundreds of PDFs on any given day. Also that would effectively defeat the purpose of running an Action on hundreds of PDFs in the first place.
Any ideas?

There is a bug because of which fast web view is always disabled. While that is fixed, here the workaround. Save the action and open the .sequ file in Notepad. Change:
                /OptimizePDF [/b false]
to
                /OptimizePDF [/b true]

Issue with multiple digital signatures disabling fast web view

Hello, I'm using acrobat 9.1 pro and have some questions regarding an issue using multiple signatures on a pdf.
Why am I asking the question below? My job involves preparing pdf's for submission to FDA. The FDA requires, among other things, that electronically submitted docs have fast web view enabled.
I am currently exploring ways of using digital signatures to sign pdf reports and still make sure they are FDA spec compliant. My issue involves a document that would have multiple signature fields. What I do is create at least two signature fields in the doc and then save and optimize while enabling fast web view. When I sign the first box and save, the file retains the fast web view status. Yet, when I apply and signatures past the first one, the file is subsequently set to fast web view off without any obvious way of turning it back on. I am confused as to why it gets disabled only after the second, and not right after even the first one was signed. And, of course, I would like to know if it is possible to maintain fast web view and how to do it. I'll gladly accept "tinkering under the hood" of the file suggestions if they exist as well.
Please let me know if anything is unclear or you need further information.
Thanks for your time and help.
~Vlad

Hi Vlad,
Michael actual had the correct answer. The purpose of a "Linearized" file (i.e. a file that has been Optimized for Fast Web View) is to get the first page to display as soon as possible so you can start reading without waiting for the rest of the file to download. As an aside, the designated first page doesn't necessarily have to be page 0 (PDF's use a zero based counting system for pages), but usually it is. To quote the PDF specification, "The primary focus of Linearized PDF is optimized viewing of read-only PDF documents. It is intended that the Linearized PDF be generated once and read many times. Incremental update is still permitted, but the resulting PDF is no longer linearized and subsequently is treated as ordinary PDF."
When you sign a PDF file the first time the Save process is a "full save", that is the entire document is rewritten so there are no more than two %%EOF (end-of-file) markers in it. The first EOF designates which page to show first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second (or subsequent) signature the file is saved as an "incremental save" and all of the new data is tacked onto the the end of the original file. This is so you can do a rollback to the previous signed version and allows Acrobat/Reader to check the integrity of each signature independent of any other signatures. It's the incremental save that breaks the linearized optimization of the file.
Steve

I can't logon to Discoverer 3i Viewer

Computer config:
Window 2000 Server
Oracle 9iAS (include Discoverer 3i VIEWER and Server)
Another computer config:
Window 2000 Server
Oracle 8iDS (8.1.6)
Error occur when I try to log on to Discoverer 3i Viewer. The error message is:
Authentication Failed.
(You do not have access to any End User Layer tables)
Therefore, I downloaded 'Discoverer Administration Edition 3.1.36 for Windows NT' to install it in Oracle 8i DS so that I can create 'End User Layer'.
The Oracle DS and the Discover 3i need to be installed in the same Directory(c:/oracle/oracle81). But, The Oracle Installer of the discoverer forbid to doing that. The error Message is:
The location specified, "D:\Oracle\Oracle81", is already in used as an Oracle home for "Oracle 816 Production"
It cannot be used as an Oracle home for 'nt'
If I try to install the discover 3i in different oracle home. The following error message appear:
Oracle Discoverer does not support multiple installation and therefore cannot be installed on "OraHomeDiscover". It can only be installed on OraHome81.
What do I need to do so that I can run the 'Discoverer Administration Edition'? Do I need to use Discoverer 4i for oracle 8.1.6?

Discoverer will be officially supported on Win2000 Servers with version 4.1.37, due out with 9iAS 1.0.2.2.
Regards,
Discoverer Team
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Luk:
Computer config:
Window 2000 Server
Oracle 9iAS (include Discoverer 3i VIEWER and Server)
Another computer config:
Window 2000 Server
Oracle 8iDS (8.1.6)
Error occur when I try to log on to Discoverer 3i Viewer. The error message is:
Authentication Failed.
(You do not have access to any End User Layer tables)
Therefore, I downloaded 'Discoverer Administration Edition 3.1.36 for Windows NT' to install it in Oracle 8i DS so that I can create 'End User Layer'.
The Oracle DS and the Discover 3i need to be installed in the same Directory(c:/oracle/oracle81). But, The Oracle Installer of the discoverer forbid to doing that. The error Message is:
The location specified, "D:\Oracle\Oracle81", is already in used as an Oracle home for "Oracle 816 Production"
It cannot be used as an Oracle home for 'nt'
If I try to install the discover 3i in different oracle home. The following error message appear:
Oracle Discoverer does not support multiple installation and therefore cannot be installed on "OraHomeDiscover". It can only be installed on OraHome81.
What do I need to do so that I can run the 'Discoverer Administration Edition'? Do I need to use Discoverer 4i for oracle 8.1.6?<HR></BLOCKQUOTE>
null

Web Viewer stettings

Hi guys !
I'm working on adobe web viewer and I wanted to know if I can change its size.
I use a 768x1024 iPad rendition and when it display on a computer screen it's too big and I need to scroll down to see the bottom of viewer.
Can I change viewer size in source code or do I need to publish a new rendition with a lower size.
Regards,
Franck Soulier
Edit : 2 screens
What I have :
What I need :
I zoom out at 75% in my browser to get my last sreenshot

Thanks for that quick answer !
I'll make a special web viewer rendition.
But I have a new question about renditions.
Is there a way to avoid all those copy/past for each article's descriptions, title, etc.
Every month I'll make 4 renditions (iPad, iPad retina, Android, and now web viewer). 3 fields (heading, title and descriptions) to fill for each articles (about 50 per folio) in folio producer.
That means 150 copy/past per rendition, 150 x 4 ! 600 ! And I don't count all the 200 images I need to upload for feature summary. It's really take a very long time each month...
Is there a way to fill all those descriptions once and for all ? Perhaps in indesign file...
Regards,
Franck

Digital Publishing Suite Web Viewer

I saw this demo (http://stage.adobepublish.com/s/f72c05c4-8e54-4ea6-a633-aeb5b8738511/6-monaco.html) for the Digital Publishing Suite Web Viewer and I'm trying to figure out how to get my folio to display like in this demo?

Please refer to belows:
http://helpx.adobe.com/digital-publishing-suite/kb/setting-dps-app-social-networking.html
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-12e05bfc12f6c86d767-7 ffe.html
1st: The folio's Ptotect Off at Folio Producer (DPS Dashboard)
2nd: Publish or Update the folio
3rd: Mail button at the folio protect-off on Viewer app.
4th: The Web view Link is showed in the mail message.
I hope this helps you.
shimoawazu

How in Discoverer 4i viewer (Web) to set the size of the Chart(Graph)?

Hello all,
How in Discoverer 4i viewer (Web) to set the size of the Chart(Graph) by default?
Thanks very much for any help.
Dmitriy Zhabrovets

Hi,
I had a look and don't ask me why but it seems that you can't add extra rectangles in a sub table. But weirdly, it seems possible to add tables.
I mean you can't add a rectangle using
app.activeDocument.textframes.tables.tables.cell.insertionpoint.rectangles.add
//remove any reference, that's conceptual at this time.
The idea I had at the first place but put aside cause to its heaviness is to cheat.
Instead of adding the rectangle, we are going to copy & paste it.
So let's keep all the things you need (rectheight & rectwidth).
But this time, let's use
var oRect = app.activeDocument.rectangles.add({geometricBounds:[0,0,rectheight,rectwidth]});
//You may need to use app.activeDocument.pages[x]... if you have a multi pages doc.
app.select(oRect);
app.cut()
app.select(oInsertionPoints.item(-1));
app.paste();
heavy but it works.
Loic

BEx WAD - Creating a Web Template with Chart and Table

Hi All.
I am creating a new Web Application. This contains a dropdown with 2 reports to select.
When the user selece report from the dropdown list, it has to display both Table and Chart for the report.
Could you pls explain me how can I do this.
Thanks
SR.

Still the same way pretty much but you can view here:
http://helpx.adobe.com/business-catalyst/using/add-blog.html
You got all this: http://forums.adobe.com/community/business_catalyst/documents
Which is on the overview page of these forums. And in there are links to 3rd party resources too.

Web content and viewer UI issue

I have a pure CSS3 bar chart web content overlay which has several buttons and radio button for the user to interact with which animated the data of the graphs. My issue is that every time I tap on an interactive element the viewer app UI keeps showing and hiding on each tap.
I've created another bar graph with jQuery and have the exact same issue. I've used web content with other HTML assets both jQuery and CSS3 and these navigational elements don't have the same problem.
Is it the fact that I'm using form elements to trigger the interactivity istead of links?
I've also ran a test using http://www.oesmith.co.uk/morris.js/ donnut chart which is jQuery/SVG based and I get the same issue.
Any clues?
Many thanks!
Mariya

You need to make sure that your JavaScript code indicates it has handled the tap events. If not you'll wind up with the event bubbling up to the viewer and triggering our navigational UI.
Neil

Discoverer Web Viewer and Charts

Similar Messages

Maybe you are looking for