Discussion_ dbsid user - can the password be changed

I have installed OCS as a single server install and have been configuring Oracle Mail and Discussions.
I would like the discussions to be visible through a Novell Groupwise client.
To date I have managed to get my inbox and any other mail folders to display using IMAP and I can send and receive e-mail through this service.
I cannot get the discussions to display as a shared folder. I have created the IMAP entry but have been unable to authorise against the mailstore. they are perfectly visible through the Oracle Web Client.
I am wondering whether the discussion_<dbsid> user needs to accessed, via an alias (I set this in the forum properties) unfortunately I do not know the password.
I do not want to go ahead and change discussion_<dbsid> password as I am not sure if there are side affects and I do not want to reinstall. Is is safe to change this password?
Does anyone know the default construction of this password, I believe it is randomized on creation?
Has anyone experience with changing this password?
Is it safe to do?
Is there any documentation regarding this user other than chapter 5 of Mail Administrators guide and installation notes?
Any help would be appreciated.

Roedmario wrote:
but then, basically, the password protection is worthless..?
Nope, not at all. When they restored your phone, all data on your phone was erased. So, passcode protecting your phone did its job...protected your data...that's its purpose.

Similar Messages

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

How to find the when the password is changed for a system User

Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan K

Vijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit

On the iMac G4 can the processor be changed from 1000mhz to a 1024mhz?

On the iMac G4 can the processor be changed from 1000mhz to a 1024mhz?

It's an old iMac that my parents have and want to install a high seep (speed) Internet modem and it's requiring a 1024mhz
Ignore the requirement. 1000 is close enough to 1024 not to make a difference. They cannot be checking the speed anyway.
You may find youtub videos slow.
What version of mac os?
Here is how to find out what version of Mac OS you are running:
Click on the blue apple in the upper left hand of the screen.
click on this icon
Click on the first line, "About This Mac"
Most of these are numbers & that's what we want.
What version & Processor do you have?
You need 10.4 to get a relatively current web browser.
Opera
http://www.opera.com/browser/download/requirements/
http://www.opera.com/download/
OmniWeb 5.11, which, I believe is built on the same framework as Safari 5,
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
for PPC
tenfourfox
"World's most advanced web browser. Finely tuned for the Power PC."
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
What is my user agent?
http://whatsmyuseragent.com/
A larger list:
http://www.macmaps.com/browser.html

I got my ipod stolen and i got it back but the password is changed how do i get into it

i got my ipod stolen and i got it back but the password is changed how do i get into it

iPod touch User Guide (For iOS 4.3 Software)

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

Can the resolution be changed when taking a photo. When I take a photo it is always 1MEG or more. Like to reduce this so that the photos are easily e-mailed. Any help?

Can the resolution be changed when taking a photo. When I take a photo it is always 1MEG or more. Like to reduce this so that the photos are easily e-mailed. Any help?

When you email a picture from Photos, you can choose the size.
http://i1224.photobucket.com/albums/ee374/Diavonex/3bec08e4423ac97de93d4560186b6 daf.jpg

Hi, after submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?

Hi there,
After submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?
Thanks for your help
Paline

Hi Paline,
Unfortunately this cannot be done.However, being the author of the form you can make the required changes in the response file.
Thanks,
Vikrantt Singh

How do I delete a user when the password was forgotten. I have a OS X Yosemite 10.10.2

How do I delete a user when the password was forgotten. I have a OS X Yosemite 10.10.2

Administrator password forgotten?
OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How can I tell users what the password complexity requirements are in OWA 2013?

I'm writing this question so I can also provide the answer, because I couldn't find an answer online anywhere.
The goal was to edit the password change page to put the complexity requirements on it so users know what's expected when they change their password in OWA (Exchange 2013). I wanted to customize a web page somewhere to tell users what characters they
needed to put in their password to be accepted when we have the complexity requirement turned on in the default domain policy. (The extra words are to help search engines find this when people are searching for a solution to this.)
All I could find were outdated instructions for 2010 and 2007, which did not work.
Answer forthcoming...

The answer I came up with was to edit the "ChangePassword.ascx" file found at C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\PersonalSettings as below:
First, find:
<div>
<asp:Label ID="lblPersonalSettingPasswordAfterChange" Text="<%$ Strings:OwaOption.PersonalSettingPasswordAfterChange %>" runat="server" umc-slabdescription="true"
aria-hidden="false" cssclass="dscrptn"></asp:Label>
</div>
Then, right after that, add your verbage within another DIV tag as such (you can even use an unordered/bulleted list):
<div>
PASSWORD REQUIREMENTS<br />
Your new password must:
<ul><li>be at least 8 characters long,</li>
<li>contain at least one letter (a,b,C,D), </li>
<li>contain at least one number (1,2,3,4), </li>
<li>contain at least one symbol (.*#$@&),</li>
<li>NOT contain your name, </li>
<li>and not have been used before.</li></ul>
<br />
</div>
This works if you're choosing to go change your password, but I still need to see if it works when a change is required at first login - that feature is broken again but I'm hoping CU3 will fix it. Seems MS breaks that feature with every other update.

Invalid User Name and Password after changing the sa Password

Hi All,
I've Installed SAP 9.0 PL 05 ,while installing I've given database details as
User Name : sa
Password : abcd
Installation got success and I could able to log in to listed companies.
But, after I've changed sa user Password in SQL Server
i.e
User Name : sa
Password : xyz
Now , companies are not listed , then I had reset the password in (SAP Business One Service Manager - > Configure Security - > SLD)
When I check after this companies are listing, But
If I try to login with my regular user it is saying
Invalid User Name and Password
for testing purpose I've reset the earlier password for sa and tried., then it is working fine.
does the sa password affecting anywhere?
how can I change my sa password and use normally?
any help or knowledge would be very helpful
Thanks & Regards
M G

Hi,
Please refer SAP note:
1882731 - Cannot Display Company List After Database User Password
Is Changed
Thanks & Regards,
Nagarajan

Can user Reset the Password without Administrator help in MS Exchange server 2013

Hi Team
IT is possible for user to reset the password
in MS Exchange server 2013 without Administrator help? (by getting mobile verification code how we get in Gmail ,& Outlook )
if it is possible ,kindly send me the configuration URL to my Mail ID [email protected] & [email protected]
Thanks & Regards
Dinesh.s
+91 9566958700

You would have to assign Admin role permission to users in EAC.
To understand this concept in more depth, I would refer you at this well described article : http://www.mustbegeek.com/reset-user-password-in-exchange-2013/
Or, you may use any third party like, (http://www.selfservicepasswordreset.org/) that seems to be an appropriate approach in your environment. This tool allows end-users to perform self password reset
and self account unlock from any computer in the network through a web-browser or directly from the login screen without any assistance from the administrator. Administrator can configure strong policy for automatic account unlock and automatic reset
password at a specified time for any particular domain OU's.

My apple id has been disabled. I reset the password and changed the username and still get the same message...can someone help

I cant update my apps. It says that my apple id has been disabled. I have reset the user id and password but yet get the same message. Can someone help me find the missing puzzle piece

you need to contact itunes to get it enabled. they are a email base support group you can go to expresslane.apple.com and email them letting them know what its going on. http://support.apple.com/kb/TS2446

Library in shared folder - users can see, but not change?

We have or music library saved to the shared folder so all of the users in the family can access the music. However, only the original user can make changes (change genre, mark don't include in shuffle, etc.). Is this by design, or should everyone be able to make changes to the music?

This still does not fix it... If you cannot R&W over the folders and the library, you cannot even open the library. I've been looking into the same issue, and have not been successful. I might try what I used for iPhoto and worked beautifully; I have not done so, because if I remember correctly, it was posted that this does not work:
sudo fsaclctl -p / -e
sudo chmod +a "<other user> allow delete,chown,list,search,add_file,\
addsubdirectory,delete_child,file_inherit,directoryinherit" <path to directory>

XI standard users and the passwords?

Anyone with a list of all the standard XI users and their standard password?

Hi Rune,
The XISUPER user has a pwd of XIPASS.
The following service users are created during the installation, and the passwords are specified at that time. You should check with the basis people.
XIREPUSER - User for the Integration Repository
XIDIRUSER - User for the Integration Directory
XIAPPLUSER - User for sender applications
XIRWBUSER - User for the Runtime Workbench
XILDUSER - User for the System Landscape Directory
XIISUSER - User for the Integration Server
XIAFUSER - User for the Adapter Engine (communication between SLD, Integration Server, and Adapter Framework)
LSADMIN - User for the Change Management Server
Cheers
Manish

Discussion_ dbsid user - can the password be changed

Similar Messages

Maybe you are looking for