Discovery does not remove deleted objects

Well,
another issue with discoveries.
We are running discoveries via datafile:
The discovery DataSource script reads the datafile and creates the objects.
That's very nice and works perfectly.
Added entries in the datafile are discovered on the next discovery cycle.
Unfortunately if you delete some entries from the datafile the discovery does not delete the objects in SCOM.
Discovery's datasource writes a logfile and the deleted entries from the datafile are really no longer discovered
( I'm happy that reading files is a reliable function...).
So for this cycle discovery data contains some objects less than before.
But this new discovery does not lead to a deletion of no longer existing objects.
As a workaround we put these superflues objects in maintenance mode.
Would be gratefull if somebody has a good solution
regards
sebastian

Please run "Remove-SCOMDisabledClassInstance” from the Operations Manager PowerShell
console.
You might get some errors after running this. Errors are about the ObjectIDs and RuleIDs, but you can ignore those errors and should keep running this command until it completes successfully.
After completing successfully, the deleted objects will be removed the discovery and SCOM.
Hope this helps.
Thanks, S K Agrawal

Similar Messages

When synchronization does not remove deleted programs

Sorry, translating from Russian by Google.
I have a problem appeared. before that it was Itunes 10 + iphone, it was no problem. When you remove programs from your computer when you sync itunes asked what to do with this program for iPhone. Switched to Mac, itunes 11, the entire base endured logged in, check in the program is the "Automatically ...", New programs downloaded, but if I remove the poppy program, after synchronization, it stays on the iPhone. What to do? This is very inconvenient.

Please run "Remove-SCOMDisabledClassInstance” from the Operations Manager PowerShell
console.
You might get some errors after running this. Errors are about the ObjectIDs and RuleIDs, but you can ignore those errors and should keep running this command until it completes successfully.
After completing successfully, the deleted objects will be removed the discovery and SCOM.
Hope this helps.
Thanks, S K Agrawal

Re-importing FDM application from XML not removing deleted objects/records

I migrated our FDM application from one environment to the next environment, by exporting the FDM application from the source environment to an XML file and subsequently importing the FDM application XML file in the target environment. This appeared to work fine.
After some updates were then applied to the source environment, I re-exported the FDM application to an XML file, and re-imported this in the target environment.
However, I have noticed that:
- Import Scripts that were deleted in the source application still remain in the target application.
- Mappings that were deleted in the source application still remain in the target application.
- Extra mappings that were added in the source application have been added to the target application.
So we now have duplicate mappings in several tables and scripts that should have been deleted in the target environment!
It appears that the "Import" process is more of an update, rather than a drop and replace. There is no "replace" option on the import process. Can anyone please advise how one should correctly migrate an FDM application between environments? At present, it seems to me that the whole application will need to be completely dropped/deleted (including the SQL database/Oracle schema) and re-imported all over again from scratch.
Surely there must be a better method?!!

Here is Oracle's response for anyone else who requires further information on this:
"Hello,
The Import of the .xml files in terms of application creation is meant as a 'once only' event and a result is not meant as a method of post-create administration of the application. Any further imports will just add metadata to the application not replace or merge. If you wish to migrate an application via this method then you will need to get the source application into the state required for the migration then migrate this as a whole. Please note that this will only migrate the metadata of the application.
The other method of migration as you have mentioned in the SR description, is via the database which will migrate the entire application with data.
Please see KB article 806173.1 which gives instructions on the two methods, both of which are the only recommended methods. Please review the article to suit your requirements.
Thanks"

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the o

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the old backup's ?

Does this remove delete the old backup's ?
No, they are all just fine.

How to remove history in the location bar? Deleting history and then using "History" only in the settings for the location bar does not remove old history.

I want to remove ''old History'' in the Location bar.
I am using Firefox 3.6.13.
"Clear recent history" does not remove the old History in the Location bar. And changing the setting to only show "History" does also not remove the old history.
Pressing "Delete" on single lines when opening the list by clicking the arrow to the right in the location bar, remove the entries temporary. But next time you type in the location bar, the same suggestions are there.

See:
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]
Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
This will open the "Edit This Bookmark" dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry.

Why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all!

why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE

Trash – Empty When File is Locked or in Use
Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
Trash FAQ
Trash Permission Error
Trash Permission Error (2)
Trash Permission Error (3)

Hp C310 e all in one. Print that is stuck in the print queue, cancel does not remove

hp C310 e all in one. I have a print that is stuck in the print queue, cancel does not remove says deleting. I have tried shutting down printer, closing word doc, multiple canel all prints. Any Ideas

Hello mackice,
Try these steps below to clear the print queue. The steps are listed for Vista and Windows 7 and would be slightly different for XP. If you are using a Mac then the steps below would not work. Please advise what OS you are using.
Option 1)
1. Click on start orb
2. Type in search window: "services.msc" (without the quotes)
3. click ok
4. Scroll down to Printer spooler service and click on it in the right side window.
5. On the left side click stop the service and wait forthe process to stop
(Do not close the window yet. You will have to restart it here later.)
6. next delete the print job in the printer queue
7. then restart the spooler service
8. Resubmit your new print job.
Option 2)
If that doesn't clear it, the next step would be to stop the spooler
service as stated above
Go into windows explorer
(Print job data is collected and stored in a spool file in the spooler
folder.)
It is located in:
C:\WINDOWS\system32\spool\PRINTERS
Your print job will show 2 files there Example below:
00002.SHD
00002.SPL
Delete the files located in there. There may be several of them
depending apon how many print jobs you submitted. You will have to
resubmit your print jobs all over again.
Next go back to services window and restart the spooler service
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Updating F_BKPF_KOA does not remove SOD Issues

Hi,
We have recently installed GRC 5.3 and are currently working through SOD issues located in some roles, however we have found that trying to restrict a Function in the Rule Set does not remove the SOD Issue:
Example:
We have created and AP Processing Role and based upon the Standard Rule Set FB02 is causing an SOD issue with itself.
Functions AP02 and GL01 are being called, I have enabled F_BKPF_KOA, ACTVT 01,02 and KOART S in the GL01 function (authorisation for KOART - S not present on the AP Processing Role), this has been saved and the Rules updated, yet the issue persists.
Any advice???
Thanks
Craig

Craig,
i got it.
things are working perfectly as designed.
now let me explain how RAR do analysis.
it will pull Role Data and Rules data (enabled one only) and then do comparison one by one.
first it will check for relevant tcode (we are doing persmission level analysis)
then it will compare all objects in role with object in that rule (in your case it is 02907N01)
then field values will be compared
IF FIELD VALUES IN RULES EXIST IN ROLE ALSO, THEN IT IS CONFLICT
hope you get my point.
now in your case.... you are trying that if you disable ACTVT 03 , the conflict should not show.
sorry you are going wrong way...
now your rules say if any user have ACTVT 01 OR 02, then it should show conflict.
and yes ROLES do satisfy that.
remove 02 and 01 from role only then it will not show conflict.
tried my best to explain
please let me know ........
regards,
Surpreet

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here.

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

If it says package net.jini.discovery does not exist,whar should i do?

if it says package net.jini.discovery does not exist,whar should i do?i'm compiling using the command prompt.but i write the program in jcreator.help..

Ensure the Jini JAR files are on your classpath when you execute.

I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.

I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.??

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Rule containing "Mark as Read" and "Move to Folder" does not remove New Mail Notification

I asked this question in another forum here (sorry for not linking, but the forum would not let me because my account is not yet verified):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rule-containing-mark-as-read-and-move-to-folder/061a8009-dd98-4304-81b0-6c4c8a5a6205
They passed the buck to this forum. Can anyone help? Here is my original post:
I have set up a rule so that emails from a certain sender should be marked as 'read' and routed to a certain folder. The rule works just fine except for the fact that it does not remove the new mail notification from the taskbar icon
or the system tray. The rule reads as follows:
Apply this rule after the message arrives
with New Home Sale in the subject
move it to the _New Home Sales folder
and mark it read
Once I open the _New Home Sales folder, all messages are marked as read, as they should be. When I open any of the emails in this folder, the notification goes away. It does not even have to be the most recent email or the same folder
- opening any email from any folder clears the notification, even if the same email was used to clear it before. Previewing does not remove the notification.
I have a similar rule set up for another folder:
Apply this rule after the message arrives
with New Home Final Sale in the subject
move it to the _New Home Final Sales folder
and mark it as read
The same thing happens here with the unread notification.
This is very annoying, as I want to receive these emails but I do not need to know every time one comes in.
Does anyone have any advice on this? I have read a few threads about an unread email bug, but I'm hoping I'm just missing a setting somewhere. I find it hard to believe such a bug would persist this long.

Hi,
From your description, I would like to verify the Exchange version and Outlook version at first. Since I have a test in my environment using Exchange 2010 with Outlook 2010. I create a same inbox rule, it works and there is no new mail notification from
the taskbar.
What's more, I recommend you use Outlook safe mode to determine whether the problem is caused by add-ins.
If the issue persists, please install the Outlook latest Service Packs and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Uninstaller utility does not remove the installation from the registry

In our environment, we publish a script in Group Policy so that both the ActiveX and Plugin installs for flash player are easily installed for staff that have limited user access on their computers. I usually remove or replace the old MSI files from the path the above script installs from when I get new versions of Flash Player. For a while, I've run into a problem where when the new MSI files are installed, they try to uninstall the existing installation and fail because the old MSI file is no longer at the original installation source path. I've tried to remedy this by having the script use the uninstall_flash_player utility to manually remove the activex and plugin first, but this utility does not remove the installation details of each from the registry, and the subsequent installations of the MSI files fail. I have to uninstall the existing flash player installations first or perform a registry hack to formally remove the installation from Windows, and then the new installation will succeed.
Does anybody have any advice for making this process work better? Would this be considered a bug with the uninstaller tool?

Hi, Until someone can reply to your thread/question, you may want to see this thread.
http://forums.adobe.com/thread/826773?tstart=0
eidnolb

Discovery does not remove deleted objects

Similar Messages

Maybe you are looking for