Discusion articles not wrapping to window

I've got my Safari window almost the whole width of the screen, but the topics are not wrapping - they extend about twice the width of the window. Tried restarting but no change.

Hello Again Dessicator!
Is the appearance the same on all pages, or a particular page, as Jpfresno inferred?
If it is a particular page, can you post a Link/URL to it?
ali b

Similar Messages

  • IPOD suddenly not seen by windows any more - I am desperate!

    PLEASE HELP ME!
    I have been using my 30Gb ipod happily since Xmas with no problems at all, until suddenly 1 week ago my main computer (through which I synch my ipod with itunes) stopped recognising the IPOD (not found in device manager or my computer etc), but continues to charge the ipod normally (ie the charging icon appears).
    I have gone through document Knowledge Base Document #61711 and done everything to no avail.(When I say everything, that is except carry out the restore option which I can't do beacuse the updater doesnt see the ipod - why do they put this advice if windows not recognising ipod?)
    I have tried plugging the ipod into other computers and the same happens - they charge the ipod but do not see it, even in disk mode.
    I don't know what else to try. Is it possible to manually restore the ipod? I managed to get through to some diagnostic tool on the ipod manually (M25 diagnostic) by clicking left and select after the resetting, and the automatic diagnostic didnt find anything wrong??
    Any ideas? Please help as this is now getting me down..

    Try reading through this article:
    http://docs.info.apple.com/article.html?artnum=93716
    Hope this helps
    rjl
    ( Jeff was my old account )
    i have the exact same issue. this article doesnt help beucase windows can't see the ipod at all. i've done as much as i can but i can't do anything to the actual ipod becuase my computer can't see it! booooooooooooo
    it worked perfectly until recently.

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • Text will not wrap around a photo in indesign cs3?

    we have tried EVERYTHING. we use adobe indesign for our school newspaper and for the past 3 days we have been trying to get one of the articles (text) to wrap around a photo.
    the photo is a simple rectangle shape. for all of the other pages, the text wraps around photos perfectly fine. but for some reason on this one page it will not wrap around any picture at all.
    of course "text wrap" is selected for the photo and we also tried going to the text frame options and unchecked ignore text wrap. that still didn't work.
    we tried putting it on "detect edges" and that also did not work. ):
    please please please if you have any suggestions, add them!!! we really need to fix this issue because this page needs these pictures!

    I just encountered the same problem, the text did not wrap around the image whatever i did. I found the solution on my problem, that i had an imagebox underneath the image, which i was not aware of. I discovered it when i deleted first the textframes and the image. After i deleted the second imagebox the text wrapped around the image as i wanted it!

  • I-tunes not working in Windows 7

    I have been using i-tunes for a couple years without problems.  Recently I keep being told i-tunes is not working and Windows shuts it down.  I have repeatedly reinstalled it - earlier times as a "repair", then have uninstalled i-tumes and reinstalled it, but the problem persists.  Lately it has said something like "Apple Device Manager not installed", but since i-tunes shuts down there is not a way to care for that in i-tunes, if that's where it needs to be activated.

    yeah in some cases creating a new iTunes library file could fix issues like that mostly because when iTunes tries to access a bad library file iTunes will take so long to analyze bad information and it eventually crashes for issues like that you should try these articles
    http://support.apple.com/kb/TS1421?viewlocale=en_US
    http://support.apple.com/kb/TS1717?viewlocale=en_US

  • Report not opening in windows 8

    hello all,
    on some machines report not opening after windows 8 installed can anyone had this issue .
    Please help..
    Dilip Patil..

    Hi Dilip,
    Based on my understanding, you want to open reports on some machines which have Windows 8 installed, right?
    Regarding the issue, we couldn’t understand it clearly, and we would like to confirm something from you below:
    1. Which method have you tried to open reports, SSDT, report manger or another application?
    2. Have you installed SSRS on the machine which have Windows 8 installed? If so, have you checked if the version of SSRS is supported on Windows 8? 
    3. On which version of SSRS you create those reports? If those reports open with a higher version of SSRS, you should refer to this
    article to upgrade the reports firstly.
    So in your scenario, please provide more information about the issue then we can understand the issue clearly.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • IPod not detected by Windows or iTunes!!

    I bought a new iPod Video days ago but it's not detected by Windows/iTunes!!
    However, it worked when I connected my old ipod mini...
    Any reply would be appreciated.

    hi,
    try the following article my friend...it will definitely resolve your problem..
    http://docs.info.apple.com/article.html?artnum=302420
    http://docs.info.apple.com/article.html?artnum=61711
    Regards,
    Sam

  • Ipod not read by Windows or itunes

    I have an older ipod clickwheel. It worked beautifully until 10/15/08 when my computer ("computer A") automatically installed Windows Vista updates. When I connected my ipod to the computer's USB port, I got a nasty whirring sound and it did not appear in Windows or itunes. I toggled hold switch, reset and disconnected. I then connected it to my laptop ("computer B") and it worked perfectly. Now laptop has automatically installed Windows updates (Windows 2003, not Vista) and the ipod is doing same thing on that computer -- endless whirring, frozen up, not recognized by Windows or itunes. When I reset my ipod, it works fine, but I can't update any of my music/podcasts because it won't sync. It's forever stuck on 10/15/08 content. What should I try next? Thanks

    erfva,
    If you can get the iPod recognized in iTunes, you can always attempt to restore it: http://support.apple.com/kb/HT1339
    However, if it's not recognized in iTunes you can attempt to format it using Disk Mode, using your Windows OS (just like you would format any drive). Here is a good article on what to do if the iPod is not seen in iTunes: http://support.apple.com/kb/TS1373?viewlocale=en_US
    Unfortunately beyond that, especially if it's making whirring or clicking sounds, it can be a hardware failure which would require service: http://support.apple.com/kb/TS1382
    Hope this helps,
    Raleigh

  • HELP Ipod shuffle is not recognised in windows or itunes

    Ok I got my ipod shuffle for my birthday but I got I beforehand so I could add songs. First it worked fine,played songs,was recognized in itunes but then the next day when I tried playing the songs using my ipod shuffle the error light flashes.I left it for another day and checked again.error light still flashing.I then connected it too the computer.not recognized in windows or itunes.it is extremely annoying.i have re-installed the software twice,got more updates and i have read all the tutorials but still the exactly same problem.i am getting incredibly annoyed with it and so is my dad.please help!
    Thank you for your time,
    Sophie

    Did you try all the steps here:
    http://docs.info.apple.com/article.html?artnum=61711?

  • Nano not recognized in windows or itunes

    Hello all, I have a new laptop with windows 8.1 and will recognize my ipod touch but not my older nano, it's like i doesn't exist. It's not in itunes or USB drivers. I've tried reinstalling itunes, tried different leads, it works still on my old pc. Is there a compatibility issue maybe ? thanks

    Hello jjbell7,
    The article linked below details some useful troubleshooting steps that can help get your iPod Nano communicate with your computer.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    http://support.apple.com/kb/TS1496
    Cheers,
    Allen

  • Replacement Shuffle Still Not Recognized In Windows Or iTunes

    Hello everyone,
    I was having the orange/green light issue and my 512MB shuffle was not recognized in Windows or iTunes 7.0.1. I contacted Apple and they replaced my shuffle - after I attempted all documented fixes and running the Shuffle Reset Utility.
    I plugged the replacement in and received the message "xxx iPod shuffle cannot be updated. The required disk cannot be found." I found an article on how to remove some temp and application files. I did that and also ran "checkdisk" on my laptop and that error went away. The problem is now the shuffle is not recognized in iTunes or Windows once again. The shuffle did come up for less than 10 seconds as the "F" drive and then disappeared and could not be relocated.
    Here is the real rub for me - I plugged the shuffle into my wife's laptop running iTunes 7.0.1 and it works just fine!! Since my laptop is my primary - this is still a major issue for me.
    Does anyone have a fix for this? This has to be a Windows disk or driver issue.
    Does anyone have a fix for this type of issue? It is obviously a Windows disk or driver issue.

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Then try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, see these.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod</font color</a>.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • Shuffle is not recognised by Windows or iTunes on first installation

    Hi
    Just got an Ipod shuffle, which was marked down in price due to missing ear phones. Tried the installation software but when asked to connect shuffle to check to see if it needs formating did so, and the shuffle is not recognised by windows or the installer software.
    Tried to go through apple chat, but when prompted for S/N it says that my shuffle was registered in Aug 2005 and not valid for chat support anymore. I suspect that the shuffle is returned goods and that it may already be registered to another user. Would this stop my computer recognising it?
    Have downloaded updater and run that, same result.
    OS is Windows XP Pro
    USB port confirmed working
    Itunes 6.0.4.2
    Ipod Nano running okay on same machine.
    Ipod Shuffle is only showing constant green light when plugged into USB port (showing that it is at least getting power)
    Any ideas, there seem to be similar threads to this so is it a common problem.
    thanks
    CDR

    Did you try all the steps here:
    http://docs.info.apple.com/article.html?artnum=61711?

  • Nano not recognised on windows or itunes and will not charge, help!!!!

    i went to update my ipod the other day and it said that the ipod was corrupted, so i took it out and pluged it back in again and it worked fine. then i went to charge my ipod on the computer a couple of days later and its not regognised on windows or itunes and will not charge!
    i have reset, restarted and updated etc and nothing has happened. i have read other thru peoples messeges who have simular problems and they say that reinstalling and reseting to factory conditions doesnt work.
    can someone please help me or has any one had the same problem? thanks

    can i put it into disk mode if the computer doesnt recognise it at all?
    Yes, you can.
    "Putting your iPod into disk mode" is simply a process that involves pressing a few buttons on your iPod, getting it into Disk Mode.
    To put your iPod into Disk Mode, follow the steps in this article -> Putting your iPod into Disk Mode
    As Bryan said, see if the iPod is recognized by your computer when it's in disk mode.
    -Kylene
    If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

  • Iphone 5c not recognized by Windows iTunes; cannot sync

    Hi,
    I realize many users are having problems with this same issue on various iOS devices.  I'll note that not only are all of my drivers/systems/software versions up to date, but I've also followed all troubleshootings steps that are commonly given, such as but not limited to:
    http://support.apple.com/kb/TS5254?viewlocale=en_US&locale=en_US
    Additionally I've checked to ensure my AMDS is running with up-to-date drivers, checked for software conflicts, etc.  Regardless of what I've tried the issue remains: iTunes will not detect my device because the device has "timed out."  Ran a diagnostic from iTunes and it merely said it couldn't detect a device.  Also interesting to note is that Windows itself does not seem to detect my phone when connected - but it detects anything else I plug into the USB port.  I cannot sync wirelessly yet as I've never managed to establish a wired sync.
    Could someone please address this issue beyond the standard re-posting of the sync troubleshooting steps?  Obviously these steps are not helping many users, including myself, and I think there must be a larger issue that Apple isn't addressing yet.
    Thanks in advance.

    Hello, chipperp. 
    Thank you for visiting Apple Support Communities. 
    Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue persists, try the troubleshooting steps in the first article below.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • Ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

    ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.  help?

    Hi stitchinstar!
    I have an article for you that will help  you troubleshoot this issue with your iPod and iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for

  • Servlet deployment in Weblogic

    Hi, Its a very simple thing but somehow its not working.Saw many sites ,but the solution is the same.But its still not working..can anyone help. Well..I have written a simple servlet that prints Hello.I am trying to deploy it in Weblogic 6.1.But when

  • How can I make the file download expire like in SendNow?

    In Send Now, you can set up an expiration period for the document so that it is not just hanging out there. I do not see it on Adobe Now. Is this function still available?

  • Additional field e.g  P.O Number field is to be included in AS03

    Hi All, In the Asset master under the tab origin data section, Additional field viz. P.O Number field is to be included, which can link data from MM Module  to Asset module for deriving the figures related to quantity, Amount and asset Name. such as

  • No camera profiles for D90 and D80 files in ACR 8.3?

    Hello, I recently bought in to Adobe's Creative Cloud and downloaded the latest version of Photoshop and ACR. I love the new process and everything about the new Photoshop, however, when I went to re-edit some older images taken with a Nikon D80 and

  • Build and format better than to build and burn?

    I'm going to be burning 15 copies of 2 different single layer dvds through DVDStudioPro. I've tested both discs in this project and they're ok to burn. Reading through my reference material, I don't get a clear sense of what to do next. Should I buil