Discreet Job closed with Assembly Pull component not issued

I am pulling my hair with this problem recently.
I have a lot of jobs that were able to complete and be closed while there are assembly pull components not being issued/partly issued.
I don't know how did the job complete with assembly pull components outstanding in the first place. Could anyone help me with the reason?
Jobs are all closed by accountant now so I assume it cannot be reversed, but I would like to know how so I can prevent it from happening in the future.
My suspicion is maybe someone changed component type to something like "bulk", complete the job and change it back. But I don't have prove. the Help-Record history shows the system admin was the last updator.

Hi,
I think these Wip jobs are may be completed due to " Negative Balance allowed " in inventory setup is checked.So even if you dont have on hand quantity , oracle will complete the job.
Also Oracle will never allow to change the supply type in WIP Job. To change the supply type you have to change it at Routing or BOM Level.
Thanks,
Kaustubha

Similar Messages

Operation pull material not issued to wip job

Hi,
Issue is happening intermittently and not sure of root cause.
Operation pull components are not issued to wip job when move transactions are performed.
supply subinventory and locator as in wip job are having sufficient onhand available.
Can some one please let me know probable causes / setups which I need to verify if some one has faced this kind of issue already.
Thanks
Vasudha.

868134 wrote:
Hi,
Issue is happening intermittently and not sure of root cause.
Operation pull components are not issued to wip job when move transactions are performed.
supply subinventory and locator as in wip job are having sufficient onhand available.
Can some one please let me know probable causes / setups which I need to verify if some one has faced this kind of issue already.
Thanks
Vasudha.For intermittent issues..i suggest you to log a oracle SR...so that they will enable debug and frd logs..as they are really hard to track and replicate
HTH
Mahendra

Job failed with error tempdb is not available

HI All,
Backup job failed with error 'Unable to determine if the owner () of job backup_all_user_db_full has server access (reason: The log for database 'tempdb' is not available. [SQLSTATE HY000] (Error 9001)).'
I checked in errorlog
LogWriter: Operating system error 1784(The supplied user buffer is not valid for the requested operation.) encountered.
    Write error during log flush. Shutting down server
2014-09-09 07:46:25.90 spid52    Error: 9001, Severity: 21, State: 1
2014-09-09 07:46:25.90 spid52    The log for database 'tempdb' is not available..
2014-09-09 07:46:25.92 spid51    Error: 9001, Severity: 21, State: 1
Can anyone suggest to why it is happening

From the error message, it looks like the drive on which the tempdb log file is residing is having issues.
Please involve your storage admin to look into the disk subsystem

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

Create report with Assembly BOM component

Hi,
I have a customer who uses Assembly BOM in his delivery and invoice.
In this assembly BOM are some component that they want to see in an report. But in the deliverie you don't see the component items in the line
Is there somebody who can tell me where i can found these items when delivery is made in an SAP table?
Or is there allready an query which give me an overview
I found out somethings myself.
SELECT DocNum, T0.CardCode,T0.CardName, T1.ItemCode,T2.ItemName, T1.Quantity FROM ODLN T0
Inner Join DLN14 T1 on T1.DocEntry = T0.DocEntry
Inner Join OITM T2 on T1.ItemCode = T2.ItemCode
Where DocNum = 11030539
Problem now is that the result gives me all components of the assembly bom, but in this specific assembly bom is an salesitem (costs for assemblying) but that lines gives me 'zero' as quantity??
Thanks
Mark
Edited by: M. Hageman on Jul 27, 2011 12:05 PM
Edited by: M. Hageman on Jul 27, 2011 12:16 PM

Hi,
As the sales item is a non-inventory item, the quantity value taken from the DLN14 would not give you that value.
I tried to create a query which actually links the table of the BOM and the BOM rows. Please check the following :
SELECT DocNum, T1.CardCode,T1.CardName, T3.ItemCode,T4.ItemName, t6.quantity from ODLN T1
INNER JOIN DLN1 T2 ON T1.DocEntry = T2.DocEntry
INNER JOIN DLN14 T3 ON T1.DocEntry = T3.DocEntry
Inner Join OITM T4 on T3.ItemCode = T4.ItemCode
inner join OITT t5 on t5.code = t2.itemcode
inner join ITT1 t6 on t6.father = t5.code
where t5.treetype = 'A' and docnum = '11030539'
I was not able to test it. Please check and update the thread or may be you can further customize and see if the same works.
Kind Regards,
Jitin
SAP Business One Forum Team

CO-PA Cost Component do not match with Standard Cost Component Values

Dear Members,
The CO-PA Cost Components (as mapped through KE4R), do not match with Standard Cost Component values for the Group Currency. In local currency the values match.
System is correctly picking up VPRS value, both in local currency and Group Currency, which is equal to the total of Standard Cost Components however, it is the Value Fields linked to the Standard Cost Components in Group Currency that do not match.
In KE40, the Indicator is 4:Released Standard Cost Estimate matching Goods issue Date.
I have verified KEPH/CKMLPKEPH tables. The values are same as that of VPRS.
Any help/clues?
Regards
Satya

Hi,
In case of billing documents the group valuation approach is managed in the data structures of the legal valuation in additional value fields. To control costs and revenues in the different views separately, you must create additional value fields and assign them to the data structures.
The field contents must be filled via the CO-PA user exit, they cannot be entered by assigning conditions to value fields. The profit center valuation is updated in a separate ledger. No separate value fields are necessary.
The exit to be used is function module 'EXIT_SAPLKEII_002' ( enhancement COPA0005 ). Within the exit you have the complete SD data avaialble in the tables 'T_ACCIT' and 'T_ACCCR'. The conditions can be found in T_ACCIT and the corresponding values ( linked via 'POSNR' ) in table T_ACCCR. The PA line item and the corresponding SD item in table ACCIT
can be mapped via the line item field 'RPOSN' and the field 'POSNR_SD' in table ACCIT.
regards
Waman

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

The located assembly's manifest definition with name 'openfoundation' does not match the assembly re

Ok. been working on this for the better part of a day. I am having trouble with the .net web controls. trying to create a simple portlet that populates a text box with values from a 2nd text box when a button is selected. both text boxes are in the same portlet.
without using the <httpModules> entry in the web.config file the portlet works fine, but it does pop you out of the portal.
setup: working in a Dev. environment with portal and portlets on the same box.Portal version is 5.0.2.EDK version is 5.0.2.
error:
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///c:/inetpub/wwwroot/netTest
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///c:/inetpub/wwwroot/netTest/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
   Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
   Com.Plumtree.Remote.Transformer.Condition.GatewayedStandardCondition.UseFilter(HttpContext ctx)
   Com.Plumtree.Remote.Transformer.FilterManager.UpdateFilter(HttpContext ctx)
   Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e)
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.947
************************************************************Is there any step by step instructions for setting up and using the .net web controls in Plumtree????
There doesn't seem to be any information in one spot as to setting up the environment to use the .Net Web Controls. I have had to piece together information from multipule threads to get this far. I.E. there was nothing in any documentation that I have read that required the installation of the VJ# lib's. (that error took me the first half of the day to resolve :-) )
Thanks for any help,
Greg************************************************************

Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this?

All crawl jobs are failing with errors, Query server not responding.

Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
Pavan

Hi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

What is wrong with Firefox ---It will not pull up anything the way it used to --having to use exployer instead ---Help

What is wrong with Firefox ---It will not pull up anything the way it used to --having to use exployer instead ---Help
The catalog of our University will not pull up properly on Firefox but will on internet exployer Why?

The #rdn# is a url variable that is pass to this form from
another page. I put it in a hidden filed and originallly used it as
from.rdn. That did not make a difference, so I just used rdn.
The cfoutput to display the rdn, partnumberid,
deliverynumber, totalrows, and row, all display properly. I even
use those in the query anlayzer and the update works.
I will remove the crparam and see if that makes any
difference. This is very frustrating since there are no error
messages and I am led to believe the code works.

Pretzel: The located assembly's manifest definition with name 'openfoundation' does not match the

We have got 5.0.2 Plumtree portal, EDK 5.0.2 and .Net Web Controls 2.1.
I am trying to call:
IPortletContext oPortletContext = PortletContextFactory.CreatePortletContext(System.Web.HttpContext.Current.Request, System.Web.HttpContext.Current.Response);
I have attached the error I am getting. Is this related to Open Foundation version? This is quite urgent because we are in the process of trying to get a demo together for grabbing Activity Rights.
Server Error in '/portlets/DOJ/JNET/pretzel.clients.doj.reentry' Application.
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
   Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
   pretzel.clients.doj.reentry.navigation.Page_Load(Object sender, EventArgs e) in \\devnet2\inetpub\doj\reentry\development\pretzel.clients.doj.reentry\navigation.aspx.cs:22
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.1031; ASP.NET Version:1.1.4322.947

I have seen this before after a upgrade of the EDK, found I had to remove the reference in the C# project to the old EDK dll and re add it to the new EDK dll.
Also noticed that you are using the System.Web.HttpContext.Current fully qualified namespace in the CreatePortletContext() call instead of the usual way of PortletContextFactory.CreatePortletContext(Request, Response) this uses the System.Web.HttpRequest.Page namespace by default.

ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.

When I generate a pdf Reporte using <af:fileDownloadActionListene> and Ireport this erros fires when i click active tab.
I'm Using Studio Edition Version 11.1.2.3.0:
pt1 is a <af:pageTemplate>
cil2 us <af:commandImageLink disabled="#{!bindings.CreateInsertEnc.enabled}" id="cil2"
<af:commandImageLink id="cil11"
binding="#{backingBeanScope.BakingDocument.cil11}"
icon="/Pictures/printer.png"
shortDesc="Print">
<af:fileDownloadActionListener method="#{backingBeanScope.BakingCotizar.PrintDoc}"/>
</af:commandImageLink>
Error Log:
java.lang.IllegalStateException: ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.
     at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.unregisterComponent(PageDataUpdateManager.java:600)
     at oracle.adfinternal.view.faces.context.RichPhaseListener.handleStartAndStopActiveData(RichPhaseListener.java:478)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:487)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Don't work, all iterator have ChaangeEventPolicy: default none.
And adfc-config.xml has ChaangeEventPolicy unchequed.
Another suggestion please. I need a solution so fast.

Have a new iPad with ios6. Will not send emails. Addresses are valid but get notice each time that recipient was rejected by the server. No help on web site, and Apple's only manual is for previous os version. We miss Steve Jobs.

Have a new IPad with IOS6. Will not send emails. Addresses are valid but get notice each time that "recipient was rejected by the server." Apple has apparently neglected to put out a manual with IOS6 and the previous manual has no indication of what to do. Really miss Steve Jobs.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Having problems with my iPhone4 not closing with the center button to go another app any suggetions

We wife continues to have trouble with the home key not working. I have tried everything I. Know of. And it works for a while an then goes back to messing up.

THANK YOU SO MUCH stussaar!
My Mother did what you said for the Spam and my number was in there about 100 times. She deleted all them. Deleted me as a contact and then rebooted, then she text me and I text her back and I went right into the Spam again. I told her to tell TMobile this so then can maybe help and remove my number from Spam on their end.\
Thanks you so much! you got us 99.999 % the way there!!
I appreciate your help!!!! I hope this worked also for your problem!!
Thanks again!!!
Mike

Discreet Job closed with Assembly Pull component not issued

Similar Messages

Maybe you are looking for