Discussion Forum: Unable to perform the operation: Row was not found using

Hi all,
I deployed the Discussion Forum and it shows the Portlet with "Creating a product ..". Very fine.
I can create a Product. Fine also.
I can fill in a new Thread, but then, when I try to submit it, I get the error:
Unable to perform the operation: Row was not found using request parameter: 000100000004313437380000012A000000F8FE832E94.
When I click Cancel. I see the Overview of the Products. I drill down to the Threads for my Product and the new thread appears on the list. As soon as I click on the Thread in order to read it the following error appears:
Unable to perform the operation: Row was not found using request parameter: 0001000000043134373800000134000000F8FE832E94.
Any help is appreciated,
Michael

You need to set the Login Frequency (while registering the provider) to 'Once Per Session'. This will allow the portlet to track the user transaction state.
Make sure that you do not bounce the oc4j container in between the portlet operations, since this will leave the transaction into inconsistent state.
You have to ensure that whenever you bounce the oc4j container/provider mid-tier you logout of portal and login again.
This will solve the problem.

Similar Messages

In Printer Services box, i get the message "unable to perform the operation"

HP Officejet H470wbt. Using via bluetooth. i have recently installed a new ink service module and a black toner cartridge. Now I get the following message when trying to view ink levels in the printer services area--"unable to perform the operation"

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

The row was not found at the Subscriber error keeps popup and stopped synchronization even after inserting missing record at subscriber - transcational replication.

The row was not found at the Subscriber error keeps popup and stopped synchronization even after inserting missing record at subscriber - transcational replication.
first error throws: Grab exact sequence number, find row and inserted at subscriber...
Start synchronizing, ran fine for a while, stopped again with error with different exact sequence number, repeat again same as step 1.......
how can we stop this and make it run without this error?
Please advise!!!

Hi,
This means that your database is out of sync. You can use the continue on data consistency error profile to skip errors. However, Microsoft recommends that you use -SkipErrors parameter cautiously and only when you have a good understanding of the following:
What the error indicates.
Why the error occurs.
Why it is better to skip the error instead of solving it.
If you do not know the answers to these items, inappropriate use of the
-SkipErrors parameter may cause data inconsistency between the Publisher and Subscriber. This article describes some problems that can occur when you incorrectly use the
-SkipErrors parameter.
Use the "-SkipErrors" parameter in Distribution Agent cautiously
http://support.microsoft.com/kb/327817/en-us
Here are two similar threads you may refer to:
http://social.technet.microsoft.com/Forums/en-US/af531f69-6caf-4dd7-af74-fd6ebe7418da/sqlserver-replication-error-the-row-was-not-found-at-the-subscriber-when-applying-the-replicated
http://social.technet.microsoft.com/Forums/en-US/f48c2592-bad7-44ea-bc6d-7eb99b2348a1/the-row-was-not-found-at-the-subscriber-when-applying-the-replicated-command
Thanks.
Tracy Cai
TechNet Community Support

HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Could not complete this operation the. File was not found.

I am running Illustrator CS6 on a Mac version 10.9.1. My problem is that when I try to "Save for Web" I get an error message of:
"Could not complete this operation the. File was not found."
What is it even talking about?!? It can save it normally, but not as a .jpg, .png, etc.
I just restarted the program (but this isn't the first time I received this error). Now it says something new:
Some names of the files being saved contain non-Latic characters. These file names will be incompatible with some Web browsers and servers.
I simply named the file "6.png"
That time it did allow me to save though. What is going on!??

+1
I am getting the same error message for "Save for Web" on Adobe Illustrator CS6 on my Macbook Pro Version 10.10
"Could not complete this operation the. File was not found."
Frustrating

Unable to connect to the analysis server the server name was not found

Hi,
One of the user is trying to run reports from PWA 2010 and gets the below error.
Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
Please advice why?

Dear Project Help,
Please help the community with more information.
Which kind of reports are you running? Excel using OLAP?
If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
Let me know if you need any help on this.
Cheers

I cannot get it. 10 times already to receive new passwords today. Adove Download Assistant says "Unable to invoke CFC - The method login was not found in component tdrc.tdrcfacade.

I cannot get it. 10 times already to receive new passwords today. Adove Download Assistant says "Unable to invoke CFC - The method login was not found in component tdrc.tdrcfacade.
What can I do? My problem was started from installing Adobe Reader. It says "Done OK" but never installed.
Elena
e. [email protected]

Try using the offline installer from http://get.adobe.com/reader/enterprise/

Updating hybrid configuration failed - Kerberos authentication: The network path was not found

I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
When I run the Manage Hybrid Configuration, I receive the following error:
Updating hybrid configuration failed with error
'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
path was not found.
The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
[1/5/2014 21:21:1] INFO:Opening runspace to
http://[servername]/powershell?serializationLevel=Full
[1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
[1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.RunspacePool.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
   at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
I have sought help, posting on the forum at community.office365.com -
http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
Has anyone else come across this problem running the Hybrid Configuration Wizard?

Hello Darrell,
Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
looks good.
As the article states you can run the Exchange BPA and it will check if any of these exist as well.

SCOM agent install fails Error 80070035 - the network path was not found

I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
Thanks

Hi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801

Error when deploying BPM application: The specified process was not found

Hi,
I was trying to deploy a simple BPM application to a SOA Server, when I got the following error:
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
[04:55:19 PM] HTTP error code returned [500]
[04:55:19 PM] Error message from server:
There was an error deploying the composite on WLS_SOA2: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=myadress:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details.
[04:55:19 PM] Check server log for more details.
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
The log file in the server console shows this:
Error during deployment oracle.fabric.common.FabricException: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=192.168.168.231:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details at oracle.integration.platform.blocks.deploy.CompositeDeploymentCoordinatorMessages.throwOperationFailedOnNode(CompositeDeploymentCoordinatorMessages.java:132) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.submitRequestAndWaitForCompletion(CoherenceCompositeDeploymentCoordinatorImpl.java:351) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(CoherenceCompositeDeploymentCoordinatorImpl.java:214) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Restart the server as I found in some pages and even a thread here (https://forums.oracle.com/thread/1557156) is not the better solution, the real issue still unknown. I need to find a solution without restarting the server machine.
Thanks,
AAPDL

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

Music video that I PURCHASED says the requested url was not found on this server...***?

When I go to play music videos that I PURCHASED from iTunes I get a pop-up that says "The reuested URL was not found on this server" so I have to go to friggin' iTunes and remove and readd all of my music videos. I bought the ipod (Touvh 4G) about a month ago and the idiots say that it's out of warranty so I have to pay more money to the pirates to get an answer. Is there something I can do to keep this crap from happening?

This previous discussion has a solution:
https://discussions.apple.com/message/16527576#16527576

Download from loop masters says "The requested URL was not found on this server.

I'm downloading some audio files from http://www.loopmasters.com/ but whenever I try, in the download progress in the top right corner of safari, it'll stop downloading and say "The requested URL was not found on this server." There doesn't seem to be any rhyme or reason as to where in the download it'll stop. The first time got 37.3% of the way through, the second time got barely 12% (but my computer went to sleep this time,) and the last time it got to 34.8%. I can't do any more attempts because this website will only let me download it five times. Is there anything that's going wrong on my end, perhaps? Or is it likely just their servers being all wonky?
Let me know if you need any other information :]

This previous discussion has a solution:
https://discussions.apple.com/message/16527576#16527576

Uploaded music videos to my new ipad and when I try to play it, it says the requested url was not found on this server.

When I uploaded music videos to my new ipad mini and when I try to play it, it says "the requested url was not found on this server.
the Video will not play.

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

Music - The requested URL was not found on this server

Hi
I have brought iphone 5 and most of all my songs are brought from itunes, I can not play my music application - everytime I click on a song to play I get an error message saying - "The requested URL was not found on this server" also all my music were not downloads into my iphone 5 from iphone 4. What can I do, please direct me. I have backed up my music and photos on my laptop, even my itune isn't showing all the music i purchased with apple.

This previous discussion has a solution:
https://discussions.apple.com/message/16527576#16527576

Discussion Forum: Unable to perform the operation: Row was not found using

Similar Messages

Maybe you are looking for