Discovery, some Procurve switches ok, some Other SNMP

Most of our HP Procurve switches go to Other SNMP -group after
discovery, though some models are shown under Switch. And Serial Number
is only discovered only for those that are under Switch.
What is the procedure to get some hardware added to ZAM recognition?
ZAM750
-sk

Sami Kapanen wrote:
> Most of our HP Procurve switches go to Other SNMP -group after
> discovery, though some models are shown under Switch. And Serial Number
> is only discovered only for those that are under Switch.
> What is the procedure to get some hardware added to ZAM recognition?
> ZAM750
> -sk
If it's a hardware model recognition issue (not a community string issue)
then you can download the ZAM SNMP Probe utility from the Novell
support/download site. It will gather all SNMP info it can so that a new
hardware fingerprint can be included in a PRU (once you email the results
file to Novell, as per the readme included in the download).

Similar Messages

  • SNMP operation fails 2900 procurve switches

    Hi
    I am running HP imc latest version. i did some SNMP access check for few HP procurve 2900 and 5400 switches. I get SNMP inconsistent results. I tested SNMP 5800 switches and it works fine. Same SNMP settings are configured on 2900s and 5400s as well. I logged into iMC server and ran SNMP test using paesler tool with set username  and supplied auth password. Test runs fine on both 2900, 5400 and 5800s and gives no errors. 
    Am i missing something? ...

    Hello,
    You will want to ask about this in the HP Enterprise Business Community and look in the Discussion Boards.
    It is for all things related to professional equipment and businesses, servers, etc etc.
    Here is the specific area to go to...
    Switching and Routing - HP Enterprise Business Community

  • Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

  • Some characters being replaced by other scripts

    I’m having a problem with Safari 2.0.4 on an Intel MacBook Pro. When it encounters some accented characters on some Web sites, it substitutes Hebrew letters and looks really strange. This does not occur on my PPC Mac Mini. How does one fix this problem? Thanks very much! Peace.

    And I didn’t replace any of the fonts that came with the computer. What now?
    It is sometimes easy to wind up with added fonts without realizing it. Two things we can try:
    a) Clean your font caches using FontFinagler, which you can get here:
    http://homepage.mac.com/mdouma46/fontfinagler/
    b) If problem is still there, check your fonts against this list and let me know if you have any others:
    http://docs.info.apple.com/article.html?artnum=301332
    Also let me know if you are using any font manager other than OS X's FontBook.
    Another thing you could try: If you type é into TextEdit and go through every font in the Font Panel (Format > Font > Show Fonts), when you switch to one of them the é should turn to Hebrew, and that would be the culprit.

  • I have an old dell computer that my itunes is currently on, can i some how switch my itunes to a different computer?

    i have an old dell computer that my itunes is currently on, can i some how switch my itunes to a different computer?
    im planning on getting rid of this computer and getting a macbook, i still want to keeo all my songs in my library, what could i do?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • Ios7 Update Problems on iPad 3 - My iPad is not going to black screen after not being touched.  Also, am I crazy; I can't find timing adjustment to go to black.  Finally, iPad slow to switch between some catgagories in control panel

    O.K.  I found 3 issues on my iPad 3 after ios update:
    1.  iPad does not go to black after non-use
    2.  iPad is slow to switch between some catagories in control panel
    3.  Speaking of control panel; have I lost my mind?  I can't find time adjustment responsible for iPad going to black.

    Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
    As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • HT5642 After turning off the notification switches of some apps in notificaton center, there are still notifications. I'm confused. Why?

    After turning off the notification switches of some apps in notificaton center, there are still notifications. I'm confused. Why?

    Just guessing, but I would think, as I look at mine, that it might have to do with when the apps were added to the device. To be honest, identifying this as a bug might not be correct. You are the first person I have seen post something like this, so it must not bother others. You can leave feedback for Apple on the feedback page. Go to http://www.apple.com/feedback and then click on the appropriate link.

  • Not able to fetch some network switches data in LMS 4.0

    Hi Experts,
     we have LMS 4.0 and we found one problem that some network switches data are not able to fetch with LMS.
    what could be the reason to happen this type of problem?
    please assist with best solution to resolve this issue..
    Suhas B.

    Hi,
    I am facing below problem
    Config Archival Status
    No. of Devices
    Successful
    48
    Failed
    1
    Partially Successful
    0
    Total
    1345
    Configuration Never Collected
    1338
    So I look up a device in the Device Center, here is its Reachability Status:
    SNMPv1 Read
    Success
    SNMPv2c Read
    Success
    SNMPv1 Write
    Failed
    SNMPv2c Write
    Failed

  • SNMP on ProCurve switches

    Hello,
    I have several ProCurve switches on my network. I assigned the "Generic Managed Switch, SNMPv2/3" driver to them and entered the SNMP community string (v2) them...
    Regarding SNMP access I get the following status: "Credentials status not yet known".
    Regarding the device driver I get the following status: "Status of this driver is currently unknown".
    I entered both information several hours ago...
    Are there any known issues with ProCurve switches? Is there anything I need to think of?
    Thank you in advance!
    Regards,
    Mitja

    Hi Mitja, these are forums for the Cisco products.
    You may want to try the HP forums
    http://h30499.www3.hp.com/t5/Networking/ct-p/hp-networking
    -Tom
    Please mark answered for helpful posts

  • HT204266 I have some updates due on some Apps I have downloaded but when I try to update I get a message saying that my account is not in the UK store so must switch to Ireland before purchasing. Does anybody know how you change stores?

    I have some updates due on some Apps I have downloaded but when I try to update I get a message saying that my account is not in the UK store so must switch to Ireland before purchasing. Does anybody know how you change stores? I did not do this deliberately!

    Yup! Here:
    http://support.apple.com/kb/HT1311

  • Problems with SNMP on procurve switches

    Having problems with our Procurve Switches being scanned in Spiceworks.One note I read said I had to enable SSH on each one. I did that the crypto key is there and still a no go. Another note said that I needed SNMP enabled for Spiceworks to read them. So on one switch I ran the commands I got from a HP site for enabling SNMPFrom the config setting in the switchsnmpv3 enableI created the MD5 authentication passwordI created the privacy passwordI created a user that uses SHA and created the passwordI entered the command snmp-server community "public"I entered the command snmp host (IP of Spiceworks) "public" allNow when I type in show snmp-server I see the IP address of Spiceworks and that SNMP is enabled. But when I try to have spiceworks access it. I keep getting Authentication error (Bad password, community or key). I'm not sure what...
    This topic first appeared in the Spiceworks Community

    Hi Mitja, these are forums for the Cisco products.
    You may want to try the HP forums
    http://h30499.www3.hp.com/t5/Networking/ct-p/hp-networking
    -Tom
    Please mark answered for helpful posts

  • Adobe Premiere Pro CC launches for some users, but crashes for others.

    I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
    For these students, the following error appears:
    Adobe Premiere Pro CC has stopped working
    Check Online for a solution and close the program (Tried this nothing seems to come of it)
    Close the program
    I clicked View problem details
    Problem Event Name: APPCRASH
    Application Name: Adobe Premiere Pro.exe
    Application Version: 7.2.2.33
    Application Timestamp: 532c3999
    Fault Module Name: dvaui.dll
    Fault Module Version: 7.2.2.33
    Fault Module Timestamp: 532bed86
    Exception Code: c0000005
    Exception Offset: 00000000002d31c1
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 3272
    Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
    Additional Information 3: 3e22
      Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
    I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
    -Barb

    I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
    About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
    I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
    BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

  • SharePoint 2013 Error Exception from HRESULT: 0x80131904 Some sites are working while others give this error

    I can access some of the sites,  but others are throwing this error code... not sure why it appears that it is every other site almost...
    I can actually get this error, at a top level site, go to a sub-site and that site is displayed.
    Any ideas on how to resolve this error..
    the Central Admin site is down also, just a blank page is returned. no error message...
     we were able to add extra space on the VM brought back the sites but now the Central Admin site throws  a 404 not found...

    Hi ,
    According to your description, my understanding is that after adding extra space on the SQL server VM, the error 0x80131904 disappeared, but the CA got 404 error. Is it right?
    Afer adding extra space on SQL server, make sure the SQL server is online and run SharePoint 2013 Products Configuration Wizards, when running, select “don’t disconnect from the server farm”.
    Check whether this issue occurred on other machines. If CA is working from other computer and only server is facing this issue then you need to create diableloopbackcheck registry at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa. The value should
    be 1 .
    Please go to IIS->the server->ISAPI and CGI Restrictions, check whether there are four 'Microsoft SharePoint Foundation 2010' entries. If not, you need to create the following entries with the name as 'Microsoft SharePoint Foundation 2010':
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\_vti_aut\author.dll
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\_vti_adm\admin.dll
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\shtml.dll
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\owssvr.dll
    Check Allow extension path of execute to allow the restriction to run automatically.
    If this issue still exists, please check the log file to find more information about this issue. The path of the log file is : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Or you can use Event Viewer(Start->Run->event viewer) to find the log.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Why are some of my calendar appointments synching, some synch multiple times and others not at all?

    why are some of my calendar appointments synching, some synch multiple times and others not at all?

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

Maybe you are looking for

  • Double everything and no iTunes Store connection!

    Hi!  I had a problem with iTunes not connecting to the internet.  Googled the problem and was promted to check my firewall - iTunes is ticked under exceptions so that's not it.  Uninstalled and reinstalled iTunes following the instructions on Apple h

  • Ipod nano 7th gen stuck on apple logo screen

    New iPod nano 7th gen.  At first attempt to upload songs, was prompted to update software.  So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think t

  • Adobe Reader 9.0  How to rotate documents?

    In 7.x I had a button to quickly flip a document upside-down. This functionality seems to be missing in 9.0 (both in browser plugin & in standalone reader) Or am I just missing something? If someone would be so kind as to reply with CC to me at cyber

  • Build process for ejb iiop example

    Hello and thank you in advance, I'm trying to build the examples under iiop examples for WL6.1 (Win NT), and the 'ant' build xml file contains a tag line <createidl ... which causes the build to fail. I've been unable to find anything on this tag. Am

  • Help!!  mail quit everytime i opened it...???

    I don't know what's going on... Today I opened Mail... got some email from friends, and now every time when I open Mail, I just need to do one thing, right click somewhere... or try to delete a message... just try to do one function, then immediately