Discrepancy in FS usage information

Hi,
We have a file system xyz and its usage is shown as 83% at SAP level. But when the same is checked at UNIX its usage is being reflected as 94%. Can any one brief about this discrepancy?
Thanks and Regards,
Damanaidu J

Hello Damanaidu,
what file system are you talking about (and how do you check it with SAP)?
If you talk about the sapdataX .. the sparse files (temp files for temporary tablespace) could be the reason.
http://administratosphere.wordpress.com/2008/05/23/sparse-files-what-why-and-how/
Regards
Stefan

Similar Messages

Capturing the JVM heap usage information to a log

When using weblogic 6.1sp3 the console under monitoring/performance a graph is
displayed with the historical JVM heap usage information. Is there any way to
capture this information to a log?

For heap size before and after each gc, you could pass the -verbose:gc option to the JVM
on startup:
WLS C:\alex>java -verbose:gc weblogic.Admin PING 10 10
[GC 512K->154K(1984K), 0.0068905 secs]
[GC 666K->164K(1984K), 0.0069037 secs]
[GC 676K->329K(1984K), 0.0029822 secs]
[GC 841K->451K(1984K), 0.0038960 secs]
[GC 963K->500K(1984K), 0.0015452 secs]
[GC 1012K->598K(1984K), 0.0027509 secs]
[GC 1110K->608K(1984K), 0.0029370 secs]
[GC 1120K->754K(1984K), 0.0027361 secs]
[GC 1266K->791K(1984K), 0.0019639 secs]
[GC 1303K->869K(1984K), 0.0028314 secs]
[GC 1381K->859K(1984K), 0.0012957 secs]
[GC 1367K->867K(1984K), 0.0012504 secs]
[GC 1379K->879K(1984K), 0.0018592 secs]
[GC 1391K->941K(1984K), 0.0036871 secs]
[GC 1453K->988K(1984K), 0.0027143 secs]
Sending 10 pings of 10 bytes.
RTT = ~47 milliseconds, or ~4 milliseconds/packet
Looks like it might be too much info though...
Cheerio,
-alex
Fazle Khan wrote:
When using weblogic 6.1sp3 the console under monitoring/performance a graph is
displayed with the historical JVM heap usage information. Is there any way to
capture this information to a log?

Tracking Access and Usage Information

Hi,
Is there a way to collect user VDI logins and logouts, along with other relevant information, like the DTU token, and possibly other usage information ? We provide open access to SunRay DTUs to connect to our virtualization platform, and we should be able to collect information like "who was connected, from when to when, on which client, etc.".
I've found the file "/var/cacao/instances/vda/logs/cacao.0" to log some of this information, but there is no timestamp in this file:
FINE: thr#1466 Logging user XXXXXX into desktop [202]XXXXX (some UUID)
I could not find information about auditing or usage logging in the Administration doc.
Any other pointer ?
Thanks for your help,
Laurent

Hi Laurent,
unfortunately, we do not provide a public/stable API for retrieving such auditing information yet.
As you already pointed out, there is some information in the cacao logs (but as stated that is not a stable interface). Regarding the missing timestamp, the log messages should always be two lines - first line with timestamp and source of the event, second line with the actual log message.
The other possibility to get some of the information would be to read it directly from the VDI database, but again you would be on your own here as direct access to the database is not supported (due to the fact that the database layout might change in future VDI versions).
- Klaus

Usage Information Access

Can the account owner block other users of the account from viewing usage information? If so, how can you do that?

If the users have registered for a MyVerizon account, they will be able to see their own usage online, and through the various text codes (#DATA gives you data usage, for instance). They will not be able to see full details for the account, billing information, or make changes unless they are designated as an account manager.
If you no longer want them to be a manager, you can change that online through the Account Owner's MyVerizon, or by calling in and asking to have their name removed.

How do I unselect your default selection for my personal usage information to be sent to Adobe?

Usually, software companies ask if you consent to send personal usage info for them to us anonymously (whatever they mean by that) to improve their product. The user is given the choice to click yes or no. Why do you take that option away from the users of your software by, essentially, stating that you are taking the info but the user has the option to stop you, if they can figure out how? I'm sure pointing out that the user has the option to take steps to prevent this is simply because the lawyers recommend it. But really, Adobe used to be such a classy company, why are you doing things that appear to be trickery to get what you want?

I remember that during the installation of Reader DC I was given a choice to send anonymous usage information. I selected the default Yes.
If I later change my mind I can simply go into Preferences and uncheck that option:

Wireless Usage Information

I reviewed my current usage this morning. VzW is claiming that I consumed over 3 GBs of bandwidth during a visit at a coffee shop. In order to do that, I would have to be doing video streaming! Is there a way for me to request additional information on the bandwidth consumption during the specific period where I supposedly consumed this much bandwidth?

That's quite a bit of usage in a short period of time ManInFull. Let's see what we can find out. I'm assuming you looked over My Verizon to verify this information. This would be the most helpful way to view the details available. What device were you using? If you have a MiFi or Hotspot that's unlocked, (no security), it could be that others were using your data. (WiFi off of your device.)
You can contact Technical Support to have a Diamond Ticket filed to investigate usage, but you'll be notified if data was used or not. Specific details will not be provided. If you would like to go this route, please Follow me and send a Direct Message with the 10-digit mobile number in question.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

No usage information for SharePoint 2010 or 2013

Hi community,
I try to retrieve information about SharePoint 2010 or 2013 usage (wich user access Enterprise or Standard feature, etc.).
I checked the configuration of IIS log files and it's ok. MAP Toolkit 9.0 parsed the log files, but didn't show any information about usage.
Did I miss something?
Thanks
http://mdeleplanque.wordpress.com

My bad, the date range was not set properly...
I retrieve users and devices in the report generated by MAP Toolkit 9.0 for SharePoint 2010 and 2013.
http://mdeleplanque.wordpress.com

Oracle Files - where do i get the usage information ?

Hi ,
I am with OracleDirect , India. I am working to generate reports on usage of files in Oracle Files like who has created and modified ,locked a file and when (history of usage) ? what all files a person has accessed,modified , create (user history) ? etc... Is this information stored any where ? if so , where it is and how is it stored ? Is it stored in database or is it logged to some log ? If it is database please let me know , what tables have it ? or else if they are logs , what logs are to be looked at and do the logs have a specified format? and How can i go about to get the information from them and use it ?
Thanks in advance ,
Prakash.

Bernhard (guest) wrote:
: thanx for the advice. I think the links you posted will be
: helpful in the future.
: I found the source of my troubles on the SUSE homepage (ver 6.1
: does not use glibc 2.1).
: So now I needto find out how to upgrade to glibc 2.1
Upgrading to SuSe 6.2 would probably do the trick. Upgrade is
really smooth, and will take approximately 1h. I was able
to run oracle 8i client install on my PC and it works (32M,
160MHZ pentium) quite satisfactory. On my server machine
(450MHZ, 128MB) I'm running RH 6.0 and it also works fine.
On SuSe, I removed the "Kaffee" JVM installed by default and
downloaded JRE 1.1.7 from www.blackdown.org. I haven't tried
the "kaffe" engine but Oracle documentation requires blackdown.
Michael, if you read this, have you tried installing with the
default JVM engine delivered with SuSe 6.2?
As long as your operating system name doesn't start with "MS"
you should be OK.
: But first I will buy me a book about LINUX administration and
: hope to find the time reading it.
: Colin. (guest) wrote:
: : Bernhard (guest) wrote
: : : But anyway: This is my first try to install anything on
: LINUX.
: : : If anybody has some good advise for a rookie re.
: installation
: : : of ORACLE SERVER 8.15 on Linux I would be very thankful.
: : Try these links, there's lots of good tips to be found (and
: : thanks to the authors of these sites).
: : => A SuSE developers home page for Oracle.
: : www.suse.de/~mha/oracle/
: : => Install Guide for Redhat.
: : jordan.fortwayne.com/oracle/
: : => Oracle tips & scripts
: : www.akadia.com/html/dod-frame.html
: : amoeba.sagemediagroup.com/oracle_linux_howto/
: : www.orafaq.org/
: : www.oracle-dba.com/
: : www.kevinloney.com/
: : www.bf.rmit.edu.au/~orafaq/contents.html
: : www.lazydba.com/
: : www.dbasupport.com/
: : www.dbspecialists.com/
: : altern.org/place4oracle/oracle_contents.html
: : www.dbdomain.com
null

Why is my usage information wrong?

Hello there,
So I'm in a similar boat to some other subscribers - I have the unlimited data plan and they're making me switch or pay full price for the phone to stay grandfathered in. While I'm not thrilled about this, I'd at least like to have the relevant information to make an informed decision. Knowing how much data I (and my fiancee, who is also on my plan) use is obviously the most important piece to this puzzle.
So I check 'my usage' I go to the account analyzer which shows month by month usage, and I download the last few statements. My bill looks fine for my phone number. It shows usage varying between 976.67 MB and 1959.47 MB for an average of 1388.24 MB. Normal numbers.
But my fiancee's bill can't be correct. For 3 months in a row it shows EXACTLY 1024.00 MB, and then for the last 3 months it shows EXACTLY 2048.00 MB for an average of 1536.00 MB. She has a limit of 2 GB so it shows as being under every month. It shows this on the account analyzer and also on each monthly statement.
When I spoke with a chap rep, they said whatever number is there is correct. But you can't tell me she has managed to use exactly 50.00% or 100.00% of her limit for each month over the past 6 months. Just not possible. To the 2nd decimal place. I checked and I don't have any of the family protection controls in place, where it blocks the data if you go over or get close.
So
A) How can I see accurate usage?
B) Why would Verizon not be showing me accurate usage?
I would appreciate any insight!!! I have looked through but haven't seen anyone else with this issue. The conspiracy theorist in me can't help but wonder if Verizon doesn't want me to make an informed decision, and instead would prefer if I either spend too much for data I don't need, or don't get enough data and have to pay them the ridiculous $15 overage charge.
Thaks!

stimsona2 wrote:
thx, but then why would mine be reported accurately and hers rounded to the nearest GB? I mean that's a pretty big rounding they're doing there! 1 GB is a big difference when they charge so much money for data
Edit: I guess I'll check the statement tomorrow and will know it's doing this if it shows 1.0 GB as used because today the period just ended and it's showing as 0.339 GB used on her line for Feb!
I am assuming you guys are on the old nationwide plans with separate data plans. Those on tiered data on Nationwide will only show data rounded up on the bill. Anything under 1 GB will be round up to 1 GB anything between 1.1 GB and under 2 GB will be rounded up to 2 GB. So yes her part of the bill will show either 1 GB or 1024 MB of usage.
Unlimited data users or those on More Everything plans the lines have the actual usage down to three decimal points

How to get temp table usage information??

Hi All,
How I can get the information about which SQL or process used how much temporary tablespace during a particular time period i.e what SQL used, how much temp space yesterday between 1 - 5 pm.
Thanks...

I think you need to write you own monitoring script (unless there would be some feature in OEM ?). I'm using following script that is run every minute to catch queries using a lot of temporary space (this query reports any SQL statement using more than 10 MB of temporary space for a 8K block size database):
select username, sql_text, (blocks*8*1024)/(1024*1024) as mb , segtype
from v$sql s, v$tempseg_usage t
where t.sql_id = s.sql_id
and blocks > 1280
order by blocks desc ;Message was edited by:
Pierre Forstmann

AMO to extract dimension usage information

Hi,
I am trying to get the details of the key on the fact that join to a dimension using the dimension usage NOT the dsv. I've seen the printer friendly dimension usage produce the answer so I am assuming I can get it. Every time I drill down a measure group I always end up getting the attribute key for the dimension.
I would have thought that this would get me to the tableID and columnID in the xmla in the cube:
Code Block_ocube.MeasureGroups[0].Dimensions[0].CubeDimension.Attributes[0].Attribute.KeyColumns[0].Source
as the xmla looks like:
Code Block
<MeasureGroups>
<MeasureGroup dwd:design-time-name="785ef530-8ab0-449e-b909-19561eb17a7e">
...<Dimensions>...
<Dimension xsi:type="RegularMeasureGroupDimension" dwd:design-time-name="e941d609-3a0e-4dd3-af38-99fd8d31c7ca">
<CubeDimensionID>Small Date</CubeDimensionID>
<Attributes>
<Attribute dwd:design-time-name="ce664bae-a9a3-4f77-b2f2-04f0c18e2960">
<AttributeID>DATE_KEY</AttributeID>
<KeyColumns>
<KeyColumn dwd:design-time-name="1978bf6b-13c8-4085-9125-ab368cd0d71a">
<DataType>Integer</DataType>
<DataSize>-1</DataSize>
<Source xsi:type="ColumnBinding" dwd:design-time-name="3f763005-6a4f-4462-9f83-20a7f4a1c4e5">
<TableID>IIP_MART_DAILY_SALES_FACT_V</TableID>
<ColumnID>TPNM_PROPOSED_START_DATE_KEY</ColumnID>
</Source>
Any help would be gratefully received, as i have been going around in cycles for hours now
Many thanks
Matt

Found the answer, thanks to the guys who produced BIDS Helper
http://www.codeplex.com/bidshelper
I looked at the code for the PrinterFriendlyDimensionUsage class and I found out how to get what I wanted. So many thanks to all those invovled in that.
Code Block
foreach (MeasureGroup mg in _ocube.MeasureGroups)
foreach (MeasureGroupDimension mgdim in mg.Dimensions)
if (mgdim is ManyToManyMeasureGroupDimension || mgdim is DataMiningMeasureGroupDimension || mgdim is DegenerateMeasureGroupDimension)
//call attribute usage stuff
else if (mgdim is ReferenceMeasureGroupDimension)
//call attribute usage stuff
else if (mgdim is RegularMeasureGroupDimension)
RegularMeasureGroupDimension regMDdim = (RegularMeasureGroupDimension)mgdim;
foreach (MeasureGroupAttribute mga in regMDdim.Attributes)
//gets the dimension info
foreach (DataItem di in mga.Attribute.KeyColumns)
string tableid = ((ColumnBinding)di.Source).TableID;
string columnid = ((ColumnBinding)di.Source).ColumnID;
//gets the fact table info
foreach (DataItem di3 in mga.KeyColumns)
string tableid = ((ColumnBinding)di3.Source).TableID;
string columnid = ((ColumnBinding)di3.Source).ColumnID;
//call attribute usage stuff
Matt

Data usage information

I have a Bigpond WIFI Device 4G Advanced 11 . Recently it has not been showing usage used and available , Message says Data usage info unavailable at this time. Why is that .

HelloPlease can you explain where or which program or app you looking for your usage.Thanks

Discrepency on Text Usage

When checking online, my texts say I used 236. When checking via 'my verizon' on my phone, it says 203. Huh?
Which one is correct? I'm assuming the online number. But why the huge difference? That could cost a lot if customers go over!!

Thanks to the budone for your input. Additionally, the amount of the texting usage given online, or on your device via My Verizon is an estimate of the usage. Text usage amounts can vary between both sources because of the data needing to be updated and refreshed on the network. This is why you could see different amounts. To get the most updated estimate we recommend dialing #DATA or #MIN from your phone as this is as close to real time you can get.

Since OS 6 upgrade unable to sync contacts and calendar, receive the following error message: Help Apple improve its products by sending us diagnostic and usage information about iCloud. By sending this message, you agree that Apple will collect and use

Unable to sync contacts and calendar with HP Laptop using MS Outlook 2010 and I-phone 4gs since OS 6 upgrade

The activation server is gone for AA7, but not AA8 as understand it. You will need to do the updates for AA8 to be effective on Win7. It is questionable that it will run on WIn8 (I have no clue for a MAC).
Your conversation is an example of how many of us got here in the first place. It is fantastic that you were able to hold on and get the problem resolved. Not exactly sure of the solution, but there does seem to be light at the end of the tunnel for folks. Normally, with activation problems like yours, we recommend calling Adobe Support for them to reset the activations. I was just wanting to get a heads up about AA8 on the newer systems. Folks have been successrul on Win7 with the updates, but the results for Win8 are still not known in general. There have been some suggestions, but nothing more. As long as it works for you that is great. For our info, what OS are you running?

Site Collection Web Analytics Reports - Storage Usage

Hi All,
under the Inventory section in the Web Analytics reports no storage usage information displays for most reports
The interesting thing is that if I select a Preceding Report (90 days, 180 days etc) that it will show me all the information up to today's date accurately, does anyone have an idea why the Preceding Day/Preceding 7 days report doesn't work but the others
do?

Hi James,
Have you checkd if the web analytics data has been updated to today?
You can check if the Web Analytics configuration is working fine per the following posts, and also check ULS if there are any useful messages for troubleshooting this issue.
http://geekswithblogs.net/rgupta/archive/2011/02/16/site-web-analytics-not-updating-sharepoint-2010.aspx
http://social.technet.microsoft.com/wiki/contents/articles/17898.sharepoint-2010-how-to-use-web-analytics.aspx
http://blogs.technet.com/b/manharsharma/archive/2012/10/13/sharepoint-2010-web-analytics-troubleshooting-reporting-db.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Discrepancy in FS usage information

Similar Messages

Maybe you are looking for