Discuss on Configure Global Shipping Data - "Document Flow Update"

Dear ALl,
I'm recently looking for the solution on some issue, when i use MIGO to post goods receipt with reference to Inbound delivery, but the inbound delivery status always did not been update by the GR.
I would like to understand more details for the below configuration, can anyone please share and advice the details purpose and pros and cons and if this "Document Flow update" is relevant to my issue where the inbound delivery status not updated by the GR?
SRPO: Logistics Execution -> Shipping -> Basic Shipping Functions -> Configure Global Shipping Data --> "Document Flow Update"
Thank you very much,
Regards,
Chee Wee

Unfortunately I am not on ECC 6.0 and I dont see the field that you mention in my system.
There are quite a few links below, which contains some description about this field, of course provided for some issues.
migo with respect to inbound delivery
creating inbound again after goods were rejected
Inbound Delivery Status Update
http://www.sapfans.com/forums/viewtopic.php?f=6&p=985733
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/link-of-inbound-delivery-and-material-document-3188148
I assume apart from Inbound delivery status updates, other tables like MSEG and document flow tables also gets updated with the inbound delivery number.
Regards,

Similar Messages

  • No document flow updated in Service Order regarding MM flow i.e. PR, PO, GR

    Hello,
    On creating a service order in CRM, the purchase requisition is created automatically in R/3 for the spare parts entered.
    But this PR information is not getting updated in the service order's document flow in CRM.
    I analysed the flow and found that PR gets successfully created and sends back the document flow data to CRM inbound queue.
    The BDoc type involved is CRM_SRV_XTN.
    In it's Extended part, there is a field called ORDERADM_H_GUID which is correctly filled in the BAPIMTCS structure in R/3 which is converted to probably XML format through macro MOVE_CASTING and sent to CRM inbound queue (function module BAPI_CRM_SAVE).
    However, on debugging the respective inbound queue in CRM, I noticed that the field ORDERADM_H_GUID value is not the same as filled in R/3 but some CONSTANT value like 00230023002300560023002300230023 in all the cases.
    Also, FYI, the fieldu2019s value in R3 after conversion looks like as following u2013
    #########################0000000000 ########䣴Ώ삷#耀諣뢮########     48F4038FC0B70093E10080008AE3B8AE
    While in CRM i.e. FM BAPI_CRM_SAVE it looks as follows u2013
    #########################0000000000 ########################     48F4038FC0B70093E10080008AE3B8AE
    So there I feel that the value what is sent from R/3 is not the same as recieved in CRM, on XML conversion.
    Please advise what could be the reason for this anomaly.
    Thanks and regards,
    Manish

    unfortunately document flow in PS is not like in SD
    only in ECP there is a limited possibility
    you can see the line item report and activate the relationship browser which will give the details of the documents related to that posting
    other than that nothing

  • Need no document flow update for sales order create with reference

    Dear All.
    We would like to have the ability to create a sales order with reference to another sales order, and have the document flow of the sales order not updated.
    Unlike the case of a standard create with reference where the documents are linked, in this case there is no relationship between the documents.  The first document is just acting like a template for the remaining documents, to save time during order entry.
    We have turned off update of document flow at the line item level.
    But I don't see a way for us to turn this off at the header (document level).  So wondering if there's another way to turn this off, or possibly through user-exit or VOFM requirement?
    Has anyone else done this?
    I think that CRM has this functionality, but we're still entering orders through ERP-SD.
    Many Thanks!

    Hello Colleague;
    The issue you have reported is SAP standard.  The checkbox "Update Document Flow" (V_TVCPAAP-UPFLU) controls document flow at item level.  If this checkbox is set to blank, there will be no document flow at item level.
    However, the document flow cannot be completely turned off - if the 'update document flow' indicator is blank, you will still see an entry in the document flow, but there will be no update to table VBFA (Sales Document Flow) and the document flow of the predecessor will not be updated at item level (no record in VBFA at item level).                                                                               
    The reason is that the system checks VBAP (Sales Document: Item Data) for fields VGBEL (Document number of the reference document) and VGPOS (Item number of the reference item) for values.  You will always have document flow information on header and item level in the successor because it stores this information in table VBAP.                                                                               
    Related with this issue, you can find a Note 53383 for your review.
    I hope it can clarify the case.
    Regards
    Ruy Castro

  • Block document flow update when creating a new sales document by reference

    Hi,
    I have set up copy rules to copy a quotation to a new quotation. However, my customer does not want the reference quotation to appear in the document flow. Could you please help me with this.
    I have so far:
    - Removed the value from 'Update document flow' in the item
    - Put an empty value in 'Copy item number from reference' and 'Complete reference' at the header level
    Could you please help me,
    Thanks,

    Simply,
    Create sales order (va01)
    Goto  EDIT in menu bar then choose Propose Item or press CTRL + f11 from key board.
    Then provide Sales Document with default with/without quantity or selection list.
    Hope it can assist you.
    Thanks & Regards
    JP

  • DOCUMENT FLOW UPDATING PROCESS

    Hi sap gurus
    I am creating SO { Project billing business process}
    where billing break up - > billing -> a/cing
    non stock item (nlag) : item category
       mat a/c assgn grp( 02) : trading matrial fromstock
    the problem is even the complete a/cing also done successfully also
    but in document Flow it is showing
    for SO  (in process)
    billing ( completed)
    a/c ng ( cleared)
    ???  why in SO status still showing INPROCESS even the billing is done
    pls replay ASAP
    POINTS R TO BE CREDITED FOR ALL GUD RESPONSES

    Hey
    Dear Go to Copy Control VTLA , VTFL and tick mark the document flow indiactor at Item category level.
    ur query will be solved.
    Thanks
    Mk

  • Contact person Rel.ship Data not getting updated in B2B Web User Mngt

    Hi CRM Gurus,
    Need some help on Web User Management functionality.
    Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
    we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
    Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
    Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
    When I chage the contact person's (XXXX) company  from  YYYY to ZZZZ,
    - Relationships of the new assignment for ZZZZ in CRM not getting updated.
    - Old Records in YYYY is not getting deleted (i.e. relationships.
    - There is No relationship data appear in XXXX.
    Appreciate any inputs on the same.
    Thanks,
    Rahul >>>

    Hi Rahul,
    I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
    Cheers,
    Ashok.

  • Can VZW please help me with my IPhone 6  64GB pre-order and tell me if delivery will be 09/19? I recieved a confirmation with that ship date, but no updates or bank activity...thank you

    I just need to know if Delivery will still be 09/19? thanks

    I saw a 09/19, then a 10/07, but now when I check there is no shipping info date, although it says 09/19 down near the bottom, so ????? and people are posting activity already about tracking numbers bank activity etc...

  • Document flow for delivery can not be updated

    Hi all,
    I received goods for a PO and the PO has a subsequent OBD created. When I tried to reverse the GR I got the following error- document flow for delivery can not be updated
    Can you help me understanding why this error occured?
    Thanks,
    Rana

    Hi Rana,
    In ECC 6.0 both ways you can do the goods moments (WRto PO/ Delivery) provided "Document flow update" check box checked in Logistics Execution-Shipping-Basic Shipping Functions-Configure Global Shipping Data
    Please confirm
    Nagesh

  • Document Flow not updated using BAPI_GOODSMVT_CREATE

    Hi Experts,
    I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
    Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
    Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
    Regards,
    Puja.

    Hello Puja,
    Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
    Also refer to the below OSS note.
    http://service.sap.com/sap/support/notes/199703
    Regards,
    Thanga

  • Sale order document flow-u0091Service Documentsu0092 is coming which should't aper

    New Issue with Sales order document flow:
    When linking from a sales order in document flow, we were reviewing why the description information varied.  In looking at different values, we clicked on a new item within document flow that allows you to like to ‘Service Documents’.   This is new in 6.0, or it was previously deactivated in 4.6C.  If you link from a sales order to a service document, in ECC 6.0, you will get a short dump because the document flow is so great (viewing order #any in VA03 and use document flow and then select the service documents button    as seen on the screen below
    A Short dump will occur in program SAPLDOCUMENT_FLOW_ALV.
    Here in ECC 6.0 is how it looks from sales order 9806:
    Documents created from 2004 through 2007 are coming up as linked to this sales order and that is incorrect.  There is some type of linkage issue.  In the 4.6 C environments, the ‘service documents’ link is not visible from document flow.
    Can any body functional / technical Help on this urgent???

    Hi Sanjay,
    Go to the order VA03 --> Environment --> status overview. The exact status of the header and item can be found here. You may have chances to know why the status is being processed.
    Also 
    Check whether you have checked 'document flow update' field at item level in copy control
    Check your settings for completion rule in item category
    If it is due to incorrect status message, run report SDVBUK00. That might fix the error. It is recommended to run this first in test mode.
    Br, Sats.

  • Document flow query

    Hi,
    This query is regarding document flow updating:
    If we observe Update document flow check is only available in VTLA-ITEM, but it is not available in none of copy controls.
    My doubt is how delivery to invoice is updating in doc.flow,
    How Sales order to invoice(If invoice is created w.r.t sales order), how this updating??
    VTAA,VTFF...how these document flow are updating??
    Any suggestion on doubt please...

    Hi Rajk,
    Yes, actually I have faced an issue with an invoice.
    For one particular invoice status showing as cancelled, but the same has not updated in the document flow.  VTFF is maintained same and this was happened with only one invoice.
    If I see from the cancelled invoice I am able to see the doc.flow, but not from the parent invoice  nor so or delivery.
    In my analysis I found that there are no check buttons for doc.flow for VTFL,VTFF and got a doubt and posted the same here to clarify my doubt.
    I have checked in cdhdr,cdpos...etc change logs...but not succeeded...

  • Document flow in p2p/inventory

    Hi experts,
    I have one very basic question...kindly guide me with the document flow with accounting entries and mvt type for each stage;
    PO--qty 100 value 100
    Inbound qty 100
    Receipt-qty 100 value (90+10freight)
    Transit wastage-qty 2
    Return delivery- qty 2
    consider QM is activated
    Invoice receipt both for goods and planned delivery cost
    consumption for REM
    I am asking because the requirement is;
    Is there any way to spread the value of normal transit loss over the Cost of Finished Goods?
    rgds

    Hi Kedu,
    Whenever you want the document flow to be active go to Copy control. For e.g let us see the document flow updation in Sales order to Delivery flow. T-code used is VTLA. Here select the Delivery type & the Sales order type and select on ITEM details. Here select the correct Item category you are using and then view the details. Here you can see a Update Document flow selection Option. Select it. Now try once sales cycle and view the document flow updation.
    Hope the above helps you.
    REWARD if it helps you!!
    Regards,
    Ajinkya

  • Document flow in sales document

    How to activate or deactivate document flow in sales document?

    Hi Kedu,
    Whenever you want the document flow to be active go to Copy control. For e.g let us see the document flow updation in Sales order to Delivery flow. T-code used is VTLA. Here select the Delivery type & the Sales order type and select on ITEM details. Here select the correct Item category you are using and then view the details. Here you can see a Update Document flow selection Option. Select it. Now try once sales cycle and view the document flow updation.
    Hope the above helps you.
    REWARD if it helps you!!
    Regards,
    Ajinkya

  • Fwding agent in Shipping Data fr Stock Transfer of Purchasing Document Item

    Hi,
    I want to know how to configure the Forwarding agent in Shipping Data For Stock Transfer of Purchasing Document Item (ME21N).
    I have used the Forwarding agent as Partner function in Header level but it does not appears in VL10D where we create deliveries from open Purchase orders.
    Regards,
    Abhilash

    Hi,
    Just follow the steps:-
    1) You should check the shipping point assignment under SPRO-> Logistics Execution-> Shipping->Basic Shipping Functions->Shipping points & Goods receiving point determination-> Assign shipping points.
    OR.....
    You may directly check from table also....>
    Put T-code SE16-Table TVSTZ
    Put your plant and shipping point and check the correct assignments.
    2 ) Go to table T001W and check the assignment of customer to plant.And also check the sales area in this table for both Supplying & Receiving plant.
    3) Check wether the customer is in the required sales area or not.
    If still u face problem kindly reply me.
    Regards,
    Savita

  • Document Flow Configuration

    Hi Experts
    I am configuring document flow for Outbound delivery to have Delivery item linked to Delivery, Shipment linked to Delivery and Handling unit linked to Delivery Item.
    I defined one document flow group say Z_DEL1 which has sequence 1 for Delivery Header, 2 for Delivery Item with predecessor Delivery Header, 3 for Shipment with predecessor  Delievry Header and 4 for Handling Unit with predecessor Delivery Item.
    I defined Source and Predecessor document mappings for each of these sequences. Now I defined one multitask EH update activity say Z_DEL_ACT1 with task UPDATE, activity DF_UPDATE_FROM_EH and DF group Z_DEL1.
    I defined this as combined scenario of Delivery and Shipment. Now I have a question, shall I need to assign this EH Upd Act2 field with value Z_DEL_ACT1 for all Event Handler Types related to Delivery Header, Delivery Item, Shipment and Handling Unit or is it sufficient to assign EH Upd Act2 only for Delivery Header?
    The scenario is to configure document flow only for Delivery with successors as delivery item, shipment and handling unit. The document flow net should get updated automatically whenever a shipment is created or handling unit is created.
    Also, I have 2 customized statuses for delivery header document which I need to display in the table of document flow window. I am taking the fields from /SAPTRX/EH_STAT. Shall I need to add these two fields in the structure of relevant document category like addition of these 2 fields in table /1DF/1ODL400?
    I hope I am clear on my questions and please advise as soon as possible on these.
    Thanks
    Ravi

    Hi Steffen, Hi All
    Could you please share any document on how to configure the document flow for the scenario I explained initially?
    I still have a doubt, if I use one document flow group and define one EH update activity and assign the same to Delivery Event Handler Type, will system update the docuemnt flow whenever the Event Handlers for successors of Delivery (like Delivery Item, Shipment, Handling Unit etc) get created in EM system? or Shall I need to assign the same EH update activity to all Event Handler Types which are successors to Delivery?
    I hope I am clear on my question.
    This is really urgent.
    Thanks
    Ravi

Maybe you are looking for