Discrepancy between F.19 and F.05 on GR/IR accounts

Hi,
In my opinion, the documents reported as GNB (goods received not invoiced) in transaction F.19 should be exactly the same documents that are being revalued in F.05 using Open Items, GR/IR account, radio button on "Valuate GR/IR" accounts.
By definition, GNB are a liability that needs to be remeasured to current rates.
I am now observing that most F.05 includes documents that F.19 does not consider GNB (a spot check on some of these documents confirmed that F.19 is correct anf F.05 should not revalue these documents).
Has anyone come accross this discrepancy, and have a solution? We are currently not able to correctly state the liability resulting from the goods received without invoice.
Thanks for your help, and best regards,
Pascal

Thanks for the reply.
I have double checked again if I used the same key date, but that was not the problem.
We also have no manual postings (we have had this problem in the past and ran into significant problems with that).
The download of the results from both F.19 and F.05 was done, and I can identify exactly which documents are revalued in F.05 and are NOT considered GNBs in F.19, but I can't tell the reason.
When I find one such document, and I look up all the documents that have the same PO number (and line item number), I can tell that F.19 is correct; The sum of all documents is a debit (therefore BNG and should not be revalued), but in this particular case, the goods receipts are being revalued, even though the invoice receipts exceed the value of the goods receipt).
From looking at these documents, I can't figure out what makes them different from all the other transactions that are correctly revalued.
Any pointers on what I should be looking for in these documents are very welcome.
Thanks, and best regards,
Pascal

Similar Messages

  • Discrepancy between the confirmation and deletion of qRFC-LUWs

    Hi experts,
    When I started PC to loading data from CRM system,data loading stopped.I check the
    Log.
    "discrepancy between the confirmation and deletion of qRFC-LUWs" (Message no. RSQU016)
    How to solve it? Thank you.

    Hi Gavin,
    <b>Please use Transaction code, SMQ1.</b>
    Drill in to the queue and delete the respective queue.
    Or use transaction <b>LBWQ</b>
    to get to the same information. Select your queue and delete it.
    Regards,
    Aby

  • Discrepancy between IM stock and WM Stock

    Hi experts,
    We found there is discrepancy between IM stock and WM Stock.Before configuring WM storage types , IM Stocks are not syched. So WM stocks are showing less then IM stocks,. Now i need to synch up the IM stock and WM stock. what we needs to do. Can you please guide us.
    Thanks & Regards,
    Vamsi

    OR
    have a look at using transaction LX23 (provided you dont use HUM this should help you determine/ analyse and post any differences between IM and WM).
    thanks,
    A
    LX23: Stock Comparison Inventory Management / Warehouse Management
    Description
    Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
    On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
    In addition to specifying the area, you can also determine the extent of information to be issued.  Here you have three options:
    1. "With bin inventory"
    In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
    2. "All data on material"
    Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
    3. "Clear differences"
    If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system.  Negative WM stock figures and stock differences in returns will not be cleared.
    If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
    CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
    Prerequisites
    The comparison is also possible for warehosue numbers managed on a decentralized basis.
    Output
    You receive a list with various materials. The list contains the following information, for example:
    The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
    The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
    If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.
    Edited by: WILSAQ on Aug 11, 2009 12:09 AM

  • How can i troubleshoot a "software conflict between a device and something in my original user account"

    hi
    my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".)
    in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble which suggests there may be a "software conflict between the device and something in your original user account."
    i changed to another account on my iMac and my camera connected immediately.
    is anybody able to explain how i go about fixing this "software conflict".
    many thanks
    Carlo

    With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
    The Outbox.mbox represents "Out" in the mailboxes drawer and is shared by all accounts.
    Delete the Outbox.mbox and empty the Trash.
    Launch Mail and a new Outbox.mbox will be created automatically by Mail within the Mailboxes folder and this should resolve the problem.

  • Discrepancy between Pacman FTP and Arch website ? [solved]

    Hi,
    I just wanted to report out what I think is a discepancy between the pacman FTP base and the Archlinux website.
    I installed kde yesterday pacman -S kde and replied yes to the question asking me if I wanted to install all kde group components.
    I ended up with gwenview which belongs to the multimedia category on Archlinux website, while kiosktool and kshutdown, which are in the kde category on the website were not installed.
    Unless I am confusing the group and category concepts, it appears to be a discrepancy. Wouldn't it be clearer if those concepts matched and bore the same name ?
    Let me know. Thanks.

    As you thought, you are confusing group and category.  A group is a bunch of similar apps that can be installed at once.
    For example, you can list all groups available by doing:
    pacman -Sg
    However, categories aren't the same.  If you try pacman -S multimedia for example, it won't work.

  • Discrepancy between Balance sheet and Aging report

    HI Experts,
    I have a client who run the AR Aging and Balance sheet monthly for as their month end procedures.
    They have found the following:
    When the Balance Sheet and Aging report is run on the same day this shows the same on the Accounts Receivable and the Aging report.
    When the Aging is run a few days after the month end, and the Aging Date is selected as 05/01/2010, the Posting Date untill is also 05/01/2010, the Balance Sheet To date is 05/01/2010 I get discrepancies between the 2 amounts.
    I looked for documents with later Posting/Document dates but could not find any in the aging report.
    Any help would be welcome.
    Marli

    Hi Marli,
    You may check these threads:
    Re: Mismatch in  Accounts Receivable Balance and A/R Aging Balance due
    Re: customer aging query - show balance as of a specific date
    Thanks,
    Gordon

  • Discrepancy between HD monitor and output video

    Howdy community,
    I have a weird problem with Final Cut Pro 7. I have an Asus VW266H HD monitor, set at a good viewing angle on my desk. When I was editing some footage, it looked WAY too dark, so I used a color correction filter and brought the blacks up to 95. The resulting image in the FCP viewer window is the one you see on the left in my screen shot. I hope you can imagine just how dark the original footage was. I was reasonably satisfied with how the footage looked, especially since it wasn't looking "milky" like it can if you lighten/whiten too much in post.
    So then I exported the footage, and got the image on the right (in my screen shot). These two images are from the same second of video, on the same monitor. NO changes were made between the exported version in QT on the right and the FCP viewer image on the left.
    Why does my monitor and/or the final cut viewer window show me an image that does not represent my output? If the image in final cut and the exported version in quick time look so different, how can I trust my eye in final cut?
    Obviously, this is a huge problem.
    Please help!!!

    If that is the case, how does the editor control how the image looks to others?
    You can't. This general problem has been around since the advent of moving pictures. Wander over to the video wall at any big box store and look at the displays. There won't be two that appear alike. All you can do is control the image you send out.
    If you are seriously interested in image integrity, get yourself a output device from AJA, BlackMagic, Matrox, etc that can send a qualified signal and a calibrated broadcast TV monitor to to view that signal. Then you'll know what it really looks like.
    To paraphrase the old Yiddish saying, "A man with two clocks can never be sure of the time, but, man with an atomic clock, will know."
    Good luck.
    x

  • Data discrepancy between Webi Report and same Query fired on SQL Server 2k5

    Hi ,
    We are facing an issue in BO XI R2.
    We need to run a Webi report in which negative values for forecasting data for year 2011 and 2012 should be displayed.
    When we are running this report for negative values, we are getting message u2018There is no data corresponding to this queryu2019.
    Then we tried executing the same query on Database. Here at db level we got the correct required result.
    So now we are not able to find the reason for data discrepancy .
    Why the same query generated by Webi is providing correct data when fired on reporting database and not when running the Webi Report.
    Checklist we have gone through for this troubleshooting is-
    -Connections of Universe (Is universe pointing to same database or not)
    -Any filter condition present at universe level and at report level.
    Could anyone please help on this.
    Regards,
    Vaibhav

    Vaibhav,
    Have you tried the following when you are in WebI: go under the Edit Query panel, click on the "SQL" icon, and review the query that is getting generated?  At this point you can also click on the "copy" option, then paste this query into your SQL application analyzer and run to see what results are generated.  To me, it sounds like the portion trying to generate the "minus" sign might be getting tripped up causing the disconnect....
    Thanks,
    John

  • Color Discrepency between Develop image and Print Preview

    Is there any way to alter the color image in the Develop module so that it matches the color of the image in the print preview screen? The colors in the final printed image match those of the ones displayed in the print preview screen and are nothing like the colors I am adjusting in the Develop module. Thanks for the input.

    The web preview on windows machines should not match anything indeed. Internet explorer is not color managed at all (shame on you MS). If the web preview matches your print, but the develop screen doesn't it means that you have miscalibrated your screen. Your screen is probably very close to sRGB as many are and you could probably get away with just using sRGB as the screen profile (not recommended for real color management BTW). Anyways, we have seen gobs and gobs of windows color management issues come by here that turned out to be corrupt monitor profiles. As a test, try clearing the profile that you have selected in the monitor's properties dialog (and thereby selecting the default sRGB) and restarting LR. If you still see a difference between the different modules, the monitor profile was corrupt and you should recalibrate.

  • Discrepancy between iTunes library and synced iPod song list

    I am sure there must be a really simple answer to this, but heck if I know.
    My iTunes library on my PC has 1614 songs, yet despite my iPod being sync'd, my song list shows only 1588 songs.
    So, 25 tracks have not loaded - why is this? Surely there should be exactly the same number of tracks in my song list?
    H E L P - its driving me mad.

    I have a 24 track difference between my itunes library and my song list in my synced ipod. Really bugging me as I don't know why - have ensured all songs are checked, but still no answer. Where are the missing 24 songs?
    Surely someone out there must know the answer - HELP!

  • Huge discrepancy between design mode and exported html.

    I added some html from videojs.com to my adobe muse website. As long as I put this video to the left of the website there is no problem, but when I put it more to the right the footer moves along with it. This ONLY happens when I export the page, this does not happen in DESIGN mode in muse itself. Can anybody please help me with this problem?

    Hi Parikshit,
    The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
    As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
    Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
    Does that clarify?
    Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
    Thank you so much for responding!
    - Carly

  • Discrepancy between Select Expert and SQL Query

    Greetings.  I am having an issue with a report, but I think it's more cosmetic and may not be causing a functional issue...
    When I go into the Report...Select Expert...Record, I see that my criteria for the report is .AND. logic.
    When I go into the SQL Query view, it shows .OR. logic...
    After I verify the database, the SQL query still does not get updated.  Saving and re-opening the report still does not update. 
    Is there any reason this will never match?  Thanks in advance.

    Sorry.  I am on Crystal 12.  Database is SQL 2005.
    I didn't think the detail mattered much, but the select expert shows:
    isnull({NONCONFORMANCE.CLOSED_DATE}) and
    not isnull({NONCONFORMANCE.PRODUCT_ID}) and
    not({NONCONFORMANCE.PRODUCT_ID}= '') and
    not({NONCONFORMANCE.PRODUCT_ID}= ' ')
    SELECT N.NCM_ID, N.NCM_DATE, N.PRODUCT_ID, N.CLOSED_DATE, N.ENTITY_ID
    FROM   NONCONFORMANCE N
    WHERE  N.CLOSED_DATE IS  NULL  AND N.PRODUCT_ID IS  NOT  NULL  AND  NOT (N.PRODUCT_ID='' OR N.PRODUCT_ID=' ') AND N.ENTITY_ID='CHI'
    Now that I look at how the SQL is generated (after cleaning up the statement), it's the negatives that got me.  I originally had a problem with the report that was pulling back blanks and spaces.  I made changes and I didn't pay close enough attention to what exactly changed in the SQL...  It appears to be the way the logic in the Select Expert is converted to SQL.
    I just need to start using Command more often and write my own SQL instead of using the Select Expert!!!

  • Discrepancy between Aging Report and JE

    The invoice is at USD 22,871.20 and in local currency KES 1,975,745.98. 
      The figure showing in the BP aging in local currency is KES 1,979,120.41 yet if I check through the JE, TB and GL the figure is different. 
      An invoice has been raised in BP currency (USD). The invoice is at USD 22,871.20 and in local currency KES 1,975,745.98.
    Any reason to why this could be so???
    See attached.

    Hi,
    Because your BP currency is USD, you may only get aging based on USD. If you want to know LC aging, it is calculated result by the system exchange rate for info only.
    Thanks,
    Gordon

  • IPhoto 11 Places discrepancy between Library -- Places and Events or Photo

    iPhoto 11 crashed and automatically rebuilt itself. Now some photos associated with some Places no longer appear under the Library --> Places map. However, if I go to the specific event or photo, the pin placement on the map is correct. This is for some photos, not all.
    Please advise. Thx

    I would restore the backup from jsut before the crash
    LN

  • Hour discrepancy between Outlook calendar and icloud calendar

    My Outlook calendar, iphone, ipad and icloud are set to the same time zone and time zone support is ON. But when I create an appointment on outlook it appears +1 hour in my apple devices. When I creat an appointment in my apple devices it appears -1 hour in my outlook. Does anyone knows how to fix this?

    Nothing. I just stopped using that mail account so I didn't had the need for solving this. But I got no help, sorry.

Maybe you are looking for

  • HT4889 How can I use all files from every user on my mac?

    Is there a way I can share all of the files on my computer to where every user on one computer can access files from one user to another? All help is appreicated!

  • Why don't pdf email attachments not open in pdf reader?

    I have a series 1 iPad running the latest ios available for that model. I have an email with some PDF attachments that I want to open and store in PDF reader however the only options presented are to read the attachments using iBooks or Kindle. Why i

  • Disappearing Swatch Library

    I frequently use Pantone solid coated colors in my work, and have to open that palette anew each time Illustrator has been restarted.  I know that in CS4 I could keep that palette available, but I haven't been successful doing the same in CS5.  I hav

  • ABAP porgram in update rule-Job stats

    Hi All, I have an ABAP program that is in one of the update rules from source ODS to destination ODS. Source ODS has 20million records. When we are loading the records to destination ODS , Is there any way I can find howmuch time will take to process

  • IOS 7 App Store Updates/Badge Issue

    My app store has a notification badge that says I have updates, but when I open the app store and click "updates," it quickly shows me the apps, and then, one second later, the screen says that all of my apps are up to date. Is anyone else having thi