DIscrepancy between Flash Playback Speed and SWF

I'm experiencing a fairly signifigant DIscrepancy between rate of apparant motion in the flash files Im working on, and "speed" of the "finished" SWFs.
Put another way, what appears to be a reasonable speed for a tween in Flash, is a tad too fast when I view the work as a swf preview.
I would rather find a solid method of working with the images Im creating to determine the proper lengths ..and speed of these tweens prior to publishing a preview and then needing to go back and hand alter the length of the tweens I've created.
A "real time" environment would greatly increase the immediacy of creating such " files"
What can you suggest to synchronize these "playback speeds"?
Thank you.

How are you creating these tweens? If you are using coded tweens, what are you using for code?

Similar Messages

Record playback is very slow between Flash Media Server and Flash

hi all
I have done server side recording successfully with red5 flash media server and can see
that the flv record is being created properly.
Then if I try to playback the record like
NetStream.play("record.flv"), I see that stream playing is very very
slow, for both of audio and video.
And then if I try to playback the recorded file via using the
filesystem path of it, everthing seems fine.
Problem occurs when I try to sucscribe and play the stream of the record.
PS : There is no problem with playing the published stream
(NetStream.play("streamName"))
Does anyone have an idea about this issue?
If you need any additional information, please let me know.
Thanks in advance
Regards

In a nutshell flowplayer delivers the video through your web
browser. It does this via http protocol (port 80) and progressive
download on any web server
Progressive download finds the video on the server and plays
it back through the player as it is being downloaded. 2 important
things to take from this are 1, the video is being downloaded to
the clients hard drive, at the end of the playback they will have a
copy of your video that they can do whatever they like to and
repost it somewhere else. 2, It plays back as it downloads, meaning
if I'm viewing a 10 minute video from your site and want to skip
ahead to the middle or end I have to wait for the whole video to
download before viewing those segments. Your web host by the way
will love you for progressive download because it will appear as
though your transfer rate has gone through the roof. Once the
request for the video is made there is no turning back, the client
gets the whole thing whether they watch it or not.
Flash media server uses the rtmp protocol. This protocol is
an open socket protocol through port 1935. This is a two way street
essentially. When the user views a video using FMS they basically
get only enough of the video to keep the connection open and
satisfy the required buffer to assure clean playback. The bytes of
info that carry the video only go to the users memory, not the hard
drive. This allows the user to jump back and forth around in the
movie without having to wait for the whole thing to download.
Hope that helps.

I have a discrepancy between my LR Cat and my HDD contents

I have a discrepancy between my LR Cat (54,000+ images) and my HDD content (60,000+ images).
Sync'ed, searched for missing photos and I still have no idea about the discrepancy.
OS X 10.9.4 and LR 5.

Thanks Geoff. do you have '"Do not import suspected duplicates" checked in the Import Menu????' - Yes, I do.

Double-byte Chinese characters between Flash Media Server and WebLogic 9.2

i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and receive message. but the returned message from the Weblogic server is as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>x8054x901Ax6027x6D4Bx8BD5</test>
</reports>
</response>
</root>
the returned messages between the <test> and </test> tag can be decoded to "测试联通性" in Chinese via utf-8. why not the returned messages just show the result as :
<test>测试联通性</test>
Later i made another test: copy the war file in weblogic server to a apache-tomcat server, then the FMS send XML message to apache-tomcat and got the correct message as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>测试联通性</test>
</reports>
</response>
</root>
then what is the problem with my weblogic? what shall i do to solve the problem? thank you for anyone who gives me some advice.

i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and receive message. but the returned message from the Weblogic server is as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>x8054x901Ax6027x6D4Bx8BD5</test>
</reports>
</response>
</root>
the returned messages between the <test> and </test> tag can be decoded to "测试联通性" in Chinese via utf-8. why not the returned messages just show the result as :
<test>测试联通性</test>
Later i made another test: copy the war file in weblogic server to a apache-tomcat server, then the FMS send XML message to apache-tomcat and got the correct message as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>测试联通性</test>
</reports>
</response>
</root>
then what is the problem with my weblogic? what shall i do to solve the problem? thank you for anyone who gives me some advice.

Problems copying between Flash CS5.5 and TextEdit in OSX Lion

This is a wierd one but it's cost me a ton of time...
When running Flash CS5.5 on OSX Lion (vs. 10.7.4) if I copy text from Flash and then paste it into a TextEdit Document it ALWAYS results in slowing down Flash to the point where it is basically unusable. The ONLY solution is to restart the whole system. (I use TextEdit to document my work, so I go back and forth between the two constantly).
Specifically, the copied text must be from a Instance Name field or a Movie Clip name field. (I've copied text out of a classic text field without problem).
When I go to paste the text into a TextEdit document there is a abnormal lag of a few seconds, but the text does get pasted, and TextEdit continues to function normally.
However, when I then return to Flash, it is noticable slower. Every click takes several seconds to register. For example, when opening a movie clip in the library, after double clicking the MC after a few seconds the MC will be highlighted, after several more seconds the timeline will display for that MC, afer several more seconds the stage will finally display the cotents of the MC. The larger the file, the longer the delays.
Restarting Flash makes no difference. Trashing Prefs makes no difference. However restarting the entire system does fix the problem.
I also reinstalled Flash, which also fixed the problem, but I was able to cause the problem to occur again.
I may pass this along to Apple also.
Thanks for any insights!

Thanks! (Didn't understand what you meant before).
Activity Monitor showed that pasting the text in TextEdit caused fontd to jump up to near 100% whenever I tried to interact with Flash. fontworker and helpd also hit near 100% for a few moments, but it was mostly fontd. Killing fontd in Activity Monitor seemed to return everything to normal (but I'm not sure what else is affected by doing that). I am also, then, unable to make the bug occur again.
So it appears to be the os. Strange that this only seems to affect Flash, though.
Thanks again (Learned something!)

About the rules (logic) between the fan speed and the temperatures?

Hello All,
Well, I've had a bad experience with my MBP last week: my motherboard busted and had to replace it... Expensive part to replace!
After thinking about the reasons why it failed, my attention has been directed toward a possible motherboard overheating, which might have damaged the motherboard.
I've installed the iStat Pro widget and regularly monitor temperatures displayed vs. fan speed. I do get a bit nervous when I see a 84 oC CPU temperature and idle (2000 rpm) fan speeds. My GPU temperature is also sometimes in that range.
My questions are:
1) does anybody know the rules (logic) between the various temperatures (CPU, CPU heatsink, GPU, GPU heatsink, enclosure, HD, etc.) and the fan speeds?
2) other than with the fews apps out there, is there a way to customize the rules? Is there a text file or a plist file somewhere where I can change the rules?
Thanks!

If your idle speeds are 2000 rpm, you have one of the original Core Duo MBPs. For me, I see fans on my 17" CD MBP speeding up once temps get into the upper 70s °C.
Apps like smcFanControl allow you to alter the setpoints. Note that some users who installed smcFanControl, then uninstalled it, report symptoms like yours - namely, the fans remain at idle no matter how hight the temps get, until a thermal shutdown is triggered (somewhere close to 100 °C).

I have a perplexing issue regarding a huge discrepancy between perceived storage usage and what shows up in system profiler?

I am currently thinking about what my next laptop is going to be after my MacBook Pro from about 2009 finally gives out (still going strong!), and I am in between the 128GB and the 256GB MacBook Air models so I wanted to get an idea of how much space I was using right now. When I use the system profiler I get this result:
Yet when I use MacKeeper's Disk Usage Utility I get this result:
The biggest issue being, why is there almost 50GB of difference in Music alone? This computer has been through every OS since the one it came out with (think it was Snow Leopard), I have always used MacKeeper to keep everything in order and it's been running great ever since. But can somebody please explain where these discrepancies come from and how I can fix them?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Discrepancy Between Mobile Me Folders and Mail Folders on iMac

Hi there,
When I use Mail 4.2 and check the number of messages in a folder I see a different number from what displays when I log in on the web at www.me.com.
I checked under Library\Mail and my account for some folders and the Messages folder under a specific mailbox does not display any messages either. Therefore, it seems that the Mobile Me web mail is not giving a true representation.
I have also noticed that my Sync settings for Mobile Me keep getting unchecked when I look at those settings. I have to re-enable this on a regular basis. Could this have anything to do with my problem? I think this started after I enabled my Google account to sync with my address book and also iCal.
I have tried syncing and have no problems so I am not sure what else to check. I suspect that there are messages in folders that Mail is not able to access which is puzzling.
Ideas and suggestions as to how to proceed to reclaim the messages in Mail would be much appreciated. One folder in particular has almost 1 GB of data that is not showing up on Mail but when you open that same folder on webmail it is not displaying messages there either but I think they're present because I'm missing a large amount of e-mail.
Thanks in hopeful anticipation as to how to resolve this.
Lynn

As I said I thought I had solved this problem, but apparently I still have this situation. If I set up my .Mac mail account in a Mozilla application I see not only the current folders but also the names of any previous folders that were used on .Mac. I know the profile in Mozilla is not the issue, it's the .Mac account. Therefore, how can all these old folders on .Mac be permanently removed? They must be hiding somewhere on the server but how would this be tracked down? Would it have to be done by Apple? I'm talking about 25 folders that are affected, i.e., no longer used or resident on the account.
Any suggestions would be much appreciated.
Lynn

Difference between flash builder beta and flash builder beta 2 webservice.

hey guys... got a quick weird question, im using a lot of webservices, and i immidiately noticed the new thing in the interospection wizard, there is a new field in the wizard called "Data type package", i was wondering what that field is exactly??
i never noticed anything like that in the previous versions of flex,
from my understanding it just sticks all the main components under "valueObjects"
Thanks in Advance

so let's say you have some php service and it returns a collection of objects through amf.
for example your php has something like:
$array = new array();
$car1 = new car();
$car1->year = 2009;
$car1->model = 'ford';
$car1 = new car();
$car1->year = 2005;
$car1->model = 'audi';
$array[] = $car1;
$array[] = $car2;
return $array;
well, when FB receives this data (when your return the config type) it will recognize that you're returning a collection of objects, specifically a collection of car objects that contain two properties (year:int and model:String).
FB will offer to generate the Flex car class for you and you can store this autogenerated class in your valueObject folder (or whatever folder you want).
does that answer your q??
- e

Discrepancy between playlist on iPod and iTunes

**reposting this here as I don't think this problem is specific to iPod Classic**
I've selected all the music I want and put it into a playlist in iTunes. This list contains 16127 items and is 145.79GB (so, within the capacity of the iPod classic). I now want this music to copy, via sync, to my device. The problem is that it doesn't seem to believe the playlist is as big as it is. Whenever I go to "Music > Sync Music > Selected playlists > [my playlist]", "16082 songs" appears next to "sync music". If I do a full sync, which takes a while, obviously MOST of the music copies. But 55 items are missing somewhere. Weirdly, if I look at the playlist as it appears on the iPod (under "Devices"), rather than in iTunes, it is shown there as containing only 16082 items as well.
Since the list is so big, it's not practical to scroll through and compare both to find what is missing.
But does anyone have any idea what is causing this problem? How could I fix it?
To be clear, here is what I see in the status bar when I click on the playlist in iTunes:
https://www.dropbox.com/s/ly1rn982vl2s5is/Screenshot%202014-05-28%2002.51.30.png
And this is what appears when I tell it to sync with the iPod:
https://www.dropbox.com/s/1lyvspyagkbrhls/Screenshot%202014-05-28%2002.51.58.png

There are a few reasons why this might happen.
You could create a Smart Playlist in iTunes that includes anything not in your iPod Playlists. It would look like this:
and it should have all the missing items.
Note my use of the word "items". You may find that the missing items are:
Podcasts
Unticked items. Notice that my Smart Playlist does not have the "match only ticked items" turned on. So the Playlist will includes items that are not ticked. You may have put unticked items into your "iPod" Playlist, but if you have Sync only ticked songs and videos checked (turned on) then those unticked items would be in the Playlist but not on the iPod itself.
So start with the above.
What is in the Smart Playlist? Are they Podcasts or are they all unticked?
Alternatively, is there anything else common about the missing items?

Discrepency between ipad photo moments and ipad usage stats

Following a extended holiday overseas i downloaded a large number od photos via sd card reader, most of these have now been deleted and photo moments currently shows 320 photos however settings >usage> photos shows 4.5gb. If i connect itunes the usage meter also shows photos 4.5gb and 777 photos. ois 8.1 any assistance suggestion much appreciated ( have tried reset and restore )

You can't use Bluetooth to share the photos unless you use AirDrop and your Mac has to meet certain requirements in order to do that. You can read about that here.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
I'm not sure why you just wouldn't sync the photos using iTunes. That's how I move my iPhoto albums and events from my MBP to my iOS devices. The newest iTunes interface is not the same as this one, but the process still works the same way.
iTunes: Syncing photos - Apple Support
This one shows the latest iTunes interface.
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support

Huge Folder size discrepancy between 10.1 Managed and 10.0.9

I sure do Hope that someone can help me out with this.
I don't want to make any mistakes that would result in Data loss.
I have all my media for a large project I am working on on a Drobo 5D.
The Drobo has a total Max usable space of 16TB.
When FCPX 10.1 came out I upgraded and "saved" my old library. (Just in case)
Once the "upgrade" was complete there were two different directories on my DROBO there was:
"DROBO Old Final Cut Projects and Events" (which has a "normal" folder structure) &
"DROBO Final Cut Projects and Events" (which had the "contained / managed structure)
Shortly after I "upgraded" something happened and all my subtitles (all of the footage was subtitled... all 300 hrs) disappeared...
After about 3 hrs of freaking out I quickly discovered that the subs and all my old project files were still ok in the old (just in case) directory and all I needed to do to keep working was go back to use 10.0.9 which is what I have been doing.
However Now I have very little space on my DROBO and I want to get rid of the "newer" and unused "DROBO Final Cut Projects and Events" folder (which now shows up as a normal folder / directory as I no longer have 10.1 installed)
And here comes the QUESTION:
The numbers don't add up.... the new Folder (the one I want to DELETE for 10.1) claims a size of 8.06TB (on "10.1 FCP P&E")
and the old folder that I want to SAVE claims a Size of 10.79TB (on "old FCP P&E").
In addition to those folders I have an additional 3.5TB of other files outside of those directories...
OK so it doesn't take a rocket scientist to see that the "used" space on my Drobo according to my finder is 22.35TB which is already impossibly large as I simply do not have that space on the drive... So when I look into the new directory (the one I want to delete) all the files appear to be "real" and not aliases which was the first thing I thought may be the issue (something funny where it was counting the file twice...)
Anyway I just really want to DELETE that "new 10.1" directory however not at the cost of messing up my perfectly good 10.0.9 workflow.
Please advise.
thanks!

When updating from FCP X 10.0.x to 10.1.x The process uses what is termed "Hard Links" as opposed to Alias or shortcuts.
This means your Mac sees files of the old FCP X and the new version of FCP X as real files and hence what appears to be doubling up of space.
You have two different versions of FCP X pointing to the same hard files.
At some stage of the updating one set of FCP X files will be deleted making the numbers balance regarding space.
See here for updating details:
FCP X Library Updating
Watch all three sections, even twice, if you did not get it the first time to avoid simple pitfalls.
Backup you stuff before proceeding as the new FCP X will be 10.1.4.
The new version does NOT use the Projects and Events structure any longer, it has changed. See link above.
Al

Discrepancy between iTunes Library size and stored folder size

Hi
I'm looking around for ways to clear up my computer's hard drive, and typically it seems that my iLife libraries seem to be the bulk of it. The main problem is that iTunes claims that my iTunes Library size is some 21GB, when the size of the "iTunes Library" folder claims all the music accounts to 26GB. This doesn't include any content in the 'TV Shows' or 'Movies' folders.
The only thing I can think of is that not all of the music in my iTunes Music folder is in my iTunes Library... is there a simple way to check which ones aren't? Or is there another reason why there would be such a difference in the sizes?
Thanks in advance.

It may take some creative thinking rather than expertise to figure this one out.
Oh, and my girlfriend got herself a standard MacBook a month ago, which has possibly sown the seeds of envy since it has as much RAM and a faster processor than my PowerBook MacBook Pro-wise, let's see what MacWorld in 2 weeks brings
Then, it may be time to talk to the bank - or the finance people at Apple - about how best I can pretend I can afford one

Flash Player 10 and FMS 3: compatible ?

Hi,
Do you know about some problems that may occur between Flash Player 10 and FMS 3 right after bandwidth detection and before the video actually starts playing ?
In our player based on FLVPlayback, the video does not always play.
When it doesn't, we see that the FLVPlayback component establishes a connection then right after the TCP/IP connection with FMS is reset and nothing plays.
Regards,
Karl.

Hi, thanks for the info. You have the correct Flash files for IE. Look in manage add ons for Shockwave Flash Object and make sure it is Enabled.
Now you need to Install Flash Player into Firefox. Download the Flash Player Installer for Firefox and SAVE it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
Once you have done that, then Close all browser windows, you only want to be looking at your Desktop.
RUN the Installer and when it is finished, Reboot(restart) your computer.
Now look in you plugins for that SWF and make sure it is Enabled.
You had Installed Flash Player in IE, you just had not Installed it in FF yet. Now you should be fine and those Flash files should be in your Flash folder.
eidnolb

Record playback is very slow between Flash Server and Flash

hi all
I have done server side recording successfully with red5 flash media server and can see
that the flv record is being created properly.
Then if I try to playback the record like
NetStream.play("record.flv"), I see that stream playing is very very
slow, for both of audio and video.
And then if I try to playback the recorded file via using the
filesystem path of it, everthing seems fine.
Problem occurs when I try to sucscribe and play the stream of the record.
PS : There is no problem with playing the published stream
(NetStream.play("streamName"))
Does anyone have an idea about this issue?
If you need any additional information, please let me know.
Thanks in advance
Regards

Hello Fabio,
Just for confirmation.
Is the Integration Services is updated on all VMs on that particular host? IC version.
Could you please compare the vNIC properties/advanced between the functioning VM and the slowest VM network?
All VMs have one vNIC or more than one?
How are you copying out data from within the VM? \\IP Address\ OR \\DNS name\ ?
Is the file transfer issue around the same two VMs?
Could you please double check the Adapters and Bindings priority under
Network Connection\Advanced\Advanced Settings?
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

DIscrepancy between Flash Playback Speed and SWF

Similar Messages

Maybe you are looking for