Discs?
I'm new to both Final Cut Express and iDVD. I created the movie just fine, saved it as a Quicktime movie (unchecking "make movie self-contained" as suggested elsewhere), imported it to iDVD '08 fine (that is, it is readily viewed through preview) but have gotten the multiplexing error. Am I using the wrong type of disc (Sony DVD-R)? Should the Qucktime have been saved as a self-contained project?
Thanks
A reference movie should be OK. Try creating a disk image file out of iDVD (and option under FILE). If this works, you can use Apple's Disk Utility to burn the disk image to writable media.
If you have problems creating a disk image file, you need to check your FCE movie to make sure all is correct.
F Shippey
Similar Messages
-
My Macbook is not working. i dont know what to do. Please help
hello asterfromscarbourough,
your Macbook Pro should have came with some discs. One for Installing the OSx and the other for applications. You must find these 2 discs to fully install the software on your computer. That is all I can suggest. -
How can I repair Vista system files with only a Toshiba recovery disc??
I have pretty much come to the conclusion that the reason I can't install Vista service pack 2 is due to some corrupt vista files. I ran the program that checks that system files and it said some are corrupt. There are some things I can't do, like turn on the Windows firewall even from that special adminostrar screen, or if I schedule a check disc scan, when I reschedule it for start up, it doesn't do it at startup. I had a Red Screen about a year ago, and it did a bunch of stuff and at the end, it said you had a major event and contact your administartor. Well, I am the administartor, lol. Anyway, it worked fine and I attribute these problems to that event.
Vista discs come with a repair option. All I have is the Toshiba disc that lets you reinstall the Toshiba and Vendor applications OR reformat the hard drive. I am not going to spend days trying to get my system back to where it is by tracking down everything I have installed especially when its working. Is there a work around? I will buy a Vista Home Premium disc if I have to before refortmatting. I have an x205-S9349 with Vista Home Premium. THANKS!Satellite X205-S9349
I ran the program that checks that system files and it said some are corrupt.
Sounds like System File Checker.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows...
To follow up...
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program ge...
can't install Vista service pack 2
Maybe this helps.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
Notice that you can get free support from Microsoft.
Free Unlimited Support Vista Service Pack 2 sp2
-Jerry -
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?
The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.
-
Can't sync iPod - Error Message: "disc cannot be read from or written to"
My ipod had been working fine until recently when every time I try and sync it I get the following error message:
"Attempting to copy to the disk "iPod" failed. The disk could not be read from or written to"
I have tried all suggestions in Apple's support article for this issue but nothing works. Does anyone else have this problem or know how to solve it?
Thanks a lot.
H
Macbook Pro Mac OS X (10.4.10)
Macbook Pro Mac OS X (10.4.10)Hi all,
I am sorry to report that I too have this same disc error problem when syncing my iPod to my iTunes library. I take no comfort in knowing that I am one of many that have this same error. I checked on the iPod lounge forum and I just couldn't count the number of users that had the same problem. There are just so many!
I too have tried "5 r's" and I have also tried using a few "s" words and others...lol.
It seems like there is no "fix" for this problem but I will say this: If there is no solution, then I will no longer be buying iPods. This is my third iPod that I have purchased. Which makes my Apple investment near the thousand dollar mark. That is way too much money spent to not have a functioning music player. I will be switching to another player to see if the grass is greener on the other side.
I have been most dissappointed with this error and I will not be "recycling" this iPod for ten percent off of my next iPod purchase. -
I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?
Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G. -
A few weeks ago I noticed my MacBook Pro was unable to open or read, etc... DVDs. This included DVDs with jpeg photos on them and DVD videos. I thought I might have deleted something necessary to DVD use. So I tried to re-install OS software. This included Snow Leopard and the original two Mac OS X discs. None would open or play or install. All were spit out of computer soon after I stuck them in.
So now what can I do? Thank you.Do you recommend the canned air
It works just as well as the regular cleaning discs works. The only disadvantage is that you will need to keep purchasing canned air once it runs out. Cleaning discs last forever or until the tiny bristles on the disc wears out. Whichever comes first.
Any store that sells cds & dvds will also sell disc cleaners. Prices vary but they all do the same thing - clean your slot drive. -
HT1461 can i use boot camp if i no longer have my windows xp installation disc?
i have my old PC with XP Pro installed but it's been years since i purchased the computer and no longer have the installation disc. Can i still run boot camp without the disc?
Brad Spalding wrote:
i have my old PC with XP Pro installed but it's been years since i purchased the computer and no longer have the installation disc. Can i still run boot camp without the disc?
You mean, Can I still run boot camp without Windows? because that is what you will have, one empty boot camp partition. Buy a copy of Windows 7. -
Error 4260 - I can't burn a disc
Been looking for solutions all day.
When ever I try to burn something it gets to about 1/3 of the way and then ejects and gives me the 4260 error message. Using Sony CD-R Audio 80min discs. I've tried using other discs. It wasn't doing this last week. I was thinking it was the CD type, but I'm not sure. I've been told to use a reg fix.
I'm not a computer person. Thanks for the help.
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Dell XPS420
iTunes 10.1.0.54
QuickTime 7.6.8
FairPlay 1.10.14
Apple Application Support 1.4
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.0.69
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number <Serial Number Removed by Host>
Current user is not an administrator.
The current local date and time is 2010-12-18 16:25:32.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3650
** External Plug-ins Information **
Plug-in Name: TuneUp Companion
Plug-in Loaded: Yes
Plug-in Version: 0.0.5
Plug-in File Version: 1.1.0.0
Plug-in Path: C:\Program Files (x86)\iTunes\Plug-ins\iTuneUp.dll
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {C6F8CD4A-59C2-4D36-B264-D7A2D35013FC}
Description: Intel(R) 82566DC-2 Gigabit Network Connection
IP Address: 192.168.1.108
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 18 13:47:53 2010
Lease Expires: Sun Dec 19 13:47:53 2010
DNS Servers: 205.152.37.23
205.152.144.23
192.168.1.1
Adapter Name: {1B0977FC-B6CC-4B92-B7DA-AF2B1738E901}
Description: Hamachi Network Interface
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 5.0.0.1
DHCP Enabled: Yes
DHCP Server: 0.0.0.0
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Last successful store access was 2010-12-18 15:19:13.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: HL-DT-ST DVDRWBD GBC-H20N, Rev C102
Drive is empty.
Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4260(0x000010a4). It happened on drive E: HL-DT-ST DVDRWBD GBC-H20N on CDR media at speed 8X.
** Device Connectivity Tests **
iPodService 10.1.0.54 (x64) is currently running.
iTunesHelper 10.1.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod nano (2nd Generation) running firmware version 1.0.2
Serial Number: 6U640X02VQ5
** Device Sync Tests **
No iPod, iPhone, or iPad found.probably admin account is required to burn it
http://speechlab.bu.edu/xml/6/25/index.html
http://speechlab.bu.edu/xml/6/26/index.html
http://speechlab.bu.edu/xml/6/27/index.html
http://speechlab.bu.edu/xml/6/28/index.html
http://speechlab.bu.edu/xml/6/29/index.html
http://speechlab.bu.edu/xml/6/30/index.html
http://speechlab.bu.edu/xml/6/25/map.html
http://speechlab.bu.edu/xml/6/26/map.html
http://speechlab.bu.edu/xml/6/27/map.html
http://speechlab.bu.edu/xml/6/28/map.html
http://speechlab.bu.edu/xml/6/29/map.html
http://speechlab.bu.edu/xml/6/30/map.html -
Error:the ipod cannot be updated. the disc could not be read from or writte
May sound silly I am sorry, new to this. Just got an ipod shuffle and have gone through all troubleshooting suggestions ie: restore ipod, reinstall software etc. Am getting an error: "The ipod "administrator's ipod" cannot be updated. The disc could not be read from or written to". This occurs when I click and drag a playlist from the source section to my ipod in the source section. Getting a wee bit discouraged by reading all the problems associated with this ipod and am hoping for an easy fix to slide past further frustration. Please help. Thank you muchly.
Windows XPGo to the iPod Shuffle Support Page, look around in there, and follow the troubleshooting steps in the article entitled "Can't be written to" or words to that effect.
-
External Hard Disc won't mount - Partition Map error. Can't repair with Disk Utility
Happy New Year all and thanks in advance for any support/advise.
I have some important data on an external drive that does not seem to want to mount. The drive is a 500 GB Seagate connected via USB. I am currently on an iMac 3.06 GHz Intel Core 2 Duo running Yosemity 10.10.1
What I've tried:
Multiple computers - connected the drive to various apple computers with the same result.
New enclosure: I have removed the actual HD from the enclosure and connected it using a new one.
Disk Utility: Verifying Disc reports the following error: 'Error: Partition map check failed because no slices were found.' Screenshot below:
I have searched this and other forums and run a few commands in Terminal that seem relevant to the issue, but am out of my depth in terms of interpreting the results. Thank again for your attention!!!
Commands run in Terminal:
diskutil list
diskutil cs list
mount
diskutil info disk1
Full Results pasted below:
diskutil list...
Ethan-Smiths-iMac:~ Ethan$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 999.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk1
1: Microsoft Reserved 134.2 MB disk1s1
diskutil cs list...
Ethan-Smiths-iMac:~ Ethan$ diskutil cs list
No CoreStorage logical volume groups found
mount...
Ethan-Smiths-iMac:~ Ethan$ mount
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
diskutil info disk1...
Ethan-Smiths-iMac:~ Ethan$ diskutil info disk1
Device Identifier: disk1
Device Node: /dev/disk1
Part of Whole: disk1
Device / Media Name: ST950032 5AS Media
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 500.1 GB (500107862016 Bytes) (exactly 976773168 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supportedSelect the disk1s1 volume under the main drive entry, then click on the Mount icon in the Disk Utility toolbar if it goes active and see if a volume then mounts on your Desktop. If it does not, then you need to reformat the drive. And, you cannot access the volume in order to copy your data somewhere else. If you are willing to spend money on the problem, then you can always try using a software recovery utility:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery. -
To start at the beginning; Just under 3 years ago, my ex wife bought my daughter (then 12) an HP G56-105SA.
A year ago my daughter moved back in with me, and brought it with her.
Just the lap-top and power supply. No Recovery discs; no manuals; just the bits she used.
Last week... she had teen-age hissy-fit, because it didn't work... this became MY problem.
Of course, being ancient and obtuse and a PAIR-RENT...I am probably missing the obviouse, like that it's almost Christmas, and what she really wants is a new i-pad.... but she ent getting one... not off me least ways, so I'm stuck trying to fix this thing, so she can do her home-work, and be doubly ungreatful!
So to the facts.
1/ I started by switching it on.... which resulted in black screen and 'No Bootable Device' message.
2/ Turned PC over, undid HDD cover; removed HDD, and cable; re-seated & replaced; turned on again. No Change.
3/ Removed HDD - Plugged into spare SATA slot on my desk-top.
Curiousely, it threw up four drived;
E: which appeared to be a ghost, with nothing on and capacity of the discs full 250Gb.
F: Which was her C: Operating System partition; aprox 170Mb with all windows directories present and accessible.
M: HP Restore
N: HP Tools
As suspected... her C-Drive (My F) was chocka-block with barely 3% free space.
3.1/ I took my life in my own hands... and deleted six seasons of 'Glee'..... and transfered the less than a dongle sized directory called 'Home Work' to my desk-top. I emptied her recycle bins.
3.2/ I ran disc tools on my (Win XP) desk top; and applied Disc Clean Up. Took a while, and I dont think freed much.
3.3/ I ran disc tools....... and applied Scan Disc, full scan and fix... and 24 hours later it told me it had fixed things!
3.4/ I ran De-Frag... and another 24 hours later.. it looked reletively healthy; with about 40% free space.
4/ Returned Hard disk to Lap-Top.... pressed start.... same black screen! Pressed f2, used diagnostics; got 'Hard disc Not Exist'
5/ Asked Daughter if she had the HP Factory Restore discs..... she looked at me as only a teenager looking at ancient, obtuse, and utterly STOOOPID pair-rent can.... you know, like she had discovered something unsavory on the sole of her shoe, she had never seen before...... with added contempt.
Phone calls and text messages in her bedroom followed; the unhelpful conclusion of which was... "Mum says, you just run Recovery from the Hard Drive" ... aparently she had argued that actually when teh computer was first switched on, it would have asked to 'make' recovery DVD's.... but aparently her big-brother had sorted that all out, and said you didn't need them, as it was... on the hard drive.... Can ANYONE tell me why I married the woman? I'm SURE there must have been a reason... but for the life of my I cant think what it could have been!
6/ I returned HDD to my desk-top. I found the pdf user manual, and found the 'make restore disc' instructions & tried running the make program on my desk-top.... it refused telling me what I already knew... my desk-top isn't an HP G56!
7/ HASSLED as home-work was now due, and she couldn't print it off my Desk-Top, as I dont have the latest version of MS Office she uses at school..... I went back to basics; pulled Windows 7 install disc from the draw, went to HP support and down-loaded ALL the driver files for an HP G56-105SA...
8/ WIPED THE LAP-TOP HARD DRIVE - in XP on desk-top, removed all partitions, then re-formatted the disc, ready for 'fresh' install of Windows 7 and 7 alone, without all the HP factory pre-installs.... get it running, and then worry about installing whatever software she wants/needs after seperately; and with bit of luck, without partisions or extraniouse would-you-like-fries-with-that programs cluttering it up; might give a bit more space so takes a bit longer till its clogged with 'glee' again.
9/ Inserted HDD in Lap-Top. Switched on... opened DVD draw; switched off. Inserted Windows 7 disc; switched on.
ALL looked very promicing, and Got windows back-ground, USB mouse, and win 7 install prompts... up to "Select partition to install operating system'.
HDD showed in the drop-down box as 'Disc 0' with full 250Gb available and healthy
BUT message below "Windows 7 cannot install on this divice - Not bootable" clicking for details... said check bios to ensure HDD management enabled.
10/ Switched off, went into bios... NO options for doing anything with HDD as far as I could see; while 'system diagnostics' chucked out error message "Hard disc Not Exist"
11/ Repeated Windows install... and at prompt tried putting in DVD of down-loaded HP Drivers to load a disc controller... told me there were no drivers on the DVD ( they were all executables I presume intended to be run after Windows install)
12/ My 'data' Hard-Drive was sat on teh desk where I had removed it to plug in her lap-top disc. JUST for reference... I removed her Lap-top HDD and plugged my Desk-Top HDD in to see if the lap-top would recognise ANY disk... answer no it didn't.
SO... it would appear that the Lap-Top HDD is 'OK' we have fault on the Lap-Top, which recognises the HDD under windows install... but not under the Bios.
I found this forum looking for hints where to go next, and did find this thread: http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/my-laptop-says-my-hard-disk-does-not-exi...
BUT, whils seemingly the same problem... that was fixed by my first intuative check, taking the HDD out and replacing it.... but ent solved this one.
So what next? I'm starting to run out of inspiration... and no chance is she having a new lap-top this christmas!teflon-mike wrote:
Follow the instructions on this tutorial page to make a DBAN on a usb flash drive that is at least 1GB.
OK, followed instructions; down-loaded and ran executable. Selected DBAN v2.2 from drop down as instructed (only option with DBAN in title); 2nd dialogue asked for ISO file, entered DBAN in download dir; it asked to create, clicked 'y', then selected 4GB USB flash as destination, and 'run'. Went into a command screen, and 'did-stuff' with two error messages; first saying something couldn't be found; second that DBAN 2.2 'not supported'.
Popped dongle into the Lap-top anyway; files were written to it; entered Bios and set Boot order to USB-Floppy first... returned "BootMNGR is Missing" & prompted re-start.... A USB thumbdrive (or flash disk) is not a dongle. That is a different technology for licensing firmware contained in a usb device.
So, tried & failed, BUT.. the lap-top hard drive is 'blanked' It's been scanned, formatted, un-partitioned & reformatted, and shows as a factory fresh HDD would out the packet. So do I really need to use DBAN to 'nuke' it? Yes. it is a good plan to nuke the hard disk. It sounds like you need a different tutorial than the one I provided.
then do a Windows 7 install. This time use the Microsoft store's Windows 7 DVD\USB download utility to make a usb installer.
Thanks; but I dont really want to buy another licence for an operating system (I actually dont much like!) I already have licences for, already have DVD's for, but not bought through Microsofts Down-Load platform so I dont have anything in my purchase history and so would have to buy as if new JUST to get a version that loads through a USB port.. when its loading hapily enough from DVD... just not happy to install to the HDD, its actually recognising, and I'm just as likely, I presume, to get the same problem, of it refusing to install to HDD from a new USB drive version as my existing DVD version, for the expense and trouble.... unless I'm missing a leap in the logic here?
The Microsoft DVD\USB download utility name is actually a misnomer. I don't know why Microsoft called it that. It is actually a usb installer and DVD installer creation utility. It does not require you to purchase anything. Use the license that you already have when using the USB installer during a Windows 7 installation. There is no need to buy another. Licenses are always diistinctly seperate from the installation disk(s) or ISOs. It is the same thing as a DVD installation disk except much faster.
You don't necessarily need to use an ISO image as suggested in the following video. You can also use your Windows 7 installation DVD as a source for the Windows 7 DVD\USB download tool.
Any other suggestions, any-one?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life. -
HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.
I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
Has anyone encountered the same issue?BCA creates the partition as FAT, which the installer needs to format.
Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case? -
Win 8.1//Recover error at fourth supplemental disc//Detect some error during PININST_BBV.
Hii Team,
Please find the product details for your need full:-
Product number: F6C57PA#ACJ
Product: HP ENVY TouchSmart 15-j109tx Notebook PC (ENERGY STAR)
Issue- recovery attempt has failed select one of the three buttons.
Below is the error log in the notepad:-
[13:34:51.78] ChkErrBB.CMD : Detect some error during PININST_BBV.
[13:34:51.78] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[13:34:51.78] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
Tss to isolate the issue:- Bios updated no go, bios defaults no go, checked with another set of rcds but same issue on the fourth discs on different dvd's also.
RCD kit Part#:-
749548-D62
749549-D62
749550-D62
752228-B22
Error Comes at recovery dvd:- 752228-B22.
HP Experts kindly intervene with the case for a way out from the issue asap.This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
Please see HP Forum thread Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults;
1) Boot computer – immediately click / press F10 to get into the BIOS Manager.
2) Press F9 to set the BIOS to factory default.
3) Press F10 to "Save and Exit"
4) Redo the Recovery – remember to leave the wireless light “on” during the Recovery
Other thing to try: don't use the supplemental disc... set the system date in BIOS to 2012... run "Minimized Recovery" instead of "Factory Reset"
I currently have the same issue with my HP 15t-j100 CTO and HP 13 Split x2 (both on loan from HP). I have tried various fixes/solutions posted on the forum, but haven't been successful in recovering my computers. In both cases I an using a USB Flash Drive set up as HP Recovery Media. It appears you are using an external CD/DVD drive and 4 DVDs as your HP Recovery Media. My computers display a "Restoration Incomplete" dialog box and CTOERROR.flg displays;
Please contact HP in your country / region, via the HP Worldwide Support Portal, for official HP assistance.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/
Maybe you are looking for
-
My iPad mini screen is fuzzy down one side
My iPad mini screen is fuzzy down one side. Can anybody please advise on a fix Many thanks
-
Error using Window Server Backup on 2012R2 Hyper-V to network share
Hi I have a Windows 2012 R2 Hyper-V server. It runs a Windows 2012 R2 VM (called server-1). I want to backup the VM to a network location (\\network-1\server-1_backup$). To do this, I installed Windows Server Backup from the command line and configur
-
hai what is rollin and rollout ? what is saint update?
-
Bringing back an old password validation rule
Good afternoon On our old 4.6C system, there was a password validation rule that stated the first three characters of the password cannot occur in the same order in the user ID. This rule was removed when we upgraded to ECC 6.0 While the users hated
-
Howto disable 1394 firewire port in audi
I have a firewire port in the Audigy 2 audiocard, and also a firewirecard with 3 inputs, supplied with the motherboard. I cannot use the firewirecard of the motherboard for some reason or the other. When I plug in a camera, this device is not recogni